Added SS config bundle.

misc/PrusaSlicer_config_bundle-Sovol-SV06.ini

@@ -1,882 +0,0 @@
-# generated by PrusaSlicer 2.5.0+win64 on 2022-12-16 at 14:16:39 UTC
-
-[print:0.08mm SUPER FINE @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 8
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 15
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.08
-max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.24
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.33
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 40
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 0
-top_solid_layers = 11
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.16mm FINE @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 5
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.16
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.22
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 0
-top_solid_layers = 8
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm Flow check @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0
-fill_angle = 45
-fill_density = 0%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 4
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 1
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 2
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 1
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 1
-support_material_closing_radius = 2
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thick_bridges = 1
-thin_walls = 0
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 0
-top_solid_layers = 0
-top_solid_min_thickness = 0.8
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 149.355
-wipe_tower_y = 189.199
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 1
-support_material_closing_radius = 2
-support_material_contact_distance = 0.25
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 0
-top_solid_layers = 6
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.28mm DRAFT@Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.5
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.28
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.24
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.38
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 0
-top_solid_layers = 4
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[printer:Sovol Sv06]
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,220x0,220x220,0x220
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
-between_objects_gcode = 
-color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = "Prusament PLA"
-default_print_profile = 0.15mm QUALITY @MK3
-deretract_speed = 0
-end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-machine_limits_usage = time_estimate_only
-machine_max_acceleration_e = 5000,5000
-machine_max_acceleration_extruding = 1250,1250
-machine_max_acceleration_retracting = 1250,1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 1000,960
-machine_max_acceleration_y = 1000,960
-machine_max_acceleration_z = 200,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 200,100
-machine_max_feedrate_y = 200,100
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 4.5,4.5
-machine_max_jerk_x = 8,8
-machine_max_jerk_y = 8,8
-machine_max_jerk_z = 0.4,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0.28
-max_print_height = 250
-min_layer_height = 0.08
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
-printer_settings_id = Sovol Sv06
-printer_technology = FFF
-printer_variant = 0.4
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.5
-retract_length_toolchange = 4
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
-template_custom_gcode = 
-thumbnails = 32x32,400x300
-thumbnails_format = PNG
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0
-
-[physical_printer:Sv06]
-host_type = octoprint
-preset_name = Sovol Sv06
-preset_names = "Sovol Sv06"
-print_host = 
-printer_technology = FFF
-printhost_apikey = 
-printhost_authorization_type = key
-printhost_cafile = 
-printhost_password = 
-printhost_port = 
-printhost_ssl_ignore_revoke = 0
-printhost_user = 
-
-[presets]
-print = 0.20mm NORMAL @Sovol Sv06
-sla_print = 
-sla_material = 
-printer = Sovol Sv06
-physical_printer = Sv06