Update klipper.bin. Update OS bundles; minor improvements.

Squashed commit of the following:

commit 41b619305bb09fc03c07b838d1a2c0cea717a96f
Author: Bassam Husain <bassam.husain@gmail.com>
Date:   Thu Nov 6 15:17:04 2025 -0500

    Update OS bundles; minor improvements.

commit da6b3be36abda94b21fb1bd3c10d72006cb57a4c
Author: Bassam Husain <bassam.husain@gmail.com>
Date:   Tue Oct 21 12:46:28 2025 -0400

    Update firmware: v0.13.0-114-g841a9ca2f.

.vscode/settings.json

@@ -1,7 +1,5 @@
 {
 	"editor.tabSize": 4,
-	// "editor.formatOnSave": false,
-	// "editor.defaultFormatter": "mervin.markdown-formatter",
 	"editor.insertSpaces": true,
 	"editor.detectIndentation": false,
 	"git.mergeEditor": false,
@@ -20,7 +18,6 @@
 		"Klipper",
 		"Klipperized",
 		"lrwxrwxrwx",
-		"menuconfig",
 		"microsteps",
 		"moonraker",
 		"normalsize",

README.md

@@ -7,9 +7,9 @@ support my open source work ❤️
 # One-Stop-Shop Klipper Configuration
 
 | Printer                                                       | Branch                                                                                    |
-| ------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------- |
-| Sovol SV06                                                                     | [master](https://github.com/bassamanator/Sovol-SV06-firmware/tree/master)           |
-| ${\normalsize{\textcolor{darkturquoise}{\text{Sovol SV06 SKR-Mini-E3-V3.0}}}}$ | ⚡ ${\small{\textcolor{darkturquoise}{\text{YOU ARE HERE}}}}$ ⚡                      |
+| ------------------------------------------------------------- | ----------------------------------------------------------------------------------------- |
+| ${\normalsize{\textcolor{darkturquoise}{\text{Sovol SV06}}}}$ | ⚡ ${\scriptsize{\textcolor{darkturquoise}{\text{YOU ARE HERE}}}}$ ⚡                     |
+| Sovol SV06 SKR-Mini-E3-V3.0                                   | [skr-mini-e3-v3](https://github.com/bassamanator/Sovol-SV06-firmware/tree/skr-mini-e3-v3) |
 | Sovol SV06 Fly-E3-Pro-V3                                      | [fly-e3-pro-v3](https://github.com/ElPainis/Fly-E3-Pro-v3) \*\*                           |
 | Sovol SV06 Plus                                               | [sv06-plus](https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus)           |
 | All other printers                                            | [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer)       |
@@ -19,16 +19,12 @@ ${\small{\textit{** Maintained by ElPainis}}}$
 > [!WARNING]
 > I am creating these files for my personal use and cannot be held responsible for what it might do to your printer. Use at your own risk.
 
-🙏🏻🙌🏻 Big thanks to [transistor1](https://github.com/transistor1) for getting the `printer.cfg` up an running to begin with.
-
 ## Outline
 
 - [Features](#features)
 - [Stay Up-to-Date](#stay-up-to-date)
 - [Preface](#preface)
 - [Before You Begin](#before-you-begin)
-- [Electronic Wiring](#electronic-wiring)
-  - [⚠️ Important Note About Stepper Motor Current](#important-note-about-stepper-motor-current)
 - [Klipper Installation](#klipper-installation)
   - [Flash Firmware](#flash-firmware)
   - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
@@ -111,19 +107,6 @@ In many ways, this entire repository can be considered _my opinion_ on the `3D p
 
 [🔼 Back to top](#outline)
 
