PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Pulling in minor changes in misc-macros.cfg.

Browse Source
This commit is contained in:
Bassam Husain
2023-07-01 02:00:06 -04:00
parent cd16791901
commit 3a6dab44e0
1 changed files with 3 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
cfgs/misc-macros.cfg
View File

@@ -32,6 +32,7 @@ variable_beeping_enabled: 0 # NOTE Enable(1) or disable(0) beeping everywhere ex
variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
variable_pre_purge_prime_length: 1.40 variable_pre_purge_prime_length: 1.40
gcode: gcode:
# DELETEME This section is unnecessary
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length } SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled } SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled } SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
@@ -88,10 +89,7 @@ gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %} {% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1 ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# Get Boundaries # Misc variables
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
{% set extrudeAmount = 26.6 %} {% set extrudeAmount = 26.6 %}
{% set movementLength = 100.0 %} {% set movementLength = 100.0 %}
{% set movementSpeed = 15 * 60 %} {% set movementSpeed = 15 * 60 %}
@@ -109,7 +107,7 @@ gcode:
M83 ; Relative extrusion mode M83 ; Relative extrusion mode
G1 E{PRE_PURGE_PRIME_LENGTH} F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT G1 E{PRE_PURGE_PRIME_LENGTH} F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed} ; intro line 1 G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed} ; intro line 1
#G1 E-.5 F2100 # Retract
G92 E0.0 ; reset extruder G92 E0.0 ; reset extruder
M82 ; Absolute extrusion mode M82 ; Absolute extrusion mode
G1 Z5.0 ; move nozzle to prevent scratch G1 Z5.0 ; move nozzle to prevent scratch