PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Re-added temperature_wait.

Browse Source
This commit is contained in:
Bassam Husain
2023-03-27 16:57:42 -04:00
parent d08bbb7f23
commit d227fcb58f
1 changed files with 18 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

38
cfgs/misc-macros.cfg
View File

@@ -52,31 +52,29 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
{% endif %}
# [gcode_macro M109]
# rename_existing: M99109
# gcode:
# #Parameters
# {% set s = params.S|float %}
[gcode_macro M109]
rename_existing: M99109
gcode:
#Parameters
{% set s = params.S|float %}
# M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
# {% if s != 0 %}
# TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
# {% endif %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
{% endif %}
# [gcode_macro M190]
# rename_existing: M99190
# gcode:
# #Parameters
# {% set s = params.S|float %}
[gcode_macro M190]
rename_existing: M99190
gcode:
#Parameters
{% set s = params.S|float %}
# M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp
# {% if s != 0 %}
# TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree)
# {% endif %}
M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree)
{% endif %}
[gcode_macro PURGE_LINE]
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1