Merge branch 'kamp' into develop. Moved imports into osskc.cfg.

Prepare flash section

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,34 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: "[BUG]"
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**What kind of device are you using to host Klipper?**
+ - OS: [e.g. old laptop, PC, Raspberry Pi]
+ - Version: []
+
+**How did you install Klipper?**
+ - Manual install, KIAUH, MainsailOS, FluiddPi, etc.
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.vscode/settings.json

@@ -4,5 +4,33 @@
 	"editor.detectIndentation": false,
 	"git.mergeEditor": false,
 	"spellright.language": ["en-GB-10-1."],
-	"spellright.documentTypes": ["markdown", "plaintext"]
+	"spellright.documentTypes": ["markdown", "plaintext"],
+	"cSpell.words": [
+        "ADXL",
+        "blanchas",
+        "cfgs",
+        "Fluidd",
+        "Fluiddpi",
+        "gcode",
+        "githubstar",
+        "hotend",
+        "KIAUH",
+        "Klipper",
+        "Klipperized",
+        "lrwxrwxrwx",
+        "moonraker",
+        "octahedroflake",
+        "PARKBED",
+        "PARKCENTER",
+        "PARKFRONT",
+        "PARKFRONTLOW",
+        "PARKREAR",
+        "pico",
+        "Prusa",
+        "runout",
+        "Sovol"
+    ],
+	"[markdown]": {
+		"editor.formatOnSave": false
+	}
 }

CODE_OF_CONDUCT.md

@@ -0,0 +1,128 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, religion, or sexual identity
+and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the
+  overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+bassamanator.2cj4t@simplelogin.com.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series
+of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or
+permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior,  harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within
+the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at
+https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at
+https://www.contributor-covenant.org/translations.

CONTRIBUTING.md

@@ -0,0 +1,8 @@
+# Contribution Guidelines
+
+When contributing, please ...
+- provide a clear and concise explanation of your pull request.
+- try to make small changes, ie, make many small pull requests as opposed to a single large pull request. This allows me to check your work more quickly, thus merge more quickly.
+- try to follow the patterns I've already established.
+
+Thank you.

README.md

@@ -1,9 +1,342 @@
-# 🚨 *One-Stop-Shop* Sovol SV06 Klipper Configuration 🏎️
+# 🚨 _One-Stop-Shop_ Klipper Configuration
 
-## This branch contains my personal settings.
+This branch contains the Klipper configuration and firmware for the **Sovol SV06** 3D printer.
 
-## Please refer to the [master](https://github.com/bassamanator/Sovol-SV06-firmware/tree/master) branch to download the recommended Klipper configuration for the SV06.
+| Printer                     | Branch                                                                                    |
+| --------------------------- | ----------------------------------------------------------------------------------------- |
+| Sovol SV06                  | ✨**You are here**✨                                                                      |
+| Sovol SV06 Skr-Mini-E3-V3.0 | [skr-mini-e3-v3](https://github.com/bassamanator/Sovol-SV06-firmware/tree/skr-mini-e3-v3) |
+| Sovol SV06 Plus             | [sv06-plus](https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus)           |
+| All other printers          | [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer)       |
 
-## For all other printers running Klipper, please refer to the [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer) branch to download the OSS Klipper configuration.
+I am creating these files for my personal use and cannot be held responsible for what it might do to your printer. Use at your own risk.
 
