Adjust, minor.

https://github.com/Sovol3d/Sv06-Source-Code/blob/main/Marlin/Configuration_adv.h#L2648-L2730

moonraker.conf

@@ -5,12 +5,21 @@ klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
 
 [authorization]
 trusted_clients:
-# Enter your client IP here or range here
- 192.168.1.0/24
- 10.0.0.0/24
+    10.0.0.0/16
+    10.0.0.0/8
+    127.0.0.0/8
+    169.254.0.0/16
+    172.16.0.0/12
+    192.168.0.0/16
+    FE80::/10
+    ::1/128
 cors_domains:
-# Allow CORS requests for Fluidd
- http://app.fluidd.xyz
+    http://*.lan
+    http://*.local
+    https://my.mainsail.xyz
+    http://my.mainsail.xyz
+    https://app.fluidd.xyz
+    http://app.fluidd.xyz
 
 [octoprint_compat]
 
@@ -32,20 +41,20 @@ path: ~/mainsail
 enable_object_processing: True
 
 # Crowsnest update_manager entry
-# [update_manager crowsnest]
-# type: git_repo
-# path: ~/crowsnest
-# origin: https://github.com/mainsail-crew/crowsnest.git
-# managed_services: crowsnest
-# install_script: tools/pkglist.sh
+[update_manager crowsnest]
+type: git_repo
+path: ~/crowsnest
+origin: https://github.com/mainsail-crew/crowsnest.git
+managed_services: crowsnest
+install_script: tools/pkglist.sh
 
-# [update_manager timelapse]
-# type: git_repo
-# primary_branch: main
-# path: ~/moonraker-timelapse
-# origin: https://github.com/mainsail-crew/moonraker-timelapse.git
-# managed_services: klipper moonraker
+[update_manager timelapse]
+type: git_repo
+primary_branch: main
+path: ~/moonraker-timelapse
+origin: https://github.com/mainsail-crew/moonraker-timelapse.git
+managed_services: klipper moonraker
 
-# [timelapse]
-# output_path: ~/printer_data/timelapse/
-# frame_path: /tmp/timelapse/printer
+[timelapse]
+output_path: ~/printer_data/timelapse/
+frame_path: /tmp/timelapse/printer

printer.cfg

@@ -42,7 +42,7 @@ uart_pin: PC1
 run_current: 0.900 # 0.860 marlin & master
 stealthchop_threshold: 0
 interpolate: False
-sense_resistor: 0.150
+sense_resistor: 0.110 # 0.150
 uart_address: 3
 driver_SGTHRS: 81
 diag_pin: PA5
@@ -64,7 +64,7 @@ uart_pin: PC0
 run_current: 0.900
 stealthchop_threshold: 0
 interpolate: False
-sense_resistor: 0.150
+sense_resistor: 0.110 # 0.150
 uart_address: 3
 driver_SGTHRS: 81
 diag_pin: PA6
@@ -85,7 +85,7 @@ uart_pin: PA15
 run_current: 0.800 # 0.900 prev personal # 0.800 marlin # 1.000 master
 stealthchop_threshold: 0
 interpolate: False
-sense_resistor: 0.150
+sense_resistor: 0.110 # 0.150
 uart_address: 3
 diag_pin: PA7
 
@@ -108,7 +108,7 @@ min_temp: 0
 max_temp: 300
 max_extrude_only_distance: 150.0
 max_extrude_cross_section: 5 # NOTE Needed for KAMP purge
-pressure_advance: 0.026 # 0.031 # 0.0435 # 0.0465 # 0.044
+pressure_advance: 0.031 # 0.0435 # 0.0465 # 0.044
 
 [tmc2209 extruder]
 uart_pin: PC14
@@ -184,11 +184,10 @@ encoder_pins: ^PB14, ^PB10
 click_pin: ^!PB2
 
 [input_shaper]
-# try X: mzv 54.6 
-shaper_type_x = 2hump_ei # mzv
-shaper_freq_x = 76.2     # 50.4
-shaper_type_y = mzv      # mzv
-shaper_freq_y = 40.4     # 41.4
+shaper_freq_x: 50.4 # 55.8 # 55.2 # 53.4 # 56.0 # 56.6 # 55.0 ; recommend accel <7500; 9200
+shaper_type_x: mzv
+shaper_freq_y: 41.4 # 42.4 # 43.2 # 45.4 # 48.4 ; recommend accel < 5000;5300
+shaper_type_y: mzv
 
 [bed_screws]
 screw1_name: front left