mirror of
https://github.com/caperren/school_archives.git
synced 2025-11-09 21:51:15 +00:00
624 lines
17 KiB
C
624 lines
17 KiB
C
/*-----------------------------------------------------------------------*/
|
|
/* MMCv3/SDv1/SDv2 (in SPI mode) control module (C)ChaN, 2007 */
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Only rcvr_spi(), xmit_spi(), disk_timerproc() and some macros */
|
|
/* are platform dependent. */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
#include "diskio.h"
|
|
|
|
|
|
/* Definitions for MMC/SDC command */
|
|
#define CMD0 (0) /* GO_IDLE_STATE */
|
|
#define CMD1 (1) /* SEND_OP_COND (MMC) */
|
|
#define ACMD41 (0x80+41) /* SEND_OP_COND (SDC) */
|
|
#define CMD8 (8) /* SEND_IF_COND */
|
|
#define CMD9 (9) /* SEND_CSD */
|
|
#define CMD10 (10) /* SEND_CID */
|
|
#define CMD12 (12) /* STOP_TRANSMISSION */
|
|
#define ACMD13 (0x80+13) /* SD_STATUS (SDC) */
|
|
#define CMD16 (16) /* SET_BLOCKLEN */
|
|
#define CMD17 (17) /* READ_SINGLE_BLOCK */
|
|
#define CMD18 (18) /* READ_MULTIPLE_BLOCK */
|
|
#define CMD23 (23) /* SET_BLOCK_COUNT (MMC) */
|
|
#define ACMD23 (0x80+23) /* SET_WR_BLK_ERASE_COUNT (SDC) */
|
|
#define CMD24 (24) /* WRITE_BLOCK */
|
|
#define CMD25 (25) /* WRITE_MULTIPLE_BLOCK */
|
|
#define CMD55 (55) /* APP_CMD */
|
|
#define CMD58 (58) /* READ_OCR */
|
|
|
|
|
|
/* Port Controls (Platform dependent) */
|
|
#define CS_LOW() PORTB &= ~1 /* MMC CS = L */
|
|
#define CS_HIGH() PORTB |= 1 /* MMC CS = H */
|
|
|
|
#define SOCKPORT PINB /* Socket contact port */
|
|
#define SOCKWP 0x20 /* Write protect switch (PB5) */
|
|
#define SOCKINS 0x10 /* Card detect switch (PB4) */
|
|
|
|
#define FCLK_SLOW() SPCR = 0x52 /* Set slow clock (100k-400k) */
|
|
#define FCLK_FAST() SPCR = 0x50 /* Set fast clock (depends on the CSD) */
|
|
|
|
|
|
/*--------------------------------------------------------------------------
|
|
|
|
Module Private Functions
|
|
|
|
---------------------------------------------------------------------------*/
|
|
|
|
static volatile
|
|
DSTATUS Stat = STA_NOINIT; /* Disk status */
|
|
|
|
static volatile
|
|
BYTE Timer1, Timer2; /* 100Hz decrement timer */
|
|
|
|
static
|
|
BYTE CardType; /* Card type flags */
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Transmit a byte to MMC via SPI (Platform dependent) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#define xmit_spi(dat) cli(); SPDR=(dat); loop_until_bit_is_set(SPSR,SPIF); sei()
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Receive a byte from MMC via SPI (Platform dependent) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
BYTE rcvr_spi (void)
|
|
{
|
|
cli();
|
|
SPDR = 0xFF;
|
|
loop_until_bit_is_set(SPSR, SPIF);
|
|
sei();
|
|
return SPDR;
|
|
}
|
|
|
|
/* Alternative macro to receive data fast */
|
|
#define rcvr_spi_m(dst) SPDR=0xFF; loop_until_bit_is_set(SPSR,SPIF); *(dst)=SPDR
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Wait for card ready */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
int wait_ready (void) /* 1:OK, 0:Timeout */
|
|
{
|
|
Timer2 = 50; /* Wait for ready in timeout of 500ms */
|
|
rcvr_spi();
|
|
do
|
|
if (rcvr_spi() == 0xFF) return 1;
|
|
while (Timer2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Deselect the card and release SPI bus */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
void deselect (void)
|
|
{
|
|
CS_HIGH();
|
|