-<img src="./images/octahedroflake.jpg" />
+## Outline
+
+- [Features](#features)
+- [Stay Up-to-Date](#stay-up-to-date)
+- [Preface](#preface)
+- [Before You Begin](#before-you-begin)
+- [Klipper Installation](#klipper-installation)
+  - [Flash Firmware](#flash-firmware)
+  - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
+- [Initial Steps](#initial-steps)
+  1. [Adjust Configuration with MCU Path](#adjust-configuration-with-mcu-path)
+  2. [Configure Your Printer](#configure-your-printer)
+- [Adjust Your Slicer](#adjust-your-slicer)
+- [Directory Structure](#directory-structure)
+- [Support Me](#support-me)
+- [FAQ](#faq)
+- [Useful Resources](#useful-resources)
+- [Sovol Official Links](#sovol-official-links)
+- [Sources](#sources)
+
+## Features
+
+- 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥
+- <img src="./images/party_blob.gif" width="20" alt=''/> Filament runout sensor usage implemented. <img src="./images/party_blob.gif" width="20" alt=''/>
+- Minimum configuration settings for Mainsail/Fluiddpi to work.
+- SuperSlicer config bundle that contains the printer configuration, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)). Find the differences between the different print setting profiles [here](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles/tree/master/SuperSlicer). But basically, the 45 degree profile places the seam at the back.
+- Bed model and texture to use in SuperSlicer/PrusaSlicer.
+- Macros
+  - **Improved** mechanical gantry calibration/`G34` macro that provides the user audio feedback, and time to check the calibration.
+  - Misc macros: `PRINT_START`, `CANCEL_PRINT`, `PRINT_END`, `PAUSE`, `RESUME`.
+  - Parking macros (parks the printhead at various locations): `PARKFRONT`, `PARKFRONTLOW`, `PARKREAR`, `PARKCENTER`, `PARKBED`.
+  - Load/unload filament macros.
+  - Purge line macro.
+
+## Stay Up-to-Date
+
+Watch for releases and updates.
+
+<img src="./images/githubstar.gif" width="500" alt='Raspberry Pi'/>
+
+## Preface
+
+Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience.
+
+## Before You Begin
+
+- Read this documentation _fully!_
+- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned.
+- Follow the steps in order.
+- If an error was reported at a step, do no proceed to the next step.
+- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
+- It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
+- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
+- Robert Redford's performance in _Spy Game (2001)_ was superb!
+- It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you.
+- Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
+- I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration.
+
+## Klipper Installation
+
+### Flash Firmware
+
+💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._
+
+Please note:
+
+- For the sake of simplicity, I will refer to the klipper firmware file as `klipper.bin` even though the actual filename is something along the lines of `klipper-v0.11.0-148-g52f4e20c.bin`.
+- The firmware file is located in the `misc` folder.
+- Flashing will only work if current firmware filename is _different from previous flashing procedure_. The `.bin` is also important.
+- Many users have reported having issues flashing Klipper using the Sovol microSD card.
+
+#### 1. Prepare the microSD Card for Flashing with These Parameters
+
+- Size: `16GB` maximum.
+- File system: `FAT32`.
+- Allocation unit size: `4096 bytes`.
+- Must not contain any files _except_ the firmware file.
+
+#### 2. Flashing Procedure
+
+1. Disconnect any USB cables that might be connected to the motherboard.
+2. Copy `klipper.bin` to the microSD card.
+3. Make sure the printer is off.
+4. Insert the microSD card into printer.
+5. Turn on the printer and wait a minute (usually takes 10 seconds).
+6. Turn off the printer and remove the microSD.
+
+You may find this [video](https://youtu.be/p6l253OJa34) useful.
+
+### Download OSS Klipper Configuration
+
+You can choose _either_ of the 2 following methods.
+
+#### Method 1: Clone the Repository
+
+1. `cd ~/printer_data/config`
+2. Empty entire `~/printer_data/config` folder.
+   - In linux, you can delete files via `rm fileName` and directories via `rmdir directoryName`.
+3. `git clone -b master --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .` ⚠️ Don't miss the period!
+
+#### Method 2: Download the ZIP
+
+1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/master.zip) the `ZIP` file containing the Klipper configuration.
+2. See `Step 2` in `Method 1`.
+3. The parent folder in the `ZIP` is `Sovol-SV06-firmware-master`. This is relevant in the next step.
+4. Extract **only** the _contents_ of the parent folder into `~/printer_data/config`.
+
+## Initial Steps
+
+### Adjust Configuration with MCU Path
+
+1. Find what port the `mcu` (printer motherboard) is connected to via `ls -l /dev/serial/by-id/` or `ls -l /dev/serial/by-path/`.
+   1. The output will be something along the lines of
+      `lrwxrwxrwx 13 root root  22 Apr 11:10  usb-1a86_USB2.0-Serial-if00-port0 -> ../../ttyUSB0`.
+   2. `usb-1a86_USB2.0-Serial-if00-port0` is the relevant part.
+   3. Therefore, the full path to your `mcu` is either `/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0` or `/dev/serial/by-path/usb-1a86_USB2.0-Serial-if00-port0`, depending on the command you used to find the `mcu`.
+2. Adjust the `[mcu]` section in `printer.cfg` accordingly.
+   This is just an _example_ `mcu` section:
+
+   ```
+   [mcu]
+   serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+   restart_method: command
+   ```
+
+3. Do a `FIRMWARE_RESTART`.
+
+If you've done everything correctly, you should see no errors or warnings in your Mainsail/Fluidd dashboard.
+
+### Configure Your Printer
+
+❗☠️ **Your finger should be on the power switch for most of these steps** ☠️❗
+
+❗☠️ **Power off if there is a collision/problem** ☠️❗
+
+💡 I recommend no filament be loaded for any of these steps.
+
+💡 Find explanations for gcode commands at [https://marlinfw.org/](https://marlinfw.org/) and [https://www.klipper3d.org/](https://www.klipper3d.org/G-Codes.html).
+
+You will be pasting/typing these commands into the Mainsail/Fluidd console.
+
+1. Check to see if `X` and `Y` max positions can be reached, and adjust `position_max`, if necessary. You might be able to go further, which is great, but I recommend leaving a 2mm gap for safety.
+   1. `G28`
+   2. `G90`
+   3. `G1 X223 F3000`
+   4. `G1 Y223 F3000`
+2. Do a mechanical gantry calibration; `G34`. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. You will hear a succession of beeps.
+   1. Figure out your `Z` `position_max` by baby stepping your way up to the beam, and adjust `position_max`, if necessary.
+3. PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at.
+   1. `PID_TEST_BED TEMP=70`
+   2. `SAVE_CONFIG` (once completed)
+4. PID tune the extruder while part cooling fan runs at 25%.
+   1. `PID_TEST_HOTEND TEMP=245`
+   2. `SAVE_CONFIG` (once completed)
+5. Adjust `z_offset`. Make sure your nozzle if very clean. Do the [Paper test](https://www.klipper3d.org/Bed_Level.html?h=probe_calibrate#the-paper-test).
+   1. `DO_PROBE_CALIBRATE`
+   2. Follow `z_offset` setup in Mainsail/Fluidd.
+   3. `SAVE_CONFIG` (once completed)
+6. Create a bed mesh.
+   1. `DO_CREATE_MESH`
+   2. `SAVE_CONFIG` (once completed)
+
+If you've made it here, then your printer has been Klipperized, and is ready to print!
+
+But first, adjust your slicer.
+
+## Adjust Your Slicer
+
+You need to adjust the start and end gcode in your slicer. The relevant macros are `PRINT_START` and `PRINT_END`. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code).
+
+If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`. Here's an example:
+
+```
+PRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]
+PURGE_LINE
+```
+
+## Directory Structure
+
+This repository contains many files and folders. Some are _necessary_ for this Klipper configuration to work, others are not.
+
+- **Necessary** items are marked with a ✅.
+- Items that can _optionally_ be deleted are marked with a ❌.
+
+```
+├── cfgs ✅
+│   ├── adxl-direct.cfg
+│   ├── adxl-rp2040.cfg
+│   ├── adxl-rpi-pico-2x.cfg
+│   ├── MECHANICAL_GANTRY_CALIBRATION.cfg
+│   ├── misc-macros.cfg
+│   ├── PARKING.cfg
+│   └── TEST_SPEED.cfg
+├── CODE_OF_CONDUCT.md ❌
+├── CONTRIBUTING.md ❌
+├── .github ❌
+│   ├── FUNDING.yml
+│   └── ISSUE_TEMPLATE
+│       ├── bug_report.md
+│       └── feature_request.md
+├── .gitignore ❌
+├── images ❌
+│   ├── cup-border.png
+│   ├── githubstar.gif
+│   ├── heart.gif
+│   ├── logo_white_stroke.png
+│   └── party_blob.gif
+├── misc ❌
+│   ├── klipper-v0.11.0-148-g52f4e20c.bin
+│   ├── M503-output.yml
+│   ├── marlin-SV06V2.0.0A_2.24.bin
+│   ├── SuperSlicer_config_bundle.ini
+│   ├── sv06-buildPlate.png
+│   ├── SV06-buildPlate.stl
+│   └── SV06-texture.svg
+├── moonraker.conf ✅
+├── printer.cfg ✅
+├── README.md ❌
+└── .vscode ❌
+    └── settings.json
+```
+
+## Support Me
+
+Please ⭐ star ⭐ this repository!
+
+If you found my work useful, please consider buying me a [<img src="./images/logo_white_stroke.png" height="20" alt='Ko-fi'/>](https://ko-fi.com/bassamanator).
+
+## FAQ
+
+##### How do I import a SuperSlicer configuration bundle (`SuperSlicer_config_bundle.ini`) into SuperSlicer?
+
+Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13).
+
+##### How do I print using SuperSlicer?
+
+Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/14).
+
+##### When does beeping occur?
+
+The printer will beep upon:
+
+- Filament runout.
+- Filament change/`M600`.
+- Upon `PRINT_END`.
+- `MECHANICAL_GANTRY_CALIBRATION`/`G34`.
+
+##### How do I disable beeping?
+
+Make the following changes according to your needs. All beeping will be disabled _except_ during gantry calibration.
+
+| File            | `cfgs/misc-macros.cfg`     |
+| --------------- | -------------------------- |
+| Section         | `[gcode_macro _globals]`   |
+| Variable        | `variable_beeping_enabled` |
+| Disable beeping | `0`                        |
+| Enable beeping  | `1`                        |
+
+##### I want to use a filament sensor. How do I set it up?
+
+You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor).
+
+##### I have a simple filament sensor connected. How do I enable/disable it?
+
+Make the following changes according to your needs.
+
+| File           | `cfgs/misc-macros.cfg`             |
+| -------------- | ---------------------------------- |
+| Section        | `[gcode_macro _globals]`           |
+| Variable       | `variable_filament_sensor_enabled` |
+| Disable sensor | `0`                                |
+| Enable sensor  | `1`                                |
+
+##### My filament runout sensor works, but I just started a print without any filament loaded. What gives?
+
+A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps.
+
+##### What happens when I put in `M600`/colour change at a certain layer?
+
+1. The printer will beep 3 times (not annoyingly).
+2. Printing will stop.
+3. The printhead will park itself front center.
+4. The hotend will turn off, but the bed will remain hot.
+
+##### What happens when I pause a print?
+
+Same behaviour as `M600`/colour change _except_ there won't be any beeping.
+
+##### What happens when filament runs out?
+
+_If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying.
+
+##### How do I resume a print after a colour change or filament runout?
+
+⚠️ _Do not disable the stepper motors during this process!_
+
+The printhead is now parked front center waiting for you to insert filament. You will:
+
+1. Heat up the hotend to the desired temperature.
+   - Use your Klipper dashboard.
+2. Purge (push) some filament through the nozzle.
+   - Use your Klipper dashboard, and extrude maybe 50mm (for a colour change you probably want to extrude more).
+   - OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_.
+3. Hit resume in your Klipper dashboard.
+
+## Useful Resources
+
+- [Everything Sovol SV06](https://github.com/bassamanator/everything-sovol-sv06)
+- [RP2040-Zero ADXL345 Connection Klipper](https://github.com/bassamanator/rp2040-zero-adxl345-klipper)
+- ⭐⭐⭐⭐⭐ [Ellis' Print Tuning Guide](https://ellis3dp.com/Print-Tuning-Guide)
+- [Simplify3D Print Quality Troubleshooting Guide](https://www.simplify3d.com/resources/print-quality-troubleshooting/)
+
+## Sovol Official Links
+
+- [SV06 Marlin Source Code](https://github.com/Sovol3d/Sv06-Source-Code)
+- [SV06 Models](https://github.com/Sovol3d/SV06-Fully-Open-Source)
+- [SV06 Plus Marlin Source Code and Models](https://github.com/Sovol3d/SV06-PLUS)
+
+## Sources
+
+- https://www.klipper3d.org
+- https://ellis3dp.com/Print-Tuning-Guide
+- https://github.com/strayr/strayr-k-macros
+- https://docs.vorondesign.com/build/software/miniE3_v20_klipper.html
+- https://github.com/spinixguy/Sovol-SV06-firmware
+- https://www.printables.com/model/378915-sovol-sv06-buildplate-texture-and-model-for-prusas
+- https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles
+
+[![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/H2H0HIHTH)

