PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust config bundles.

Browse Source
This commit is contained in:
Bassam Husain
2023-11-23 14:07:41 -05:00
parent db93adb507
commit 360c9eff51
2 changed files with 6 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
misc/PrusaSlicer_config_bundle-SV06-Both.ini
View File

@@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-20 at 02:32:36 UTC # generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-23 at 18:53:35 UTC
[print:0.20mm QUALITY SV06 Ellis] [print:0.20mm QUALITY SV06 Ellis]
avoid_crossing_curled_overhangs = 0 avoid_crossing_curled_overhangs = 0
@@ -2610,7 +2610,7 @@ retract_restart_extra_toolchange = 0
retract_speed = 40 retract_speed = 40
silent_mode = 0 silent_mode = 0
single_extruder_multi_material = 0 single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND") start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
template_custom_gcode = template_custom_gcode =
thumbnails = 32x32,400x300 thumbnails = 32x32,400x300
thumbnails_format = PNG thumbnails_format = PNG
@@ -2691,7 +2691,7 @@ retract_restart_extra_toolchange = 0
retract_speed = 40 retract_speed = 40
silent_mode = 0 silent_mode = 0
single_extruder_multi_material = 0 single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND") start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
template_custom_gcode = template_custom_gcode =
thumbnails = 32x32,400x300 thumbnails = 32x32,400x300
thumbnails_format = PNG thumbnails_format = PNG

6
misc/SuperSlicer_config_bundle-SV06-Both.ini
View File

@@ -1,4 +1,4 @@
# generated by SuperSlicer 2.4 on 2023-08-23 at 23:28:35 UTC # generated by SuperSlicer 2.4 on 2023-11-23 at 19:03:00 UTC
[print:Ellis_Decorative_45_Degree_15mm3] [print:Ellis_Decorative_45_Degree_15mm3]
allow_empty_layers = 0 allow_empty_layers = 0
@@ -3707,7 +3707,7 @@ retract_speed = 40
seam_gap = 15% seam_gap = 15%
silent_mode = 0 silent_mode = 0
single_extruder_multi_material = 0 single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
start_gcode_manual = 0 start_gcode_manual = 0
template_custom_gcode = template_custom_gcode =
thumbnails = 32x32,400x300 thumbnails = 32x32,400x300
@@ -3832,7 +3832,7 @@ retract_speed = 40
seam_gap = 15% seam_gap = 15%
silent_mode = 0 silent_mode = 0
single_extruder_multi_material = 0 single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
start_gcode_manual = 0 start_gcode_manual = 0
template_custom_gcode = template_custom_gcode =
thumbnails = 32x32,400x300 thumbnails = 32x32,400x300