Merge branch 'kamp' into develop. Moved imports into osskc.cfg.

Prepare flash section

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,34 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: "[BUG]"
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**What kind of device are you using to host Klipper?**
+ - OS: [e.g. old laptop, PC, Raspberry Pi]
+ - Version: []
+
+**How did you install Klipper?**
+ - Manual install, KIAUH, MainsailOS, FluiddPi, etc.
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.vscode/settings.json

@@ -4,5 +4,33 @@
 	"editor.detectIndentation": false,
 	"git.mergeEditor": false,
 	"spellright.language": ["en-GB-10-1."],
-	"spellright.documentTypes": ["markdown", "plaintext"]
+	"spellright.documentTypes": ["markdown", "plaintext"],
+	"cSpell.words": [
+        "ADXL",
+        "blanchas",
+        "cfgs",
+        "Fluidd",
+        "Fluiddpi",
+        "gcode",
+        "githubstar",
+        "hotend",
+        "KIAUH",
+        "Klipper",
+        "Klipperized",
+        "lrwxrwxrwx",
+        "moonraker",
+        "octahedroflake",
+        "PARKBED",
+        "PARKCENTER",
+        "PARKFRONT",
+        "PARKFRONTLOW",
+        "PARKREAR",
+        "pico",
+        "Prusa",
+        "runout",
+        "Sovol"
+    ],
+	"[markdown]": {
+		"editor.formatOnSave": false
+	}
 }

CODE_OF_CONDUCT.md

@@ -0,0 +1,128 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, religion, or sexual identity
+and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the
+  overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+bassamanator.2cj4t@simplelogin.com.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series
+of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or
+permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior,  harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within
+the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at
+https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at
+https://www.contributor-covenant.org/translations.

CONTRIBUTING.md

@@ -0,0 +1,8 @@
+# Contribution Guidelines
+
+When contributing, please ...
+- provide a clear and concise explanation of your pull request.
+- try to make small changes, ie, make many small pull requests as opposed to a single large pull request. This allows me to check your work more quickly, thus merge more quickly.
+- try to follow the patterns I've already established.
+
+Thank you.

README.md

@@ -1,15 +1,40 @@
-# 🚨 *One-Stop-Shop* Sovol SV06 Klipper Configuration
+# 🚨 _One-Stop-Shop_ Klipper Configuration
 
-This repository contains the Klipper configuration and firmware for the **Sovol SV06** 3D printer with completely *stock hardware*.
+This branch contains the Klipper configuration and firmware for the **Sovol SV06** 3D printer.
 
-If you wanted to use the One-Stop-Shop Klipper Configuration for a *different printer*, please switch to the [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer) branch.
+| Printer                     | Branch                                                                                    |
+| --------------------------- | ----------------------------------------------------------------------------------------- |
+| Sovol SV06                  | ✨**You are here**✨                                                                      |
+| Sovol SV06 Skr-Mini-E3-V3.0 | [skr-mini-e3-v3](https://github.com/bassamanator/Sovol-SV06-firmware/tree/skr-mini-e3-v3) |
+| Sovol SV06 Plus             | [sv06-plus](https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus)           |
+| All other printers          | [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer)       |
 
 I am creating these files for my personal use and cannot be held responsible for what it might do to your printer. Use at your own risk.
 
-# Highlights
+## Outline
 
-- 💥 This Klipper configuration is an *endpoint*, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥
-- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> Filament runout sensor usage implemented. <img src="./images/party_blob.gif" width="20" alt=''/> 
+- [Features](#features)
+- [Stay Up-to-Date](#stay-up-to-date)
+- [Preface](#preface)
+- [Before You Begin](#before-you-begin)
+- [Klipper Installation](#klipper-installation)
+  - [Flash Firmware](#flash-firmware)
+  - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
+- [Initial Steps](#initial-steps)
+  1. [Adjust Configuration with MCU Path](#adjust-configuration-with-mcu-path)
+  2. [Configure Your Printer](#configure-your-printer)
+- [Adjust Your Slicer](#adjust-your-slicer)
+- [Directory Structure](#directory-structure)
+- [Support Me](#support-me)
+- [FAQ](#faq)
+- [Useful Resources](#useful-resources)
+- [Sovol Official Links](#sovol-official-links)
+- [Sources](#sources)
+
+## Features
+
+- 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥
+- <img src="./images/party_blob.gif" width="20" alt=''/> Filament runout sensor usage implemented. <img src="./images/party_blob.gif" width="20" alt=''/>
 - Minimum configuration settings for Mainsail/Fluiddpi to work.
 - SuperSlicer config bundle that contains the printer configuration, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)). Find the differences between the different print setting profiles [here](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles/tree/master/SuperSlicer). But basically, the 45 degree profile places the seam at the back.
 - Bed model and texture to use in SuperSlicer/PrusaSlicer.
@@ -20,89 +45,102 @@ I am creating these files for my personal use and cannot be held responsible for
   - Load/unload filament macros.
   - Purge line macro.
 
-## To do:
-
-- [x] Replace M109/M190 with `TEMPERATURE_WAIT`.
-- [ ] ~~Get the Ellis `TEST_SPEED` macro working.~~ Does not seem safely doable on this printer.
-- [x] Add information about directory structure.
-- [x] Create FAQ section.
-- [x] Get filament sensor working with hotend PCB.
-- [x] Finalize filament sensor config and merge into `master`.
-- [ ] Create topic in Discussion section detailing how users should keep this repository in sync with their own Klipper config using `git`.
-- [ ] Explain `PAUSE`/`RESUME` extruder behaviour.
-- [ ] Integrate KAMP (Klipper Adaptive Meshing and Purging).
-- [x] Add `BEEP` when filament needs changing/`M600`.
-
 ## Stay Up-to-Date
 
-I work on this repository all the time and a lot of new features are coming. Watch releases of this repository to be notified for future updates:
+Watch for releases and updates.
 