cfgs/CALIBRATION.cfg

@@ -0,0 +1,49 @@
+[gcode_macro PID_TEST_BED]
+gcode:
+    # Parameters
+    {% set TARGETTEMP = params.TEMP|default(70)|int %}
+    
+    {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
+    {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
+    G28
+    G90
+    G1 X{max_x/2} Y{max_y/2} Z40 F6000
+    PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}
+
+[gcode_macro PID_TEST_HOTEND]
+gcode:
+    # Parameters
+    {% set TARGETTEMP = params.TEMP|default(245)|int %}
+    
+    {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
+    {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
+    G28
+    G90
+    G1 X{max_x/2} Y{max_y/2} Z10 F6000
+    M106 S64
+    PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}
+
+# TODO test this
+[gcode_macro PID_TEST_ALL]
+gcode:
+    PID_TEST_BED
+    PID_TEST_HOTEND
+    SAVE_CONFIG
+
+[gcode_macro DO_PROBE_CALIBRATE]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
+    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
+    TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
+    G28
+    PROBE_CALIBRATE
+
+[gcode_macro DO_CREATE_MESH]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
+    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
+    TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
+    G28
+    _BED_MESH_CALIBRATE

cfgs/adxl-rpi-pico-2x.cfg

@@ -0,0 +1,43 @@
+#####################################################################
+#   Config that supports a print head and a bed sensor at the same time
+#   This requires a Raspberry Pi Pico.
+#   Instructions: https://klipper.discourse.group/t/raspberry-pi-pico-adxl345-portable-resonance-measurement/1757/9
+#   TLDR Instructions: The two sensors should use the spi0a (GPIO 0-3) and spi1a (GPIO 9-12) buses, respectively.
+#
+#   Recommended mounts: 
+#   https://www.printables.com/model/385334-sovol-sv06-adxl345-mount-printhead-and-bed
+#
+#   ADXL345 related Settings 
+#   https://www.klipper3d.org/Measuring_Resonances.html#adxl345
+#####################################################################
+
+[mcu RP2040]
+baud: 115200
+restart_method: command
+# Obtain definition by "ls -l /dev/serial/by-id/"
+serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
+
+[adxl345 head]
+cs_pin: RP2040:gpio1
+spi_bus: spi0a
+# update axes_map if your sensor is oriented differently. Note the print on your sensor.
+# -y, -z, x means that
+#  - the x axis of your printer corresponds to the sensor's negative y axis
+#  - the y axis of your printer corresponds to the sensor's negative z axis
+#  - the z axis of your printer corresponds to the sensor's x axis
+axes_map: -y, -z, x
+
+[adxl345 bed]
+cs_pin: RP2040:gpio9
+spi_bus: spi1a
+
+[resonance_tester]
+accel_chip_x: adxl345 head
+accel_chip_y: adxl345 bed
+probe_points: 111.5, 111.5, 20
+
+[gcode_macro ADX]
+description: Shortcut to ACCELEROMETER_QUERY for both sensors
+gcode:
+    ACCELEROMETER_QUERY CHIP=head
+    ACCELEROMETER_QUERY CHIP=bed

cfgs/kamp/Adaptive_Meshing.cfg

@@ -0,0 +1,104 @@
+# # # Klipper Adaptive Meshing # # #
+
+# Heads up! If you have any other BED_MESH_CALIBRATE macros defined elsewhere in your config, you will need to comment out / remove them for this to work. (Klicky/Euclid Probe)
+# You will also need to be sure that [exclude_object] is defined in printer.cfg, and your slicer is labeling objects.
+# This macro will parse information from objects in your gcode to define a min and max mesh area to probe, creating an adaptive mesh!
+# This macro will not increase probe_count values in your [bed_mesh] config. If you want richer meshes, be sure to increase probe_count. We recommend at least 5,5.
+
+[gcode_macro BED_MESH_CALIBRATE]
+rename_existing: _BED_MESH_CALIBRATE
+gcode:
+
+    {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}                                # Gather all object points
+    {% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}                                                          # Get bed mesh min from printer.cfg
+    {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}                                                          # Get bed mesh max from printer.cfg
+    {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}                                                        # Get probe count from printer.cfg
+    {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}                                           # Pull verbose setting from _KAMP_Settings
+    {% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}                                               # Pull mesh margin setting from _KAMP_Settings
+    {% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}                                               # Pull fuzz amount setting from _KAMP_Settings
+    {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}                                             # If probe count is only a single number, convert it to 2. E.g. probe_count:7 = 7,7
+    {% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}                            # Determine max probe point distance
+    {% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}                            # Determine max probe point distance
+    {% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}                                                # Set x_min from smallest object x point
+    {% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}                                                # Set y_min from smallest object y point
+    {% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}                                                # Set x_max from largest object x point
+    {% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}                                                # Set y_max from largest object y point
+
+    {% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}                                                          # Set fuzz_range between 0 and fuzz_amount
+    {% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}            # Adapt x_min to margin and fuzz constraints
+    {% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}            # Adapt y_min to margin and fuzz constraints
+    {% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}            # Adapt x_max to margin and fuzz constraints
+    {% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}            # Adapt y_max to margin and fuzz constraints
+
+    {% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}          # Define probe_count's x point count and round up
+    {% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}          # Define probe_count's y point count and round up
+
+    {% if (([points_x, points_y]|max) > 6) %}                                                                                       # 
+        {% set algorithm = "bicubic" %}                                                                                             # 
+        {% set min_points = 4 %}                                                                                                    # 
+    {% else %}                                                                                                                      # Calculate if algorithm should be bicubic or lagrange
+        {% set algorithm = "lagrange" %}                                                                                            # 
+        {% set min_points = 3 %}                                                                                                    # 
+    {% endif %}                                                                                                                     # 
+
+    {% set points_x = [points_x, min_points]|max %}                                                                                 # Set probe_count's x points to fit the calculated algorithm
+    {% set points_y = [points_y, min_points]|max %}                                                                                 # Set probe_count's y points to fit the calculated algorithm
+    {% set points_x = [points_x, probe_count[0]]|min %}
+    {% set points_y = [points_y, probe_count[1]]|min %}
+
+    {% if verbose_enable == True %}                                                                                                 # If verbose is enabled, print information about KAMP's calculations
+
+        { action_respond_info( "Algorithm: {}.".format(                                                                              
+            (algorithm),                                                                                                            
+        )) }
+
+        { action_respond_info("Default probe count: {},{}.".format(                                                                  
+            (probe_count[0]),                                                                                                       
+            (probe_count[1]),                                                                                                       
+        )) }
+
+        { action_respond_info("Adapted probe count: {},{}.".format(                                                                  
+            (points_x),                                                                                                             
+            (points_y),                                                                                                             
+        )) }                                                                                                              
+
+        {action_respond_info("Default mesh bounds: {}, {}.".format(                                                                  
+            (bed_mesh_min[0],bed_mesh_min[1]),                                                                                      
+            (bed_mesh_max[0],bed_mesh_max[1]),                                                                                      
+        )) }
+
+        {% if mesh_margin > 0 %}                                                                                                    
+            {action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(                                       
+                (mesh_margin),                                                                                                      
+                (mesh_margin),                                                                                       
+            )) }                                                                                                                    
+        {% else %}                                                                                                                  
+            {action_respond_info("Mesh margin is 0, margin not increased.")}                                                        
+        {% endif %}                                                                                                                 
+
+        {% if fuzz_amount > 0 %}                                                                                                    
+            {action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(                                     
+                (fuzz_amount),                                                                                                      
+            )) }                                                                                                                    
+        {% else %}                                                                                                                  
+            {action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}                                                      
+        {% endif %}                                                                                                                 
+
+        { action_respond_info("Adapted mesh bounds: {}, {}.".format(                                                                 
+            (adapted_x_min, adapted_y_min),                                                                                         
+            (adapted_x_max, adapted_y_max),                                                                                         
+        )) }
+
+        {action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
+
+    {% endif %}
+
+    {% if probe_dock_enable == True %}
+        {attach_macro}                                                                                                              # Attach/deploy a probe if the probe is stored somewhere outside of the print area
+    {% endif %}
+
+    _BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
+
+    {% if probe_dock_enable == True %}
+        {detach_macro}                                                                                                              # Detach/stow a probe if the probe is stored somewhere outside of the print area
+    {% endif %}                                                                                                                     # End of verbose

