Merge branch 'master' into any-printer

Special considerations.

.github/FUNDING.yml

@@ -1 +0,0 @@
-ko_fi: bassamanator

.gitignore

@@ -1,7 +1,6 @@
 printer-*_*.cfg
 .moonraker.conf.bkp
 .directory
-moonraker.conf.backup
 .venv
 __pycache__
 crowsnest.conf.*

.vscode/settings.json

@@ -1,7 +1,5 @@
 {
 	"editor.tabSize": 4,
-	// "editor.formatOnSave": false,
-	// "editor.defaultFormatter": null,
 	"editor.insertSpaces": true,
 	"editor.detectIndentation": false,
 	"git.mergeEditor": false,
@@ -25,16 +23,20 @@
 		"normalsize",
 		"octahedroflake",
 		"osskc",
+		"Painis",
 		"PARKBED",
 		"PARKCENTER",
 		"PARKFRONT",
 		"PARKFRONTLOW",
 		"PARKREAR",
 		"pico",
+		"Printables",
 		"Prusa",
 		"runout",
+		"scriptsize",
 		"Sovol",
 		"textcolor",
+		"textit",
 		"texttt"
 	],
 	"[markdown]": {

README.md

@@ -1,20 +1,359 @@
-# 🚨 _One-Stop-Shop_ Klipper Configuration
+<p align="center">
+Please consider
+<a href="https://ko-fi.com/bassamanator" target="_blank">donating</a> to
+support my open source work ❤️
+</p>
 
-## This branch contains my personal settings.
+# One-Stop-Shop Klipper Configuration
 
-## Switch to a More Appropriate Branch
+| Printer                                                       | Branch                                                                                    |
+| ------------------------------------------------------------- | ----------------------------------------------------------------------------------------- |
+| ${\normalsize{\textcolor{darkturquoise}{\text{Sovol SV06}}}}$ | [master](https://github.com/bassamanator/Sovol-SV06-firmware/tree/master)                     |
+| Sovol SV06 SKR-Mini-E3-V3.0                                   | [skr-mini-e3-v3](https://github.com/bassamanator/Sovol-SV06-firmware/tree/skr-mini-e3-v3) |
+| Sovol SV06 Fly-E3-Pro-V3                                      | [fly-e3-pro-v3](https://github.com/ElPainis/Fly-E3-Pro-v3) \*\*                           |
+| Sovol SV06 Plus                                               | [sv06-plus](https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus)           |
+| All other printers                                            | ⚡ ${\scriptsize{\textcolor{darkturquoise}{\text{YOU ARE HERE}}}}$ ⚡       |
 
-| Printer                     | Branch                                                                                    |
+${\small{\textit{** Maintained by ElPainis}}}$
-| --------------------------- | ----------------------------------------------------------------------------------------- |
-| Sovol SV06                  | [master](https://github.com/bassamanator/Sovol-SV06-firmware/tree/master)                 |
-| Sovol SV06 Skr-Mini-E3-V3.0 | [skr-mini-e3-v3](https://github.com/bassamanator/Sovol-SV06-firmware/tree/skr-mini-e3-v3) |
-| Sovol SV06 Plus             | [sv06-plus](https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus)           |
-| All other printers          | [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer)       |
 
-# Speedrun
+> [!WARNING]
+> I am creating these files for my personal use and cannot be held responsible for what it might do to your printer. Use at your own risk.
 
-<a href="https://youtu.be/jGplZnNoT4I?si=1e3BTfP3vhhEvGNs" target="_blank">
+## Outline
- <img src="https://img.youtube.com/vi/jGplZnNoT4I/maxresdefault.jpg" alt="Watch the video" width="100%"/>
-</a>
 
-<img src="./images/octahedroflake.jpg" />
+- [Features](#features)
+- [Stay Up-to-Date](#stay-up-to-date)
+- [Preface](#preface)
+- [Before You Begin](#before-you-begin)
+- [Klipper Installation](#klipper-installation)
+  - [Flash Firmware](#flash-firmware)
+  - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
+  - [Setup Instructions](#setup-instructions)
+- [Adjust Your Slicer](#adjust-your-slicer)
+- [Support Me](#support-me)
+- [Directory Structure](#directory-structure)
+- [Special Considerations](#special-considerations)
+- [FAQ](#faq)
+- [Useful Resources](#useful-resources)
+- [Sovol Official Links](#sovol-official-links)
+- [Sources](#sources)
+
+## Features
+
+- 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥 CoreXY users can rightly disagree and say that it lacks the quad gantry levelling macros. Please create a pull request if you can help in this regard!
+- Filament runout sensor usage implemented.
+- Minimum configuration settings for `Mainsail` and `Fluidd`.
+- Pre-configured configuration bundles based on the [Ellis SuperSlicer Print Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles):
+  - SuperSlicer
+  - PrusaSlicer
+- Macros
+  - **Improved** mechanical gantry calibration/`G34` macro that provides the user audio feedback, and time to check the calibration.
+  - Misc macros: `PRINT_START`, `CANCEL_PRINT`, `PRINT_END`, `PAUSE`, `RESUME`.
+  - Parking macros (parks the printhead at various locations): `PARKFRONT`, `PARKFRONTLOW`, `PARKREAR`, `PARKCENTER`, `PARKBED`.
+  - Load/unload filament macros.
+  - `PURGE_LINE` macro.
+  - `TEST_SPEED` macro. Find instructions [here](#how-do-i-use-the-test_speed-macro).
+- Klipper Adaptive Meshing & Purging (KAMP) integrated. Read about it [here](#what-do-i-need-to-know-about-kamp).
+
+[🔼 Back to top](#outline)
+
+## Stay Up-to-Date
+
+${\normalsize{\textcolor{goldenrod}{\texttt{Star ⭐ this project.}}}}$
+
+Watch for [updates](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/37).
+
+<img src="./misc/images/githubstar.gif" width="500" alt='github star'/>
+
+[🔼 Back to top](#outline)
+
+## Preface
+
+Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read this documentation. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience.
+
+In many ways, this entire repository can be considered _my opinion_ on the `3D printing experience` and this has been _my attempt_ to share that experience. Some factors, such as _accuracy_ and _testing_, have been at the forefront of my thoughts during this process. I hope you find this repository suitable. Cheers.
+
+[🔼 Back to top](#outline)
+
+## Before You Begin
+
+- This entire page is a **12 minute read**. Save yourself _hours of troubleshooting_ and read this documentation fully.
+- It is assumed that you already have a working `printer.cfg` and you already have your printer up and running Klipper.
+- The [master](https://github.com/bassamanator/Sovol-SV06-firmware/tree/master) branch of this repo contains baby step by step instructions on how to get Klipper going for a particular bed printer (Sovol SV06). If you are a beginner, you might find those instructions useful.
+- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Beginner's would be wise to go through the steps mentioned [here](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md). Consider yourself warned.
+- Follow the steps in order.
+- If an error was reported at a step, do no proceed to the next step.
+- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. 💡 Most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
+- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/howto.md#disable-usb-cable-5v-pin) the USB cable's 5V pin.
+- It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
+- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
+- Klipper _must_ be up to date.
+  - In `Fluidd`, you can do this from `Settings` > `Software Updates`.
+  - In `Mainsail`, you can do this from `Machine` > `Update Manager`.
+- Robert Redford's performance in _Spy Game (2001)_ was superb!
+- ~~It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you.~~
+- Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
+- I would recommend searching for the word `NOTE` in this configuration. There are roughly half a dozen short points amongst the various files that you should be aware of.
+- You must have a `bed_mesh` for `PRINT_START` to work correctly. If you do not have a probe to create a `bed_mesh`, simply comment out the line `BED_MESH_PROFILE LOAD=default` in the `PRINT_START` macro.
+
+[🔼 Back to top](#outline)
+
+## Klipper Installation
+
+### Flash Firmware
+
+You must flash your motherboard according to the manufacturer's instructions.
+
+### Download OSS Klipper Configuration
+
+1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/any-printer.zip) the `ZIP` file containing the Klipper configuration.
+2. The parent folder in the `ZIP` is `Sovol-SV06-firmware-any-printer`. This is relevant in the next step.
+3. Extract **only** the _contents_ of the parent folder into `~/printer_data/config`.
+
+See what files are necessary and which ones can be skipped [here](#directory-structure).
+
+💡 **If** you get a warning that you already have a `moonraker.conf` **and if** you're _not_ using a low powered device such as a Raspberry Pi Zero, do not overwrite the _existing_ `moonraker.conf` and simply paste the following into it:
+
+```yaml
+[file_manager]
+enable_object_processing: True
+```
+
+### Setup Instructions
+
+Simply add `[include ./osskc.cfg]` somewhere at the top of your `printer.cfg`.
+
+And remember to _adjust your slicer_.
+
+[🔼 Back to top](#outline)
+
+## Adjust Your Slicer
+
+> [!NOTE]
+> If you are using the slicer bundles found on this repo, you can skip this section.
+
+### Start G-Code
+
+It varies depending on your slicer. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code).
+
+### End G-Code
+
+```
+PRINT_END
+```
+
+### Line Purge
+
+If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line, add one of the following:
+
+- `PURGE_LINE`; prints a standard purge line.
+- `LINE_PURGE`; prints KAMP's purge line.
+
+> [!WARNING]
+> Do not attempt to use `LINE_PURGE` without reading [this section](#what-do-i-need-to-know-about-kamp).
+
+```yaml
+# 📝 This is just an example Start G-Code
+PRINT_START ...
+PURGE_LINE
+```
+
+[🔼 Back to top](#outline)
+
+## Support Me
+
+Please ⭐ star this repository!
+
+Support [open source](https://en.wikipedia.org/wiki/Open_source), and buy me a [<img src="./misc/images/logo_white_stroke.png" height="20" alt='Ko-fi'/>](https://ko-fi.com/bassamanator).
+
+[🔼 Back to top](#outline)
+
+## Directory Structure
+
+This repository contains many files and folders. Some are _necessary_ for this Klipper configuration to work, others are not.
+
+- **Necessary** items are marked with a ✅.
+- Items that can _optionally_ be deleted are marked with a 💠.
+<!-- tree -a -C -I '.directory' -L 1 -F -->
+
+```sh
+/home/pi/printer_data/config
+├── cfgs/ ✅
+├── CODE_OF_CONDUCT.md 💠
+├── CONTRIBUTING.md 💠
+├── .github/ 💠
+├── .gitignore 💠
+├── images/ 💠
+├── LICENSE 💠
+├── misc/ 💠
+├── moonraker.conf ✅ ❔
+├── osskc.cfg ✅
+├── README.md 💠
+├── SECURITY.md 💠
+└── .vscode/ 💠
+```
+
+[🔼 Back to top](#outline)
+
+## Special Considerations
+
+### Sequential printing
+
+If enabled, cancelling, or resuming a print from pause, could lead to collisions with previously printed objects. In order to prevent collisions, in your slicer, ensure that objects are printed from the back of the build plate to the front.
+
+In PrusaSlicer, please see Printer Settings > Notes, for extruder clearances.
+
+### Renamed GCODE Commands
+
+#### BED_MESH_CALIBRATE
+
+Renamed to `_BED_MESH_CALIBRATE`.
+
+### Errors
+
+#### MCU 'mcu' shutdown: Timer too close
+
+This error often occurs when the `mcu` is unable to generate the required `microsteps`. Lower power Klipper hosts might be especially susceptible. Reducing `microsteps` to `64`, or even `32` can resolve the issue.
+
+[🔼 Back to top](#outline)
+
+## FAQ
+
+### What are some settings that I can change?
+
+Edit the relevant file according to your needs.
+
+| File                   | Section                  |
+| ---------------------- | ------------------------ |
+| `cfgs/misc-macros.cfg` | `[gcode_macro _globals]` |
+
+| Variable                           | Disable       | Enable        | Notes                                          |
+| ---------------------------------- | ------------- | ------------- | ---------------------------------------------- |
+| `variable_beeping_enabled`         | `0` (default) | `1`           |
+| `variable_filament_sensor_enabled` | `0` (default) | `1`           |
+| `variable_kamp_enable`             | `0` (default) | `1`           | See [here](#what-do-i-need-to-know-about-kamp) |
+
+### How do I import a configuration bundle into SuperSlicer/PrusaSlicer?
+
+Please see this [discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13).
+
+### How do I print using SuperSlicer/PrusaSlicer?
+
+Please see this [discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/14).
+
+### When does beeping occur?
+
+The printer will beep upon:
+
+- Filament runout.
+- Filament change/`M600`.
+- Upon `PRINT_END`.
+- `MECHANICAL_GANTRY_CALIBRATION`/`G34`.
+
+### I want to use a filament sensor. How do I set it up?
+
+You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor).
+
+You can test the sensor via `QUERY_FILAMENT_SENSOR SENSOR=filament_sensor`.
+
+### My filament runout sensor works, but I just started a print without any filament loaded. What gives?
+
+A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps.
+
+### What happens when I put in `M600`/colour change at a certain layer?
+
+1. The printer will beep 3 times (not annoyingly).
+2. Printing will stop.
+3. The printhead will park itself front center.
+4. The hotend will turn off, but the bed will remain hot.
+
+### What happens when I pause a print?
+
+Same behaviour as `M600`/colour change _except_ there won't be any beeping.
+
+### What happens when filament runs out?
+
+_If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying.
+
+### How do I resume a print after a colour change or filament runout?
+
+> [!WARNING]
+> Do not disable the stepper motors during this process!
+
+The printhead is now parked front center waiting for you to insert filament. You will:
+
+1. Heat up the hotend to the desired temperature.
+   - Use your Klipper dashboard.
+2. Purge (push) some filament through the nozzle.
+   - Use your Klipper dashboard, and extrude maybe 50mm (for a colour change you probably want to extrude more).
+   - OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_.
+3. Hit resume in your Klipper dashboard.
+
+### What do I need to know about KAMP?
+
+> [!WARNING]
+> No KAMP functionality can be used on low-powered devices such as the Raspberry Pi Zero.
+
+> [!WARNING]
+> If KAMP is disabled, and there is no `default` mesh, `PRINT_START` will crash.
+
+> [!IMPORTANT]
+> The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-objects#enable-the-label-objects-setting-in-your-slicer) in your slicer must be enabled for KAMP to work.
+
+> [!NOTE]
+> `LINE_PURGE` is useable _on appropriate devices_ even if KAMP is disabled.
+
+This repo contains all the code from the KAMP repository, however, only the `adaptive meshing` and `LINE_PURGE` functionality of KAMP has been configured and tested for use. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`.
+
+Read [KAMP official docs](https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging) to learn more.
+
+### How do I use the `TEST_SPEED` macro?
+
+> [!WARNING]
+> This is for advanced users only, with well oiled machines. You can cause serious damage to your printer if you're not careful.
+
+Find full instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/determining_max_speeds_accels.html).
+
+Some tips:
+
+- Before running with `ITERATIONS=40` with an untested speed/accel value, run with `ITERATIONS=1`.
+- Pay close attention throughout the run, so that you can click ${\small{\textcolor{red}{\texttt{EMERGENCY STOP}}}}$ at a moment's notice.
+- This macro will simply help you determine the maximum speed your printhead and bed can reliably move at, not necessarily print at. The bottleneck for my SV06, for example, is the 15mm/s^2 that the hotend maxes out at (well under 200mm/s actual print speed).
+
+### How do I compile my own firmware?
+
+Please see this [discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/111).
+
+[🔼 Back to top](#outline)
+
+## Useful Resources
+
+- [Everything Sovol SV06](https://github.com/bassamanator/everything-sovol-sv06)
+- [RP2040-Zero ADXL345 Connection Klipper](https://github.com/bassamanator/rp2040-zero-adxl345-klipper)
+- ⭐⭐⭐⭐⭐ [Ellis' Print Tuning Guide](https://ellis3dp.com/Print-Tuning-Guide)
+- [Simplify3D Print Quality Troubleshooting Guide](https://www.simplify3d.com/resources/print-quality-troubleshooting/)
+
+[🔼 Back to top](#outline)
+
+## Sovol Official Links
+
+- [SV06 Marlin Source Code](https://github.com/Sovol3d/Sv06-Source-Code)
+- [SV06 Models](https://github.com/Sovol3d/SV06-Fully-Open-Source)
+- [SV06 Plus Marlin Source Code and Models](https://github.com/Sovol3d/SV06-PLUS)
+
+[🔼 Back to top](#outline)
+
+## Sources
+
+- [https://www.klipper3d.org](https://www.klipper3d.org)
+- [Ellis' Print Tuning Guide](https://ellis3dp.com/Print-Tuning-Guide)
+- [Mechanical Gantry Calibration Macro](https://github.com/strayr/strayr-k-macros)
+- [SV06 printer.cfg](https://github.com/spinixguy/Sovol-SV06-firmware)
+- [SV06 Buildplate and Texture](https://www.printables.com/model/378915-sovol-sv06-buildplate-texture-and-model-for-prusas)
+- [Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)
+- [Klipper Adaptive Meshing & Purging](https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging)
+- [PrusaSlicer Print Settings](https://github.com/mjonuschat/PrusaSlicer-Profiles)
+
+[![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/H2H0HIHTH)
+
+[🔼 Back to top](#outline)