 <img src="./images/githubstar.gif" width="500" alt='Raspberry Pi'/>
 
-# Installation Steps
+## Preface
+
+Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience.
 
 ## Before You Begin
 
-- Know what you're getting into by reading this documentation *fully!*
-- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via USB.
+- Read this documentation _fully!_
+- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned.
+- Follow the steps in order.
+- If an error was reported at a step, do no proceed to the next step.
+- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
 - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
-- Klipper *must* be installed on the host Raspberry Pi for everything to work. Easiest is to use a [FluiddPi](https://docs.fluidd.xyz/installation/fluiddpi#download) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image.
-- It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will not work for you.
+- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
+- Robert Redford's performance in _Spy Game (2001)_ was superb!
+- It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you.
 - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
-- If you see any errors, or encounter any issues, please create an [Issue](https://github.com/bassamanator/Sovol-SV06-firmware/issues/new), or a [Pull request](https://github.com/bassamanator/Sovol-SV06-firmware/pulls).
 - I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration.
 
-## Flash Firmware
+## Klipper Installation
 
-💡 *If you have already flashed klipper onto your motherboard in the past, you can skip this step.*
+### Flash Firmware
 
-💡 For the sake of simplicity, I will refer to the klipper firmware file as `klipper.bin` even though the actual filename is something along the lines of `klipper-v0.11.0-148-g52f4e20c.bin`.
+💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._
 
-💡 The firmware file is located in the `misc` folder.
+Please note:
 
-### Prepare the microSD Card for Flashing
+- For the sake of simplicity, I will refer to the klipper firmware file as `klipper.bin` even though the actual filename is something along the lines of `klipper-v0.11.0-148-g52f4e20c.bin`.
+- The firmware file is located in the `misc` folder.
+- Flashing will only work if current firmware filename is _different from previous flashing procedure_. The `.bin` is also important.
+- Many users have reported having issues flashing Klipper using the Sovol microSD card.
 
-- Size: `8GB`. According to Sovol, the largest size that you can use is `16GB`.
+#### 1. Prepare the microSD Card for Flashing with These Parameters
+
+- Size: `16GB` maximum.
 - File system: `FAT32`.
-- Must not contain any files *except* the firmware file.
+- Allocation unit size: `4096 bytes`.
+- Must not contain any files _except_ the firmware file.
 
-### Flashing Procedure
+#### 2. Flashing Procedure
 
 1. Disconnect any USB cables that might be connected to the motherboard.
 2. Copy `klipper.bin` to the microSD card.
 3. Make sure the printer is off.
 4. Insert the microSD card into printer.
-4. Turn on the printer and wait a minute (usually takes 10 seconds).
-5. Turn off the printer and remove the microSD.
+5. Turn on the printer and wait a minute (usually takes 10 seconds).
+6. Turn off the printer and remove the microSD.
 
 You may find this [video](https://youtu.be/p6l253OJa34) useful.
 
-⚠️ **Caveat**: Flashing will only work if current firmware filename is *different from previous flashing procedure*. The `.bin` is also important.
+### Download OSS Klipper Configuration
 
-## Download Klipper Configuration
+You can choose _either_ of the 2 following methods.
 
-You can choose *either* of the 2 following methods.
-
-### Clone the Repository
+#### Method 1: Clone the Repository
 
 1. `cd ~/printer_data/config`
-2. Empty entire `~/printer_data/config` folder. Unfortunately, for safety reasons I will not post this command here. However, in linux, you can delete files via `rm filename`.
-3. `git clone -b master --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .`
+2. Empty entire `~/printer_data/config` folder.
+   - In linux, you can delete files via `rm fileName` and directories via `rmdir directoryName`.
+3. `git clone -b master --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .` ⚠️ Don't miss the period!
 
-### Download the ZIP
+#### Method 2: Download the ZIP
 
 1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/master.zip) the `ZIP` file containing the Klipper configuration.
-2. The parent folder in the `ZIP` is `Sovol-SV06-firmware-master`. This is relevant in the next step.
-3. Extract **only** the *contents* of the parent folder into `~/printer_data/config`.
+2. See `Step 2` in `Method 1`.
+3. The parent folder in the `ZIP` is `Sovol-SV06-firmware-master`. This is relevant in the next step.
+4. Extract **only** the _contents_ of the parent folder into `~/printer_data/config`.
 
 ## Initial Steps
 
-### Step 1
+### Adjust Configuration with MCU Path
 
-1. Find what port the `mcu` (SV06 motherboard) is connected to via `ls -l /dev/serial/by-id/`.
+1. Find what port the `mcu` (printer motherboard) is connected to via `ls -l /dev/serial/by-id/` or `ls -l /dev/serial/by-path/`.
+   1. The output will be something along the lines of
+      `lrwxrwxrwx 13 root root  22 Apr 11:10  usb-1a86_USB2.0-Serial-if00-port0 -> ../../ttyUSB0`.
+   2. `usb-1a86_USB2.0-Serial-if00-port0` is the relevant part.
+   3. Therefore, the full path to your `mcu` is either `/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0` or `/dev/serial/by-path/usb-1a86_USB2.0-Serial-if00-port0`, depending on the command you used to find the `mcu`.
 2. Adjust the `[mcu]` section in `printer.cfg` accordingly.
+   This is just an _example_ `mcu` section:
 
-### Step 2
+   ```
+   [mcu]
+   serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+   restart_method: command
+   ```
+
+3. Do a `FIRMWARE_RESTART`.
+
+If you've done everything correctly, you should see no errors or warnings in your Mainsail/Fluidd dashboard.
+
+### Configure Your Printer
 
 ❗☠️ **Your finger should be on the power switch for most of these steps** ☠️❗
 
@@ -110,70 +148,96 @@ You can choose *either* of the 2 following methods.
 
 💡 I recommend no filament be loaded for any of these steps.
 
