PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated readme.

Browse Source
This commit is contained in:
Bassam Husain
2023-04-06 06:44:26 -04:00
parent 4b90c7abc5
commit d0b426d5b0
1 changed files with 2 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -103,6 +103,8 @@ You can choose *either* of the 2 following methods.
💡 I recommend no filament be loaded for any of these steps.
💡 Find explanations for gcode commands at [https://marlinfw.org/](https://marlinfw.org/) and [klipper.org](https://www.klipper3d.org/G-Codes.html).
1. `G28`
1. Check to see if `X` and `Y` max positions (`G90`, `G1 X223 F3000`, `G1 Y223 F3000`) can be reached, and adjust `position_max`, if necessary. You can probably go all the way up to `225` for `X` and `Y` both, however, I would not recommend it.
2. Do a `G34`; mechanical gantry calibration. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up agaisnt the `stoppers` at the top. You will hear a succession of beeps.