Adjust PS config bundle.

misc/PrusaSlicer_config_bundle-SV06-Both.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 23:37:05 UTC
+# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-20 at 02:32:36 UTC
 
 [print:0.20mm QUALITY SV06 Ellis]
 avoid_crossing_curled_overhangs = 0
@@ -73,6 +73,7 @@ max_volumetric_speed = 15
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -249,6 +250,7 @@ max_volumetric_speed = 15
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -262,7 +264,7 @@ overhangs = 1
 perimeter_acceleration = 1000
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.46
-perimeter_generator = classic
+perimeter_generator = arachne
 perimeter_speed = 150
 perimeters = 3
 post_process = 
@@ -425,6 +427,7 @@ max_volumetric_speed = 15
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -438,7 +441,7 @@ overhangs = 1
 perimeter_acceleration = 1000
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.4
-perimeter_generator = classic
+perimeter_generator = arachne
 perimeter_speed = 150
 perimeters = 4
 post_process = 
@@ -601,6 +604,7 @@ max_volumetric_speed = 15
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -777,6 +781,7 @@ max_volumetric_speed = 15
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -907,16 +912,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 8
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -971,16 +981,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -1035,16 +1050,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -1099,16 +1119,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1163,16 +1188,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = 0.6
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1227,16 +1257,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = 0.8
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1291,16 +1326,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = 0.8
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1355,16 +1395,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";Full spool weight: 1280g"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = 25
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -1419,16 +1464,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1483,16 +1533,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1547,16 +1602,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1611,16 +1671,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";Full spool weight: 1280g"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = 30
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -1675,16 +1740,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";Full spool weight: 1280g"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -1739,16 +1809,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = "- Original print temp was 235.\n- Retraction lenght was 0.3."
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = 30
 filament_settings_id = "Generic FLEX"
 filament_soluble = 0
@@ -1803,16 +1878,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = 0.1
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1867,16 +1947,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 15
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1931,16 +2016,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";max fan speed changed from 0 to 100"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -1995,16 +2085,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.7
+filament_retract_length_toolchange = nil
 filament_retract_lift = 0.6
 filament_retract_lift_above = 0.26
 filament_retract_lift_below = 250
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -2059,16 +2154,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0.6
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = 25
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -2123,16 +2223,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";max fan speed changed from 0 to 100"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -2187,16 +2292,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 12
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";max fan speed changed from 0 to 100"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
@@ -2251,16 +2361,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";Full spool weight: 1280g"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -2315,16 +2430,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -2379,16 +2499,21 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ";Full spool weight: 1280g"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = nil
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = nil
 filament_settings_id = "ABS - KVP"
 filament_soluble = 0
@@ -2580,7 +2705,7 @@ z_offset = 0
 
 [physical_printer:Local SV06]
 host_type = octoprint
-preset_name = Sovol SV06
+preset_name = 
 preset_names = "Sovol SV06"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -2594,7 +2719,7 @@ printhost_user =
 
 [physical_printer:Local SV06 Plus]
 host_type = octoprint
-preset_name = Sovol SV06 Plus
+preset_name = 
 preset_names = "Sovol SV06 Plus"
 print_host = http://10.0.0.51
 printer_technology = FFF