PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-09 05:51:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

RP2040 adxl345 working. Input shaper values adjusted.

Browse Source
This commit is contained in:
Bassam Husain
2023-02-16 18:55:08 -05:00
parent 9ed8bf2ced
commit 2b33f079b3
2 changed files with 16 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
cfgs/adxl-rp2040.cfg
View File

@@ -3,20 +3,23 @@
# https://www.klipper3d.org/Measuring_Resonances.html#adxl345 # https://www.klipper3d.org/Measuring_Resonances.html#adxl345
##################################################################### #####################################################################
[mcu rp2040] [mcu RP2040]
baud: 115200 # 250000 baud: 115200 # 250000
restart_method: command restart_method: command
# Obtain definition by "ls -l /dev/serial/by-id/" # Obtain definition by "ls -l /dev/serial/by-id/"
serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00 serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
[adxl345] [adxl345]
spi_software_miso_pin: rp2040:gpio8 axes_map: x,z,y # Installed with vertical ADXL # For Diamond in X, y, z
cs_pin: rp2040:gpio9
# spi_bus: spi0b # RP2040
spi_software_sclk_pin: rp2040:gpio10 cs_pin: RP2040:gpio1 #RP2040:gpio1
spi_software_mosi_pin: rp2040:gpio11 spi_bus: spi0a # spi0a
axes_map: x,y,z
[resonance_tester] [resonance_tester]
accel_chip: adxl345 accel_chip: adxl345
probe_points: 111.5, 111.5, 20 probe_points: 111.5, 111.5, 20
[gcode_macro ADX]
gcode:
ACCELEROMETER_QUERY # check ADXL345

10
printer.cfg
View File

@@ -14,7 +14,7 @@
[include ./cfgs/beeper.cfg] [include ./cfgs/beeper.cfg]
# NOTE Uncomment the ONE of the following lines if you're using an adxl345 # NOTE Uncomment the ONE of the following lines if you're using an adxl345
# [include ./cfgs/adxl-rp2040.cfg] [include ./cfgs/adxl-rp2040.cfg]
# [include ./cfgs/adxl-direct.cfg] # [include ./cfgs/adxl-direct.cfg]
[mcu] [mcu]
@@ -168,10 +168,10 @@ encoder_pins: ^PB14, ^PB10
click_pin: ^!PB2 click_pin: ^!PB2
[input_shaper] [input_shaper]
shaper_freq_x = 56.0 shaper_freq_x = 102.2
shaper_type_x: mzv shaper_type_x: 3hump_ei # mzv
shaper_freq_y = 59.0 shaper_freq_y = 41.8 # 59.0
shaper_type_y: 3hump_ei shaper_type_y: mzv # 3hump_ei
[bed_screws] [bed_screws]
screw1: 26.5, 31 screw1: 26.5, 31