PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Minor adjustments to instructions.

Browse Source
This commit is contained in:
bassamanator
2024-01-14 20:34:24 -05:00
parent 7903f7c253
commit 1386f83240
1 changed files with 10 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
README.md
View File

@@ -125,10 +125,10 @@ Please note:
### Download OSS Klipper Configuration
You can choose _either_ of the 2 following methods.
#### Method 1: Clone the Repository
💡 Make sure `git` is installed (`sudo apt update && sudo apt install git`).
1. `cd ~/printer_data/config`
2. Empty entire `~/printer_data/config` folder.
- In linux, you can delete files via `rm fileName` and directories via `rmdir directoryName`.
@@ -148,6 +148,8 @@ You can choose _either_ of the 2 following methods.
### Adjust Configuration with MCU Path
💡 Make sure the host and printer are connected via USB.
1. Find what port the `mcu` (printer motherboard) is connected to via **one** of the following commands:
- `ls /dev/serial/by-id/*`
@@ -159,7 +161,7 @@ You can choose _either_ of the 2 following methods.
2. Adjust the `[mcu]` section in `printer.cfg` accordingly.
```yaml
# 🗒️ This is just an example
# 📝 This is just an example
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
restart_method: command
@@ -183,7 +185,7 @@ If the Klipper flash that you did earlier was successful, and you've done everyt
💡 I recommend no filament be loaded for any of these steps.
🗒️ You will be pasting/typing these commands into the `Mainsail`/`Fluidd` console.
📝 You will be pasting/typing these commands into the `Mainsail`/`Fluidd` console.
1. Check to see if `X` and `Y` max positions can be reached, and adjust `position_max`, if necessary. You might be able to go further, which is great, but I recommend leaving a 2mm gap for safety.
1. `G28`
@@ -214,7 +216,7 @@ But first, adjust your slicer.
## Adjust Your Slicer
🗒️ If you are using the config bundles found on this repo, you can skip this section.
📝 If you are using the config bundles found on this repo, you can skip this section.
### Start G-Code
@@ -234,7 +236,7 @@ If you would like to print a purge line before your print starts, at the end of
- `LINE_PURGE`; prints KAMP's purge line. ⚠️ Do not attempt to use without reading [this section](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging).
```yaml
# 🗒️ This is just an example Start G-Code
# 📝 This is just an example Start G-Code
PRINT_START ...
PURGE_LINE
```
@@ -355,9 +357,9 @@ The printhead is now parked front center waiting for you to insert filament. You
⚠️ If KAMP is disabled, and there is no `default` mesh, `PRINT_START` will crash.
🗒️ The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-objects#enable-the-label-objects-setting-in-your-slicer) in your slicer must be enabled for KAMP to work.
📝 The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-objects#enable-the-label-objects-setting-in-your-slicer) in your slicer must be enabled for KAMP to work.
🗒️ `LINE_PURGE` is useable (on appropriate devices) even if KAMP is disabled.
📝 `LINE_PURGE` is useable (on appropriate devices) even if KAMP is disabled.
This repo contains all the code from the KAMP repository, however, only the `adaptive meshing` and `LINE_PURGE` functionality of KAMP has been configured and tested for use. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`.