-1. Do a `G28`; home all.
-   1. Check to see if `X` and `Y` max positions (`G1 X223 F3000`, `G1 Y223 F3000`) can be reached, and adjust `position_max`, if necessary. You can probably go all the way up to `225` for `X` and `Y` both, however, I would not recommend it.
-2. Do a `G34`; mechanical gantry calibration. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up agaisnt the `stoppers` at the top. You will hear a succession of beeps.
-   1. Figure out your `Z` `position_max` by baby stepping your way up to the beam. The range is 250 to 261 from what I've seen, could be even higher for you. Adjust `position_max`, if necessary. I can go all the way to 258 over and over again, however, I would not print anything higher than 255 probably.
-3. Pid tune the bed, but first move the printhead to the center. Ideally, all Pid tuning should occur at the temperatures that you print most at.
+💡 Find explanations for gcode commands at [https://marlinfw.org/](https://marlinfw.org/) and [https://www.klipper3d.org/](https://www.klipper3d.org/G-Codes.html).
+
+You will be pasting/typing these commands into the Mainsail/Fluidd console.
+
+1. Check to see if `X` and `Y` max positions can be reached, and adjust `position_max`, if necessary. You might be able to go further, which is great, but I recommend leaving a 2mm gap for safety.
    1. `G28`
-   2. `G1 X111 Y111 Z40 F6000`
-   3. `PID_CALIBRATE HEATER=heater_bed TARGET=70`
-   4. `SAVE_CONFIG` (once completed)
-4. Pid tune the extruder while part cooling fan runs at 25%.
-   1. `G28`
-   2. `G1 X111 Y111 Z10 F6000`
-   3. `M106 S64`
-   4. `PID_CALIBRATE HEATER=extruder TARGET=245`
-   5. `SAVE_CONFIG` (once completed)
-5. Adjust `z_offset`. Make sure your nozzle if very clean. Paper test [reference](https://www.klipper3d.org/Bed_Level.html?h=probe_calibrate#the-paper-test).
-   1. `SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60`
-   2. `SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180`
-   3. Proceed to next steps after both temperatures have been reached.
-   4. `G28`
-   5. `PROBE_CALIBRATE`
-   6. `SAVE_CONFIG` (once completed)
+   2. `G90`
+   3. `G1 X223 F3000`
+   4. `G1 Y223 F3000`
+2. Do a mechanical gantry calibration; `G34`. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. You will hear a succession of beeps.
+   1. Figure out your `Z` `position_max` by baby stepping your way up to the beam, and adjust `position_max`, if necessary.
+3. PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at.
+   1. `PID_TEST_BED TEMP=70`
+   2. `SAVE_CONFIG` (once completed)
+4. PID tune the extruder while part cooling fan runs at 25%.
+   1. `PID_TEST_HOTEND TEMP=245`
+   2. `SAVE_CONFIG` (once completed)
+5. Adjust `z_offset`. Make sure your nozzle if very clean. Do the [Paper test](https://www.klipper3d.org/Bed_Level.html?h=probe_calibrate#the-paper-test).
+   1. `DO_PROBE_CALIBRATE`
+   2. Follow `z_offset` setup in Mainsail/Fluidd.
+   3. `SAVE_CONFIG` (once completed)
 6. Create a bed mesh.
-   1. `SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60`
-   2. `SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180`
-   3. Proceed to next steps after both temperatures have been reached.
-   4. `G28`
-   5. `BED_MESH_CALIBRATE`
-   6. `SAVE_CONFIG` (once completed)
+   1. `DO_CREATE_MESH`
+   2. `SAVE_CONFIG` (once completed)
+
+If you've made it here, then your printer has been Klipperized, and is ready to print!
+
+But first, adjust your slicer.
+
+## Adjust Your Slicer
+
+You need to adjust the start and end gcode in your slicer. The relevant macros are `PRINT_START` and `PRINT_END`. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code).
+
+If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`. Here's an example:
+
+```
+PRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]
+PURGE_LINE
+```
 
 ## Directory Structure
 
-This repository contains many files and folders. Some are *necessary* for this Klipper configuration to work, others are not.
+This repository contains many files and folders. Some are _necessary_ for this Klipper configuration to work, others are not.
+
 - **Necessary** items are marked with a ✅.
-- Items that can *optionally* be deleted are marked with a ❌.
+- Items that can _optionally_ be deleted are marked with a ❌.
 
 ```
 ├── cfgs ✅
-│   ├── adxl-direct.cfg
-│   ├── adxl-rp2040.cfg
-│   ├── beeper.cfg
-│   ├── misc-macros.cfg
-│   ├── MECHANICAL_GANTRY_CALIBRATION.cfg
-│   ├── PARKING.cfg
-│   └── TEST_SPEED.cfg [☠️Not ready for use☠️]
+│   ├── adxl-direct.cfg
+│   ├── adxl-rp2040.cfg
+│   ├── adxl-rpi-pico-2x.cfg
+│   ├── MECHANICAL_GANTRY_CALIBRATION.cfg
+│   ├── misc-macros.cfg
+│   ├── PARKING.cfg
+│   └── TEST_SPEED.cfg
+├── CODE_OF_CONDUCT.md ❌
+├── CONTRIBUTING.md ❌
+├── .github ❌
+│   ├── FUNDING.yml
+│   └── ISSUE_TEMPLATE
+│       ├── bug_report.md
+│       └── feature_request.md
+├── .gitignore ❌
 ├── images ❌
-│   └── githubstar.gif
+│   ├── cup-border.png
+│   ├── githubstar.gif
+│   ├── heart.gif
+│   ├── logo_white_stroke.png
+│   └── party_blob.gif
 ├── misc ❌
-│   ├── cup-border.png
-│   ├── klipper.bin
-│   ├── logo_white_stroke.png
-│   ├── M503-output.yml
-│   ├── SuperSlicer_config_bundle.ini
-│   ├── sv06-buildPlate.png
-│   ├── SV06-buildPlate.stl
-│   └── SV06-texture.svg
+│   ├── klipper-v0.11.0-148-g52f4e20c.bin
+│   ├── M503-output.yml
+│   ├── marlin-SV06V2.0.0A_2.24.bin
+│   ├── SuperSlicer_config_bundle.ini
+│   ├── sv06-buildPlate.png
+│   ├── SV06-buildPlate.stl
+│   └── SV06-texture.svg
 ├── moonraker.conf ✅
 ├── printer.cfg ✅
-└── README.md ❌
+├── README.md ❌
+└── .vscode ❌
+    └── settings.json
 ```
 
-## <img src="./misc/cup-border.png" width="30" alt='Ko-fi'/> Support Me <img src="./misc/cup-border.png" width="30" alt='Ko-fi'/>
+## Support Me
 
-<img src="./images/heart.gif" width="17" alt=''/> If you found my work useful, please consider buying me a [<img src="./misc/logo_white_stroke.png" height="20" alt='Ko-fi'/>](https://ko-fi.com/bassamanator).
+Please ⭐ star ⭐ this repository!
+
+If you found my work useful, please consider buying me a [<img src="./images/logo_white_stroke.png" height="20" alt='Ko-fi'/>](https://ko-fi.com/bassamanator).
 
 ## FAQ
 
@@ -188,6 +252,7 @@ Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware
 ##### When does beeping occur?
 
 The printer will beep upon:
+
 - Filament runout.
 - Filament change/`M600`.
 - Upon `PRINT_END`.
@@ -195,43 +260,74 @@ The printer will beep upon:
 
 ##### How do I disable beeping?
 
-Make the following changes according to your needs. All beeping will be disabled *except* during gantry calibration.
+Make the following changes according to your needs. All beeping will be disabled _except_ during gantry calibration.
 
-| File | `cfgs/misc-macros.cfg` |
-| - | - |
-| Section | `[gcode_macro _globals]` |
-| Variable | `variable_beeping_enabled` |
-| Disable beeping | `0` |
-| Enable beeping | `1` |
+| File            | `cfgs/misc-macros.cfg`     |
+| --------------- | -------------------------- |
+| Section         | `[gcode_macro _globals]`   |
+| Variable        | `variable_beeping_enabled` |
+| Disable beeping | `0`                        |
+| Enable beeping  | `1`                        |
 
 ##### I want to use a filament sensor. How do I set it up?
 
- You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor).
+You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor).
+
 ##### I have a simple filament sensor connected. How do I enable/disable it?
 
 Make the following changes according to your needs.
 
-| File | `cfgs/misc-macros.cfg` |
-| - | - |
-| Section | `[gcode_macro _globals]` |
-| Variable | `variable_filament_sensor_enabled` |
-| Disable sensor | `0` |
-| Enable sensor | `1` |
+| File           | `cfgs/misc-macros.cfg`             |
+| -------------- | ---------------------------------- |
+| Section        | `[gcode_macro _globals]`           |
+| Variable       | `variable_filament_sensor_enabled` |
+| Disable sensor | `0`                                |
+| Enable sensor  | `1`                                |
 
 ##### My filament runout sensor works, but I just started a print without any filament loaded. What gives?
 
 A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps.
 
+##### What happens when I put in `M600`/colour change at a certain layer?
+
+1. The printer will beep 3 times (not annoyingly).
+2. Printing will stop.
+3. The printhead will park itself front center.
+4. The hotend will turn off, but the bed will remain hot.
+
+##### What happens when I pause a print?
+
+Same behaviour as `M600`/colour change _except_ there won't be any beeping.
+
+##### What happens when filament runs out?
+
+_If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying.
+
+##### How do I resume a print after a colour change or filament runout?
+
+⚠️ _Do not disable the stepper motors during this process!_
+
+The printhead is now parked front center waiting for you to insert filament. You will:
+
+1. Heat up the hotend to the desired temperature.
+   - Use your Klipper dashboard.
+2. Purge (push) some filament through the nozzle.
+   - Use your Klipper dashboard, and extrude maybe 50mm (for a colour change you probably want to extrude more).
+   - OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_.
+3. Hit resume in your Klipper dashboard.
+
 ## Useful Resources
 
 - [Everything Sovol SV06](https://github.com/bassamanator/everything-sovol-sv06)
 - [RP2040-Zero ADXL345 Connection Klipper](https://github.com/bassamanator/rp2040-zero-adxl345-klipper)
-- ⭐⭐⭐ [Ellis' Print Tuning Guide](https://ellis3dp.com/Print-Tuning-Guide)
+- ⭐⭐⭐⭐⭐ [Ellis' Print Tuning Guide](https://ellis3dp.com/Print-Tuning-Guide)
+- [Simplify3D Print Quality Troubleshooting Guide](https://www.simplify3d.com/resources/print-quality-troubleshooting/)
 
-## Links
+## Sovol Official Links
 
-- [SV06 Official Marlin Source Code](https://github.com/Sovol3d/Sv06-Source-Code)
-- [SV06 Official Models](https://github.com/Sovol3d/SV06-Fully-Open-Source)
+- [SV06 Marlin Source Code](https://github.com/Sovol3d/Sv06-Source-Code)
+- [SV06 Models](https://github.com/Sovol3d/SV06-Fully-Open-Source)
+- [SV06 Plus Marlin Source Code and Models](https://github.com/Sovol3d/SV06-PLUS)
 
 ## Sources
 
@@ -239,7 +335,7 @@ A simple runout sensor can only detect a change in state. So, if you start a pri
 - https://ellis3dp.com/Print-Tuning-Guide
 - https://github.com/strayr/strayr-k-macros
 - https://docs.vorondesign.com/build/software/miniE3_v20_klipper.html
-- ⭐ https://github.com/spinixguy/Sovol-SV06-firmware
+- https://github.com/spinixguy/Sovol-SV06-firmware
 - https://www.printables.com/model/378915-sovol-sv06-buildplate-texture-and-model-for-prusas
 - https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles
 

cfgs/CALIBRATION.cfg

@@ -0,0 +1,49 @@
+[gcode_macro PID_TEST_BED]
+gcode:
+    # Parameters
+    {% set TARGETTEMP = params.TEMP|default(70)|int %}
+    
+    {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
+    {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
+    G28
+    G90
+    G1 X{max_x/2} Y{max_y/2} Z40 F6000
+    PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}
+
+[gcode_macro PID_TEST_HOTEND]
+gcode:
+    # Parameters
+    {% set TARGETTEMP = params.TEMP|default(245)|int %}
+    
+    {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
+    {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
+    G28
+    G90
+    G1 X{max_x/2} Y{max_y/2} Z10 F6000
+    M106 S64
+    PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}
+
+# TODO test this
+[gcode_macro PID_TEST_ALL]
+gcode:
+    PID_TEST_BED
+    PID_TEST_HOTEND
+    SAVE_CONFIG
+
+[gcode_macro DO_PROBE_CALIBRATE]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
+    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
+    TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
+    G28
+    PROBE_CALIBRATE
+
+[gcode_macro DO_CREATE_MESH]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
+    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
+    TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
+    G28
+    _BED_MESH_CALIBRATE

cfgs/adxl-rpi-pico-2x.cfg

@@ -0,0 +1,43 @@
+#####################################################################
+#   Config that supports a print head and a bed sensor at the same time
+#   This requires a Raspberry Pi Pico.
+#   Instructions: https://klipper.discourse.group/t/raspberry-pi-pico-adxl345-portable-resonance-measurement/1757/9
+#   TLDR Instructions: The two sensors should use the spi0a (GPIO 0-3) and spi1a (GPIO 9-12) buses, respectively.
+#
+#   Recommended mounts: 
+#   https://www.printables.com/model/385334-sovol-sv06-adxl345-mount-printhead-and-bed
+#
+#   ADXL345 related Settings 
+#   https://www.klipper3d.org/Measuring_Resonances.html#adxl345
+#####################################################################
+
+[mcu RP2040]
+baud: 115200
+restart_method: command
+# Obtain definition by "ls -l /dev/serial/by-id/"
+serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
+
+[adxl345 head]
+cs_pin: RP2040:gpio1
+spi_bus: spi0a
+# update axes_map if your sensor is oriented differently. Note the print on your sensor.
+# -y, -z, x means that
+#  - the x axis of your printer corresponds to the sensor's negative y axis
+#  - the y axis of your printer corresponds to the sensor's negative z axis
+#  - the z axis of your printer corresponds to the sensor's x axis
+axes_map: -y, -z, x
+
+[adxl345 bed]
+cs_pin: RP2040:gpio9
+spi_bus: spi1a
+
+[resonance_tester]
+accel_chip_x: adxl345 head
+accel_chip_y: adxl345 bed
+probe_points: 111.5, 111.5, 20
+
+[gcode_macro ADX]
+description: Shortcut to ACCELEROMETER_QUERY for both sensors
+gcode:
+    ACCELEROMETER_QUERY CHIP=head
+    ACCELEROMETER_QUERY CHIP=bed

cfgs/kamp/Adaptive_Meshing.cfg

@@ -0,0 +1,104 @@
+# # # Klipper Adaptive Meshing # # #
+
+# Heads up! If you have any other BED_MESH_CALIBRATE macros defined elsewhere in your config, you will need to comment out / remove them for this to work. (Klicky/Euclid Probe)
+# You will also need to be sure that [exclude_object] is defined in printer.cfg, and your slicer is labeling objects.
+# This macro will parse information from objects in your gcode to define a min and max mesh area to probe, creating an adaptive mesh!
+# This macro will not increase probe_count values in your [bed_mesh] config. If you want richer meshes, be sure to increase probe_count. We recommend at least 5,5.
+
+[gcode_macro BED_MESH_CALIBRATE]
+rename_existing: _BED_MESH_CALIBRATE
+gcode:
+
+    {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}                                # Gather all object points
+    {% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}                                                          # Get bed mesh min from printer.cfg
+    {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}                                                          # Get bed mesh max from printer.cfg
+    {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}                                                        # Get probe count from printer.cfg
+    {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}                                           # Pull verbose setting from _KAMP_Settings
+    {% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}                                               # Pull mesh margin setting from _KAMP_Settings
+    {% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}                                               # Pull fuzz amount setting from _KAMP_Settings
+    {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}                                             # If probe count is only a single number, convert it to 2. E.g. probe_count:7 = 7,7
+    {% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}                            # Determine max probe point distance
+    {% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}                            # Determine max probe point distance
+    {% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}                                                # Set x_min from smallest object x point
+    {% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}                                                # Set y_min from smallest object y point
+    {% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}                                                # Set x_max from largest object x point
+    {% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}                                                # Set y_max from largest object y point
+
+    {% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}                                                          # Set fuzz_range between 0 and fuzz_amount
+    {% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}            # Adapt x_min to margin and fuzz constraints
+    {% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}            # Adapt y_min to margin and fuzz constraints
+    {% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}            # Adapt x_max to margin and fuzz constraints
+    {% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}            # Adapt y_max to margin and fuzz constraints
+
+    {% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}          # Define probe_count's x point count and round up
+    {% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}          # Define probe_count's y point count and round up
+
+    {% if (([points_x, points_y]|max) > 6) %}                                                                                       # 
+        {% set algorithm = "bicubic" %}                                                                                             # 
+        {% set min_points = 4 %}                                                                                                    # 
+    {% else %}                                                                                                                      # Calculate if algorithm should be bicubic or lagrange
+        {% set algorithm = "lagrange" %}                                                                                            # 
+        {% set min_points = 3 %}                                                                                                    # 
+    {% endif %}                                                                                                                     # 
+
+    {% set points_x = [points_x, min_points]|max %}                                                                                 # Set probe_count's x points to fit the calculated algorithm
+    {% set points_y = [points_y, min_points]|max %}                                                                                 # Set probe_count's y points to fit the calculated algorithm
+    {% set points_x = [points_x, probe_count[0]]|min %}
+    {% set points_y = [points_y, probe_count[1]]|min %}
+
+    {% if verbose_enable == True %}                                                                                                 # If verbose is enabled, print information about KAMP's calculations
+
+        { action_respond_info( "Algorithm: {}.".format(                                                                              
+            (algorithm),                                                                                                            
+        )) }
+
+        { action_respond_info("Default probe count: {},{}.".format(                                                                  
+            (probe_count[0]),                                                                                                       
+            (probe_count[1]),                                                                                                       
+        )) }
+
+        { action_respond_info("Adapted probe count: {},{}.".format(                                                                  
+            (points_x),                                                                                                             
+            (points_y),                                                                                                             
+        )) }                                                                                                              
+
+        {action_respond_info("Default mesh bounds: {}, {}.".format(                                                                  
+            (bed_mesh_min[0],bed_mesh_min[1]),                                                                                      
+            (bed_mesh_max[0],bed_mesh_max[1]),                                                                                      
+        )) }
+
+        {% if mesh_margin > 0 %}                                                                                                    
+            {action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(                                       
+                (mesh_margin),                                                                                                      
+                (mesh_margin),                                                                                       
+            )) }                                                                                                                    
+        {% else %}                                                                                                                  
+            {action_respond_info("Mesh margin is 0, margin not increased.")}                                                        
+        {% endif %}                                                                                                                 
+
+        {% if fuzz_amount > 0 %}                                                                                                    
+            {action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(                                     
+                (fuzz_amount),                                                                                                      
+            )) }                                                                                                                    
+        {% else %}                                                                                                                  
+            {action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}                                                      
+        {% endif %}                                                                                                                 
+
+        { action_respond_info("Adapted mesh bounds: {}, {}.".format(                                                                 
+            (adapted_x_min, adapted_y_min),                                                                                         
+            (adapted_x_max, adapted_y_max),                                                                                         
+        )) }
+
+        {action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
+
+    {% endif %}
+
+    {% if probe_dock_enable == True %}
+        {attach_macro}                                                                                                              # Attach/deploy a probe if the probe is stored somewhere outside of the print area
+    {% endif %}
+
+    _BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
+
+    {% if probe_dock_enable == True %}
+        {detach_macro}                                                                                                              # Detach/stow a probe if the probe is stored somewhere outside of the print area
+    {% endif %}                                                                                                                     # End of verbose

