safe_z_home adjusted. z_offset adjusted.

printer.cfg

@@ -141,15 +141,15 @@ pin: PB1
 x_offset: 27
 y_offset: -20
 # z_offset: 0
-samples: 2
+samples: 3
 samples_tolerance: 0.015
 samples_tolerance_retries: 5
 
 [safe_z_home]
-home_xy_position: 85,135
-speed: 80.0
+home_xy_position: 111.50,111.50
+speed: 100.0
 z_hop: 10
-z_hop_speed: 5
+z_hop_speed: 15
 
 [bed_mesh]
 speed: 120
@@ -188,16 +188,16 @@ click_pin: ^!PB2
 #*# pid_kd = 945.503
 #*#
 #*# [probe]
-#*# z_offset = 1.544
+#*# z_offset = 1.410
 #*#
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  -0.179375, -0.157500, -0.131250, -0.144375, -0.110000
-#*# 	  -0.186875, -0.140625, -0.107500, -0.120625, -0.142500
-#*# 	  -0.193125, -0.113125, -0.073125, -0.080000, -0.103750
-#*# 	  -0.274375, -0.166250, -0.083750, -0.075625, -0.080000
-#*# 	  -0.369375, -0.241875, -0.142500, -0.113125, -0.091250
+#*# 	  -0.375833, -0.252083, -0.181250, -0.243333, -0.326667
+#*# 	  -0.284583, -0.168750, -0.105000, -0.148333, -0.239167
+#*# 	  -0.250833, -0.118750, -0.057500, -0.073333, -0.137917
+#*# 	  -0.337083, -0.171667, -0.081250, -0.084167, -0.134167
+#*# 	  -0.495417, -0.295000, -0.181250, -0.175417, -0.231250
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2