From d22f68c6a1d76cd2dbdf4466a28e962fa0afdfcb Mon Sep 17 00:00:00 2001 From: Bassam Husain Date: Wed, 23 Aug 2023 19:31:04 -0400 Subject: [PATCH] Adjust SS config bundle. --- ...> SuperSlicer_config_bundle-SV06-Both.ini} | 144 +++++++++++++++++- 1 file changed, 142 insertions(+), 2 deletions(-) rename misc/{SuperSlicer_config_bundle-SV06.ini => SuperSlicer_config_bundle-SV06-Both.ini} (95%) diff --git a/misc/SuperSlicer_config_bundle-SV06.ini b/misc/SuperSlicer_config_bundle-SV06-Both.ini similarity index 95% rename from misc/SuperSlicer_config_bundle-SV06.ini rename to misc/SuperSlicer_config_bundle-SV06-Both.ini index c2e7364..717e60a 100644 --- a/misc/SuperSlicer_config_bundle-SV06.ini +++ b/misc/SuperSlicer_config_bundle-SV06-Both.ini @@ -1,4 +1,4 @@ -# generated by SuperSlicer 2.4 on 2023-08-23 at 23:21:10 UTC +# generated by SuperSlicer 2.4 on 2023-08-23 at 23:28:35 UTC [print:Ellis_Decorative_45_Degree_15mm3] allow_empty_layers = 0 @@ -3740,6 +3740,131 @@ wipe_speed = 0 z_offset = 0 z_step = 0.005 +[printer:Sovol Sv06 Plus] +bed_custom_model = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl +bed_custom_texture = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png +bed_shape = 0x0,300x0,300x300,0x300 +before_layer_gcode = +between_objects_gcode = +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "Prusament PLA" +default_print_profile = 0.15mm QUALITY @MK3 +deretract_speed = 40 +end_gcode = PRINT_END +extra_loading_move = -2 +extruder_colour = #FFE3CA +extruder_fan_offset = 0% +extruder_offset = 0x0 +extruder_temperature_offset = 0 +fan_kickstart = 0 +fan_percentage = 0 +fan_speedup_overhangs = 1 +fan_speedup_time = 0 +feature_gcode = +gcode_filename_illegal_char = [<>:"/\\\\|?*] +gcode_flavor = klipper +gcode_precision_e = 5 +gcode_precision_xyz = 3 +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = +init_z_rotate = 0 +layer_gcode = +lift_min = 0 +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1000,960 +machine_max_acceleration_y = 1000,960 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,100 +machine_max_feedrate_y = 200,100 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 4.5,4.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_gcode_per_second = 1500 +max_layer_height = 75% +max_print_height = 340 +milling_diameter = +milling_toolchange_end_gcode = +milling_toolchange_start_gcode = +milling_z_lift = +min_layer_height = 0.04 +min_length = 0.035 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = PAUSE +print_host = +printer_custom_variables = +printer_model = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = Sovol Sv06 +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +printhost_port = +remaining_times = 1 +remaining_times_type = m73 +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.5 +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0.2 +retract_lift_below = 250 +retract_lift_first_layer = 0 +retract_lift_top = "All surfaces" +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +seam_gap = 15% +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n +start_gcode_manual = 0 +template_custom_gcode = +thumbnails = 32x32,400x300 +thumbnails_color = #00FF00 +thumbnails_custom_color = 1 +thumbnails_end_file = 0 +thumbnails_format = PNG +thumbnails_with_bed = 1 +time_cost = 0 +time_estimation_compensation = 100% +time_start_gcode = 20 +time_toolchange = 30 +tool_name = "" +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0 +wipe_advanced = 0 +wipe_advanced_algo = linear +wipe_advanced_multiplier = 60 +wipe_advanced_nozzle_melted_volume = 120 +wipe_extra_perimeter = 0 +wipe_inside_depth = 50% +wipe_inside_end = 1 +wipe_inside_start = 0 +wipe_only_crossing = 1 +wipe_speed = 0 +z_offset = 0 +z_step = 0.005 + [physical_printer:Local] host_type = octoprint preset_name = Sovol Sv06 @@ -3755,10 +3880,25 @@ printhost_port = printhost_ssl_ignore_revoke = 0 printhost_user = +[physical_printer:Local Plus] +host_type = octoprint +preset_name = Sovol Sv06 Plus +preset_names = "Sovol Sv06 Plus" +print_host = http://10.0.0.51 +printer_technology = FFF +printhost_apikey = +printhost_authorization_type = key +printhost_cafile = +printhost_client_cert = +printhost_password = +printhost_port = +printhost_ssl_ignore_revoke = 0 +printhost_user = + [presets] print = Ellis_Decorative_Standard_15mm3 sla_print = sla_material = printer = Sovol Sv06 filament = eSun PLA+ Blue -physical_printer = Local +physical_printer =