cfgs/kamp/KAMP_Settings.cfg

@@ -0,0 +1,31 @@
+# Below you can include specific configuration files depending on what you want KAMP to do:
+
+[include ./Adaptive_Meshing.cfg]       # Include to enable adaptive meshing configuration.
+# [include ./KAMP/Line_Purge.cfg]             # Include to enable adaptive line purging configuration.
+
+[gcode_macro _KAMP_Settings]
+description: This macro contains all adjustable settings for KAMP 
+
+# The following variables are settings for KAMP as a whole.
+variable_verbose_enable: True               # Set to True to enable KAMP information output when running. This is useful for debugging.
+
+# The following variables are for adjusting adaptive mesh settings for KAMP.
+variable_mesh_margin: 0                     # Expands the mesh size in millimeters if desired. Leave at 0 to disable.
+variable_fuzz_amount: 0                     # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Leave at 0 to disable.
+
+# The following variables are for those with a dockable probe like Klicky, Euclid, etc.                 # ----------------  Attach Macro | Detach Macro
+variable_probe_dock_enable: False           # Set to True to enable the usage of a dockable probe.      # ---------------------------------------------
+variable_attach_macro: 'Attach_Probe'       # The macro that is used to attach the probe.               # Klicky Probe:   'Attach_Probe' | 'Dock_Probe'
+variable_detach_macro: 'Dock_Probe'         # The macro that is used to store the probe.                # Euclid Probe:   'Deploy_Probe' | 'Stow_Probe'
+                                                                                                        # Legacy Gcode:   'M401'         | 'M402'
+
+# The following variables are for adjusting adaptive purge settings for KAMP.
+variable_purge_height: 0.8                  # Z position of nozzle during purge, default is 0.8.
+variable_tip_distance: 0                    # Distance between tip of filament and nozzle before purge. Should be similar to PRINT_END final retract amount.
+variable_purge_margin: 10                   # Distance the purge will be in front of the print area, default is 10.
+variable_purge_amount: 30                   # Amount of filament to be purged prior to printing.
+variable_flow_rate: 12                      # Flow rate of purge in mm3/s. Default is 12.
+
+gcode: # Gcode section left intentionally blank. Do not disturb.
+
+    {action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

