Adjust PS config bundle.

misc/PrusaSlicer_config_bundle-SV06-Both.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 22:47:24 UTC
+# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 23:37:05 UTC
 
 [print:0.20mm QUALITY SV06 Ellis]
 avoid_crossing_curled_overhangs = 0
@@ -2416,7 +2416,7 @@ slowdown_below_layer_time = 15
 start_filament_gcode = "; Filament gcode\n"
 temperature = 210
 
-[printer:Sovol Sv06]
+[printer:Sovol SV06]
 autoemit_temperature_commands = 1
 bed_custom_model = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
 bed_custom_texture = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
@@ -2497,11 +2497,106 @@ variable_layer_height = 1
 wipe = 0
 z_offset = 0
 
-[physical_printer:Sv06]
+[printer:Sovol SV06 Plus]
+autoemit_temperature_commands = 1
+bed_custom_model = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
+bed_custom_texture = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Prusament PLA"
+default_print_profile = 0.15mm QUALITY @MK3
+deretract_speed = 40
+end_gcode = PRINT_END
+extra_loading_move = -2
+extruder_colour = #FFE3CA
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
 host_type = octoprint
-preset_name = Sovol Sv06
-preset_names = "Sovol Sv06"
-print_host = http://10.0.0.51/
+inherits = 
+layer_gcode = 
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 340
+min_layer_height = 0.04
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = PAUSE
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = Sovol Sv06
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0.2
+retract_lift_below = 250
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")
+template_custom_gcode = 
+thumbnails = 32x32,400x300
+thumbnails_format = PNG
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
+[physical_printer:Local SV06]
+host_type = octoprint
+preset_name = Sovol SV06
+preset_names = "Sovol SV06"
+print_host = http://10.0.0.51
+printer_technology = FFF
+printhost_apikey = 
+printhost_authorization_type = key
+printhost_cafile = 
+printhost_password = 
+printhost_port = 
+printhost_ssl_ignore_revoke = 0
+printhost_user = 
+
+[physical_printer:Local SV06 Plus]
+host_type = octoprint
+preset_name = Sovol SV06 Plus
+preset_names = "Sovol SV06 Plus"
+print_host = http://10.0.0.51
 printer_technology = FFF
 printhost_apikey = 
 printhost_authorization_type = key
@@ -2515,6 +2610,6 @@ printhost_user =
 print = Ellis_Decorative_Standard_15mm3
 sla_print = 
 sla_material = 
-printer = Sovol Sv06
+printer = Sovol SV06
 filament = eSun PLA+ Blue
-physical_printer = Sv06
+physical_printer =