diff --git a/cfgs/misc-macros.cfg b/cfgs/misc-macros.cfg
index c32bc88..908ae49 100644
--- a/cfgs/misc-macros.cfg
+++ b/cfgs/misc-macros.cfg
@@ -52,27 +52,27 @@ gcode:
         SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
     {% endif %}
 
-[gcode_macro M109]
-rename_existing: M99109
-gcode:
-    #Parameters
-    {% set s = params.S|float %}
+# [gcode_macro M109]
+# rename_existing: M99109
+# gcode:
+#     #Parameters
+#     {% set s = params.S|float %}
     
-    M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
-    {% if s != 0 %}
-        TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
-    {% endif %}
+#     M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
+#     {% if s != 0 %}
+#         TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
+#     {% endif %}
 
-[gcode_macro M190]
-rename_existing: M99190
-gcode:
-    #Parameters
-    {% set s = params.S|float %}
+# [gcode_macro M190]
+# rename_existing: M99190
+# gcode:
+#     #Parameters
+#     {% set s = params.S|float %}
 
-    M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
-    {% if s != 0 %}
-        TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
-    {% endif %}
+#     M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
+#     {% if s != 0 %}
+#         TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
+#     {% endif %}
 
 [gcode_macro PURGE_LINE]
 # https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
diff --git a/printer.cfg b/printer.cfg
index 334b567..bdf41d0 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -34,7 +34,7 @@ square_corner_velocity: 8.0
 step_pin: PC2
 dir_pin: !PB9
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_x:virtual_endstop
 position_endstop: 0
@@ -56,7 +56,7 @@ diag_pin: PA5
 step_pin: PB8
 dir_pin: PB7
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_y:virtual_endstop
 position_endstop: 0
@@ -78,7 +78,7 @@ diag_pin: PA6
 step_pin: PB6
 dir_pin: !PB5
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 4
 endstop_pin: probe:z_virtual_endstop
 position_min: -3
@@ -102,7 +102,7 @@ diag_pin: PA7
 step_pin: PB4
 dir_pin: !PB3
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html
 nozzle_diameter: 0.400
 filament_diameter: 1.750