PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjusted SS config bundle for Plus. Spelling fix.

Browse Source
This commit is contained in:
Bassam Husain
2023-04-18 07:56:34 -04:00
parent 4ecb37cf9f
commit 581ff9da48
2 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -113,7 +113,7 @@ You can choose *either* of the 2 following methods.
1. `G28` 1. `G28`
1. Check to see if `X` and `Y` max positions (`G90`, `G1 X300 F3000`, `G1 Y300 F3000`) can be reached, and adjust `position_max`, if necessary. Note, you might be able to go even further. 1. Check to see if `X` and `Y` max positions (`G90`, `G1 X300 F3000`, `G1 Y300 F3000`) can be reached, and adjust `position_max`, if necessary. Note, you might be able to go even further.
2. Do a `G34`; mechanical gantry calibration. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up agaisnt the `stoppers` at the top. ~~You will hear a succession of beeps.~~ 2. Do a `G34`; mechanical gantry calibration. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. ~~You will hear a succession of beeps.~~
1. Figure out your `Z` `position_max` by baby stepping your way up to the beam (`G90`, `G1 Z330 F900`, then move up mm by mm). Adjust `position_max`, if necessary. 1. Figure out your `Z` `position_max` by baby stepping your way up to the beam (`G90`, `G1 Z330 F900`, then move up mm by mm). Adjust `position_max`, if necessary.
3. Pid tune the bed, but first move the printhead to the center. Ideally, all Pid tuning should occur at the temperatures that you print most at. 3. Pid tune the bed, but first move the printhead to the center. Ideally, all Pid tuning should occur at the temperatures that you print most at.
1. `G28` 1. `G28`

4
misc/SuperSlicer_config_bundle.ini
View File

@@ -2550,7 +2550,7 @@ top_fan_speed = -1
[printer:Sovol Sv06] [printer:Sovol Sv06]
bed_custom_model = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl bed_custom_model = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
bed_custom_texture = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png bed_custom_texture = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
bed_shape = 0x0,223x0,223x223,0x223 bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode = before_layer_gcode =
between_objects_gcode = between_objects_gcode =
color_change_gcode = M600 color_change_gcode = M600
@@ -2600,7 +2600,7 @@ machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0 machine_min_travel_rate = 0,0
max_gcode_per_second = 1500 max_gcode_per_second = 1500
max_layer_height = 75% max_layer_height = 75%
max_print_height = 255 max_print_height = 340
milling_diameter = milling_diameter =
milling_toolchange_end_gcode = milling_toolchange_end_gcode =
milling_toolchange_start_gcode = milling_toolchange_start_gcode =