cfgs/GET_VARIABLE.cfg

@@ -1,52 +0,0 @@
-# Author FatalBulletHit, https://github.com/FatalBulletHit
-[gcode_macro GET_VARIABLE]
-gcode:
-    {% set names = (params.NAME).split('.')|list %}
-    {% set join = (params.JOIN)|default(1)|int %}
-    
-    {% set _dummy0 = namespace( break = 0 ) %}
-    {% set _dummy1 = namespace( out = printer[names|first] ) %}
-    
-    {% for name in names if _dummy0.break == 0 %}
-        {% if loop.index > 1 %}
-            {% if name in _dummy1.out %}
-                {% set _dummy1.out = _dummy1.out[name] %}
-            {% elif name[0] in '0123456789' and _dummy1.out is iterable and _dummy1.out is not string and _dummy1.out is not mapping and _dummy1.out|length > name[0]|int %}
-                {% set _dummy1.out = _dummy1.out[name|int] %}
-            {% else %}
-                {% set _dummy0.break = loop.index0 %}
-            {% endif %}
-        {% endif %}
-    {% endfor %}
-    
-    {% if _dummy1.out is boolean %}
-        { action_respond_info('Type: boolean') }
-    {% elif _dummy1.out is float %}
-        { action_respond_info('Type: float') }
-    {% elif _dummy1.out is integer %}
-        { action_respond_info('Type: integer') }
-    {% elif _dummy1.out is mapping %}
-        { action_respond_info('Type: mapping') }
-    {% elif _dummy1.out is string %}
-        { action_respond_info('Type: string') }
-    {% elif _dummy1.out is iterable %}
-        { action_respond_info('Type: iterable') }
-    {% elif _dummy1.out is none %}
-        { action_respond_info('Type: none') }
-    {% elif _dummy1.out is undefined %}
-        { action_respond_info('Type: undefined') }
-    {% elif _dummy1.out is callable %}
-        { action_respond_info('Type: callable') }
-    {% else %}
-        { action_respond_info('Type: unknown') }
-    {% endif %}
-    
-    {% if join and _dummy1.out is iterable and _dummy1.out is not string and _dummy1.out is not mapping %}
-        { action_respond_info('%s' % _dummy1.out|join("\n")) }
-    {% else %}
-        { action_respond_info('%s' % _dummy1.out) }
-    {% endif %}
-    
-    {% if _dummy0.break != 0 %}
-        { action_respond_info('"printer.%s" does not contain "%s"!' % (names[0:_dummy0.break]|join('.'), names[_dummy0.break])) }
-    {% endif %}

cfgs/misc-macros.cfg

@@ -5,13 +5,13 @@ timeout: 600
 enable_force_move: True
 
 # NOTE If you're using a Raspberry Pi, you can uncomment the next 2 lines, optionally.
-#[temperature_sensor raspberry_pi]
+# [temperature_sensor raspberry_pi]
-#sensor_type: temperature_host
+# sensor_type: temperature_host
 
 # NOTE If you're using a an Orange Pi, you can uncomment the next 3 lines, optionally.
-[temperature_sensor Orange_Pi]
+# [temperature_sensor Orange_Pi]
-sensor_type: temperature_host
+# sensor_type: temperature_host
-sensor_path: /sys/class/thermal/thermal_zone0/temp
+# sensor_path: /sys/class/thermal/thermal_zone0/temp
 
 [virtual_sdcard]
 path: /home/pi/printer_data/gcodes
@@ -23,17 +23,16 @@ path: /home/pi/printer_data/gcodes
 [pause_resume]
 [display_status]
 
-[delayed_gcode DISABLEFILAMENTSENSOR]
+# NOTE If you have a filament sensor, uncomment the following 4 lines
-initial_duration: 1
+# [delayed_gcode DISABLEFILAMENTSENSOR]
-gcode:
+# initial_duration: 1
-    SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
+# gcode:
+#     SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
 
 [gcode_macro _globals]
-# NOTE 0 = false; 1 = true
+variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
-variable_filament_sensor_enabled: 1 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
+variable_beeping_enabled: 0 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
-variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
 variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
-variable_bed_temp_not_exact: 1 # NOTE Start print if bed temperature is `target temperature - 1` but continue to heat until target is reached
 variable_kamp_enable: 0 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
 variable_pre_purge_prime_length: 1.40
 gcode:
@@ -77,20 +76,12 @@ gcode:
 [gcode_macro M190]
 rename_existing: M99190
 gcode:
-    # Variables
+    #Parameters
-    {% set bedtempNotExact = printer["gcode_macro _globals"].bed_temp_not_exact|default(1)|int %}
-
-    # Parameters
     {% set s = params.S|float %}
 
     M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
     {% if s != 0 %}
-        {% if bedtempNotExact == 1 %}
+        TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
-            TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s-1} MAXIMUM={s+1}  ; set & wait for bed temp (within -1 or +1 degree)
-            M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; set & don't wait for bed temp
-        {% else %}
-            TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}    ; Wait for bed temp (within +1 degree)
-        {% endif %}
     {% endif %}
 
 [gcode_macro PURGE_LINE]
@@ -107,7 +98,7 @@ gcode:
 
     #   Set safe speeds
     {% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
-    {% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int %}
+    {% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
 
     G92 E0.0                                ; reset extruder
     G90                                     ; Absolute positioning
@@ -142,7 +133,7 @@ gcode:
     {% set bedtempSlicer = bedtemp %}
     {% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
     {% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
-    {% set maxVelocityAdjusted = (0.90 * maxVelocity * 60)|int %}
+    {% set maxVelocityAdjusted =  (0.90 * maxVelocity * 60)|int %}
     {% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
 
     {% if printer.configfile.settings.safe_z_home %}
@@ -205,8 +196,8 @@ gcode:
     #   Set safe speeds
     {% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
     {% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
-    {% set zVelocityAdjusted = (0.95 * zVelocity * 60)|int  %}
+    {% set zVelocityAdjusted =  (0.95 * zVelocity * 60)|int  %}
-    {% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int  %}
+    {% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
 
     #   Get Boundaries
     {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
@@ -336,4 +327,4 @@ gcode:
         G4 P{dur}
         SET_PIN PIN=beeper VALUE=0
         G4 P{dur}
-    {% endfor %}
+    {% endfor %}