cfgs/kamp/KAMP_Settings.cfg

@@ -0,0 +1,31 @@
+# Below you can include specific configuration files depending on what you want KAMP to do:
+
+[include ./Adaptive_Meshing.cfg]       # Include to enable adaptive meshing configuration.
+# [include ./KAMP/Line_Purge.cfg]             # Include to enable adaptive line purging configuration.
+
+[gcode_macro _KAMP_Settings]
+description: This macro contains all adjustable settings for KAMP 
+
+# The following variables are settings for KAMP as a whole.
+variable_verbose_enable: True               # Set to True to enable KAMP information output when running. This is useful for debugging.
+
+# The following variables are for adjusting adaptive mesh settings for KAMP.
+variable_mesh_margin: 0                     # Expands the mesh size in millimeters if desired. Leave at 0 to disable.
+variable_fuzz_amount: 0                     # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Leave at 0 to disable.
+
+# The following variables are for those with a dockable probe like Klicky, Euclid, etc.                 # ----------------  Attach Macro | Detach Macro
+variable_probe_dock_enable: False           # Set to True to enable the usage of a dockable probe.      # ---------------------------------------------
+variable_attach_macro: 'Attach_Probe'       # The macro that is used to attach the probe.               # Klicky Probe:   'Attach_Probe' | 'Dock_Probe'
+variable_detach_macro: 'Dock_Probe'         # The macro that is used to store the probe.                # Euclid Probe:   'Deploy_Probe' | 'Stow_Probe'
+                                                                                                        # Legacy Gcode:   'M401'         | 'M402'
+
+# The following variables are for adjusting adaptive purge settings for KAMP.
+variable_purge_height: 0.8                  # Z position of nozzle during purge, default is 0.8.
+variable_tip_distance: 0                    # Distance between tip of filament and nozzle before purge. Should be similar to PRINT_END final retract amount.
+variable_purge_margin: 10                   # Distance the purge will be in front of the print area, default is 10.
+variable_purge_amount: 30                   # Amount of filament to be purged prior to printing.
+variable_flow_rate: 12                      # Flow rate of purge in mm3/s. Default is 12.
+
+gcode: # Gcode section left intentionally blank. Do not disturb.
+
+    {action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

cfgs/kamp/Line_Purge.cfg

@@ -0,0 +1,113 @@
+[gcode_macro LINE_PURGE]
+description: A purge macro that adapts to be near your actual printed objects
+gcode:
+    # Get relevant printer params
+    {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
+    {% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
+    
+    # Use firmware retraction if it is defined
+    {% if printer.firmware_retraction is defined %}
+        {% set RETRACT = G10 | string %}
+        {% set UNRETRACT = G11 | string %}
+    {% else %}
+        {% set RETRACT = 'G1 E-.5 F2100' | string %}
+        {% set UNRETRACT = 'G1 E.5 F2100' | string %}
+    {% endif %}
+
+    # Get purge settings from _Kamp_Settings
+    {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
+    {% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
+    {% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
+    {% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
+    {% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
+    {% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
+
+
+    # Calculate purge origins and centers from objects
+    {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}    # Get all object points
+    {% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}                          # Object x min
+    {% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}                          # Object x max
+    {% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}                          # Object y min
+    {% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}                          # Object y max
+
+    {% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}      # Create center point of purge line relative to print on X axis
+    {% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}      # Create center point of purge line relative to print on Y axis
+
+    {% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}                                  # Add margin to x min, compare to 0, and choose the larger
+    {% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}                                  # Add margin to y min, compare to 0, and choose the larger
+
+    # Calculate purge speed
+    {% set purge_move_speed = (flow_rate / cross_section) * 60 | float %}
+
+    {% if cross_section != 5 %}
+
+        {action_respond_info("[Extruder] max_extrude_cross_section is not configured correctly, please set it to 5. Purge skipped.")}
+
+    {% else %}
+
+        {% if verbose_enable == True %}
+
+        {action_respond_info("Moving filament tip {}mms".format(                                                                 
+            (tip_distance),                                                                                      
+        )) }
+        {% endif %}
+
+        {% if printer.firmware_retraction is defined %}
+            {action_respond_info("KAMP purge is using firmware retraction.")}
+        {% else %}
+            {action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
+        {% endif %}
+
+        {% if purge_y_origin > 0 %}
+        
+            {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(                                                                 
+                (purge_x_center),
+                (purge_y_origin),
+                (purge_amount),
+                (flow_rate),
+            )) }
+    
+        {% else %}
+    
+            {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(                                                                 
+                (purge_x_origin),
+                (purge_y_center),
+                (purge_amount),
+                (flow_rate),
+            )) }
+
+        {% endif %}
+
+        {% if purge_y_origin > 0 %}                                                             # If there's room on Y, purge along X axis in front of print area
+
+            G92 E0                                                                              # Reset extruder
+            G0 F{travel_speed}                                                                  # Set travel speed
+            G90                                                                                 # Absolute positioning
+            G0 X{purge_x_center} Y{purge_y_origin}                                              # Move to purge position
+            G0 Z{purge_height}                                                                  # Move to purge Z height
+            M83                                                                                 # Relative extrusion mode
+            G1 E{tip_distance} F{purge_move_speed}                                              # Move filament tip
+            G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}             # Purge line
+            {RETRACT}                                                                           # Retract
+            G92 E0                                                                              # Reset extruder distance
+            M82                                                                                 # Absolute extrusion mode
+            G0 Z{purge_height * 2} F{travel_speed}                                              # Z hop
+
+        {% else %}                                                                              # If there's room on X, purge along Y axis to the left of print area
+            
+            G92 E0                                                                              # Reset extruder
+            G0 F{travel_speed}                                                                  # Set travel speed
+            G90                                                                                 # Absolute positioning
+            G0 X{purge_x_origin} Y{purge_y_center}                                              # Move to purge position
+            G0 Z{purge_height}                                                                  # Move to purge Z height
+            M83                                                                                 # Relative extrusion mode
+            G1 E{tip_distance} F{purge_move_speed}                                              # Move filament tip
+            G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}             # Purge line
+            {RETRACT}                                                                           # Retract
+            G92 E0                                                                              # Reset extruder distance
+            M82                                                                                 # Absolute extrusion mode
+            G0 Z{purge_height * 2} F{travel_speed}                                              # Z hop
+
+        {% endif %}
+    
+    {% endif %}

cfgs/misc-macros.cfg

@@ -1,8 +1,14 @@
 [force_move]
 enable_force_move: True
 
-[temperature_sensor raspberry_pi]
-sensor_type: temperature_host
+# NOTE If you're using a Raspberry Pi, you can uncomment the next 2 lines, optionally.
+# [temperature_sensor raspberry_pi]
+# sensor_type: temperature_host
+
+# NOTE If you're using a an Orange Pi, you can uncomment the next 3 lines, optionally.
+# [temperature_sensor Orange_Pi]
+# sensor_type: temperature_host
+# sensor_path: /sys/class/thermal/thermal_zone0/temp
 
