PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Rearrangment in printer.cfg.

Browse Source
This commit is contained in:
Bassam Husain
2022-12-26 00:41:06 -05:00
parent d69c2da3b8
commit da96d5a413
1 changed files with 24 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

48
klipper-printer-sovol-sv06.cfg
View File

@@ -78,28 +78,6 @@ uart_address: 3
driver_SGTHRS: 82
diag_pin: PA6
#####################################################################
# ADXL345 related Settings
# https://www.klipper3d.org/Measuring_Resonances.html#adxl345
#####################################################################
# Uncomment this section if you're using an adxl345
# [mcu rpi]
# serial: /tmp/klipper_host_mcu
# [adxl345]
# cs_pin: rpi:None
# [resonance_tester]
# accel_chip: adxl345
# probe_points: 110, 110, 20
# [input_shaper]
# shaper_freq_x = 114.6
# shaper_type_x: mzv
# shaper_freq_y = 77
# shaper_type_y: mzv
#####################################################################
# Z Stepper Settings
#####################################################################
@@ -156,12 +134,34 @@ interpolate: False
sense_resistor: 0.150
uart_address: 3
#####################################################################
# ADXL345 related Settings
# https://www.klipper3d.org/Measuring_Resonances.html#adxl345
#####################################################################
# Uncomment this section if you're using an adxl345
# [mcu rpi]
# serial: /tmp/klipper_host_mcu
# [adxl345]
# cs_pin: rpi:None
# [resonance_tester]
# accel_chip: adxl345
# probe_points: 110, 110, 20
# [input_shaper]
# shaper_freq_x = 114.6
# shaper_type_x: mzv
# shaper_freq_y = 77
# shaper_type_y: mzv
#####################################################################
# Misc
#####################################################################
[virtual_sdcard]
path: /home/pi/gcode_files/
# [virtual_sdcard]
# path: /home/pi/gcode_files/
[temperature_sensor mcu_temp]
sensor_type: temperature_mcu