rcvr_spi();
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Select the card and wait for ready */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
int select (void) /* 1:Successful, 0:Timeout */
|
|
{
|
|
CS_LOW();
|
|
if (!wait_ready()) {
|
|
deselect();
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Power Control (Platform dependent) */
|
|
/*-----------------------------------------------------------------------*/
|
|
/* When the target system does not support socket power control, there */
|
|
/* is nothing to do in these functions and chk_power always returns 1. */
|
|
|
|
/*
|
|
static
|
|
void power_on (void)
|
|
{
|
|
PORTE &= ~0x80; // Socket power ON *
|
|
for (Timer1 = 3; Timer1; ); // Wait for 30ms *
|
|
PORTB = 0b10110101; //Enable drivers *
|
|
DDRB = 0b11000111;
|
|
SPCR = 0x52; // Enable SPI function in mode 0 *
|
|
SPSR = 0x01; // 2x mode *
|
|
}
|
|
|
|
|
|
static
|
|
void power_off (void)
|
|
{
|
|
select(); // Wait for card ready *
|
|
deselect();
|
|
SPCR = 0; // Disable SPI function *
|
|
DDRB = 0b11000000; // Disable drivers *
|
|
PORTB = 0b10110000;
|
|
PORTE |= 0x80; // Socket power OFF *
|
|
Stat |= STA_NOINIT; // Set STA_NOINIT *
|
|
}
|
|
*/
|
|
|
|
static
|
|
int chk_power(void) /* Socket power state: 0=off, 1=on */
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Receive a data packet from MMC */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
int rcvr_datablock (
|
|
BYTE *buff, /* Data buffer to store received data */
|
|
UINT btr /* Byte count (must be multiple of 4) */
|
|
)
|
|
{
|
|
BYTE token;
|
|
|
|
|
|
Timer1 = 20;
|
|
do { /* Wait for data packet in timeout of 200ms */
|
|
token = rcvr_spi();
|
|
} while ((token == 0xFF) && Timer1);
|
|
if(token != 0xFE) return 0; /* If not valid data token, retutn with error */
|
|
|
|
do { /* Receive the data block into buffer */
|
|
rcvr_spi_m(buff++);
|
|
rcvr_spi_m(buff++);
|
|
rcvr_spi_m(buff++);
|
|
rcvr_spi_m(buff++);
|
|
} while (btr -= 4);
|
|
rcvr_spi(); /* Discard CRC */
|
|
rcvr_spi();
|
|
|
|
return 1; /* Return with success */
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Send a data packet to MMC */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#if _READONLY == 0
|
|
static
|
|
int xmit_datablock (
|
|
const BYTE *buff, /* 512 byte data block to be transmitted */
|
|
BYTE token /* Data/Stop token */
|
|
)
|
|
{
|
|
BYTE resp, wc;
|
|
|
|
|
|
if (!wait_ready()) return 0;
|
|
|
|
xmit_spi(token); /* Xmit data token */
|
|
if (token != 0xFD) { /* Is data token */
|
|
wc = 0;
|
|
do { /* Xmit the 512 byte data block to MMC */
|
|
xmit_spi(*buff++);
|
|
xmit_spi(*buff++);
|
|
} while (--wc);
|
|
xmit_spi(0xFF); /* CRC (Dummy) */
|
|
xmit_spi(0xFF);
|
|
resp = rcvr_spi(); /* Reveive data response */
|
|
if ((resp & 0x1F) != 0x05) /* If not accepted, return with error */
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif /* _READONLY */
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Send a command packet to MMC */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
BYTE send_cmd ( /* Returns R1 resp (bit7==1:Send failed) */
|
|
BYTE cmd, /* Command index */
|
|
DWORD arg /* Argument */
|
|
)
|
|
{
|
|
BYTE n, res;
|
|
|
|
|
|
if (cmd & 0x80) { /* ACMD<n> is the command sequense of CMD55-CMD<n> */
|
|
cmd &= 0x7F;
|
|
res = send_cmd(CMD55, 0);
|
|
if (res > 1) return res;
|
|
}
|
|
|
|