 [virtual_sdcard]
 path: /home/pi/printer_data/gcodes
@@ -20,13 +26,13 @@ gcode:
     SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
 
 [gcode_macro _globals]
-variable_filament_sensor_enabled: 1 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
+variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
 variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
-variable_pre_purge_prime_length: 1.25
+variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
+variable_kamp_enable: 1 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
+variable_pre_purge_prime_length: 1.40
 gcode:
-    SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
-    SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
-    SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
+    # Don't delete this section
 
 [gcode_macro CONDITIONAL_BEEP]
 gcode:
@@ -79,10 +85,7 @@ gcode:
     {% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
     ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
 
-    #   Get Boundaries
-    {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
-    {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
-    {% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
+    #   Misc variables
     {% set extrudeAmount = 26.6 %}
     {% set movementLength = 100.0 %}
     {% set movementSpeed = 15 * 60 %}
@@ -100,7 +103,7 @@ gcode:
     M83                                     ; Relative extrusion mode
     G1 E{PRE_PURGE_PRIME_LENGTH} F500       ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
     G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed}       ; intro line 1
-    #G1 E-.5 F2100                                                                       # Retract
+
     G92 E0.0                                ; reset extruder
     M82                                     ; Absolute extrusion mode
     G1 Z5.0                                 ; move nozzle to prevent scratch
@@ -116,41 +119,59 @@ gcode:
 
 [gcode_macro PRINT_START]
 gcode:
+    ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
     # Parameters
     {% set bedtemp = params.BED|int %}
     {% set hotendtemp = params.HOTEND|int %}
     {% set chambertemp = params.CHAMBER|default(0)|int %}
     
+    # Other variables
+    {% set bedtempSlicer = bedtemp %}
+    {% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
     {% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
     {% set maxVelocityAdjusted =  (0.90 * maxVelocity * 60)|int %}
+    {% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
 
     {% if printer.configfile.settings.safe_z_home %}
         {% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
         {% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
-    {% else %}
-        {% set startX = 0 %}
-        {% set startY = 0 %}
     {% endif %}
 
-    {% set bedtempAlmost =  (bedtemp - 2)|int %}
-    {% set hotendtempStepOne = 150|int %}
-    {% set hotendtempStepTwo = 170|int %}
+    {% set bedtempAlmost = ((bedtemp - 2, 0, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
+    {% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
+    {% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
 
-    BED_MESH_PROFILE LOAD=default                                                ; NOTE if not using a mesh, comment out this line
-    ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
+    # If bed-temp-almost is higher than bed-temp by a maximum of bed-temp-over
+    {% if bedtempAlmost > bedtemp %}
+        {% if (bedtempAlmost - bedtempOver) <= bedtemp %}
+            {% set bedtemp = bedtempAlmost %}
+        {% endif %}
+    {% endif %}
 
     G90                                                  ; absolute positioning
     M140 S{bedtempAlmost}                                ; set & don't wait for bed temp
     M104 S{hotendtempStepOne}                            ; set & don't wait for hotend temp
     G28 X Y
+    {% if printer.configfile.settings.safe_z_home %}
         G1 X{startX} Y{startY} F{maxVelocityAdjusted}
+    {% endif %}
 
     M190 S{bedtempAlmost}                                ; set & wait for bed temp
+    {% if kampEnabled == 0 %}
         M104 S{hotendtempStepTwo}                            ; set & don't wait for hotend temp
+    {% endif %}
     M190 S{bedtemp}                                      ; set & wait for bed temp
+    M140 S{bedtempSlicer}                                ; set & don't wait for bed temp ; set temp to sliced setting regardless
 
+    {% if kampEnabled == 0 %}
+        BED_MESH_PROFILE LOAD=default                        ; NOTE if not using a mesh, comment out this line
         M104 S{hotendtemp}                                   ; set & don't wait for hotend temp
         G28 Z                                                ; final z homing
+    {% else %}
+        G28 Z                                                ; final z homing
+        BED_MESH_CALIBRATE                                   ; KAMP mesh
+        M104 S{hotendtemp}                                   ; set & don't wait for hotend temp
+    {% endif %}
 
     G1 X0 Y0 F{maxVelocityAdjusted}
     M109 S{hotendtemp}                                   ; set & wait for hotend temp

