Adjust SS config bundle.

misc/SuperSlicer_config_bundle-SV06-Both.ini

@@ -1,4 +1,4 @@
-# generated by SuperSlicer 2.4 on 2023-08-23 at 23:21:10 UTC
+# generated by SuperSlicer 2.4 on 2023-08-23 at 23:28:35 UTC
 
 [print:Ellis_Decorative_45_Degree_15mm3]
 allow_empty_layers = 0
@@ -3740,6 +3740,131 @@ wipe_speed = 0
 z_offset = 0
 z_step = 0.005
 
+[printer:Sovol Sv06 Plus]
+bed_custom_model = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
+bed_custom_texture = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Prusament PLA"
+default_print_profile = 0.15mm QUALITY @MK3
+deretract_speed = 40
+end_gcode = PRINT_END
+extra_loading_move = -2
+extruder_colour = #FFE3CA
+extruder_fan_offset = 0%
+extruder_offset = 0x0
+extruder_temperature_offset = 0
+fan_kickstart = 0
+fan_percentage = 0
+fan_speedup_overhangs = 1
+fan_speedup_time = 0
+feature_gcode = 
+gcode_filename_illegal_char = [<>:"/\\\\|?*]
+gcode_flavor = klipper
+gcode_precision_e = 5
+gcode_precision_xyz = 3
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+init_z_rotate = 0
+layer_gcode = 
+lift_min = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_gcode_per_second = 1500
+max_layer_height = 75%
+max_print_height = 340
+milling_diameter = 
+milling_toolchange_end_gcode = 
+milling_toolchange_start_gcode = 
+milling_z_lift = 
+min_layer_height = 0.04
+min_length = 0.035
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = PAUSE
+print_host = 
+printer_custom_variables = 
+printer_model = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+printer_settings_id = Sovol Sv06
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+printhost_port = 
+remaining_times = 1
+remaining_times_type = m73
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0.2
+retract_lift_below = 250
+retract_lift_first_layer = 0
+retract_lift_top = "All surfaces"
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+seam_gap = 15%
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n
+start_gcode_manual = 0
+template_custom_gcode = 
+thumbnails = 32x32,400x300
+thumbnails_color = #00FF00
+thumbnails_custom_color = 1
+thumbnails_end_file = 0
+thumbnails_format = PNG
+thumbnails_with_bed = 1
+time_cost = 0
+time_estimation_compensation = 100%
+time_start_gcode = 20
+time_toolchange = 30
+tool_name = ""
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+wipe_advanced = 0
+wipe_advanced_algo = linear
+wipe_advanced_multiplier = 60
+wipe_advanced_nozzle_melted_volume = 120
+wipe_extra_perimeter = 0
+wipe_inside_depth = 50%
+wipe_inside_end = 1
+wipe_inside_start = 0
+wipe_only_crossing = 1
+wipe_speed = 0
+z_offset = 0
+z_step = 0.005
+
 [physical_printer:Local]
 host_type = octoprint
 preset_name = Sovol Sv06
@@ -3755,10 +3880,25 @@ printhost_port =
 printhost_ssl_ignore_revoke = 0
 printhost_user = 
 
+[physical_printer:Local Plus]
+host_type = octoprint
+preset_name = Sovol Sv06 Plus
+preset_names = "Sovol Sv06 Plus"
+print_host = http://10.0.0.51
+printer_technology = FFF
+printhost_apikey = 
+printhost_authorization_type = key
+printhost_cafile = 
+printhost_client_cert = 
+printhost_password = 
+printhost_port = 
+printhost_ssl_ignore_revoke = 0
+printhost_user = 
+
 [presets]
 print = Ellis_Decorative_Standard_15mm3
 sla_print = 
 sla_material = 
 printer = Sovol Sv06
 filament = eSun PLA+ Blue
-physical_printer = Local
+physical_printer =