PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Remade this branch with latest changes from master.

Browse Source
This commit is contained in:
Bassam Husain
2023-03-16 00:39:58 -04:00
parent 903cd16287
commit 5930d03add
4 changed files with 26 additions and 22 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg
View File

@@ -72,16 +72,16 @@ gcode:
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current} ; drop current
{% endif %}
BEEP I=1
# BEEP I=1
G4 P200 ; Probably not necessary, it is here just for sure
SET_KINEMATIC_POSITION Z={z_max - 25} ; Trick printer into beleiving the gantry is 25mm lower than it is ; CHANGED
G1 Z{z_max} F{6 * 60} ; based on above figures, there will be 20mm worth of grinding ; CHANGED
BEEP I=2
# BEEP I=2
G4 P10000 ; wait 10 seconds
G1 Z{z_max -6} F{6 * 60} ; move 4mm down
BEEP I=3
# BEEP I=3
G4 P200 ; same as the first one
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold}

2
cfgs/misc-macros.cfg
View File

@@ -21,7 +21,7 @@ gcode:
[gcode_macro _globals]
variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_beeping_enabled: 0 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_pre_purge_prime_length: 1.4
gcode:
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }