mirror of
https://github.com/bassamanator/Sovol-SV06-firmware.git
synced 2025-11-08 13:31:16 +00:00
Moved test_speed macro to own file.
This commit is contained in:
Bassam Husain
110
TEST_SPEED.cfg
Normal file
110
TEST_SPEED.cfg
Normal file
@@ -0,0 +1,110 @@
|
||||
# Home, get position, throw around toolhead, home again.
|
||||
# If MCU stepper positions (first line in GET_POSITION) are greater than a full step different (your number of microsteps), then skipping occured.
|
||||
# We only measure to a full step to accomodate for endstop variance.
|
||||
# Example: TEST_SPEED SPEED=300 ACCEL=5000 ITERATIONS=10
|
||||
|
||||
[gcode_macro TEST_SPEED]
|
||||
gcode:
|
||||
# Speed
|
||||
{% set speed = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
|
||||
# Iterations
|
||||
{% set iterations = params.ITERATIONS|default(5)|int %}
|
||||
# Acceleration
|
||||
{% set accel = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
|
||||
# Bounding inset for large pattern (helps prevent slamming the toolhead into the sides after small skips, and helps to account for machines with imperfectly set dimensions)
|
||||
{% set bound = params.BOUND|default(20)|int %}
|
||||
# Size for small pattern box
|
||||
{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
|
||||
|
||||
# Large pattern
|
||||
# Max positions, inset by BOUND
|
||||
{% set x_min = printer.toolhead.axis_minimum.x + bound %}
|
||||
{% set x_max = printer.toolhead.axis_maximum.x - bound %}
|
||||
{% set y_min = printer.toolhead.axis_minimum.y + bound %}
|
||||
{% set y_max = printer.toolhead.axis_maximum.y - bound %}
|
||||
|
||||
# Small pattern at center
|
||||
# Find X/Y center point
|
||||
{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
|
||||
{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
|
||||
|
||||
# Set small pattern box around center point
|
||||
{% set x_center_min = x_center - (smallpatternsize/2) %}
|
||||
{% set x_center_max = x_center + (smallpatternsize/2) %}
|
||||
{% set y_center_min = y_center - (smallpatternsize/2) %}
|
||||
{% set y_center_max = y_center + (smallpatternsize/2) %}
|
||||
|
||||
# Save current gcode state (absolute/relative, etc)
|
||||
SAVE_GCODE_STATE NAME=TEST_SPEED
|
||||
|
||||
# Output parameters to g-code terminal
|
||||
{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
|
||||
|
||||
# Home and get position for comparison later:
|
||||
G28
|
||||
# QGL if not already QGLd (only if QGL section exists in config)
|
||||
{% if printer.configfile.settings.quad_gantry_level %}
|
||||
{% if printer.quad_gantry_level.applied == False %}
|
||||
QUAD_GANTRY_LEVEL
|
||||
G28 Z
|
||||
{% endif %}
|
||||
{% endif %}
|
||||
# Move 50mm away from max position and home again (to help with hall effect endstop accuracy - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/24)
|
||||
G90
|
||||
G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
|
||||
G28 X Y
|
||||
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
|
||||
G4 P1000
|
||||
GET_POSITION
|
||||
|
||||
# Go to starting position
|
||||
G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
|
||||
|
||||
# Set new limits
|
||||
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
|
||||
|
||||
{% for i in range(iterations) %}
|
||||
# Large pattern
|
||||
# Diagonals
|
||||
G0 X{x_min} Y{y_min} F{speed*60}
|
||||
G0 X{x_max} Y{y_max} F{speed*60}
|
||||
G0 X{x_min} Y{y_min} F{speed*60}
|
||||
G0 X{x_max} Y{y_min} F{speed*60}
|
||||
G0 X{x_min} Y{y_max} F{speed*60}
|
||||
G0 X{x_max} Y{y_min} F{speed*60}
|
||||
|
||||
# Box
|
||||
G0 X{x_min} Y{y_min} F{speed*60}
|
||||
G0 X{x_min} Y{y_max} F{speed*60}
|
||||
G0 X{x_max} Y{y_max} F{speed*60}
|
||||
G0 X{x_max} Y{y_min} F{speed*60}
|
||||
|
||||
# Small pattern
|
||||
# Small diagonals
|
||||
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_min} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
||||
|
||||
# Small box
|
||||
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_min} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
||||
{% endfor %}
|
||||
|
||||
# Restore max speed/accel/accel_to_decel to their configured values
|
||||
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
|
||||
|
||||
# Re-home and get position again for comparison:
|
||||
G28
|
||||
# Go to XY home positions (in case your homing override leaves it elsewhere)
|
||||
G90
|
||||
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
|
||||
G4 P1000
|
||||
GET_POSITION
|
||||
|
||||
# Restore previous gcode state (absolute/relative, etc)
|
||||
RESTORE_GCODE_STATE NAME=TEST_SPEED
|
||||
@@ -11,6 +11,7 @@
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
|
||||
[include macros.cfg]
|
||||
[include TEST_SPEED.cfg]
|
||||
[include mechanical_level_tmc2209.cfg]
|
||||
|
||||
[mcu]
|
||||
|
||||
109
macros.cfg
109
macros.cfg
@@ -93,115 +93,6 @@ gcode:
|
||||
G90 ; absolute positioning
|
||||
G0 X60 Y{max_y} F3600 ; park nozzle at rear
|
||||
|
||||
[gcode_macro TEST_SPEED]
|
||||
# Home, get position, throw around toolhead, home again.
|
||||
# If MCU stepper positions (first line in GET_POSITION) are greater than a full step different (your number of microsteps), then skipping occured.
