From 360c9eff5129ccf5bf8fe135e4b26b50d04b76eb Mon Sep 17 00:00:00 2001 From: Bassam Husain Date: Thu, 23 Nov 2023 14:07:41 -0500 Subject: [PATCH] Adjust config bundles. --- misc/PrusaSlicer_config_bundle-SV06-Both.ini | 6 +++--- misc/SuperSlicer_config_bundle-SV06-Both.ini | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/misc/PrusaSlicer_config_bundle-SV06-Both.ini b/misc/PrusaSlicer_config_bundle-SV06-Both.ini index 00e687a..ce24ab9 100644 --- a/misc/PrusaSlicer_config_bundle-SV06-Both.ini +++ b/misc/PrusaSlicer_config_bundle-SV06-Both.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-20 at 02:32:36 UTC +# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-23 at 18:53:35 UTC [print:0.20mm QUALITY SV06 Ellis] avoid_crossing_curled_overhangs = 0 @@ -2610,7 +2610,7 @@ retract_restart_extra_toolchange = 0 retract_speed = 40 silent_mode = 0 single_extruder_multi_material = 0 -start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND") +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code template_custom_gcode = thumbnails = 32x32,400x300 thumbnails_format = PNG @@ -2691,7 +2691,7 @@ retract_restart_extra_toolchange = 0 retract_speed = 40 silent_mode = 0 single_extruder_multi_material = 0 -start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND") +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code template_custom_gcode = thumbnails = 32x32,400x300 thumbnails_format = PNG diff --git a/misc/SuperSlicer_config_bundle-SV06-Both.ini b/misc/SuperSlicer_config_bundle-SV06-Both.ini index 717e60a..c31c8a2 100644 --- a/misc/SuperSlicer_config_bundle-SV06-Both.ini +++ b/misc/SuperSlicer_config_bundle-SV06-Both.ini @@ -1,4 +1,4 @@ -# generated by SuperSlicer 2.4 on 2023-08-23 at 23:28:35 UTC +# generated by SuperSlicer 2.4 on 2023-11-23 at 19:03:00 UTC [print:Ellis_Decorative_45_Degree_15mm3] allow_empty_layers = 0 @@ -3707,7 +3707,7 @@ retract_speed = 40 seam_gap = 15% silent_mode = 0 single_extruder_multi_material = 0 -start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code start_gcode_manual = 0 template_custom_gcode = thumbnails = 32x32,400x300 @@ -3832,7 +3832,7 @@ retract_speed = 40 seam_gap = 15% silent_mode = 0 single_extruder_multi_material = 0 -start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code start_gcode_manual = 0 template_custom_gcode = thumbnails = 32x32,400x300