PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Added input shaper settings.

Browse Source
This commit is contained in:
Bassam Husain
2023-01-31 14:31:20 -05:00
parent 01f66058ad
commit d1dbc7e2ed
2 changed files with 22 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
macros/adxl-direct.cfg Normal file
View File

@@ -0,0 +1,10 @@
[mcu rpi]
serial: /tmp/klipper_host_mcu
[adxl345]
cs_pin: rpi:None
[resonance_tester]
accel_chip: adxl345
probe_points:
111.5, 111.5, 20

16
printer.cfg
View File

@@ -15,8 +15,9 @@
[include ./macros/PARKING.cfg] [include ./macros/PARKING.cfg]
[include ./macros/MECHANICAL_GANTRY_CALIBRATION.cfg] [include ./macros/MECHANICAL_GANTRY_CALIBRATION.cfg]
[include ./macros/beeper.cfg] [include ./macros/beeper.cfg]
# Uncomment the following line if you're using an adxl345, and have it setup # Uncomment the ONE of the following lines if you're using an adxl345
# [include ./adxl-rp2040.cfg] # [include ./marcros/adxl-rp2040.cfg]
# [include ./macros/adxl-direct.cfg]
[mcu] [mcu]
# Obtain definition by "ls -l /dev/serial/by-id/" # Obtain definition by "ls -l /dev/serial/by-id/"
@@ -175,8 +176,15 @@ sid_pin: PB15
encoder_pins: ^PB14, ^PB10 encoder_pins: ^PB14, ^PB10
click_pin: ^!PB2 click_pin: ^!PB2
[filament_switch_sensor fil_sensor] [input_shaper]
switch_pin: PA4 shaper_freq_x = 56.0
shaper_type_x: mzv
shaper_freq_y = 59.0
shaper_type_y: 3hump_ei
# // TODO Get this working
# [filament_switch_sensor fil_sensor]
# switch_pin: PA4
#*# <---------------------- SAVE_CONFIG ----------------------> #*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.