cfgs/timelapse.cfg

@@ -1,424 +0,0 @@
-# Timelapse klipper macro definition
-#
-# Copyright (C) 2021 Christoph Frei <fryakatkop@gmail.com>
-# Copyright (C) 2021 Alex Zellner <alexander.zellner@googlemail.com>
-#
-# This file may be distributed under the terms of the GNU GPLv3 license
-#
-# Macro version 1.14
-#
-
-##### DO NOT CHANGE ANY MACRO!!! #####
-
-##########################################################################
-#                                                                        #
-# GET_TIMELAPSE_SETUP: Print the Timelapse setup to console              #
-#                                                                        #
-##########################################################################
-
-[gcode_macro GET_TIMELAPSE_SETUP]
-description: Print the Timelapse setup
-gcode: 
-  {% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
-  {% set output_txt = ["Timelapse Setup:"] %}
-  {% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
-  {% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
-  {% if tl.park.enable %}
-    {% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
-    {% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
-    {% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
-  {% endif %}
-  {% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
-  {% if not tl.extruder.fw_retract %}
-    {% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
-    {% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
-  {% endif %}
-  {% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
-  {action_respond_info(output_txt|join("\n"))}
-
-################################################################################################
-#                                                                                              #
-# Use _SET_TIMELAPSE_SETUP [ENABLE=value] [VERBOSE=value] [PARK_ENABLE=value] [PARK_POS=value] #
-#                          [PARK_TIME=value] [CUSTOM_POS_X=value] [CUSTOM_POS_Y=value]         #
-#                          [CUSTOM_POS_DZ=value][TRAVEL_SPEED=value] [RETRACT_SPEED=value]     #
-#                          [EXTRUDE_SPEED=value] [EXTRUDE_DISTANCE=value]                      #
-#                          [RETRACT_DISTANCE=value] [FW_RETRACT=value]                         #
-#                                                                                              #
-################################################################################################
-
-[gcode_macro _SET_TIMELAPSE_SETUP]
-description: Set user parameters for timelapse
-gcode:
-  {% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
-  ##### get min and max bed size #####
-  {% set min = printer.toolhead.axis_minimum %}
-  {% set max = printer.toolhead.axis_maximum %}
-  {% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch'] 
-                else False %}
-  {% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
-                            'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
-                 'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
-                            'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
-                 'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
-                            'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
-  ##### set new values #####
-  {% if params.ENABLE %}
-    {% if params.ENABLE|lower is in ['true', 'false'] %}
-      SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
-    {% else %}
-      {action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
-    {% endif %}
-  {% endif %}
-  {% if params.VERBOSE %}
-    {% if params.VERBOSE|lower is in ['true', 'false'] %}
-      SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
-    {% else %}
-      {action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
-    {% endif %}
-  {% endif %}
-  {% if params.CUSTOM_POS_X %}
-    {% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
-      {% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
-    {% endif %}
-  {% endif %}
-  {% if params.CUSTOM_POS_Y %}
-    {% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
-      {% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
-    {% endif %}
-  {% endif %}
-  {% if params.CUSTOM_POS_DZ %}
-    {% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
-      {% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
-    {% endif %}
-  {% endif %}
-  {% if params.PARK_ENABLE %}
-    {% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
-      {% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
-    {% else %}
-      {action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
-    {% endif %}
-  {% endif %}
-  {% if params.PARK_POS %}
-    {% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
-      {% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
-                    'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
-                    'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
-                    'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
-                    'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
-                    'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
-                    'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
-                    'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
-      {% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
-      {% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
-    {% else %}
-      {action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
-                          % params.PARK_POS|upper)}
-    {% endif %}
-  {% endif %}
-  {% if params.PARK_TIME %}
-    {% if params.PARK_TIME|float >= 0.0 %}
-      {% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
-    {% endif %}
-  {% endif %}
-  SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
-  {% if params.TRAVEL_SPEED %}
-    {% if params.TRAVEL_SPEED|float > 0.0 %}
-      {% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
-    {% endif %}
-  {% endif %}
-  {% if params.RETRACT_SPEED %}
-    {% if params.RETRACT_SPEED|float > 0.0 %}
-      {% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
-    {% endif %}
-  {% endif %}
-  {% if params.EXTRUDE_SPEED %}
-    {% if params.EXTRUDE_SPEED|float > 0.0 %}
-      {% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
-    {% endif %}
-  {% endif %}
-  SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
-  {% if params.EXTRUDE_DISTANCE %}
-    {% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
-      {% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
-    {% endif %}
-  {% endif %}
-  {% if params.RETRACT_DISTANCE %}
-    {% if params.RETRACT_DISTANCE|float >= 0.0 %}
-      {% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
-    {% else %}
-      {action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
-    {% endif %}
-  {% endif %}
-  {% if params.FW_RETRACT %}
-    {% if params.FW_RETRACT|lower is in ['true', 'false'] %}
-      {% if 'firmware_retraction' in printer.configfile.settings %}
-        {% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
-      {% else %}
-        {% set _dummy = tl.extruder.update({'fw_retract':False}) %}
-        {% if params.FW_RETRACT|capitalize == 'True' %}
-          {action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
-        {% endif %}
-      {% endif %}
-    {% else %}
-      {action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
-    {% endif %}
-  {% endif %}
-  SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
-  {% if printer.configfile.settings['gcode_macro pause'] is defined %}
-    {% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
-  {% endif %}
-  {% if printer.configfile.settings['gcode_macro resume'] is defined %}
-    {% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
-  {% endif %}
-  SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"
-
-##########################################################################
-#                                                                        #
-# TIMELAPSE_TAKE_FRAME: take the next picture                            #
-#                                                                        #
-##########################################################################
-
-######################### definition #########################
-## enable: enable or disable the next frame. Valid inputs: [True, False]
-## takingframe: internal use. Valid inputs: [True, False]
-##
-## park.enable: enable or disable to park the head while taking a picture. Valid inputs: [True, False]
-## park.pos   : used position for parking. Valid inputs: [center, front_left, front_right, back_left, back_right, custom, x_only, y_only]
-## park.time  : used for the debug macro. Time in s
-## park.custom.x, park.custom.y: coordinates of the custom parkposition. Unit [mm]
-## park.custom.dz              : custom z hop for the picture. Unit [mm]
-## park.coord : internal use
-##
-## extruder.fw_retract: enable disable fw retraction [True,False]
-## extruder.extrude   : filament extruded at the end of park. Unit [mm]
-## extruder.retract   : filament retract at the start of park. Unit [mm]
-##
-## speed.travel : used speed for travel from and to the park positon. Unit: [mm/min]
-## speed.retract: used speed for retract [mm/min]
-## speed.extrude: used speed for extrude [mm/min]
-##
-## verbose: Enable mesage output of TIMELAPSE_TAKE_FRAME
-##
-## restore.absolute.coordinates: internal use
-## restore.absolute.extrude    : internal use
-## restore.speed               : internal use
-## restore.e                   : internal use
-## restore.factor.speed        : internal use
-## restore.factor.extrude      : internal use
-##
-## macro.pause  : internal use
-## macro.resume : internal use
-##
-## is_paused: internal use
-###############################################################
-[gcode_macro TIMELAPSE_TAKE_FRAME]
-description: Take Timelapse shoot
-variable_enable: False
-variable_takingframe: False
-variable_park: {'enable': False,
-                'pos'   : 'center',
-                'time'  : 0.1,
-                'custom': {'x': 0, 'y': 0, 'dz': 0},
-                'coord' : {'x': 0, 'y': 0, 'dz': 0}}
-variable_extruder: {'fw_retract': False,
-                    'retract': 1.0,
-                    'extrude': 1.0}
-variable_speed: {'travel': 100,
-                 'retract': 15,
-                 'extrude': 15}
-variable_verbose: True
-variable_restore: {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
-variable_macro: {'pause': 'PAUSE', 'resume': 'RESUME'}
-variable_is_paused: False
-gcode:
-  {% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
-  {% if enable %}
-    {% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
-          (not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
-      {% if park.enable %}
-        {% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '', 
-                      'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '', 
-                      'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
-        {% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
-                                       'extrude'    : printer.gcode_move.absolute_extrude},
-                          'speed'   : printer.gcode_move.speed,
-                          'e'       : printer.gcode_move.gcode_position.e,
-                          'factor'  : {'speed'  : printer.gcode_move.speed_factor,
-                                       'extrude': printer.gcode_move.extrude_factor}} %}
-        SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
-        {% if not printer[printer.toolhead.extruder].can_extrude %}
-          {% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
-        {% else %}
-          {% if extruder.fw_retract %}
-            G10
-          {% else %}
-            M83     ; insure relative extrusion
-            G0 E-{extruder.retract} F{speed.retract * 60}
-          {% endif %}
-        {% endif %}
-        SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True 
-        {macro.pause}            ; execute the klipper PAUSE command
-        SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
-        G90                      ; insure absolute move
-        {% if "xyz" not in printer.toolhead.homed_axes %}
-          {% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
-        {% else %}
-          G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
-        {% endif %}
-        SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
-        UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
-        M400
-      {% endif %}
-      _TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
-    {% endif %}    
-  {% else %}
-    {% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
-  {% endif %}
-
-[gcode_macro _TIMELAPSE_NEW_FRAME]
-description: action call for timelapse shoot. must be a seperate macro
-gcode:  
- {action_call_remote_method("timelapse_newframe", 
-                            macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park, 
-                            hyperlapse=params.HYPERLAPSE)}
-
-[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
-gcode:
-  {% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
-  {% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
-  {% if tl.takingframe %}
-    UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
-  {% else %}
-    {tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
-    SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
-    {% if not printer[printer.toolhead.extruder].can_extrude %}
-        {action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
-    {% else %}
-      {% if tl.extruder.fw_retract %}
-        G11
-      {% else %}
-        G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
-        G0 F{tl.restore.speed}
-        {% if tl.restore.absolute.extrude %} 
-          M82
-          G92 E{tl.restore.e}
-        {% endif %}
-      {% endif %}
-    {% endif %}
-    {% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
-    {% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
-    {% if not tl.restore.absolute.coordinates %} G91 {% endif %}
-  {% endif %}
-
-####################################################################################################
-#                                                                                                  #
-# HYPERLAPSE: Starts or stops a Hyperlapse video                                                   #
-# Usage: HYPERLAPSE ACTION=START [CYCLE=time] starts a hyperlapse with cycle time (default 30 sec) #
-#        HYPERLAPSE ACTION=STOP stops the hyperlapse recording                                     # 
-#                                                                                                  #
-####################################################################################################
-
-######################### definition #########################
-## cycle: cycle time in seconds
-## run: internal use [True/False]
-###############################################################
-[gcode_macro HYPERLAPSE]
-description: Start/Stop a hyperlapse recording
-variable_cycle: 0
-variable_run: False
-gcode:
-  {% set cycle = params.CYCLE|default(30)|int %}
-  {% if params.ACTION and params.ACTION|lower == 'start' %}
-    {action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
-    SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
-    SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
-    UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
-    TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
-  {% elif params.ACTION and params.ACTION|lower == 'stop' %}
-    {% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
-    SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
-    UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
-  {% else %}
-    {action_raise_error("Hyperlapse: No valid input parameter
-                         Use: 
-                         - HYPERLAPSE ACTION=START [CYCLE=time]
-                         - HYPERLAPSE ACTION=STOP")}
-  {% endif %}
-
-[delayed_gcode _HYPERLAPSE_LOOP]
-gcode:
-  UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
-  TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
-
-##########################################################################
-#                                                                        #
-# TIMELAPSE_RENDER: Render the video at print end                        #
-#                                                                        #
-##########################################################################
-
-######################### definition #########################
-## render: internal use. Valid inputs: [True, False]
-## run_identifier: internal use. Valid input [0 .. 3]
-###############################################################
-[gcode_macro TIMELAPSE_RENDER]
-description: Render Timelapse video and wait for the result
-variable_render: False
-variable_run_identifier: 0
-gcode:
-  {action_respond_info("Timelapse: Rendering started")}
-  {action_call_remote_method("timelapse_render", byrendermacro="True")}
-  SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
-  {printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
-  UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
-
-[delayed_gcode _WAIT_TIMELAPSE_RENDER]
-gcode:
-  {% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
-  SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
-  {% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
-    M117 Rendering {['-','\\','|','/'][ri]}
-    UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
-  {% else %}
-    {action_respond_info("Timelapse: Rendering finished")}
-    M117
-    {printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
-  {% endif %}
-
-##########################################################################
-#                                                                        #
-# TEST_STREAM_DELAY: Helper macro to find stream and park delay          #
-#                                                                        #
-##########################################################################
-
-[gcode_macro TEST_STREAM_DELAY]
-description: Helper macro to find stream and park delay
-gcode:
-  {% set min = printer.toolhead.axis_minimum %}
-  {% set max = printer.toolhead.axis_maximum %}
-  {% set act = printer.toolhead.position %}
-  {% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
-  {% if act.z > 5.0 %}
-    G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
-    G0 X{(max.x-min.x)/2}
-    G4 P{tl.park.time|float * 1000}
-    _TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
-    G0 X{max.x - 5.0}
-  {% else %}
-    {action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
-  {% endif %}

