PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Print_start adjusted: prints should now start even if bed temp is higher than what was set in slicer; does set sliced temp at the end though.

Browse Source
This commit is contained in:
Bassam Husain
2023-05-10 01:11:58 -04:00
parent 05dba3939e
commit 5242dc7276
1 changed files with 7 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
cfgs/misc-macros.cfg
View File

@@ -124,6 +124,7 @@ gcode:
gcode:
# Parameters
{% set bedtemp = params.BED|int %}
{% set bedtempSlicer = bedtemp %}
{% set hotendtemp = params.HOTEND|int %}
{% set chambertemp = params.CHAMBER|default(0)|int %}
@@ -135,10 +136,14 @@ gcode:
{% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
{% endif %}
{% set bedtempAlmost = ((bedtemp - 2, printer.heater_bed.temperature|int)|max, bedtemp)|min %}
{% set bedtempAlmost = ((bedtemp - 2, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
{% if bedtempAlmost > bedtemp %}
{% set bedtemp = bedtempAlmost %}
{% endif %}
BED_MESH_PROFILE LOAD=default ; NOTE if not using a mesh, comment out this line
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
@@ -153,6 +158,7 @@ gcode:
M190 S{bedtempAlmost} ; set & wait for bed temp
M104 S{hotendtempStepTwo} ; set & don't wait for hotend temp
M190 S{bedtemp} ; set & wait for bed temp
M140 S{bedtempSlicer} ; set & don't wait for bed temp ; set temp to sliced setting regardless
M104 S{hotendtemp} ; set & don't wait for hotend temp
G28 Z ; final z homing