cfgs/kamp/Line_Purge.cfg

@@ -0,0 +1,113 @@
+[gcode_macro LINE_PURGE]
+description: A purge macro that adapts to be near your actual printed objects
+gcode:
+    # Get relevant printer params
+    {% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
+    {% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
+    
+    # Use firmware retraction if it is defined
+    {% if printer.firmware_retraction is defined %}
+        {% set RETRACT = G10 | string %}
+        {% set UNRETRACT = G11 | string %}
+    {% else %}
+        {% set RETRACT = 'G1 E-.5 F2100' | string %}
+        {% set UNRETRACT = 'G1 E.5 F2100' | string %}
+    {% endif %}
+
+    # Get purge settings from _Kamp_Settings
+    {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
+    {% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
+    {% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
+    {% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
+    {% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
+    {% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
+
+
+    # Calculate purge origins and centers from objects
+    {% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}    # Get all object points
+    {% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}                          # Object x min
+    {% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}                          # Object x max
+    {% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}                          # Object y min
+    {% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}                          # Object y max
+
+    {% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}      # Create center point of purge line relative to print on X axis
+    {% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}      # Create center point of purge line relative to print on Y axis
+
+    {% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}                                  # Add margin to x min, compare to 0, and choose the larger
+    {% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}                                  # Add margin to y min, compare to 0, and choose the larger
+
+    # Calculate purge speed
+    {% set purge_move_speed = (flow_rate / cross_section) * 60 | float %}
+
+    {% if cross_section != 5 %}
+
+        {action_respond_info("[Extruder] max_extrude_cross_section is not configured correctly, please set it to 5. Purge skipped.")}
+
+    {% else %}
+
+        {% if verbose_enable == True %}
+
+        {action_respond_info("Moving filament tip {}mms".format(                                                                 
+            (tip_distance),                                                                                      
+        )) }
+        {% endif %}
+
+        {% if printer.firmware_retraction is defined %}
+            {action_respond_info("KAMP purge is using firmware retraction.")}
+        {% else %}
+            {action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
+        {% endif %}
+
+        {% if purge_y_origin > 0 %}
+        
+            {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(                                                                 
+                (purge_x_center),
+                (purge_y_origin),
+                (purge_amount),
+                (flow_rate),
+            )) }
+    
+        {% else %}
+    
+            {action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(                                                                 
+                (purge_x_origin),
+                (purge_y_center),
+                (purge_amount),
+                (flow_rate),
+            )) }
+
+        {% endif %}
+
+        {% if purge_y_origin > 0 %}                                                             # If there's room on Y, purge along X axis in front of print area
+
+            G92 E0                                                                              # Reset extruder
+            G0 F{travel_speed}                                                                  # Set travel speed
+            G90                                                                                 # Absolute positioning
+            G0 X{purge_x_center} Y{purge_y_origin}                                              # Move to purge position
+            G0 Z{purge_height}                                                                  # Move to purge Z height
+            M83                                                                                 # Relative extrusion mode
+            G1 E{tip_distance} F{purge_move_speed}                                              # Move filament tip
+            G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}             # Purge line
+            {RETRACT}                                                                           # Retract
+            G92 E0                                                                              # Reset extruder distance
+            M82                                                                                 # Absolute extrusion mode
+            G0 Z{purge_height * 2} F{travel_speed}                                              # Z hop
+
+        {% else %}                                                                              # If there's room on X, purge along Y axis to the left of print area
+            
+            G92 E0                                                                              # Reset extruder
+            G0 F{travel_speed}                                                                  # Set travel speed
+            G90                                                                                 # Absolute positioning
+            G0 X{purge_x_origin} Y{purge_y_center}                                              # Move to purge position
+            G0 Z{purge_height}                                                                  # Move to purge Z height
+            M83                                                                                 # Relative extrusion mode
+            G1 E{tip_distance} F{purge_move_speed}                                              # Move filament tip
+            G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}             # Purge line
+            {RETRACT}                                                                           # Retract
+            G92 E0                                                                              # Reset extruder distance
+            M82                                                                                 # Absolute extrusion mode
+            G0 Z{purge_height * 2} F{travel_speed}                                              # Z hop
+
+        {% endif %}
+    
+    {% endif %}

cfgs/misc-macros.cfg

@@ -1,8 +1,14 @@
 [force_move]
 enable_force_move: True
 
-[temperature_sensor raspberry_pi]
-sensor_type: temperature_host
+# NOTE If you're using a Raspberry Pi, you can uncomment the next 2 lines, optionally.
+# [temperature_sensor raspberry_pi]
+# sensor_type: temperature_host
+
+# NOTE If you're using a an Orange Pi, you can uncomment the next 3 lines, optionally.
+# [temperature_sensor Orange_Pi]
+# sensor_type: temperature_host
+# sensor_path: /sys/class/thermal/thermal_zone0/temp
 
 [virtual_sdcard]
 path: /home/pi/printer_data/gcodes
@@ -22,11 +28,11 @@ gcode:
 [gcode_macro _globals]
 variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
 variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
-variable_pre_purge_prime_length: 1.4
+variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
+variable_kamp_enable: 1 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
+variable_pre_purge_prime_length: 1.40
 gcode:
-    SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
-    SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
-    SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
+    # Don't delete this section
 
 [gcode_macro CONDITIONAL_BEEP]
 gcode:
@@ -79,10 +85,7 @@ gcode:
     {% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
     ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
 
-    #   Get Boundaries
-    {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
-    {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
-    {% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
+    #   Misc variables
     {% set extrudeAmount = 26.6 %}
     {% set movementLength = 100.0 %}
     {% set movementSpeed = 15 * 60 %}
@@ -100,7 +103,7 @@ gcode:
     M83                                     ; Relative extrusion mode
     G1 E{PRE_PURGE_PRIME_LENGTH} F500       ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
     G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed}       ; intro line 1
-    #G1 E-.5 F2100                                                                       # Retract
+
     G92 E0.0                                ; reset extruder
     M82                                     ; Absolute extrusion mode
     G1 Z5.0                                 ; move nozzle to prevent scratch
@@ -116,31 +119,69 @@ gcode:
 
 [gcode_macro PRINT_START]
 gcode:
+    ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
     # Parameters
     {% set bedtemp = params.BED|int %}
     {% set hotendtemp = params.HOTEND|int %}
     {% set chambertemp = params.CHAMBER|default(0)|int %}
     
-    ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
+    # Other variables
+    {% set bedtempSlicer = bedtemp %}
+    {% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
+    {% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
+    {% set maxVelocityAdjusted =  (0.90 * maxVelocity * 60)|int %}
+    {% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
 