|
||||
# We only measure to a full step to accomodate for endstop variance.
|
||||
# Example: TEST_SPEED SPEED=300 ACCEL=5000 ITERATIONS=10
|
||||
|
||||
gcode:
|
||||
# Speed
|
||||
{% set speed = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
|
||||
# Iterations
|
||||
{% set iterations = params.ITERATIONS|default(5)|int %}
|
||||
# Acceleration
|
||||
{% set accel = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
|
||||
# Bounding inset for large pattern (helps prevent slamming the toolhead into the sides after small skips, and helps to account for machines with imperfectly set dimensions)
|
||||
{% set bound = params.BOUND|default(20)|int %}
|
||||
# Size for small pattern box
|
||||
{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
|
||||
|
||||
# Large pattern
|
||||
# Max positions, inset by BOUND
|
||||
{% set x_min = printer.toolhead.axis_minimum.x + bound %}
|
||||
{% set x_max = printer.toolhead.axis_maximum.x - bound %}
|
||||
{% set y_min = printer.toolhead.axis_minimum.y + bound %}
|
||||
{% set y_max = printer.toolhead.axis_maximum.y - bound %}
|
||||
|
||||
# Small pattern at center
|
||||
# Find X/Y center point
|
||||
{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
|
||||
{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
|
||||
|
||||
# Set small pattern box around center point
|
||||
{% set x_center_min = x_center - (smallpatternsize/2) %}
|
||||
{% set x_center_max = x_center + (smallpatternsize/2) %}
|
||||
{% set y_center_min = y_center - (smallpatternsize/2) %}
|
||||
{% set y_center_max = y_center + (smallpatternsize/2) %}
|
||||
|
||||
# Save current gcode state (absolute/relative, etc)
|
||||
SAVE_GCODE_STATE NAME=TEST_SPEED
|
||||
|
||||
# Output parameters to g-code terminal
|
||||
{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
|
||||
|
||||
# Absolute positioning
|
||||
G90
|
||||
|
||||
# Set new limits
|
||||
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
|
||||
|
||||
# Home and get position for comparison later:
|
||||
G28
|
||||
# QGL if not already QGLd (only if QGL section exists in config)
|
||||
{% if printer.configfile.settings.quad_gantry_level %}
|
||||
{% if printer.quad_gantry_level.applied == False %}
|
||||
QUAD_GANTRY_LEVEL
|
||||
G28 Z
|
||||
{% endif %}
|
||||
{% endif %}
|
||||
G0 X{printer.toolhead.axis_maximum.x} Y{printer.toolhead.axis_maximum.y} F{30*60}
|
||||
G4 P1000
|
||||
GET_POSITION
|
||||
|
||||
# Go to starting position
|
||||
G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
|
||||
|
||||
{% for i in range(iterations) %}
|
||||
# Large pattern
|
||||
# Diagonals
|
||||
G0 X{x_min} Y{y_min} F{speed*60}
|
||||
G0 X{x_max} Y{y_max} F{speed*60}
|
||||
G0 X{x_min} Y{y_min} F{speed*60}
|
||||
G0 X{x_max} Y{y_min} F{speed*60}
|
||||
G0 X{x_min} Y{y_max} F{speed*60}
|
||||
G0 X{x_max} Y{y_min} F{speed*60}
|
||||
|
||||
# Box
|
||||
G0 X{x_min} Y{y_min} F{speed*60}
|
||||
G0 X{x_min} Y{y_max} F{speed*60}
|
||||
G0 X{x_max} Y{y_max} F{speed*60}
|
||||
G0 X{x_max} Y{y_min} F{speed*60}
|
||||
|
||||
# Small pattern
|
||||
# Small diagonals
|
||||
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_min} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
||||
|
||||
# Small box
|
||||
G0 X{x_center_min} Y{y_center_min} F{speed*60}
|
||||
G0 X{x_center_min} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_max} F{speed*60}
|
||||
G0 X{x_center_max} Y{y_center_min} F{speed*60}
|
||||
{% endfor %}
|
||||
|
||||
# Restore max speed/accel/accel_to_decel to their configured values
|
||||
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
|
||||
|
||||
# Re-home and get position again for comparison:
|
||||
G28
|
||||
# Go to XY home positions (in case your homing override leaves it elsewhere)
|
||||
G0 X{printer.toolhead.axis_maximum.x} Y{printer.toolhead.axis_maximum.y} F{30*60}
|
||||
G4 P1000
|
||||
GET_POSITION
|
||||
|
||||
# Restore previous gcode state (absolute/relative, etc)
|
||||
RESTORE_GCODE_STATE NAME=TEST_SPEED
|
||||
|
||||
[gcode_macro LOAD_FILAMENT]
|
||||
gcode:
|
||||
M83 ; set extruder to relative
|
||||
|
||||
Reference in New Issue
Block a user