crowsnest.conf

@@ -1,60 +0,0 @@
-#### crowsnest.conf
-#### This is a typical default config.
-#### Also used as default in mainsail / MainsailOS
-#### See:
-#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
-#### for details to configure to your needs.
-
-
-#####################################################################
-####                                                            #####
-####      Information about ports and according URL's           #####
-####                                                            #####
-#####################################################################
-####                                                            #####
-####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
-####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
-####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
-####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
-####                                                            #####
-#####################################################################
-####    RTSP Stream URL: ( if enabled and supported )           #####
-####    rtsp://<ip>:<rtsp_port>/stream.h264                     #####
-#####################################################################
-
-
-[crowsnest]
-log_path: /home/pi/printer_data/logs/crowsnest.log
-log_level: verbose                      # Valid Options are quiet/verbose/debug
-delete_log: false                       # Deletes log on every restart, if set to true
-no_proxy: false
-
-[cam 1]
-mode: ustreamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
-                                        # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
-enable_rtsp: false                      # If camera-streamer is used, this enables also usage of an rtsp server
-rtsp_port: 8554                         # Set different ports for each device!
-port: 8080                              # HTTP/MJPG Stream/Snapshot Port
-device: /dev/video0                     # See Log for available ...
-# resolution: 640x480 # 4:3
-# resolution: 800x600 # 4:3
-# resolution: 960x720 # 4:3
-# resolution: 1024x768 # 4:3
-# resolution: 1152x864 # 4:3
-# resolution: 1280x960 # 4:3
-# resolution: 1400x1050 # 4:3
-# resolution: 1440x1080 # 4:3
-# resolution: 1600x1200 # 4:3
-# resolution: 1856x1392 # 4:3
-# resolution: 1920x1440 # 4:3
-# resolution: 640x360 	# 16:9 nHD
-# resolution: 854x480 	# 16:9 FWVGA
-# resolution: 960x540 	# 16:9 qHD
-# resolution: 1024x576 	# 16:9 WSVGA
-resolution: 1280x720 	# 16:9 HD
-# resolution: 1366x768 	# 16:9 FWXGA
-# resolution: 1600x900 	# 16:9 HD+
-# resolution: 1920x1080 # 16:9 Full HD
-max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
-#custom_flags:                          # You can run the Stream Services with custom flags.
-#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

differences.md

@@ -1,6 +0,0 @@
-# Differences
-
-| Property                  | Marlin | OSS Klipper Config |
-| ------------------------- | ------ | ------------------ |
-| `stepper_z` `run_current` | 0.800  | 0.900              |
-| `microsteps`              | 16     | 128                |

misc/M503-output.yml

@@ -1,63 +0,0 @@
-Recv: echo:; Linear Units:
-Recv: echo:  G21 ; (mm)
-Recv: echo:; Temperature Units:
-Recv: echo:  M149 C ; Units in Celsius
-Recv: echo:; Filament settings (Disabled):
-Recv: echo:  M200 S0 D1.75
-Recv: echo:; Steps per unit:
-Recv: echo:  M92 X80.00 Y80.00 Z800.00 E691.50
-Recv: echo:; Max feedrates (units/s):
-Recv: echo:  M203 X200.00 Y200.00 Z12.00 E120.00
-Recv: echo:; Max Acceleration (units/s2):
-Recv: echo:  M201 X1000.00 Y1000.00 Z200.00 E5000.00
-Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
-Recv: echo:  M204 P1000.00 R1250.00 T1500.00
-Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
-Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.01
-Recv: echo:; Home offset:
-Recv: echo:  M206 X0.00 Y0.00 Z0.00
-Recv: echo:; Unified Bed Leveling:
-Recv: echo:  M420 S1 Z10.00 ; Leveling ON
-Recv: Unified Bed Leveling System v1.01 active
-Recv: echo:Active Mesh Slot 0
-Recv: echo:EEPROM can hold 2 meshes.
-Recv: echo:; X-Twist Correction:
-Recv:   M423 A0.00 I110.00
-Recv:   M423 X0 Z0.00
-Recv:   M423 X1 Z0.00
-Recv:   M423 X2 Z0.00
-Recv: echo:; Material heatup parameters:
-Recv: echo:  M145 S0 H200.00 B60.00 F0
-Recv: echo:  M145 S1 H240.00 B70.00 F0
-Recv: echo:  M145 S2 H205.00 B45.00 F0
-Recv: echo:  M145 S3 H260.00 B70.00 F0
-Recv: echo:; Hotend PID:
-Recv: echo:  M301 P23.48 I2.99 D46.09
-Recv: echo:; Bed PID:
-Recv: echo:  M304 P163.96 I28.03 D639.32
-Recv: echo:; User thermistors:
-Recv: echo:  M305 P0 R4700.0 T94162.0 B4160.0 C0.000000000 ; HOTEND 0
-Recv: echo:; Power-loss recovery:
-Recv: echo:  M413 S0 ; OFF
-Recv: echo:; Z-Probe Offset:
-Recv: echo:  M851 X28.00 Y-20.00 Z-2.02 ; (mm)
-Recv: echo:; Stepper driver current:
-Recv: echo:  M906 X860 Y900 Z1000
-Recv: echo:  M906 T0 E550
-Recv: echo:; Hybrid Threshold:
-Recv: echo:  M913 X183 Y183 Z41
-Recv: echo:  M913 T0 E60
-Recv: echo:; StallGuard threshold:
-Recv: echo:  M914 X65 Y68
-Recv: echo:; Driver stepping mode:
-Recv: echo:  M569 S1 X Y Z
-Recv: echo:  M569 S1 T0 E
-Recv: echo:; Input Shaping:
-Recv: echo:  M593 X F40.00 D0.15
-Recv: echo:  M593 Y F40.00 D0.15
-Recv: echo:; Linear Advance:
-Recv: echo:  M900 K0.05
-Recv: echo:; Filament load/unload:
-Recv: echo:  M603 L0.00 U50.00 ; (mm)
-Recv: echo:; Filament runout sensor:
-Recv: echo:  M412 S0 ; Sensor OFF

misc/how-to-update.md

@@ -1,73 +0,0 @@
-\*\* _Flashing the firmware is not required for any method_
-
-## Should You Update?
-
-I treat this config like software, and like any piece of modern software, it will require periodic updates to fix issues, add features, improve functionality, etc. So, if you want to have the latest and greatest, I recommend you periodically pull the changes from this repo.
-
-### What Changes Should You Be Concerned With
-
-The only changes you need to be concerned with relate to the `.cfg` and `.conf` files; all changes to `.md` files (these are markdown files, the text that you see when you visit this repo) can be ignored.
-
-### Git Users
-
-If you do a `git diff origin/master --name-only` and it shows you that a `.cfg` file has changed, you might want to pull in those changes (but you don't have to).
-
-### Non-Git Users
-
-Unfortunately, there's no simple way for you to ascertain whether there have been changes. I simply recommend that you update your config via the instructions below from time to time.
-
-## How to Update
-
-There are three methods to accomplish this:
-
-1. The correct method, using `git`.
-2. The mostly acceptable method, without using `git`.
-3. The start-from-scratch method. _Recommended for non-git users and those who haven't made many changes to their configuration._
-
-### The `git` method.
-
-⚠️ This method is only intended for those who already know how to use `git`.
-
-📝 In this example, I'm using the `master` branch which applies to SV06 users only. Be sure to use the appropriate branch for your printer.
-
-📝 The assumption is that you didn't change branches after the initial setup, so you are in `master`, and there are many untracked changes.
-
-1. `ssh` into your Klipper host.
-2. `cd ~/printer_data/config`
-3. `git checkout -b my-settings`
-4. `git add .`
-5. `git commit -m "Saving my settings."`
-6. `git checkout master`
-7. `git pull`
-8. `git checkout my-settings`
-9. `git merge master --no-ff --no-commit`
-10. Deal with comparing and pulling in incoming changes from `master` using your favourite code editor. You can also do this from the command line via `git commit --interactive`, however, only advanced `git` users should attempt this, though it is easy enough.
-11. Add all welcomed changes to the staging area, and discard all other changes.
-12. `git commit -m "Update with upstream."`
-
-You should push your branch to your own fork of this repo.
-
-For any future updates, you can run through the same process again, however, you cannot re-create the `my-settings` branch as you did in `step 3`, because it already exists. Simply omit the `-b` flag in `step 3` next time you update.
-
-### The mostly acceptable method.
-
-This method has shortcomings, because it relies on the user's memory, and requires more manual edits. Perfectly functional method, however.
-
-1. Read all the documentation.
-2. Backup your current configuration, essentially everything inside `~/printer_data/config`.
-3. Repeat steps in [Download OSS Klipper Configuration](https://github.com/bassamanator/Sovol-SV06-firmware#download-oss-klipper-configuration), and [Adjust Configuration with MCU Path](https://github.com/bassamanator/Sovol-SV06-firmware#adjust-configuration-with-mcu-path).
-4. Copy everything from `#*# <---------------------- SAVE_CONFIG ---------------------->` onward and paste into new `printer.cfg`, inclusive.
-5. Copy any other changes you might have made into the new configuration. Maybe you had adjusted the size of your printer (`position_max`), or other such changes.
-
-### The start-from-scratch method.
-
-1. Delete the folder `~/printer_data/config`.
-2. Recreate the folder `~/printer_data/config` via `mkdir ~/printer_data/config`.
-3. Start the Klipper installation process starting from `Download OSS Klipper Configuration` in the appropriate branch.
-
-## Linux Tips
-
-- In linux, you can delete files via `rm fileName` and directories via `rmdir directoryName`.
-- In linux, you can list files and folders via `ls -lah`.
-
-You are now up-to-date with this repo, and have added your personal settings on top.

moonraker.conf

@@ -5,12 +5,21 @@ klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
 
 [authorization]
 trusted_clients:
-# Enter your client IP here or range here
+    10.0.0.0/16
- 192.168.1.0/24
+    10.0.0.0/8
- 10.0.0.0/24
+    127.0.0.0/8
+    169.254.0.0/16
+    172.16.0.0/12
+    192.168.0.0/16
+    FE80::/10
+    ::1/128
 cors_domains:
-# Allow CORS requests for Fluidd
+    http://*.lan
- http://app.fluidd.xyz
+    http://*.local
+    https://my.mainsail.xyz
+    http://my.mainsail.xyz
+    https://app.fluidd.xyz
+    http://app.fluidd.xyz
 
 [octoprint_compat]
 
@@ -29,23 +38,4 @@ path: ~/mainsail
 [file_manager]
 # NOTE Cancel objects feature is enabled. If you're using a low powered device, set to False.
 # Also see [exclude_object] section in printer.cfg.
-enable_object_processing: True
+enable_object_processing: True
-
-# Crowsnest update_manager entry
-# [update_manager crowsnest]
-# type: git_repo
-# path: ~/crowsnest
-# origin: https://github.com/mainsail-crew/crowsnest.git
-# managed_services: crowsnest
-# install_script: tools/pkglist.sh
-
-# [update_manager timelapse]
-# type: git_repo
-# primary_branch: main
-# path: ~/moonraker-timelapse
-# origin: https://github.com/mainsail-crew/moonraker-timelapse.git
-# managed_services: klipper moonraker
-
-# [timelapse]
-# output_path: ~/printer_data/timelapse/
-# frame_path: /tmp/timelapse/printer

osskc.cfg

@@ -4,10 +4,8 @@
 [include ./cfgs/CALIBRATION.cfg]
 [include ./cfgs/kamp/KAMP_Settings.cfg]
 [include ./cfgs/TEST_SPEED.cfg]
-[include ./cfgs/GET_VARIABLE.cfg]
-[include ./cfgs/timelapse.cfg]
 
 # NOTE Uncomment the ONE of the following lines if you're using an adxl345
 # [include ./cfgs/adxl-rp2040.cfg]
 # [include ./cfgs/adxl-rpi-pico-2x.cfg]
-# [include ./cfgs/adxl-rpi-direct.cfg]
+# [include ./cfgs/adxl-direct.cfg]

printer.cfg

@@ -1,313 +0,0 @@
-# This file contains pin mappings for the stock Sovol SV06.
-# 
-# Find installation instructions at https://github.com/bassamanator/Sovol-SV06-firmware
-# 
-# See https://www.klipper3d.org/Config_Reference.html for configuration reference.
-
-[include ./osskc.cfg]
-
-[mcu]
-# NOTE Obtain definition by "ls -l /dev/serial/by-path/" or "ls -l /dev/serial/by-id/"
-#serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2:1.0-port0
-#serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.0-port0
-serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
-restart_method: command
-
-[printer]
-kinematics: cartesian
-max_velocity: 300
-max_accel: 11000
-max_z_velocity: 15
-max_z_accel: 45
-square_corner_velocity: 8.0
-
-#####################################################################
-#      X/Y/Z Stepper Settings
-#####################################################################
-
-[stepper_x]
-step_pin: PC2
-dir_pin: !PB9
-enable_pin: !PC3
-microsteps: 128
-rotation_distance: 40
-endstop_pin: tmc2209_stepper_x:virtual_endstop
-position_endstop: 0
-position_max: 223 # NOTE You can adjust this if you have more room
-homing_speed: 40
-homing_retract_dist: 0
-
-[tmc2209 stepper_x]
-uart_pin: PC1
-run_current: 0.900 # 0.860 marlin & master
-stealthchop_threshold: 0
-interpolate: False
-sense_resistor: 0.150
-uart_address: 3
-driver_SGTHRS: 81
-diag_pin: PA5
-
-[stepper_y]
-step_pin: PB8
-dir_pin: PB7
-enable_pin: !PC3
-microsteps: 128
-rotation_distance: 40
-endstop_pin: tmc2209_stepper_y:virtual_endstop
-position_endstop: 0
-position_max: 223 # NOTE You can adjust this if you have more room
-homing_speed: 40
-homing_retract_dist: 0
-
-[tmc2209 stepper_y]
-uart_pin: PC0
-run_current: 0.900
-stealthchop_threshold: 0
-interpolate: False
-sense_resistor: 0.150
-uart_address: 3
-driver_SGTHRS: 81
-diag_pin: PA6
-
-[stepper_z]
-step_pin: PB6
-dir_pin: !PB5
-enable_pin: !PC3
-microsteps: 128
-rotation_distance: 4
-endstop_pin: probe:z_virtual_endstop
-position_min: -3
-position_max: 258 # NOTE You can adjust this if you have more room
-homing_speed: 5
-
-[tmc2209 stepper_z]
-uart_pin: PA15
-run_current: 0.800 # 0.900 prev personal # 0.800 marlin # 1.000 master
-stealthchop_threshold: 0
-interpolate: False
-sense_resistor: 0.150
-uart_address: 3
-diag_pin: PA7
-
-#####################################################################
-#   Extruder
-#####################################################################
-
-[extruder]
-step_pin: PB4
-dir_pin: !PB3
-enable_pin: !PC3
-microsteps: 128
-rotation_distance: 4.65 # NOTE Calibrate e-steps https://www.klipper3d.org/Rotation_Distance.html#calibrating-rotation_distance-on-extruders, https://github.com/bassamanator/everything-sovol-sv06/blob/main/howto.md#calibrate-esteps
-nozzle_diameter: 0.400
-filament_diameter: 1.750
-heater_pin: PA1
-sensor_type: EPCOS 100K B57560G104F
-sensor_pin: PC5
-min_temp: 0
-max_temp: 300
-max_extrude_only_distance: 150.0
-max_extrude_cross_section: 5 # NOTE Needed for KAMP purge
-pressure_advance: 0.026 # 0.031 # 0.0435 # 0.0465 # 0.044
-
-[tmc2209 extruder]
-uart_pin: PC14
-run_current: 0.550
-stealthchop_threshold: 0
-interpolate: False
-sense_resistor: 0.150
-uart_address: 3
-
-#####################################################################
-#   Bed Heater
-#####################################################################
-
-[heater_bed]
-heater_pin: PA2
-sensor_type: EPCOS 100K B57560G104F
-sensor_pin: PC4
-min_temp: 0
-max_temp: 110
-
-#####################################################################
-#   Probe Related
-#####################################################################
-
-[probe]
-pin: PB1
-x_offset: 27
-y_offset: -20
-# z_offset: 0
-samples: 3
-samples_result: median
-samples_tolerance: 0.01
-samples_tolerance_retries: 5
-
-[safe_z_home]
-home_xy_position: 84.50, 135 # NOTE The probe is at the center of the bed.
-speed: 100.0
-z_hop: 10
-z_hop_speed: 15
-
-[bed_mesh]
-speed: 175
-mesh_min: 27, 6 # probe as close to origin as possible while remaining fully on the bed
-mesh_max: 222, 203 # (x.position_max - 1), (y.position_max - abs(y_offset)) ; probe as far as possible from the origin while remaining fully on the bed
-probe_count: 5,5
-algorithm: bicubic
-fade_start: 1
-fade_end: 10
-fade_target: 0
-
-[axis_twist_compensation]
-calibrate_start_x: 27 # probe x coor at furthest left ; abs(x_offset)
-calibrate_end_x: 195 # probe x coor at furthest right ; (x.position_max - abs(x_offset) - 1)
-calibrate_y: 115
-
-#####################################################################
-#   Fans
-#####################################################################
-
-[fan]
-pin: PA0
-
-#####################################################################
-#   Misc
-#####################################################################
-
-[display]
-lcd_type: st7920
-cs_pin: PB12
-sclk_pin: PB13
-sid_pin: PB15
-encoder_pins: ^PB14, ^PB10
-click_pin: ^!PB2
-
-[input_shaper]
-# try X: mzv 54.6 
-shaper_type_x = 2hump_ei # mzv
-shaper_freq_x = 76.2     # 50.4
-shaper_type_y = mzv      # mzv
-shaper_freq_y = 40.4     # 41.4
-
-[bed_screws]
-screw1_name: front left
-screw1: 26.5, 31
-screw2_name: front right
-screw2: 196.75, 31
-screw3_name: back right
-screw3: 196.75, 201
-screw4_name: back left
-screw4: 26.5, 201
-
-[screws_tilt_adjust]
-screw1_name: center
-screw1: 84.50, 135
-screw2_name: front left
-screw2: 0, 51
-screw3_name: front right
-screw3: 169.75, 51
-screw4_name: back right
-screw4: 169.75, 221
-screw5_name: back left
-screw5: 0, 221
-horizontal_move_z: 10
-screw_thread: CCW-M4
-
-[output_pin beeper]
-pin: PC6
-value: 0
-shutdown_value: 0
-pwm: True
-cycle_time: 0.0005 ; Default beeper tone in kHz. 1 / 0.0005 = 2000Hz (2kHz)
-
-[filament_switch_sensor filament_sensor]
-switch_pin: !PA4 # "Pulled-high"
-pause_on_runout: True
-insert_gcode:
-    M117 Insert Detected
-    { action_respond_info("Insert Detected") }
-runout_gcode:
-    M117 Runout Detected
-    { action_respond_info("Runout Detected") }
-    CONDITIONAL_BEEP i=3 dur=300 freq=400
-
-#*# <---------------------- SAVE_CONFIG ---------------------->
-#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
-#*#
-#*# [extruder]
-#*# control = pid
-#*# pid_kp = 29.273
-#*# pid_ki = 3.049
-#*# pid_kd = 70.256
-#*#
-#*# [heater_bed]
-#*# control = pid
-#*# pid_kp = 67.629
-#*# pid_ki = 1.338
-#*# pid_kd = 854.657
-#*#
-#*# [probe]
-#*# z_offset = 1.300
-#*#
-#*# [axis_twist_compensation]
-#*# z_compensations = 0.086615, -0.020885, -0.065729
-#*# compensation_start_x = 27.0
-#*# compensation_end_x = 195.0
-#*#
-#*# [bed_mesh default-1]
-#*# version = 1
-#*# points =
-#*# 	0.038482, 0.061556, 0.047131, 0.009098, -0.055469
-#*# 	-0.033862, 0.002963, 0.008381, -0.014808, -0.099375
-#*# 	-0.095737, -0.047819, -0.040213, -0.062620, -0.132031
-#*# 	-0.102768, -0.048131, -0.042088, -0.064808, -0.124688
-#*# 	-0.036206, 0.030931, 0.037131, 0.011598, -0.052656
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 6.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = lagrange
-#*# tension = 0.2
-#*#
-#*# [bed_mesh default-0]
-#*# version = 1
-#*# points =
-#*# 	0.037145, 0.055020, 0.034770, -0.006886, -0.072291
-#*# 	-0.035980, -0.003730, 0.000395, -0.026104, -0.109323
-#*# 	-0.095512, -0.047480, -0.047261, -0.073292, -0.135573
-#*# 	-0.091918, -0.042793, -0.043824, -0.073136, -0.132760
-#*# 	-0.026449, 0.032520, 0.031801, -0.001886, -0.079010
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 6.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = lagrange
-#*# tension = 0.2
-#*#
-#*# [bed_mesh default]
-#*# version = 1
-#*# points =
-#*# 	  0.029919, 0.051593, 0.042329, -0.005485, -0.076198
-#*# 	  -0.035550, 0.010968, 0.015923, -0.012203, -0.101979
-#*# 	  -0.095706, -0.038564, -0.032827, -0.059860, -0.134323
-#*# 	  -0.098988, -0.036220, -0.031733, -0.060641, -0.127292
-#*# 	  -0.035238, 0.039718, 0.042954, 0.004047, -0.067135
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = lagrange
-#*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 6.0
-#*# max_y = 203.0

timelapse.cfg

@@ -1 +0,0 @@
-/home/pi/moonraker-timelapse/klipper_macro/timelapse.cfg