/* Select the card and wait for ready */
|
|
deselect();
|
|
if (!select()) return 0xFF;
|
|
|
|
/* Send command packet */
|
|
xmit_spi(0x40 | cmd); /* Start + Command index */
|
|
xmit_spi((BYTE)(arg >> 24)); /* Argument[31..24] */
|
|
xmit_spi((BYTE)(arg >> 16)); /* Argument[23..16] */
|
|
xmit_spi((BYTE)(arg >> 8)); /* Argument[15..8] */
|
|
xmit_spi((BYTE)arg); /* Argument[7..0] */
|
|
n = 0x01; /* Dummy CRC + Stop */
|
|
if (cmd == CMD0) n = 0x95; /* Valid CRC for CMD0(0) */
|
|
if (cmd == CMD8) n = 0x87; /* Valid CRC for CMD8(0x1AA) */
|
|
xmit_spi(n);
|
|
|
|
/* Receive command response */
|
|
if (cmd == CMD12) rcvr_spi(); /* Skip a stuff byte when stop reading */
|
|
n = 10; /* Wait for a valid response in timeout of 10 attempts */
|
|
do
|
|
res = rcvr_spi();
|
|
while ((res & 0x80) && --n);
|
|
|
|
return res; /* Return with the response value */
|
|
}
|
|
|
|
|
|
|
|
/*--------------------------------------------------------------------------
|
|
|
|
Public Functions
|
|
|
|
---------------------------------------------------------------------------*/
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Initialize Disk Drive */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
DSTATUS disk_initialize (BYTE drv) /* Physical drive nmuber (0) */
|
|
{
|
|
BYTE n, cmd, ty, ocr[4];
|
|
|
|
if (drv) return STA_NOINIT; /* Supports only single drive */
|
|
if (Stat & STA_NODISK) return Stat; /* No card in the socket */
|
|
|
|
//power_on(); /* Force socket power on */
|
|
PORTB |= 0b11000000;
|
|
FCLK_SLOW();
|
|
for (n = 10; n; n--) rcvr_spi(); /* 80 dummy clocks */
|
|
|
|
ty = 0;
|
|
if (send_cmd(CMD0, 0) == 1) { /* Enter Idle state */
|
|
Timer1 = 200; /* Initialization timeout of 1000 msec */
|
|
if (send_cmd(CMD8, 0x1AA) == 1) { /* SDv2? */
|
|
for (n = 0; n < 4; n++) ocr[n] = rcvr_spi(); /* Get trailing return value of R7 resp */
|
|
if (ocr[2] == 0x01 && ocr[3] == 0xAA) { /* The card can work at vdd range of 2.7-3.6V */
|
|
while (Timer1 && send_cmd(ACMD41, 1UL << 30)); /* Wait for leaving idle state (ACMD41 with HCS bit) */
|
|
if (Timer1 && send_cmd(CMD58, 0) == 0) { /* Check CCS bit in the OCR */
|
|
for (n = 0; n < 4; n++) ocr[n] = rcvr_spi();
|
|
ty = (ocr[0] & 0x40) ? CT_SD2 | CT_BLOCK : CT_SD2; /* SDv2 */
|
|
}
|
|
}
|
|
} else { /* SDv1 or MMCv3 */
|
|
if (send_cmd(ACMD41, 0) <= 1) {
|
|
ty = CT_SD1; cmd = ACMD41; /* SDv1 */
|
|
} else {
|
|
ty = CT_MMC; cmd = CMD1; /* MMCv3 */
|
|
}
|
|
while (Timer1 && send_cmd(cmd, 0)); /* Wait for leaving idle state */
|
|
if (!Timer1 || send_cmd(CMD16, 512) != 0) /* Set R/W block length to 512 */
|
|
ty = 0;
|
|
}
|
|
}
|
|
|
|
CardType = ty;
|
|
deselect();
|
|
|
|
if (ty) { /* Initialization succeded */
|
|
Stat &= ~STA_NOINIT; /* Clear STA_NOINIT */
|
|
FCLK_FAST();
|
|
} else { /* Initialization failed */
|
|
//power_off();
|
|
|
|
}
|
|
|
|
return Stat;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Get Disk Status */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
DSTATUS disk_status (
|
|
BYTE drv /* Physical drive nmuber (0) */
|
|
)
|
|
{
|
|
if (drv) return STA_NOINIT; /* Supports only single drive */
|
|
return Stat;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Read Sector(s) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
DRESULT disk_read (
|
|
BYTE drv, /* Physical drive nmuber (0) */
|
|
BYTE *buff, /* Pointer to the data buffer to store read data */
