mirror of
https://github.com/bassamanator/Sovol-SV06-firmware.git
synced 2025-11-08 13:31:16 +00:00
278 lines
13 KiB
INI
278 lines
13 KiB
INI
[pause_resume]
|
|
[display_status]
|
|
|
|
[gcode_macro PURGE_LINE]
|
|
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
|
|
gcode:
|
|
G0 Y0 X40 F4000 ; go to tongue of print bed
|
|
G1 Z0.2 F500.0 ; move bed to nozzle
|
|
G92 E0.0 ; reset extruder
|
|
G1 E1.40 F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
|
|
G1 X80 E8.0 F500.0 ; intro line 1
|
|
G1 Y0.3 ; move in a little
|
|
G1 X40 E8.0 F500.0 ; second line
|
|
G92 E0.0 ; reset extruder
|
|
G1 Z2.0 ; move nozzle to prevent scratch
|
|
|
|
# [gcode_macro CANCEL_PRINT]
|
|
# description: Cancel the actual running print
|
|
# rename_existing: CANCEL_PRINT_BASE
|
|
# gcode:
|
|
# TURN_OFF_HEATERS
|
|
# M107 ; turn off fan
|
|
# CANCEL_PRINT_BASE
|
|
|
|
[gcode_macro CANCEL_PRINT]
|
|
rename_existing: BASE_CANCEL_PRINT
|
|
gcode:
|
|
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
|
|
CLEAR_PAUSE
|
|
SDCARD_RESET_FILE
|
|
PRINT_END
|
|
BASE_CANCEL_PRINT
|
|
|
|
[gcode_macro PRINT_START]
|
|
# Use PRINT_START for the slicer starting script - please customize for your slicer of choice
|
|
#gcode:
|
|
# G28 ; home all axes
|
|
# G1 Z20 F3000 ; move nozzle away from bed
|
|
gcode:
|
|
# Parameters
|
|
{% set bedtemp = params.BED|int %}
|
|
{% set hotendtemp = params.HOTEND|int %}
|
|
{% set chambertemp = params.CHAMBER|default(0)|int %}
|
|
|
|
G28 X Y
|
|
# <insert your routines here>
|
|
M190 S{bedtemp} ; set & wait for bed temp
|
|
# TEMPERATURE_WAIT SENSOR="temperature_sensor chamber" MINIMUM={chambertemp} ; wait for chamber temp
|
|
# <insert your routines here>
|
|
M109 S{hotendtemp} ; set & wait for hotend temp
|
|
# <insert your routines here>
|
|
G28 Z ; final z homing
|
|
G1 Z20 F3000 ; move nozzle away from bed
|
|
# SKEW_PROFILE LOAD=my_skew_profile
|
|
|
|
[gcode_macro PRINT_END]
|
|
# Use PRINT_END for the slicer ending script - please customize for your slicer of choice
|
|
gcode:
|
|
M400 ; wait for buffer to clear
|
|
G92 E0 ; zero the extruder
|
|
G1 E-1.40 F400 ; retract filament
|
|
G91 ; relative positioning
|
|
# SET_SKEW CLEAR=1 ; clear skew_profile
|
|
|
|
# Get Boundaries
|
|
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
|
|
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
|
|
{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
|
|
|
|
# Check end position to determine safe direction to move
|
|
{% if printer.toolhead.position.x < (max_x - 20) %}
|
|
{% set x_safe = 20.0 %}
|
|
{% else %}
|
|
{% set x_safe = -20.0 %}
|
|
{% endif %}
|
|
|
|
{% if printer.toolhead.position.y < (max_y - 20) %}
|
|
{% set y_safe = 20.0 %}
|
|
{% else %}
|
|
{% set y_safe = -20.0 %}
|
|
{% endif %}
|
|
|
|
{% if printer.toolhead.position.z < (max_z - 2) %}
|
|
{% set z_safe = 2.0 %}
|
|
{% else %}
|
|
{% set z_safe = max_z - printer.toolhead.position.z %}
|
|
{% endif %}
|
|
|
|
G0 Z{z_safe} F1000 ; move nozzle up ;3600
|
|
G0 X{x_safe} Y{y_safe} F7200 ; move nozzle to remove stringing ;20000 ;9000
|
|
TURN_OFF_HEATERS
|
|
M107 ; turn off fan
|
|
G90 ; absolute positioning
|
|
G0 X60 Y{max_y} F3600 ; park nozzle at rear
|
|
|
|
[gcode_macro TEST_SPEED]
|
|
# Home, get position, throw around toolhead, home again.
|
|
# If MCU stepper positions (first line in GET_POSITION) are greater than a full step different (your number of microsteps), then skipping occured.