-## Electronic Wiring
-
-Wire cables according to the following diagram:
-<img src="./misc/skr-mini/skr-mini-e3-v3.0-v1715751911501.png" alt='skr-mini-e3-v3.0 installation instructions'/>
-
-### Important Note About Stepper Motor Current
-
-For the SKR-Mini-E3-V3.0, the `run_current` for x, y, z stepper motors has been reduced in the `printer.cfg`, because the standard current seems to make the steppers dangerously hot. You may have to increase the current, or if the motors are still too hot, you may have to decrease it.
-
-💡 Although stepper motors can withstand upwards of 125C, they should at the most get hot to the touch (~55C), not _very hot_.
-
-[🔼 Back to top](#outline)
-
 ## Klipper Installation
 
 ### Flash Firmware
@@ -132,9 +115,10 @@ For the SKR-Mini-E3-V3.0, the `run_current` for x, y, z stepper motors has been
 
 Please note:
 
-- For the sake of simplicity, I will refer to the klipper firmware file as `firmware.bin` even though the actual filename is something along the lines of `firmware-v0.12.0-10-gea2f6bc0-UNTESTED.bin`.
-- The firmware file **must** be named `firmware.bin`.
-- The firmware file is located in `misc/skr-mini`.
+- For the sake of simplicity, I will refer to the firmware file as `klipper.bin` even though the actual filename is something along the lines of `klipper-v0.11.0-148-g52f4e20c.bin`.
+- The firmware file is located in the `misc` folder.
+- Flashing will only work if current firmware filename is _different from previous flashing procedure_. The `.bin` is also important.
+- You may find this [video](https://youtu.be/p6l253OJa34) useful.
 
 > [!WARNING]
 > Many users have reported having issues flashing Klipper using the Sovol microSD card.
@@ -149,7 +133,7 @@ Please note:
 #### 2. Flashing Procedure
 
 1. Disconnect any USB cables that might be connected to the motherboard.
-2. Copy `firmware.bin` to the microSD card.
+2. Copy `klipper.bin` to the microSD card.
 3. Make sure the printer is off.
 4. Insert the microSD card into printer.
 5. Turn on the printer and wait a minute (usually takes 10 seconds).
@@ -171,13 +155,13 @@ Please note:
 3. Empty entire `~/printer_data/config` folder.
    - In linux, you can delete files via `rm fileName` and directories via `rmdir directoryName`.
    - In linux, you can list files and folders via `ls -lah`.
-4. `git clone -b skr-mini-e3-v3 --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .` ⚠️ Don't miss the period!
+4. `git clone -b master --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .` ⚠️ Don't miss the period!
 
 #### Method 2: Download the ZIP
 
-1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/skr-mini-e3-v3.zip) the `ZIP` file containing the Klipper configuration.
-2. See Step 2 in Method 1.
-3. The parent folder in the `ZIP` is `Sovol-SV06-firmware-skr-mini-e3-v3`. This is relevant in the next step.
+1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/master.zip) the `ZIP` file containing the Klipper configuration.
+2. See `Step 2` in `Method 1`.
+3. The parent folder in the `ZIP` is `Sovol-SV06-firmware-master`. This is relevant in the next step.
 4. Extract **only** the _contents_ of the parent folder into `~/printer_data/config`.
 
 [🔼 Back to top](#outline)
@@ -362,6 +346,13 @@ Edit the relevant file according to your needs.
 | `variable_bed_temp_over`           | `0`           | `10` (default) | Speeds up print start                          |
 | `variable_bed_temp_not_exact`      | `0`           | `1` (default)  | Speeds up print start                          |
 
+### Any differences between this configuration and Sovol's Marlin firmware?
+
+| Property                  | Marlin | OSS Klipper Config |
+| ------------------------- | ------ | ------------------ |
+| `stepper_z` `run_current` | 0.800  | 0.900              |
+| `microsteps`              | 16     | 128                |
+
 ### How do I import a configuration bundle into SuperSlicer/PrusaSlicer?
 
 Please see this [discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13).
@@ -451,7 +442,7 @@ Some tips:
 
 ### How do I compile my own firmware?
 
-Please see this [discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/117).
+Please see this [discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/111).
 