|
|
DWORD sector, /* Start sector number (LBA) */
|
|
BYTE count /* Sector count (1..255) */
|
|
)
|
|
{
|
|
if (drv || !count) return RES_PARERR;
|
|
if (Stat & STA_NOINIT) return RES_NOTRDY;
|
|
|
|
if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */
|
|
|
|
if (count == 1) { /* Single block read */
|
|
if ((send_cmd(CMD17, sector) == 0) /* READ_SINGLE_BLOCK */
|
|
&& rcvr_datablock(buff, 512))
|
|
count = 0;
|
|
}
|
|
else { /* Multiple block read */
|
|
if (send_cmd(CMD18, sector) == 0) { /* READ_MULTIPLE_BLOCK */
|
|
do {
|
|
if (!rcvr_datablock(buff, 512)) break;
|
|
buff += 512;
|
|
} while (--count);
|
|
send_cmd(CMD12, 0); /* STOP_TRANSMISSION */
|
|
}
|
|
}
|
|
deselect();
|
|
|
|
return count ? RES_ERROR : RES_OK;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Write Sector(s) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#if _READONLY == 0
|
|
DRESULT disk_write (
|
|
BYTE drv, /* Physical drive nmuber (0) */
|
|
const BYTE *buff, /* Pointer to the data to be written */
|
|
DWORD sector, /* Start sector number (LBA) */
|
|
BYTE count /* Sector count (1..255) */
|
|
)
|
|
{
|
|
if (drv || !count) return RES_PARERR;
|
|
if (Stat & STA_NOINIT) return RES_NOTRDY;
|
|
if (Stat & STA_PROTECT) return RES_WRPRT;
|
|
|
|
if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */
|
|
|
|
if (count == 1) { /* Single block write */
|
|
if ((send_cmd(CMD24, sector) == 0) /* WRITE_BLOCK */
|
|
&& xmit_datablock(buff, 0xFE))
|
|
count = 0;
|
|
}
|
|
else { /* Multiple block write */
|
|
if (CardType & CT_SDC) send_cmd(ACMD23, count);
|
|
if (send_cmd(CMD25, sector) == 0) { /* WRITE_MULTIPLE_BLOCK */
|
|
do {
|
|
if (!xmit_datablock(buff, 0xFC)) break;
|
|
buff += 512;
|
|
} while (--count);
|
|
if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */
|
|
count = 1;
|
|
}
|
|
}
|
|
deselect();
|
|
|
|
return count ? RES_ERROR : RES_OK;
|
|
}
|
|
#endif /* _READONLY == 0 */
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Miscellaneous Functions */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#if _USE_IOCTL != 0
|
|
DRESULT disk_ioctl (
|
|
BYTE drv, /* Physical drive nmuber (0) */
|
|
BYTE ctrl, /* Control code */
|
|
void *buff /* Buffer to send/receive control data */
|
|
)
|
|
{
|
|
DRESULT res;
|
|
BYTE n, csd[16], *ptr = buff;
|
|
WORD csize;
|
|
|
|
|
|
if (drv) return RES_PARERR;
|
|
|
|
res = RES_ERROR;
|
|
|
|
if (ctrl == CTRL_POWER) {
|
|
switch (*ptr) {
|
|
case 0: /* Sub control code == 0 (POWER_OFF) */
|
|
if (chk_power())
|
|
//power_off(); // Power off */
|
|
res = RES_OK;
|
|
break;
|
|
case 1: /* Sub control code == 1 (POWER_ON) */
|
|
//power_on(); // Power on */
|
|
res = RES_OK;
|
|
break;
|
|
case 2: /* Sub control code == 2 (POWER_GET) */
|
|
*(ptr+1) = (BYTE)chk_power();
|
|
res = RES_OK;
|
|
break;
|
|
default :
|
|
res = RES_PARERR;
|
|
}
|
|
}
|
|
else {
|
|
if (Stat & STA_NOINIT) return RES_NOTRDY;
|
|
|
|
switch (ctrl) {
|
|
case CTRL_SYNC : /* Make sure that no pending write process. Do not remove this or written sector might not left updated. */
|
|
if (select()) {
|
|
deselect();
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
case GET_SECTOR_COUNT : /* Get number of sectors on the disk (DWORD) */
|
|
if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) {
|
|
if ((csd[0] >> 6) == 1) { /* SDC ver 2.00 */
|
|
csize = csd[9] + ((WORD)csd[8] << 8) + 1;
|
|
*(DWORD*)buff = (DWORD)csize << 10;
|
|
} else { /* SDC ver 1.XX or MMC*/
|
|
n = (csd[5] & 15) + ((csd[10] & 128) >> 7) + ((csd[9] & 3) << 1) + 2;
|
|
csize = (csd[8] >> 6) + ((WORD)csd[7] << 2) + ((WORD)(csd[6] & 3) << 10) + 1;
|
|
*(DWORD*)buff = (DWORD)csize << (n - 9);
|
|
}
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
case GET_SECTOR_SIZE : /* Get R/W sector size (WORD) */
|
|
*(WORD*)buff = 512;
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case GET_BLOCK_SIZE : /* Get erase block size in unit of sector (DWORD) */
|
|
if (CardType & CT_SD2) { /* SDv2? */
|
|
if (send_cmd(ACMD13, 0) == 0) { /* Read SD status */
|
|
rcvr_spi();
|
|
if (rcvr_datablock(csd, 16)) { /* Read partial block */
|
|
for (n = 64 - 16; n; n--) rcvr_spi(); /* Purge trailing data */
|
|
*(DWORD*)buff = 16UL << (csd[10] >> 4);
|
|
res = RES_OK;
|
|
}
|
|
}
|
|
} else { /* SDv1 or MMCv3 */
|
|
if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { /* Read CSD */
|
|
if (CardType & CT_SD1) { /* SDv1 */
|
|
*(DWORD*)buff = (((csd[10] & 63) << 1) + ((WORD)(csd[11] & 128) >> 7) + 1) << ((csd[13] >> 6) - 1);
|
|
} else { /* MMCv3 */
|
|
*(DWORD*)buff = ((WORD)((csd[10] & 124) >> 2) + 1) * (((csd[11] & 3) << 3) + ((csd[11] & 224) >> 5) + 1);
|
|
}
|
|
res = RES_OK;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case MMC_GET_TYPE : /* Get card type flags (1 byte) */
|
|
*ptr = CardType;
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case MMC_GET_CSD : /* Receive CSD as a data block (16 bytes) */
|
|
if (send_cmd(CMD9, 0) == 0 /* READ_CSD */
|
|
&& rcvr_datablock(ptr, 16))
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case MMC_GET_CID : /* Receive CID as a data block (16 bytes) */
|
|
if (send_cmd(CMD10, 0) == 0 /* READ_CID */
|
|
&& rcvr_datablock(ptr, 16))
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case MMC_GET_OCR : /* Receive OCR as an R3 resp (4 bytes) */
|
|
if (send_cmd(CMD58, 0) == 0) { /* READ_OCR */
|
|
for (n = 4; n; n--) *ptr++ = rcvr_spi();
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
case MMC_GET_SDSTAT : /* Receive SD statsu as a data block (64 bytes) */
|
|
if (send_cmd(ACMD13, 0) == 0) { /* SD_STATUS */
|
|
rcvr_spi();
|
|
if (rcvr_datablock(ptr, 64))
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
res = RES_PARERR;
|
|
}
|
|
|
|
deselect();
|
|
}
|
|
|
|
return res;
|
|
}
|
|
#endif /* _USE_IOCTL != 0 */
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Device Timer Interrupt Procedure (Platform dependent) */
|
|
/*-----------------------------------------------------------------------*/
|
|
/* This function must be called in period of 10ms */
|
|
|
|
void disk_timerproc (void)
|
|
{
|
|
static BYTE pv;
|
|
BYTE n, s;
|
|
|
|
|
|
n = Timer1; /* 100Hz decrement timer */
|
|
if (n) Timer1 = --n;
|
|
n = Timer2;
|
|
if (n) Timer2 = --n;
|
|
|
|
n = pv;
|
|
pv = SOCKPORT & (SOCKWP | SOCKINS); /* Sample socket switch */
|
|
|
|
if (n == pv) { /* Have contacts stabled? */
|
|
s = Stat;
|
|
|
|
if (pv & SOCKWP) /* WP is H (write protected) */
|
|
s |= STA_PROTECT;
|
|
else /* WP is L (write enabled) */
|
|
s &= ~STA_PROTECT;
|
|
|
|
if (pv & SOCKINS) /* INS = H (Socket empty) */
|
|
s |= (STA_NODISK | STA_NOINIT);
|
|
else /* INS = L (Card inserted) */
|
|
s &= ~STA_NODISK;
|
|
|
|
Stat = s;
|
|
}
|
|
}
|
|
|
|
DWORD get_fattime ()
|
|
{
|
|
return 0;
|
|
}
|
|
|