|
|
# We only measure to a full step to accomodate for endstop variance.
|
|
# Example: TEST_SPEED SPEED=300 ACCEL=5000 ITERATIONS=10
|
|
|
|
gcode:
|
|
# Speed
|
|
{% set speed = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
|
|
# Iterations
|
|
{% set iterations = params.ITERATIONS|default(5)|int %}
|
|
# Acceleration
|
|
{% set accel = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
|
|
# Bounding inset for large pattern (helps prevent slamming the toolhead into the sides after small skips, and helps to account for machines with imperfectly set dimensions)
|
|
{% set bound = params.BOUND|default(20)|int %}
|
|
# Size for small pattern box
|
|
{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
|
|
|
|
# Large pattern
|
|
# Max positions, inset by BOUND
|
|
{% set x_min = printer.toolhead.axis_minimum.x + bound %}
|
|
{% set x_max = printer.toolhead.axis_maximum.x - bound %}
|
|
{% set y_min = printer.toolhead.axis_minimum.y + bound %}
|
|
{% set y_max = printer.toolhead.axis_maximum.y - bound %}
|
|
|
|
# Small pattern at center
|
|
# Find X/Y center point
|
|
{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
|
|
{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
|
|
|
|
# Set small pattern box around center point
|
|
{% set x_center_min = x_center - (smallpatternsize/2) %}
|
|
{% set x_center_max = x_center + (smallpatternsize/2) %}
|
|
{% set y_center_min = y_center - (smallpatternsize/2) %}
|
|
{% set y_center_max = y_center + (smallpatternsize/2) %}
|
|
|
|
# Save current gcode state (absolute/relative, etc)
|
|
SAVE_GCODE_STATE NAME=TEST_SPEED
|
|
|
|
# Output parameters to g-code terminal
|
|
{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
|
|
|
|
# Absolute positioning
|
|
G90
|
|
|
|
# Set new limits
|
|
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
|
|
|
|
# Home and get position for comparison later:
|
|
G28
|
|
# QGL if not already QGLd (only if QGL section exists in config)
|
|
{% if printer.configfile.settings.quad_gantry_level %}
|
|
{% if printer.quad_gantry_level.applied == False %}
|
|
QUAD_GANTRY_LEVEL
|
|
G28 Z
|
|
{% endif %}
|
|
{% endif %}
|
|
G0 X{printer.toolhead.axis_maximum.x} Y{printer.toolhead.axis_maximum.y} F{30*60}
|
|
G4 P1000
|
|
GET_POSITION
|
|
|
|
# Go to starting position
|
|
G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
|
|
|
|
{% for i in range(iterations) %}
|
|
# Large pattern
|
|
# Diagonals
|
|
G0 X{x_min} Y{y_min} F{speed*60}
|
|
G0 X{x_max} Y{y_max} F{speed*60}
|
|
G0 X{x_min} Y{y_min} F{speed*60}
|
|
G0 X{x_max} Y{y_min} F{speed*60}
|
|
G0 X{x_min} Y{y_max} F{speed*60}
|
|
G0 X{x_max} Y{y_min} F{speed*60}
|
|
|
|
# Box
|
|
G0 X{x_min} Y{y_min} F{speed*60}
|
|
G0 X{x_min} Y{y_max} F{speed*60}
|
|
G0 X{x_max} Y{y_max} F{speed*60}
|
|
G0 X{x_max} Y{y_min} F{speed*60}
|
|
|
|
# Small pattern
|
|
# Small diagonals
|
|
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
|
G0 X{x_center_max} Y{y_center_max} F{speed*60}
|
|
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
|
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
|
G0 X{x_center_min} Y{y_center_max} F{speed*60}
|
|
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
|
|
|
# Small box
|
|
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
|
G0 X{x_center_min} Y{y_center_max} F{speed*60}
|
|
G0 X{x_center_max} Y{y_center_max} F{speed*60}
|
|
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
|
{% endfor %}
|
|
|
|