 [🔼 Back to top](#outline)
 

misc/compile-how-to.md

@@ -23,8 +23,6 @@ You have to decide what camp you want to be apart off.
 
 ##### Update Klipper repo first
 
-\*\* _For those coming from the_ ${\small{\textcolor{WildStrawberry}{\texttt{Before You B.egin}}}}$ _section (installing Klipper for the first time), complete_ **only** _this section_. No need to compile the firmware, etc.
-
 It's always best to update the Klipper repository that lives on the host before compiling. This ensures that your `klipper.bin` will be as 'fresh' as possible.
 
 - In `Fluidd`, you can do this from `Settings` > `Software Updates`.
@@ -39,6 +37,10 @@ It's always best to update the Klipper repository that lives on the host before
 3. `make menuconfig`
 4. Set things up to look as follows:
    ![make-menuconfig](https://github.com/bassamanator/Sovol-SV06-firmware/assets/61985779/22298d47-2604-4231-ad10-7d6793be7904)
+
+> [!NOTE]
+> New option added: `Optimize stepper code for 'step on both edges'`, enable it.
+
 5. `make clean`
    - Clears `~/klipper/out/`
 6. `make`

misc/update-hot-to.md

@@ -0,0 +1,73 @@
+\*\* _Flashing the firmware is not required for any method_
+
+## Should You Update?
+
+I treat this config like software, and like any piece of modern software, it will require periodic updates to fix issues, add features, improve functionality, etc. So, if you want to have the latest and greatest, I recommend you periodically pull the changes from this repo.
+
+### What Changes Should You Be Concerned With
+
+The only changes you need to be concerned with relate to the `.cfg` and `.conf` files; all changes to `.md` files (these are markdown files, the text that you see when you visit this repo) can be ignored.
+
+### Git Users
+
+If you do a `git diff origin/master --name-only` and it shows you that a `.cfg` file has changed, you might want to pull in those changes (but you don't have to).
+
+### Non-Git Users
+
+Unfortunately, there's no simple way for you to ascertain whether there have been changes. I simply recommend that you update your config via the instructions below from time to time.
+
+## Hot to Update
+
+There are three methods to accomplish this:
+
+1. The correct method, using `git`.
+2. The mostly acceptable method, without using `git`.
+3. The start-from-scratch method. _Recommended for non-git users and those who haven't made many changes to their configuration._
+
+### The `git` method.
+
+⚠️ This method is only intended for those who already know how to use `git`.
+
+🗒️ In this example, I'm using the `master` branch which applies to SV06 users only. Be sure to use the appropriate branch for your printer.
+
+🗒️ The assumption is that you didn't change branches after the initial setup, so you are in `master`, and there are many untracked changes.
+
+1. `ssh` into your Klipper host.
+2. `cd ~/printer_data/config`
+3. `git checkout -b my-settings`
+4. `git add .`
+5. `git commit -m "Saving my settings."`
+6. `git checkout master`
+7. `git pull`
+8. `git checkout my-settings`
+9. `git merge master --no-ff --no-commit`
+10. Deal with comparing and pulling in incoming changes from `master` using your favourite code editor. You can also do this from the command line via `git commit --interactive`, however, only advanced `git` users should attempt this, though it is easy enough.
+11. Add all welcomed changes to the staging area, and discard all other changes.
+12. `git commit -m "Update with upstream."`
+
+You should push your branch to your own fork of this repo.
+
+For any future updates, you can run through the same process again, however, you cannot re-create the `my-settings` branch as you did in `step 3`, because it already exists. Simply omit the `-b` flag in `step 3` next time you update.
+
+### The mostly acceptable method.
+
+This method has shortcomings, because it relies on the user's memory, and requires more manual edits. Perfectly functional method, however.
+
+1. Read all the documentation.
+2. Backup your current configuration, essentially everything inside `~/printer_data/config`.
+3. Repeat steps in [Download OSS Klipper Configuration](https://github.com/bassamanator/Sovol-SV06-firmware#download-oss-klipper-configuration), and [Adjust Configuration with MCU Path](https://github.com/bassamanator/Sovol-SV06-firmware#adjust-configuration-with-mcu-path).
+4. Copy everything from `#*# <---------------------- SAVE_CONFIG ---------------------->` onward and paste into new `printer.cfg`, inclusive.
+5. Copy any other changes you might have made into the new configuration. Maybe you had adjusted the size of your printer (`position_max`), or other such changes.
+
+### The start-from-scratch method.
+
+1. Delete the folder `~/printer_data/config`.
+2. Recreate the folder `~/printer_data/config` via `mkdir ~/printer_data/config`.
+3. Start the Klipper installation process starting from `Download OSS Klipper Configuration` in the appropriate branch.
+
+## Linux Tips
+
+- In linux, you can delete files via `rm fileName` and directories via `rmdir directoryName`.
+- In linux, you can list files and folders via `ls -lah`.
+
+You are now up-to-date with this repo, and have added your personal settings on top.

