PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjusted README.md.

Browse Source
This commit is contained in:
Bassam Husain
2023-02-19 02:47:08 -05:00
parent 55c8b92809
commit 89c81460ac
1 changed files with 5 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
README.md
View File

@@ -34,8 +34,11 @@ I work on this repository all the time and a lot of new features are coming. Wat
## Before You Begin
- *Read these docs fully!* Your question has probably been answered already. If it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
- Know what you're getting into by reading this documentation *fully!*
- Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
- If you see any errors, or encounter any issues, please create an [Issue](https://github.com/bassamanator/Sovol-SV06-firmware/issues/new), or create a [Pull request](https://github.com/bassamanator/Sovol-SV06-firmware/pulls).
- I would recommend searching for the word `NOTE` in this repository. There are about 6 short points amongst the various files that you should be aware of if you're using this configuration.
## Flash Firmware
💡 *If you have already flashed klipper onto your motherboard in the past, you can skip this step*
@@ -66,9 +69,7 @@ There are many ways to get started, the simplest being to clone this repo to the
⚠️⚡☢️ **Power off if there is a collision/problem** ☢️⚡⚠️
💡 I would recommend searching for the word `NOTE` in this repository. There are about 6 short points amongst the various files that you should be aware of if you're using this configuration.
I recommend no filament be loaded for any of these steps.
💡 I recommend no filament be loaded for any of these steps.
1. Do a `G28`; home all.
1. Check to see if `X` and `Y` max positions (`G1 X223 F3000`, `G1 Y223 F3000`) can be reached, and adjust `position_max`, if necessary. You can probably go all the way up to `225` for `X` and `Y` both, however, I would not recommend it.