misc/M503-output.yml

@@ -1,63 +1,48 @@
-Recv: echo:; Linear Units:
-Recv: echo:  G21 ; (mm)
-Recv: echo:; Temperature Units:
-Recv: echo:  M149 C ; Units in Celsius
-Recv: echo:; Filament settings (Disabled):
-Recv: echo:  M200 S0 D1.75
-Recv: echo:; Steps per unit:
-Recv: echo:  M92 X80.00 Y80.00 Z800.00 E691.50
-Recv: echo:; Max feedrates (units/s):
-Recv: echo:  M203 X200.00 Y200.00 Z12.00 E120.00
-Recv: echo:; Max Acceleration (units/s2):
-Recv: echo:  M201 X1000.00 Y1000.00 Z200.00 E5000.00
-Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
-Recv: echo:  M204 P1000.00 R1250.00 T1500.00
-Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
-Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.01
-Recv: echo:; Home offset:
-Recv: echo:  M206 X0.00 Y0.00 Z0.00
-Recv: echo:; Unified Bed Leveling:
-Recv: echo:  M420 S1 Z10.00 ; Leveling ON
-Recv: Unified Bed Leveling System v1.01 active
-Recv: echo:Active Mesh Slot 0
-Recv: echo:EEPROM can hold 2 meshes.
-Recv: echo:; X-Twist Correction:
-Recv:   M423 A0.00 I110.00
-Recv:   M423 X0 Z0.00
-Recv:   M423 X1 Z0.00
-Recv:   M423 X2 Z0.00
-Recv: echo:; Material heatup parameters:
-Recv: echo:  M145 S0 H200.00 B60.00 F0
-Recv: echo:  M145 S1 H240.00 B70.00 F0
-Recv: echo:  M145 S2 H205.00 B45.00 F0
-Recv: echo:  M145 S3 H260.00 B70.00 F0
-Recv: echo:; Hotend PID:
-Recv: echo:  M301 P23.48 I2.99 D46.09
-Recv: echo:; Bed PID:
-Recv: echo:  M304 P163.96 I28.03 D639.32
-Recv: echo:; User thermistors:
-Recv: echo:  M305 P0 R4700.0 T94162.0 B4160.0 C0.000000000 ; HOTEND 0
-Recv: echo:; Power-loss recovery:
-Recv: echo:  M413 S0 ; OFF
-Recv: echo:; Z-Probe Offset:
-Recv: echo:  M851 X28.00 Y-20.00 Z-2.02 ; (mm)
-Recv: echo:; Stepper driver current:
-Recv: echo:  M906 X860 Y900 Z1000
-Recv: echo:  M906 T0 E550
-Recv: echo:; Hybrid Threshold:
-Recv: echo:  M913 X183 Y183 Z41
-Recv: echo:  M913 T0 E60
-Recv: echo:; StallGuard threshold:
-Recv: echo:  M914 X65 Y68
-Recv: echo:; Driver stepping mode:
-Recv: echo:  M569 S1 X Y Z
-Recv: echo:  M569 S1 T0 E
-Recv: echo:; Input Shaping:
-Recv: echo:  M593 X F40.00 D0.15
-Recv: echo:  M593 Y F40.00 D0.15
-Recv: echo:; Linear Advance:
-Recv: echo:  M900 K0.05
-Recv: echo:; Filament load/unload:
-Recv: echo:  M603 L0.00 U50.00 ; (mm)
-Recv: echo:; Filament runout sensor:
-Recv: echo:  M412 S0 ; Sensor OFF
+echo:; Linear Units:
+echo:  G21 ; (mm)
+echo:; Temperature Units:
+echo:  M149 C ; Units in Celsius
+echo:; Filament settings (Disabled):
+echo:  M200 S0 D1.75
+echo:; Steps per unit:
+echo:  M92 X80.00 Y80.00 Z800.00 E691.50
+echo:; Max feedrates (units/s):
+echo:  M203 X500.00 Y500.00 Z10.00 E30.00
+echo:; Max Acceleration (units/s2):
+echo:  M201 X500.00 Y500.00 Z100.00 E5000.00
+echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
+echo:  M204 P500.00 R500.00 T1000.00
+echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>):
+echo:  M205 B20000.00 S0.00 T0.00 X8.00 Y8.00 Z0.40 E5.00
+echo:; Home offset:
+echo:  M206 X0.00 Y0.00 Z0.00
+echo:; Auto Bed Leveling:
+echo:  M420 S0 Z10.00 ; Leveling OFF
+echo:; Material heatup parameters:
+echo:  M145 S0 H185.00 B60.00 F255
+echo:  M145 S1 H240.00 B80.00 F255
+echo:; Hotend PID:
+echo:  M301 P15.95 I1.30 D48.96
+echo:; Bed PID:
+echo:echo:  M304 P110.38 I6.12 D497.30
+echo:; User thermistors:
+echo:  M305 P0 R4700.0 T94162.0 B4160.0 C0.000000000 ; HOTEND 0
+echo:; Power-loss recovery:
+echo:  M413 S1 ; ON
+echo:; Z-Probe Offset:
+echo:  M851 X25.00 Y-25.00 Z0.00 ; (mm)
+echo:; Stepper driver current:
+echo:  M906 X860 Y900 Z800
+echo:  M906 T0 E550
+echo:; Hybrid Threshold:
+echo:  M913 X183 Y183 Z41
+echo:  M913 T0 E60
+echo:; StallGuard threshold:
+echo:  M914 X68 Y70
+echo:; Driver stepping mode:
+echo:  M569 S1 X Y Z
+echo:  M569 S1 T0 E
+echo:; Linear Advance:
+echo:  M900 K0.04
+echo:; Filament load/unload:
+echo:  M603 L0.00 U50.00 ; (mm)

misc/SuperSlicer_config_bundle.ini

@@ -1,6 +1,6 @@
-# generated by SuperSlicer 2.4 on 2023-02-15 at 02:16:55 UTC
+# generated by SuperSlicer 2.4 on 2023-03-14 at 23:18:59 UTC
 
-[print:_Ellis_Decorative_45_Degree_11mm3-SOVOL]
+[print:_Ellis_Decorative_45_Degree_15mm3-SOVOL]
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -78,7 +78,7 @@ first_layer_acceleration_over_raft = 0
 first_layer_extrusion_spacing = 
 first_layer_extrusion_width = 125%
 first_layer_flow_ratio = 100%
-first_layer_height = 0.25
+first_layer_height = 0.26
 first_layer_infill_speed = 60
 first_layer_min_speed = 0
 first_layer_size_compensation = -0.1
@@ -132,7 +132,7 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 200
-max_volumetric_speed = 11
+max_volumetric_speed = 15
 milling_after_z = 200%
 milling_extra_size = 150%
 milling_post_process = 0
@@ -172,7 +172,7 @@ print_custom_variables = wall_thickness_lines = 0
 print_extrusion_multiplier = 100%
 print_retract_length = -1
 print_retract_lift = -1
-print_settings_id = Ellis - Decorative 45 Degree (11mm3/s)
+print_settings_id = Ellis - Decorative 45 Degree (15mm3/s)
 print_temperature = 0
 raft_contact_distance = 0.1
 raft_expansion = 1.5
@@ -267,7 +267,7 @@ wipe_tower_y = 140
 xy_inner_size_compensation = 0
 xy_size_compensation = 0
 
-[print:_Ellis_Decorative_Standard_11mm3-SOVOL]
+[print:_Ellis_Decorative_Standard_15mm3-SOVOL]
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -345,7 +345,7 @@ first_layer_acceleration_over_raft = 0
 first_layer_extrusion_spacing = 
 first_layer_extrusion_width = 125%
 first_layer_flow_ratio = 100%
-first_layer_height = 0.25
+first_layer_height = 0.26
 first_layer_infill_speed = 60
 first_layer_min_speed = 0
 first_layer_size_compensation = -0.1
@@ -399,7 +399,7 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 200
-max_volumetric_speed = 11
+max_volumetric_speed = 15
 milling_after_z = 200%
 milling_extra_size = 150%
 milling_post_process = 0
@@ -439,7 +439,7 @@ print_custom_variables = wall_thickness_lines = 0
 print_extrusion_multiplier = 100%
 print_retract_length = -1
 print_retract_lift = -1
-print_settings_id = Ellis - Decorative Standard (11mm3/s)
+print_settings_id = Ellis - Decorative Standard (15mm3/s)
 print_temperature = 0
 raft_contact_distance = 0.1
 raft_expansion = 1.5
@@ -534,7 +534,7 @@ wipe_tower_y = 140
 xy_inner_size_compensation = 0
 xy_size_compensation = 0
 
-[print:_Ellis_PIF_45_Degree_11mm3-SOVOL]
+[print:_Ellis_PIF_45_Degree_15mm3-SOVOL]
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -612,7 +612,7 @@ first_layer_acceleration_over_raft = 0
 first_layer_extrusion_spacing = 
 first_layer_extrusion_width = 125%
 first_layer_flow_ratio = 100%
-first_layer_height = 0.25
+first_layer_height = 0.26
 first_layer_infill_speed = 60
 first_layer_min_speed = 0
 first_layer_size_compensation = -0.1
@@ -666,7 +666,7 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 200
-max_volumetric_speed = 11
+max_volumetric_speed = 15
 milling_after_z = 200%
 milling_extra_size = 150%
 milling_post_process = 0
@@ -706,7 +706,7 @@ print_custom_variables = wall_thickness_lines = 0
 print_extrusion_multiplier = 100%
 print_retract_length = -1
 print_retract_lift = -1
-print_settings_id = Ellis - PIF 45 Degree (11mm3/s)
+print_settings_id = Ellis - PIF 45 Degree (15mm3/s)
 print_temperature = 0
 raft_contact_distance = 0.1
 raft_expansion = 1.5
@@ -801,7 +801,7 @@ wipe_tower_y = 140
 xy_inner_size_compensation = 0
 xy_size_compensation = 0
 