printer.cfg

@@ -1,4 +1,4 @@
-# This file contains pin mappings for the Sovol SV06 using the BTT SKR Mini E3 V3.0.
+# This file contains pin mappings for the stock Sovol SV06.
 # 
 # Find installation instructions at https://github.com/bassamanator/Sovol-SV06-firmware
 # 
@@ -24,10 +24,10 @@ square_corner_velocity: 8.0
 #####################################################################
 
 [stepper_x]
-step_pin: PB13
-dir_pin: PB12
-enable_pin: !PB14
-microsteps: 64
+step_pin: PC2
+dir_pin: !PB9
+enable_pin: !PC3
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_x:virtual_endstop
 position_endstop: 0
@@ -36,21 +36,20 @@ homing_speed: 40
 homing_retract_dist: 0
 
 [tmc2209 stepper_x]
-uart_pin: PC11
-tx_pin: PC10
-run_current: 0.600
+uart_pin: PC1
+run_current: 0.860
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
-uart_address: 0
+uart_address: 3
 driver_SGTHRS: 81
-diag_pin: PC0
+diag_pin: PA5
 
 [stepper_y]
-step_pin: PB10
-dir_pin: !PB2
-enable_pin: !PB11
-microsteps: 64
+step_pin: PB8
+dir_pin: PB7
+enable_pin: !PC3
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_y:virtual_endstop
 position_endstop: 0
@@ -59,21 +58,20 @@ homing_speed: 40
 homing_retract_dist: 0
 
 [tmc2209 stepper_y]
-uart_pin: PC11
-tx_pin: PC10
-run_current: 0.600
+uart_pin: PC0
+run_current: 0.900
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
-uart_address: 2
+uart_address: 3
 driver_SGTHRS: 81
-diag_pin: PC1
+diag_pin: PA6
 
 [stepper_z]
-step_pin: PB0
-dir_pin: PC5
-enable_pin: !PB1
-microsteps: 64
+step_pin: PB6
+dir_pin: !PB5
+enable_pin: !PC3
+microsteps: 128
 rotation_distance: 4
 endstop_pin: probe:z_virtual_endstop
 position_min: -4
@@ -81,30 +79,29 @@ position_max: 258 # NOTE You can adjust this if you have more room
 homing_speed: 5
 
 [tmc2209 stepper_z]
-uart_pin: PC11
-tx_pin: PC10
-run_current: 0.600
+uart_pin: PA15
+run_current: 0.900
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
-uart_address: 1
-# diag_pin: PC2 # Should not be needed
+uart_address: 3
+diag_pin: PA7
 
 #####################################################################
 #   Extruder
 #####################################################################
 
 [extruder]
-step_pin: PB3
-dir_pin: PB4
-enable_pin: !PD1
-microsteps: 64
+step_pin: PB4
+dir_pin: !PB3
+enable_pin: !PC3
+microsteps: 128
 rotation_distance: 4.65 # NOTE Calibrate e-steps https://www.klipper3d.org/Rotation_Distance.html#calibrating-rotation_distance-on-extruders, https://github.com/bassamanator/everything-sovol-sv06/blob/main/howto.md#calibrate-esteps
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: PC8
+heater_pin: PA1
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: PA0
+sensor_pin: PC5
 control: pid
 pid_kd: 86.991
 pid_kp: 21.479
@@ -115,8 +112,7 @@ max_extrude_only_distance: 150.0
 max_extrude_cross_section: 5 # NOTE Needed for KAMP purge
 
 [tmc2209 extruder]
-uart_pin: PC11
-tx_pin: PC10
+uart_pin: PC14
 run_current: 0.550
 stealthchop_threshold: 0
 interpolate: False
@@ -128,7 +124,7 @@ uart_address: 3
 #####################################################################
 
 [heater_bed]
-heater_pin: PC9
+heater_pin: PA2
 sensor_type: EPCOS 100K B57560G104F
 sensor_pin: PC4
 control: pid
@@ -143,7 +139,7 @@ max_temp: 110
 #####################################################################
 
 [probe]
-pin: PC14
+pin: PB1
 x_offset: 27
 y_offset: -20
 z_offset: 0
@@ -177,22 +173,8 @@ calibrate_y: 115
 #   Fans
 #####################################################################
 
-# FAN1
 [fan]
-pin: PC6
-
-# FAN2
-[controller_fan electronic_enclosure_fan]
-pin: PB15
-idle_timeout: 60
-idle_speed: 0
-stepper: stepper_x, stepper_y, stepper_z
-
-# FAN0
-[heater_fan hotend_fan]
-pin: PC7
-heater: extruder
-heater_temp: 50.0
+pin: PA0
 
 #####################################################################
 #   Misc
@@ -200,11 +182,11 @@ heater_temp: 50.0
 
 [display]
 lcd_type: st7920
-cs_pin: PB8
-sclk_pin: PB9
-sid_pin: PD6
-encoder_pins: ^PA10, ^PA9
-click_pin: ^!PA15
+cs_pin: PB12
+sclk_pin: PB13
+sid_pin: PB15
+encoder_pins: ^PB14, ^PB10
+click_pin: ^!PB2
 
 [bed_screws]
 screw1_name: front left
@@ -231,27 +213,19 @@ horizontal_move_z: 10
 screw_thread: CCW-M4
 
 [output_pin beeper]
-pin: PB5
+pin: PC6
 value: 0
 shutdown_value: 0
 pwm: True
-cycle_time: 0.0005 # Default beeper tone in kHz. 1 / 0.0005 = 2000Hz (2kHz)
+cycle_time: 0.0005 ; Default beeper tone in kHz. 1 / 0.0005 = 2000Hz (2kHz)
 
-# The E0-Stop port: PC15 | GND | +5V
-# Full pinout: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/9b13018d639cf4fbecf004493517f72443d22bb0/hardware/BTT%20SKR%20MINI%20E3%20V3.0/Hardware/BTT%20E3%20SKR%20MINI%20V3.0_PIN.pdf
-# First tester: https://www.reddit.com/r/Sovol/comments/1631jk5/comment/k18rmcy/?utm_source=share&utm_medium=web2x&context=3
-# https://github.com/bassamanator/everything-sovol-sv06?tab=readme-ov-file#filament-sensor
 [filament_switch_sensor filament_sensor]
-switch_pin: PC15 # NOTE Add a ! to the pin to reverse if you're getting the opposite behaviour; !PC15
+switch_pin: !PA4 # "Pulled-high"
 pause_on_runout: True
 insert_gcode:
+    M117 Insert Detected
     { action_respond_info("Insert Detected") }
 runout_gcode:
+    M117 Runout Detected
     { action_respond_info("Runout Detected") }
     CONDITIONAL_BEEP i=3 dur=300 freq=400
-
-[board_pins]
-aliases:
-    # EXP1 header
-    EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
-    EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PD6, EXP1_10=<5V>