diff --git a/README.md b/README.md
index 03ed2f7..36045eb 100644
--- a/README.md
+++ b/README.md
@@ -113,7 +113,7 @@ You can choose *either* of the 2 following methods.
 
 1. `G28`
    1. Check to see if `X` and `Y` max positions (`G90`, `G1 X300 F3000`, `G1 Y300 F3000`) can be reached, and adjust `position_max`, if necessary. Note, you might be able to go even further.
-2. Do a `G34`; mechanical gantry calibration. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up agaisnt the `stoppers` at the top. ~~You will hear a succession of beeps.~~
+2. Do a `G34`; mechanical gantry calibration. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. ~~You will hear a succession of beeps.~~
    1. Figure out your `Z` `position_max` by baby stepping your way up to the beam (`G90`, `G1 Z330 F900`, then move up mm by mm). Adjust `position_max`, if necessary.
 3. Pid tune the bed, but first move the printhead to the center. Ideally, all Pid tuning should occur at the temperatures that you print most at.
    1. `G28`
diff --git a/misc/SuperSlicer_config_bundle.ini b/misc/SuperSlicer_config_bundle.ini
index b318c70..050a2eb 100644
--- a/misc/SuperSlicer_config_bundle.ini
+++ b/misc/SuperSlicer_config_bundle.ini
@@ -2550,7 +2550,7 @@ top_fan_speed = -1
 [printer:Sovol Sv06]
 bed_custom_model = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
 bed_custom_texture = /home/bassam/3dprinter/voron/voron-0-parts/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
-bed_shape = 0x0,223x0,223x223,0x223
+bed_shape = 0x0,300x0,300x300,0x300
 before_layer_gcode = 
 between_objects_gcode = 
 color_change_gcode = M600
@@ -2600,7 +2600,7 @@ machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
 max_gcode_per_second = 1500
 max_layer_height = 75%
-max_print_height = 255
+max_print_height = 340
 milling_diameter = 
 milling_toolchange_end_gcode = 
 milling_toolchange_start_gcode =