PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Removed temperature_wait. Increased microsteps to 128.

Browse Source
This commit is contained in:
Bassam Husain
2023-03-24 03:12:40 -04:00
parent 104c9fca75
commit 3c73cf3461
2 changed files with 22 additions and 22 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
cfgs/misc-macros.cfg
View File

@@ -52,27 +52,27 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS} SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
{% endif %} {% endif %}
[gcode_macro M109] # [gcode_macro M109]
rename_existing: M99109 # rename_existing: M99109
gcode: # gcode:
#Parameters # #Parameters
{% set s = params.S|float %} # {% set s = params.S|float %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp # M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
{% if s != 0 %} # {% if s != 0 %}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree) # TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
{% endif %} # {% endif %}
[gcode_macro M190] # [gcode_macro M190]
rename_existing: M99190 # rename_existing: M99190
gcode: # gcode:
#Parameters # #Parameters
{% set s = params.S|float %} # {% set s = params.S|float %}
M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp # M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp
{% if s != 0 %} # {% if s != 0 %}
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree) # TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree)
{% endif %} # {% endif %}
[gcode_macro PURGE_LINE] [gcode_macro PURGE_LINE]
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt # https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt

8
printer.cfg
View File

@@ -34,7 +34,7 @@ square_corner_velocity: 8.0
step_pin: PC2 step_pin: PC2
dir_pin: !PB9 dir_pin: !PB9
enable_pin: !PC3 enable_pin: !PC3
microsteps: 64 microsteps: 128
rotation_distance: 40 rotation_distance: 40
endstop_pin: tmc2209_stepper_x:virtual_endstop endstop_pin: tmc2209_stepper_x:virtual_endstop
position_endstop: 0 position_endstop: 0
@@ -56,7 +56,7 @@ diag_pin: PA5
step_pin: PB8 step_pin: PB8
dir_pin: PB7 dir_pin: PB7
enable_pin: !PC3 enable_pin: !PC3
microsteps: 64 microsteps: 128
rotation_distance: 40 rotation_distance: 40
endstop_pin: tmc2209_stepper_y:virtual_endstop endstop_pin: tmc2209_stepper_y:virtual_endstop
position_endstop: 0 position_endstop: 0
@@ -78,7 +78,7 @@ diag_pin: PA6
step_pin: PB6 step_pin: PB6
dir_pin: !PB5 dir_pin: !PB5
enable_pin: !PC3 enable_pin: !PC3
microsteps: 64 microsteps: 128
rotation_distance: 4 rotation_distance: 4
endstop_pin: probe:z_virtual_endstop endstop_pin: probe:z_virtual_endstop
position_min: -3 position_min: -3
@@ -102,7 +102,7 @@ diag_pin: PA7
step_pin: PB4 step_pin: PB4
dir_pin: !PB3 dir_pin: !PB3
enable_pin: !PC3 enable_pin: !PC3
microsteps: 64 microsteps: 128
rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750