mirror of
https://github.com/bassamanator/Sovol-SV06-firmware.git
synced 2025-11-08 21:41:15 +00:00
54 lines
1.7 KiB
INI
54 lines
1.7 KiB
INI
[output_pin beeper]
|
|
pin: PC6
|
|
value: 0
|
|
shutdown_value: 0
|
|
pwm: True
|
|
cycle_time: 0.0005 ; Default beeper tone in kHz. 1 / 0.0005 = 2000Hz (2kHz)
|
|
|
|
[gcode_macro M300]
|
|
gcode:
|
|
{% set S = params.S|default(1000)|int %}
|
|
{% set P = params.P|default(100)|int %}
|
|
|
|
SET_PIN PIN=beeper VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
|
|
G4 P{P}
|
|
SET_PIN PIN=beeper VALUE=0
|
|
|
|
[gcode_macro BEEP]
|
|
description: "BEEP I=3 DUR=200 FREQ=2000: Beep 3 times, for 200ms each, at 2kHz frequency."
|
|
gcode:
|
|
# Parameters
|
|
{% set i = params.I|default(1)|int %} ; Iterations (number of times to beep).
|
|
{% set dur = params.DUR|default(100)|int %} ; Duration/wait of each beep in ms. Default 100ms.
|
|
{% set freq = params.FREQ|default(2000)|int %} ; Frequency in Hz. Default 2kHz.
|
|
|
|
{% for iteration in range(i|int) %}
|
|
SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
|
|
G4 P{dur}
|
|
SET_PIN PIN=beeper VALUE=0
|
|
G4 P{dur}
|
|
{% endfor %}
|
|
|
|
[gcode_macro SONG_SINGLE_BEEP]
|
|
gcode:
|
|
M300 S830.61 P137
|
|
|
|
[gcode_macro TOGGLE_BEEPER]
|
|
description: Toggle the printer beeper on and off.
|
|
gcode:
|
|
{% set beeper_state = printer.save_variables.variables.beeper_state|lower %}
|
|
|
|
{% if printer['gcode_macro _USER_VARIABLE'].debug == 1 %}
|
|
{action_respond_info('==== TOGGLE_BEEPER ====')}
|
|
{action_respond_info("beeper_state: %s" % (beeper_state))}
|
|
{action_respond_info('===============')}
|
|
{% endif %}
|
|
|
|
{% if beeper_state == "off" %}
|
|
{action_respond_info('beeper is off, turning it on')}
|
|
SAVE_VARIABLE VARIABLE=beeper_state VALUE='"on"'
|
|
{% else %}
|
|
{action_respond_info('beeper is on= turning it off')}
|
|
SAVE_VARIABLE VARIABLE=beeper_state VALUE='"off"'
|
|
{% endif %}
|
|
SONG_SINGLE_BEEP |