Merge branch 'master' into skr-mini-e3-v3

.github/ISSUE_TEMPLATE/bug_report.md

@@ -23,6 +23,9 @@ A clear and concise description of what you expected to happen.
 **Screenshots**
 If applicable, add screenshots to help explain your problem.
 
+**What printer are you using?**
+- SV06, SV06 Plus, etc.
+
 **What kind of device are you using to host Klipper?**
  - OS: [e.g. old laptop, PC, Raspberry Pi]
  - Version: []
@@ -30,5 +33,8 @@ If applicable, add screenshots to help explain your problem.
 **How did you install Klipper?**
  - Manual install, KIAUH, MainsailOS, FluiddPi, etc.
 
+**Is your local copy of this configuration up to date?**
+- This configuration changes all the time, when did you install it? Are you sure you're running the latest version?
+
 **Additional context**
 Add any other context about the problem here.

README.md

@@ -54,7 +54,7 @@ I am creating these files for my personal use and cannot be held responsible for
 
 ## Stay Up-to-Date
 
-⭐ ${\normalsize{\textcolor{goldenrod}{\texttt{Star this project}}}}$ (Highly recommended, starred users may receive priority over regular users)
+⭐ ${\normalsize{\textcolor{goldenrod}{\texttt{Star this project}}}}$
 
 Watch for releases and updates.
 
@@ -71,7 +71,7 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 - Follow the steps in order.
 - If an error was reported at a step, do no proceed to the next step.
 - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
-- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#put-tape-on-the-5v-pin) the USB cable's 5V pin.
+- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#disable-usb-cable-5v-pin) the USB cable's 5V pin.
 - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
 - Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
 - Robert Redford's performance in _Spy Game (2001)_ was superb!

cfgs/CALIBRATION.cfg

@@ -22,6 +22,7 @@ gcode:
     G1 X{max_x/2} Y{max_y/2} Z10 F6000
     M106 S64
     PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}
+    M107 ; Turn off print cooling fan
 
 # TODO test this
 [gcode_macro PID_TEST_ALL]

printer.cfg

@@ -99,7 +99,7 @@ step_pin: PB3
 dir_pin: PB4
 enable_pin: !PD1
 microsteps: 64
-rotation_distance: 4.65
+rotation_distance: 4.65 # NOTE Calibrate e-steps https://www.klipper3d.org/Rotation_Distance.html#calibrating-rotation_distance-on-extruders, https://github.com/bassamanator/everything-sovol-sv06/blob/main/howto.md#calibrate-esteps
 nozzle_diameter: 0.400
 filament_diameter: 1.750
 heater_pin: PC8