-[print:_Ellis_PIF_Standard_11mm3-SOVOL]
+[print:_Ellis_PIF_Standard_15mm3-SOVOL]
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -879,7 +879,7 @@ first_layer_acceleration_over_raft = 0
 first_layer_extrusion_spacing = 
 first_layer_extrusion_width = 125%
 first_layer_flow_ratio = 100%
-first_layer_height = 0.25
+first_layer_height = 0.26
 first_layer_infill_speed = 60
 first_layer_min_speed = 0
 first_layer_size_compensation = -0.1
@@ -933,7 +933,7 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 200
-max_volumetric_speed = 11
+max_volumetric_speed = 15
 milling_after_z = 200%
 milling_extra_size = 150%
 milling_post_process = 0
@@ -973,7 +973,7 @@ print_custom_variables = wall_thickness_lines = 0
 print_extrusion_multiplier = 100%
 print_retract_length = -1
 print_retract_lift = -1
-print_settings_id = Ellis - PIF Standard (11mm3/s)
+print_settings_id = Ellis - PIF Standard (15mm3/s)
 print_temperature = 0
 raft_contact_distance = 0.1
 raft_expansion = 1.5
@@ -1495,7 +1495,7 @@ full_fan_speed_layer = 4
 inherits = 
 max_fan_speed = 100
 max_speed_reduction = 90%
-min_fan_speed = 50
+min_fan_speed = 100
 min_print_speed = 15
 slowdown_below_layer_time = 15
 start_filament_gcode = ""
@@ -1591,7 +1591,7 @@ temperature = 250
 top_fan_speed = -1
 
 [filament:Eryone PETG - Blue]
-bed_temperature = 60
+bed_temperature = 70
 bridge_fan_speed = 100
 bridge_internal_fan_speed = -1
 chamber_temperature = 30
@@ -1602,15 +1602,15 @@ compatible_prints_condition =
 disable_fan_first_layers = 2
 end_filament_gcode = ""
 external_perimeter_fan_speed = -1
-extrusion_multiplier = 1
+extrusion_multiplier = 1.02
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #2400FF
+filament_colour = #0F0EF0
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cooling_zone_pause = 0
-filament_cost = 20
+filament_cost = 29.36
 filament_custom_variables = ""
 filament_density = 1.45
 filament_deretract_speed = nil
@@ -1623,7 +1623,7 @@ filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_overlap = 100%
-filament_max_speed = 120
+filament_max_speed = 0
 filament_max_volumetric_speed = 12
 filament_max_wipe_tower_speed = 0
 filament_melt_zone_pause = 0
@@ -1644,7 +1644,7 @@ filament_settings_id = ""
 filament_shrink = 100%
 filament_skinnydip_distance = 31
 filament_soluble = 0
-filament_spool_weight = 0
+filament_spool_weight = 1000
 filament_toolchange_delay = 0
 filament_toolchange_part_fan_speed = 50
 filament_toolchange_temp = 200
@@ -1663,13 +1663,13 @@ filament_wipe_inside_end = nil
 filament_wipe_inside_start = nil
 filament_wipe_only_crossing = nil
 filament_wipe_speed = nil
-first_layer_bed_temperature = 60
-first_layer_temperature = 250
+first_layer_bed_temperature = 70
+first_layer_temperature = 240
 full_fan_speed_layer = 4
 inherits = 
 max_fan_speed = 100
 max_speed_reduction = 90%
-min_fan_speed = 50
+min_fan_speed = 100
 min_print_speed = 15
 slowdown_below_layer_time = 15
 start_filament_gcode = ""
@@ -1751,17 +1751,17 @@ filament_wipe_inside_start = nil
 filament_wipe_only_crossing = nil
 filament_wipe_speed = nil
 first_layer_bed_temperature = 70
-first_layer_temperature = 245
+first_layer_temperature = 220
 full_fan_speed_layer = 4
 inherits = 
 max_fan_speed = 100
 max_speed_reduction = 90%
-min_fan_speed = 45
+min_fan_speed = 100
 min_print_speed = 15
 slowdown_below_layer_time = 15
 start_filament_gcode = ""
 support_material_interface_fan_speed = -1
-temperature = 235
+temperature = 220
 top_fan_speed = -1
 
 [filament:Eryone PETG - Galaxy Red]
@@ -1851,6 +1851,93 @@ support_material_interface_fan_speed = -1
 temperature = 235
 top_fan_speed = -1
 
+[filament:Eryone PLA - Matte Dual - Pink-Blue]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1.02
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #927BB6
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 0
+filament_cooling_zone_pause = 0
+filament_cost = 26.91
+filament_custom_variables = ""
+filament_density = 1.23
+filament_deretract_speed = 30
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ";Full spool weight: 1280g"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 30
+filament_seam_gap = nil
+filament_settings_id = "ABS - KVP"
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+support_material_interface_fan_speed = -1
+temperature = 210
+top_fan_speed = -1
+
 [filament:Nuolei TPU - Light Blue]
 bed_temperature = 70
 bridge_fan_speed = 80
@@ -2278,7 +2365,7 @@ full_fan_speed_layer = 4
 inherits = 
 max_fan_speed = 100
 max_speed_reduction = 90%
-min_fan_speed = 100
+min_fan_speed = 70
 min_print_speed = 10
 slowdown_below_layer_time = 15
 start_filament_gcode = "; Filament gcode\n"
@@ -2373,9 +2460,96 @@ support_material_interface_fan_speed = -1
 temperature = 210
 top_fan_speed = -1
 
+[filament:eSun PLA+ Silver]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #0E5FED
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 0
+filament_cooling_zone_pause = 0
+filament_cost = 30
+filament_custom_variables = ""
+filament_density = 1.23
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ";Full spool weight: 1280g"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = "ABS - KVP"
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+support_material_interface_fan_speed = -1
+temperature = 210
+top_fan_speed = -1
+
 [printer:Sovol Sv06]
-bed_custom_model = /home/bassam/3dprinter/voron01-related/Ellis-SuperSlicer-Profiles/misc/SV06BuildPlate.stl
-bed_custom_texture = /home/bassam/3dprinter/voron01-related/Ellis-SuperSlicer-Profiles/misc/Texture_SV06.svg
+bed_custom_model = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
+bed_custom_texture = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
 bed_shape = 0x0,223x0,223x223,0x223
 before_layer_gcode = 
 between_objects_gcode = 
@@ -2384,7 +2558,7 @@ cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 default_filament_profile = "Prusament PLA"
 default_print_profile = 0.15mm QUALITY @MK3
-deretract_speed = 60
+deretract_speed = 50
 end_gcode = PRINT_END
 extra_loading_move = -2
 extruder_colour = #FFE3CA
@@ -2452,7 +2626,7 @@ remaining_times_type = m73
 retract_before_travel = 2
 retract_before_wipe = 0%
 retract_layer_change = 1
-retract_length = 0.3
+retract_length = 0.4
 retract_length_toolchange = 10
 retract_lift = 0
 retract_lift_above = 0.2
@@ -2461,7 +2635,7 @@ retract_lift_first_layer = 0
 retract_lift_top = "All surfaces"
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 60
+retract_speed = 50
 seam_gap = 15%
 silent_mode = 0
 single_extruder_multi_material = 0
@@ -2499,8 +2673,8 @@ z_offset = 0
 z_step = 0.005
 
 [presets]
-print = _Ellis_PIF_45_Degree_11mm3-SOVOL
+print = _Ellis_PIF_Standard_15mm3-SOVOL
 sla_print = 
 sla_material = 
 printer = Sovol Sv06
-filament = eSun PLA+ Blue
+filament = D3d PETG - Red

osskc.cfg

@@ -0,0 +1,10 @@
+[include ./cfgs/misc-macros.cfg]
+[include ./cfgs/PARKING.cfg]
+[include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg]
+[include ./cfgs/CALIBRATION.cfg]
+[include ./cfgs/kamp/KAMP_Settings.cfg]
+
+# NOTE Uncomment the ONE of the following lines if you're using an adxl345
+# [include ./cfgs/adxl-rp2040.cfg]
+# [include ./cfgs/adxl-rpi-pico-2x.cfg]
+# [include ./cfgs/adxl-direct.cfg]

printer.cfg

@@ -4,24 +4,17 @@
 # 
 # See https://www.klipper3d.org/Config_Reference.html for configuration reference.
 