+    {% if printer.configfile.settings.safe_z_home %}
+        {% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
+        {% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
+    {% endif %}
+
+    {% set bedtempAlmost = ((bedtemp - 2, 0, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
+    {% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
+    {% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
+
+    # If bed-temp-almost is higher than bed-temp by a maximum of bed-temp-over
+    {% if bedtempAlmost > bedtemp %}
+        {% if (bedtempAlmost - bedtempOver) <= bedtemp %}
+            {% set bedtemp = bedtempAlmost %}
+        {% endif %}
+    {% endif %}
+
+    G90                                                  ; absolute positioning
+    M140 S{bedtempAlmost}                                ; set & don't wait for bed temp
+    M104 S{hotendtempStepOne}                            ; set & don't wait for hotend temp
     G28 X Y
-    # <insert your routines here>
-    M140 S{bedtemp}                                                              ; set & don't wait for bed temp
-    M104 S{hotendtemp}                                                           ; set & don't wait for hotend temp
+    {% if printer.configfile.settings.safe_z_home %}
+        G1 X{startX} Y{startY} F{maxVelocityAdjusted}
+    {% endif %}
 
-    M190 S{bedtemp}                                                              ; set & wait for bed temp
-    # TEMPERATURE_WAIT SENSOR="temperature_sensor chamber" MINIMUM={chambertemp}   ; wait for chamber temp
-    # <insert your routines here>
-    M109 S{hotendtemp}                                                           ; set & wait for hotend temp
-    # <insert your routines here>
-    G28 Z                                                                        ; final z homing
-    BED_MESH_PROFILE LOAD=default
-    G1 Z20 F3000                   ; move nozzle away from bed
+    M190 S{bedtempAlmost}                                ; set & wait for bed temp
+    {% if kampEnabled == 0 %}
+        M104 S{hotendtempStepTwo}                            ; set & don't wait for hotend temp
+    {% endif %}
+    M190 S{bedtemp}                                      ; set & wait for bed temp
+    M140 S{bedtempSlicer}                                ; set & don't wait for bed temp ; set temp to sliced setting regardless
+
+    {% if kampEnabled == 0 %}
+        BED_MESH_PROFILE LOAD=default                        ; NOTE if not using a mesh, comment out this line
+        M104 S{hotendtemp}                                   ; set & don't wait for hotend temp
+        G28 Z                                                ; final z homing
+    {% else %}
+        G28 Z                                                ; final z homing
+        BED_MESH_CALIBRATE                                   ; KAMP mesh
+        M104 S{hotendtemp}                                   ; set & don't wait for hotend temp
+    {% endif %}
+
+    G1 X0 Y0 F{maxVelocityAdjusted}
+    M109 S{hotendtemp}                                   ; set & wait for hotend temp
+
+    G1 Z20 F3000                                         ; move nozzle away from bed
 
 [gcode_macro PRINT_END]
 gcode:
     ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
-    CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500                               ; NOTE Comment out this line to stop the beeps at the end of a print
+    CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500
     {% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
 
     M400                                    ; wait for buffer to clear

osskc.cfg

@@ -0,0 +1,10 @@
+[include ./cfgs/misc-macros.cfg]
+[include ./cfgs/PARKING.cfg]
+[include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg]
+[include ./cfgs/CALIBRATION.cfg]
+[include ./cfgs/kamp/KAMP_Settings.cfg]
+
+# NOTE Uncomment the ONE of the following lines if you're using an adxl345
+# [include ./cfgs/adxl-rp2040.cfg]
+# [include ./cfgs/adxl-rpi-pico-2x.cfg]
+# [include ./cfgs/adxl-direct.cfg]

printer.cfg

@@ -4,17 +4,11 @@
 # 
 # See https://www.klipper3d.org/Config_Reference.html for configuration reference.
 
-[include ./cfgs/misc-macros.cfg]
-[include ./cfgs/PARKING.cfg]
-[include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg]
-
-# NOTE Uncomment the ONE of the following lines if you're using an adxl345
-# [include ./cfgs/adxl-rp2040.cfg]
-# [include ./cfgs/adxl-direct.cfg]
+[include ./osskc.cfg]
 
 [mcu]
-# NOTE Obtain definition by "ls -l /dev/serial/by-id/"
-serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+# NOTE Obtain definition by "ls -l /dev/serial/by-path/" or "ls -l /dev/serial/by-id/"
+serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2:1.0-port0
 restart_method: command
 
 [printer]
@@ -23,6 +17,7 @@ max_velocity: 200
 max_accel: 3000
 max_z_velocity: 15
 max_z_accel: 45
+square_corner_velocity: 8.0
 
 #####################################################################
 #      X/Y/Z Stepper Settings
@@ -32,7 +27,7 @@ max_z_accel: 45
 step_pin: PC2
 dir_pin: !PB9
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_x:virtual_endstop
 position_endstop: 0
@@ -54,7 +49,7 @@ diag_pin: PA5
 step_pin: PB8
 dir_pin: PB7
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_y:virtual_endstop
 position_endstop: 0
@@ -76,7 +71,7 @@ diag_pin: PA6
 step_pin: PB6
 dir_pin: !PB5
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 4
 endstop_pin: probe:z_virtual_endstop
 position_min: -4
@@ -100,7 +95,7 @@ diag_pin: PA7
 step_pin: PB4
 dir_pin: !PB3
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html
 nozzle_diameter: 0.400
 filament_diameter: 1.750
@@ -188,27 +183,26 @@ encoder_pins: ^PB14, ^PB10
 click_pin: ^!PB2
 
 [bed_screws]
-screw1: 26.5, 31
 screw1_name: front left
-screw2: 196.75, 31
+screw1: 26.5, 31
 screw2_name: front right
-screw3: 196.75, 201
+screw2: 196.75, 31
 screw3_name: back right
-screw4: 26.5, 201
+screw3: 196.75, 201
 screw4_name: back left
+screw4: 26.5, 201
 
 [screws_tilt_adjust]
-screw1: 111.5, 116.5
 screw1_name: center
-screw2: 26.5, 31
+screw1: 84.50, 135
 screw2_name: front left
-screw3: 196.75, 31
+screw2: 0, 51
 screw3_name: front right
-screw4: 196.75, 201
+screw3: 169.75, 51
 screw4_name: back right
-screw5: 26.5, 201
+screw4: 169.75, 221
 screw5_name: back left
-speed: 50
+screw5: 0, 221
 horizontal_move_z: 10
 screw_thread: CCW-M4