# Restore max speed/accel/accel_to_decel to their configured values
|
|
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
|
|
|
|
# Re-home and get position again for comparison:
|
|
G28
|
|
# Go to XY home positions (in case your homing override leaves it elsewhere)
|
|
G0 X{printer.toolhead.axis_maximum.x} Y{printer.toolhead.axis_maximum.y} F{30*60}
|
|
G4 P1000
|
|
GET_POSITION
|
|
|
|
# Restore previous gcode state (absolute/relative, etc)
|
|
RESTORE_GCODE_STATE NAME=TEST_SPEED
|
|
|
|
[gcode_macro LOAD_FILAMENT]
|
|
gcode:
|
|
M83 ; set extruder to relative
|
|
G1 E30 F300 ; load
|
|
G1 E15 F150 ; prime nozzle with filament
|
|
M82 ; set extruder to absolute
|
|
|
|
[gcode_macro UNLOAD_FILAMENT]
|
|
gcode:
|
|
M83 ; set extruder to relative
|
|
G1 E10 F300 ; extrude a little to soften tip
|
|
G1 E-40 F1800 ; retract some, but not too much or it will jam
|
|
M82 ; set extruder to absolute
|
|
|
|
[gcode_macro M600]
|
|
gcode:
|
|
#LCDRGB R=0 G=1 B=0 ; Turn LCD green
|
|
PAUSE ; Pause
|
|
|
|
[gcode_macro PAUSE]
|
|
rename_existing: BASE_PAUSE
|
|
gcode:
|
|
# Parameters
|
|
{% set z = params.Z|default(10)|int %} ; z hop amount
|
|
|
|
{% if printer['pause_resume'].is_paused|int == 0 %}
|
|
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z} ; set z hop variable for reference in resume macro
|
|
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target} ; set hotend temp variable for reference in resume macro
|
|
|
|
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0 ; disable filament sensor
|
|
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
|
|
BASE_PAUSE ; pause print
|
|
{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %} ; check that zhop doesn't exceed z max
|
|
G91 ; relative positioning
|
|
G1 Z{z} F900 ; raise Z up by z hop amount
|
|
{% else %}
|
|
{ action_respond_info("Pause zhop exceeds maximum Z height.") } ; if z max is exceeded, show message and set zhop value for resume to 0
|
|
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
|
|
{% endif %}
|
|
G90 ; absolute positioning
|
|
G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000 ; park toolhead at front center
|
|
SAVE_GCODE_STATE NAME=PAUSEPARK ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
|
|
M104 S0 ; turn off hotend
|
|
SET_IDLE_TIMEOUT TIMEOUT=43200 ; set timeout to 12 hours
|
|
{% endif %}
|
|
|
|
[gcode_macro RESUME]
|
|
rename_existing: BASE_RESUME
|
|
variable_zhop: 0
|
|
variable_etemp: 0
|
|
gcode:
|
|
# Parameters
|
|
{% set e = params.E|default(2.5)|int %} ; hotend prime amount (in mm)
|
|
|
|
{% if printer['pause_resume'].is_paused|int == 1 %}
|
|
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1 ; enable filament sensor
|
|
#INITIAL_RGB ; reset LCD color
|
|
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
|
|
{% if etemp > 0 %}
|
|
M109 S{etemp|int} ; wait for hotend to heat back up
|
|
{% endif %}
|
|
RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100 ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
|
|
G91 ; relative positioning
|
|
M83 ; relative extruder positioning
|
|
{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
|
|
G1 Z{zhop * -1} E{e} F900 ; prime nozzle by E, lower Z back down
|
|
{% else %}
|
|
G1 Z{zhop * -1} F900 ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
|
|
{% endif %}
|
|
RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60 ; restore position
|
|
BASE_RESUME ; resume print
|
|
{% endif %}
|
|
|