-[include ./cfgs/misc-macros.cfg]
-[include ./cfgs/TEST_SPEED.cfg]
-[include ./cfgs/PARKING.cfg]
-[include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg]
-
-# NOTE Uncomment the ONE of the following lines if you're using an adxl345
-# [include ./cfgs/adxl-rp2040.cfg]
-# [include ./cfgs/adxl-direct.cfg]
+[include ./osskc.cfg]
 
 [mcu]
-# NOTE Obtain definition by "ls -l /dev/serial/by-id/"
-serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+# NOTE Obtain definition by "ls -l /dev/serial/by-path/" or "ls -l /dev/serial/by-id/"
+serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2:1.0-port0
 restart_method: command
 
 [printer]
 kinematics: cartesian
-max_velocity: 275
-max_accel: 3500
+max_velocity: 200
+max_accel: 3000
 max_z_velocity: 15
 max_z_accel: 45
 square_corner_velocity: 8.0
@@ -44,7 +37,7 @@ homing_retract_dist: 0
 
 [tmc2209 stepper_x]
 uart_pin: PC1
-run_current: 0.900
+run_current: 0.860
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
@@ -66,7 +59,7 @@ homing_retract_dist: 0
 
 [tmc2209 stepper_y]
 uart_pin: PC0
-run_current: 1.000
+run_current: 0.900
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
@@ -81,7 +74,7 @@ enable_pin: !PC3
 microsteps: 128
 rotation_distance: 4
 endstop_pin: probe:z_virtual_endstop
-position_min: -3
+position_min: -4
 position_max: 258 # NOTE You can adjust this if you have more room
 homing_speed: 5
 
@@ -102,17 +95,20 @@ diag_pin: PA7
 step_pin: PB4
 dir_pin: !PB3
 enable_pin: !PC3
-microsteps: 256
+microsteps: 128
 rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html
 nozzle_diameter: 0.400
 filament_diameter: 1.750
 heater_pin: PA1
 sensor_type: EPCOS 100K B57560G104F
 sensor_pin: PC5
+control: pid
+pid_kd: 86.991
+pid_kp: 21.479
+pid_ki: 1.326
 min_temp: 0
 max_temp: 300
 max_extrude_only_distance: 150.0
-pressure_advance: 0.0465 # 0.044
 
 [tmc2209 extruder]
 uart_pin: PC14
@@ -130,6 +126,10 @@ uart_address: 3
 heater_pin: PA2
 sensor_type: EPCOS 100K B57560G104F
 sensor_pin: PC4
+control: pid
+pid_kp: 64.440
+pid_ki: 0.773
+pid_kd: 1343.571
 min_temp: 0
 max_temp: 110
 
@@ -141,7 +141,7 @@ max_temp: 110
 pin: PB1
 x_offset: 27
 y_offset: -20
-# z_offset: 0
+z_offset: 0
 samples: 3
 samples_result: median
 samples_tolerance: 0.01
@@ -182,34 +182,27 @@ sid_pin: PB15
 encoder_pins: ^PB14, ^PB10
 click_pin: ^!PB2
 
-[input_shaper]
-shaper_freq_x: 55.0 # 97.2 # 82.2 # 84.2; 4020
-shaper_type_x: mzv # 3hump_ei # 2hump_ei
-shaper_freq_y: 40.6 # 41.8; 4020
-shaper_type_y: mzv
-
 [bed_screws]
-screw1: 26.5, 31
 screw1_name: front left
-screw2: 196.75, 31
+screw1: 26.5, 31
 screw2_name: front right
-screw3: 196.75, 201
+screw2: 196.75, 31
 screw3_name: back right
-screw4: 26.5, 201
+screw3: 196.75, 201
 screw4_name: back left
+screw4: 26.5, 201
 
 [screws_tilt_adjust]
-screw1: 111.5, 116.5
 screw1_name: center
-screw2: 26.5, 31
+screw1: 84.50, 135
 screw2_name: front left
-screw3: 196.75, 31
+screw2: 0, 51
 screw3_name: front right
-screw4: 196.75, 201
+screw3: 169.75, 51
 screw4_name: back right
-screw5: 26.5, 201
+screw4: 169.75, 221
 screw5_name: back left
-speed: 50
+screw5: 0, 221
 horizontal_move_z: 10
 screw_thread: CCW-M4
 
@@ -230,116 +223,3 @@ runout_gcode:
     M117 Runout Detected
     { action_respond_info("Runout Detected") }
     CONDITIONAL_BEEP i=3 dur=300 freq=400
-
-#*# <---------------------- SAVE_CONFIG ---------------------->
-#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
-#*#
-#*# [extruder]
-#*# control = pid
-#*# pid_kp = 23.147
-#*# pid_ki = 1.559
-#*# pid_kd = 85.934
-#*#
-#*# [heater_bed]
-#*# control = pid
-#*# pid_kp = 68.957
-#*# pid_ki = 1.281
-#*# pid_kd = 928.332
-#*#
-#*# [probe]
-#*# z_offset = 1.610
-#*#
-#*# [bed_mesh newbed]
-#*# version = 1
-#*# points =
-#*# 	-0.240625, -0.114375, -0.018750, 0.004375, 0.092500
-#*# 	-0.280625, -0.120000, -0.005000, 0.025000, -0.011250
-#*# 	-0.330625, -0.151875, -0.035000, -0.006875, 0.011250
-#*# 	-0.350625, -0.145000, -0.030000, 0.001875, 0.073125
-#*# 	-0.353125, -0.110000, 0.031250, 0.056250, 0.006250
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*#
-#*# [bed_mesh oldbed]
-#*# version = 1
-#*# points =
-#*# 	-0.158750, -0.064375, 0.022500, 0.069375, 0.076875
-#*# 	-0.214375, -0.114375, -0.010625, 0.030625, 0.016875
-#*# 	-0.254375, -0.135625, -0.041875, -0.006250, -0.025000
-#*# 	-0.255000, -0.143750, -0.062500, -0.041250, -0.059375
-#*# 	-0.193125, -0.098750, -0.033750, -0.019375, -0.035625
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*#
-#*# [bed_mesh default-v1]
-#*# version = 1
-#*# points =
-#*# 	-0.181250, -0.127500, -0.082500, -0.086875, -0.124375
-#*# 	-0.182500, -0.123750, -0.063750, -0.069375, -0.132500
-#*# 	-0.190000, -0.106250, -0.056250, -0.067500, -0.128125
-#*# 	-0.185625, -0.100000, -0.042500, -0.063750, -0.128125
-#*# 	-0.133125, -0.045625, 0.000000, -0.019375, -0.079375
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*#
-#*# [bed_mesh personalPreEdit]
-#*# version = 1
-#*# points =
-#*# 	-0.147188, -0.085313, -0.033906, -0.025469, -0.035000
-#*# 	-0.163594, -0.095313, -0.027344, -0.014219, -0.057813
-#*# 	-0.187500, -0.087188, -0.030938, -0.019375, -0.063594
-#*# 	-0.179844, -0.080625, -0.012813, -0.013750, -0.061406
-#*# 	-0.126094, -0.026250, 0.033594, 0.030781, -0.010000
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*#
-#*# [bed_mesh default]
-#*# version = 1
-#*# points =
-#*# 	-0.150000, -0.110000, -0.110000, -0.130000, -0.130000
-#*# 	-0.165000, -0.130000, -0.130000, -0.130000, -0.130000
-#*# 	-0.165000, -0.112266, -0.110000, -0.130000, -0.130000
-#*# 	-0.160000, -0.105430, -0.110000, -0.130000, -0.130000
-#*# 	-0.120000, -0.071211, -0.091407, -0.110000, -0.110000
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0