From d227fcb58fe110af5655fa3b36a3985e3c5380d8 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Mon, 27 Mar 2023 16:57:42 -0400
Subject: [PATCH] Re-added temperature_wait.

---
 cfgs/misc-macros.cfg | 38 ++++++++++++++++++--------------------
 1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/cfgs/misc-macros.cfg b/cfgs/misc-macros.cfg
index 117bce1..39b5675 100644
--- a/cfgs/misc-macros.cfg
+++ b/cfgs/misc-macros.cfg
@@ -52,31 +52,29 @@ gcode:
         SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
     {% endif %}
 
-# [gcode_macro M109]
-# rename_existing: M99109
-# gcode:
-#     #Parameters
-#     {% set s = params.S|float %}
+[gcode_macro M109]
+rename_existing: M99109
+gcode:
+    #Parameters
+    {% set s = params.S|float %}
     
-#     M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
-#     {% if s != 0 %}
-#         TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
-#     {% endif %}
+    M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
+    {% if s != 0 %}
+        TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
+    {% endif %}
 
-# [gcode_macro M190]
-# rename_existing: M99190
-# gcode:
-#     #Parameters
-#     {% set s = params.S|float %}
+[gcode_macro M190]
+rename_existing: M99190
+gcode:
+    #Parameters
+    {% set s = params.S|float %}
 
-#     M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
-#     {% if s != 0 %}
-#         TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
-#     {% endif %}
+    M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
+    {% if s != 0 %}
+        TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
+    {% endif %}
 
 [gcode_macro PURGE_LINE]
-# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
-# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
 gcode:
     {% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
     ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1