PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

More changes pulled from personal.

Browse Source
This commit is contained in:
Bassam Husain
2023-03-14 18:55:07 -04:00
parent c967be1023
commit 9239a54e8b
1 changed files with 15 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
cfgs/misc-macros.cfg
View File

@@ -14,6 +14,11 @@ path: /home/pi/printer_data/gcodes
[pause_resume]
[display_status]
# [delayed_gcode DISABLEFILAMENTSENSOR]
# initial_duration: 1
# gcode:
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
[gcode_macro _globals]
variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
@@ -74,7 +79,7 @@ gcode:
# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
# ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
G0 Y0 X0 F4000 ; go to tongue of print bed
G1 Z0.4 F500.0 ; move bed to nozzle
G92 E0.0 ; reset extruder
@@ -93,12 +98,14 @@ gcode:
BASE_CANCEL_PRINT
[gcode_macro PRINT_START]
gcode:
gcode:
# Parameters
{% set bedtemp = params.BED|int %}
{% set hotendtemp = params.HOTEND|int %}
{% set chambertemp = params.CHAMBER|default(0)|int %}
# ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
G28 X Y
# <insert your routines here>
M140 S{bedtemp} ; set & don't wait for bed temp
@@ -115,7 +122,8 @@ gcode:
[gcode_macro PRINT_END]
gcode:
BEEP I=2 DUR=30 FREQ=8500 ; NOTE Comment out this line to stop the beeps at the end of a print
# ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500 ; NOTE Comment out this line to stop the beeps at the end of a print
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
@@ -182,7 +190,8 @@ gcode:
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z} ; set z hop variable for reference in resume macro
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target} ; set hotend temp variable for reference in resume macro
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0 ; disable filament sensor
# ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
BASE_PAUSE ; pause print
{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %} ; check that zhop doesn't exceed z max
@@ -208,8 +217,8 @@ gcode:
{% set e = params.E|default(2.5)|int %} ; hotend prime amount (in mm)
{% if printer['pause_resume'].is_paused|int == 1 %}
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1 ; enable filament sensor
#INITIAL_RGB ; reset LCD color
# ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
{% if etemp > 0 %}
M109 S{etemp|int} ; wait for hotend to heat back up