267 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Bassam Husain	7112c53ad8	Print_start adjusted: prints will start as long as current bed temp is not higher than 10C compared to sliced bed temp.	2023-05-10 01:43:37 -04:00
Bassam Husain	f0602b5cb2	Print_start adjusted: added back 0 bed temp possibility.	2023-05-10 01:23:35 -04:00
Bassam Husain	5242dc7276	Print_start adjusted: prints should now start even if bed temp is higher than what was set in slicer; does set sliced temp at the end though.	2023-05-10 01:11:58 -04:00
Bassam Husain	05dba3939e	Adjusted PRINT_START bedtempAlmost logic.	2023-05-09 17:20:30 -04:00
Bassam Husain	4dcd5e3840	Adjusted mcu section.	2023-05-03 15:26:28 -04:00
Bassam Husain	1cdcb4934b	PRINT_START adjust: don't cooldown if not necessary.	2023-04-22 07:10:06 -04:00
Bassam Husain	498e0d4a4d	PRINT_START bedtemp fix, 2nd try.	2023-04-20 16:56:25 -04:00
Bassam Husain	9b712df594	PRINT_START bedtemp fix.	2023-04-20 16:43:43 -04:00
Bassam Husain	e888ac0882	Added orange pi temp section.	2023-04-20 12:37:03 -04:00
Bassam Husain	89fbb10154	variable_pre_purge_prime_length reverted.	2023-04-20 12:10:00 -04:00
Bassam Husain	6eb152e58d	Adjust PRINT_START: safe_z_home startX, startY.	2023-04-19 10:53:08 -04:00
Bassam Husain	c1672c9a42	Fixed sense_resistor according to specs.	2023-04-19 07:47:24 -04:00
Bassam Husain	2e5764f295	Adjusted print_start start x, y positions conditionally.	2023-04-18 10:39:22 -04:00
Bassam Husain	7e5aeb6654	Print_start adjusted.	2023-04-17 02:13:19 -04:00
Bassam Husain	f5d3499da7	Getting safe_z_home info in print_start.	2023-04-17 01:02:20 -04:00
Bassam Husain	2c8a4e5aa0	Print_start improvements.	2023-04-17 00:55:51 -04:00
Bassam Husain	b8d246762f	Added print_start heating.	2023-04-14 07:39:46 -04:00
Bassam Husain	9fc09eef43	Added more steps to heating in print_start.	2023-04-13 19:48:11 -04:00
Bassam Husain	02eb713930	Added more steps to heating in print_start.	2023-04-13 18:06:36 -04:00
Bassam Husain	f0729bfc2e	New z_offset.	2023-04-11 15:54:19 -04:00
Bassam Husain	9352cbc3d0	New z_offset.	2023-04-09 15:21:18 -04:00
Bassam Husain	0ce30e2d23	Manual mesh edit; center; b11.	2023-04-09 12:06:06 -04:00
Bassam Husain	bc612db077	Manual bed mesh edit b10.	2023-04-09 10:50:23 -04:00
Bassam Husain	ef774efde3	Manual bed mesh edit b9.	2023-04-09 10:17:54 -04:00
Bassam Husain	44a1db591b	Set microsteps to 128; MCU can't handle generate those microsteps in all conditions.	2023-04-08 21:21:38 -04:00
Bassam Husain	d53a6d822a	Adjusted PRINT_START: travel speeds.	2023-04-06 09:31:15 -04:00
Bassam Husain	3f06eebe42	Adjusted PRINT_START temperature heating sequence.	2023-04-06 09:16:18 -04:00
Bassam Husain	85b2ca15e8	Set microsteps to 256.	2023-04-06 08:28:35 -04:00
Bassam Husain	857a8fdd3b	New shaper x.	2023-04-03 05:26:46 -04:00
Bassam Husain	e2ec5b8d49	Added image to readme in personal branch.	2023-04-02 22:56:54 -04:00
Bassam Husain	f9832b60c3	Adjusted print_start to start heating first, then home x and y.	2023-04-02 20:38:14 -04:00
Bassam Husain	3b59b534c9	Adjust max accel and velocity.	2023-04-02 20:11:15 -04:00
Bassam Husain	1805a999b1	Adjusted start position for purge_line.	2023-04-02 18:47:41 -04:00
Bassam Husain	a19df40bed	Adjusted stepper_x.run_current: 0.900.	2023-03-31 19:31:45 -04:00
Bassam Husain	57f4aa303f	Merge branch 'temp-ms-good-mesh-edited' into personal	2023-03-30 08:27:31 -04:00
Bassam Husain	2ad0456132	Adjusted mesh manually. Increase currents x and y.	2023-03-30 07:55:38 -04:00
Bassam Husain	64825fda41	New edited mesh, mostly good. New z_offset.	2023-03-30 07:39:40 -04:00
Bassam Husain	5ba208b674	Adjusted mesh manually.	2023-03-30 05:51:42 -04:00
Bassam Husain	baa31179a3	Adjusted mesh manually.	2023-03-29 20:08:11 -04:00
Bassam Husain	6dafba0ab8	Adjusted mesh manually.	2023-03-29 02:04:09 -04:00
Bassam Husain	837f6d1e19	Adjusted mesh manually.	2023-03-29 02:00:38 -04:00
Bassam Husain	efddacb0cb	Merge branch 'personal' into temp-ms-good-mesh-edited	2023-03-29 01:23:20 -04:00
Bassam Husain	40c32cab69	Adjusted readme for personal branch.	2023-03-27 23:27:52 -04:00
Bassam Husain	ad78f3f759	Merge branch 'purge' into personal	2023-03-27 17:02:55 -04:00
Bassam Husain	d227fcb58f	Re-added temperature_wait.	2023-03-27 16:57:42 -04:00
Bassam Husain	d08bbb7f23	Adjust purge_line.	2023-03-27 16:50:43 -04:00
Bassam Husain	c462eb819c	Adjust purge_line.	2023-03-26 15:04:35 -04:00
Bassam Husain	4528151bc1	Adjusted print_end to fix speed calculation error.	2023-03-26 14:35:04 -04:00
Bassam Husain	aff79ff8de	Merge remote-tracking branch 'origin/temp-ms' into personal	2023-03-26 14:24:43 -04:00
Bassam Husain	f12e2f3382	Adjusted print_end to use speeds pulled from config.	2023-03-26 14:16:24 -04:00