186 Commits

Author	SHA1	Message	Date
Bassam Husain	bc612db077	Manual bed mesh edit b10.	2023-04-09 10:50:23 -04:00
Bassam Husain	ef774efde3	Manual bed mesh edit b9.	2023-04-09 10:17:54 -04:00
Bassam Husain	44a1db591b	Set microsteps to 128; MCU can't handle generate those microsteps in all conditions.	2023-04-08 21:21:38 -04:00
Bassam Husain	953daefa32	Adjusted PRINT_START sequence to save time, and to prevent oozing. Increased microsteps to 128, and added square_corner_velocity.	2023-04-07 09:52:06 -04:00
Bassam Husain	85b2ca15e8	Set microsteps to 256.	2023-04-06 08:28:35 -04:00
Bassam Husain	857a8fdd3b	New shaper x.	2023-04-03 05:26:46 -04:00
Bassam Husain	3b59b534c9	Adjust max accel and velocity.	2023-04-02 20:11:15 -04:00
Bassam Husain	39131e0d66	Merge branch 'master' of github.com:bassamanator/Sovol-SV06-firmware	2023-04-02 11:08:47 -04:00
Bassam Husain	a19df40bed	Adjusted stepper_x.run_current: 0.900.	2023-03-31 19:31:45 -04:00
Bassam Husain	57f4aa303f	Merge branch 'temp-ms-good-mesh-edited' into personal	2023-03-30 08:27:31 -04:00
Bassam Husain	2ad0456132	Adjusted mesh manually. Increase currents x and y.	2023-03-30 07:55:38 -04:00
Bassam Husain	64825fda41	New edited mesh, mostly good. New z_offset.	2023-03-30 07:39:40 -04:00
Bassam Husain	5ba208b674	Adjusted mesh manually.	2023-03-30 05:51:42 -04:00
Bassam Husain	baa31179a3	Adjusted mesh manually.	2023-03-29 20:08:11 -04:00
Bassam Husain	6dafba0ab8	Adjusted mesh manually.	2023-03-29 02:04:09 -04:00
Bassam Husain	837f6d1e19	Adjusted mesh manually.	2023-03-29 02:00:38 -04:00
Bassam Husain	efddacb0cb	Merge branch 'personal' into temp-ms-good-mesh-edited	2023-03-29 01:23:20 -04:00
Bassam Husain	aff79ff8de	Merge remote-tracking branch 'origin/temp-ms' into personal	2023-03-26 14:24:43 -04:00
Bassam Husain	382b4c4159	New edited mesh, mostly good.	2023-03-26 01:57:41 -04:00
Bassam Husain	dd71ed1320	Removed stealthchop_threshold.	2023-03-26 01:50:55 -04:00
Bassam Husain	e469e05a91	New mesh and z_offset.	2023-03-25 21:47:41 -04:00
Bassam Husain	3c73cf3461	Removed temperature_wait. Increased microsteps to 128.	2023-03-24 03:12:40 -04:00
Bassam Husain	104c9fca75	Increased square_corner_velocity to 8.	2023-03-23 02:40:49 -04:00
Bassam Husain	5fcb29322d	Adjusted z_offset; too much squish.	2023-03-20 14:11:32 -04:00
Bassam Husain	04fb184c86	New input shaper x after 5015 fan.	2023-03-14 23:21:09 -04:00
Bassam Husain	2303b4422a	New pid extruder and bed.	2023-03-14 22:28:57 -04:00
Bassam Husain	c2bd1fa076	More changes pulled from personal. Added filament sensor pinout.	2023-03-14 19:47:16 -04:00
Bassam Husain	64a6f98fe4	Pulling in structure from personal branch.	2023-03-14 18:36:53 -04:00
Bassam Husain	c20f18280c	Changed extruder microsteps to 64.	2023-03-14 01:26:12 -04:00
Bassam Husain	5ccabd1a3d	Added conditional beeping.	2023-03-12 01:53:44 -05:00
Bassam Husain	69a5cbc45c	Merging filament sensor related code.	2023-03-12 01:32:40 -05:00
Bassam Husain	3c84c049c8	Rearranged beeper section.	2023-03-11 23:19:47 -05:00
Bassam Husain	e972231cd1	Added not about e-steps.	2023-03-11 19:47:18 -05:00
Bassam Husain	47b6c370a0	Merge branch 'structure' into personal	2023-03-11 19:44:33 -05:00
Bassam Husain	110c84f451	Added headings for sections in printer.cfg.	2023-03-10 05:39:51 -05:00
Bassam Husain	7f05e62e94	Removed pressure_advance.	2023-03-10 05:13:50 -05:00
Bassam Husain	95dbb44ad2	Merge branch 'master' into personal	2023-03-10 05:08:56 -05:00
Bassam Husain	6c63082072	Moved many sections from printer.cfg to misc-macros.cfg.	2023-03-10 04:52:04 -05:00
Bassam Husain	557545a17f	Input shaper section comments.	2023-03-08 14:10:49 -05:00
Bassam Husain	e453f74597	New input shaper.	2023-03-08 12:47:24 -05:00
Bassam Husain	c3e4b85ca2	New z_offset and mesh.	2023-03-08 11:57:52 -05:00
Bassam Husain	648346616e	New z_offset.	2023-03-08 03:41:15 -05:00
Bassam Husain	ae24ae66d4	New z_offset and mesh.	2023-03-03 22:57:22 -05:00
Bassam Husain	6f274b7392	Adjusted z position min.	2023-03-03 22:31:54 -05:00
Bassam Husain	bcea3555cf	New z_offset and mesh.	2023-03-03 22:16:39 -05:00
Bassam Husain	c2a8de51a9	New z_offset and mesh.	2023-03-02 17:27:01 -05:00
Bassam Husain	44670bf489	New bed installed; new pid values.	2023-03-02 16:08:45 -05:00
bassamanator	119c313434	NOTE: users SHOULD pull in these changes. Removed test_speed.cfg import; macro is not ready for use.	2023-02-27 21:43:44 -05:00
Bassam Husain	2ade28b750	Set x, y, z microsteps to 64 to reduce whine.	2023-02-24 15:44:46 -05:00
Bassam Husain	6af7d81daf	New z_offset and mesh after new part cooler. Prev z_offset 1.515 was good.	2023-02-21 20:59:59 -05:00