Added 2017-2018 mars rover repository.

OSU Robotics Club/Mars Rover 2017-2018/software/firmware/tower_pan_tilt/tower_pan_tilt.ino

@@ -0,0 +1,153 @@
+////////// Includes //////////
+#include <ModbusRtu.h>
+#include <Servo.h>
+
+////////// Hardware / Data Enumerations //////////
+enum HARDWARE {
+  RS485_EN = 2,
+  RS485_RX = 7,
+  RS485_TX = 8,
+
+  SERVO_PAN = 5,
+  SERVO_TILT = 4,
+
+  LED_RED = 1,
+  LED_GREEN = 32,
+  LED_BLUE = 6,
+
+  LED_BLUE_EXTRA = 13
+};
+
+enum MODBUS_REGISTERS {
+  CENTER_ALL = 0,           // Input/Output
+  PAN_ADJUST_POSITIVE = 1,  // Input/Output
+  PAN_ADJUST_NEGATIVE = 2,  // Input/Output
+  TILT_ADJUST_POSITIVE = 3, // Input/Output
+  TILT_ADJUST_NEGATIVE = 4, // Input/Output
+};
+
+////////// Global Variables //////////
+const uint8_t node_id = 2;
+const uint8_t mobus_serial_port_number = 3;
+
+uint16_t modbus_data[] = {0, 0, 0, 0, 0};
+uint8_t num_modbus_registers = 0;
+
+int8_t poll_state = 0;
+bool communication_good = false;
+uint8_t message_count = 0;
+
+// Pan/tilt hard limits
+const int pan_min = 1470;
+const int pan_center = 1605;
+const int pan_max = 1725;
+
+const int tilt_min = 1020;
+const int tilt_center = 1820;
+const int tilt_max = 2400;
+
+// Pan/tilt positions
+int pan_position = pan_center;
+int tilt_position = tilt_center;
+
+////////// Class Instantiations //////////
+Modbus slave(node_id, mobus_serial_port_number, HARDWARE::RS485_EN);
+
+Servo pan_servo;
+Servo tilt_servo;
+
+void setup() {
+ Serial.begin(9600);
+//  while(!Serial);
+  setup_hardware();
+
+  num_modbus_registers = sizeof(modbus_data) / sizeof(modbus_data[0]);
+
+  slave.begin(115200);
+  slave.setTimeOut(150);
+
+}
+
+void loop() {
+  poll_modbus();
+  set_leds();
+  set_pan_tilt_adjustments();
+}
+
+void setup_hardware() {
+  // Setup pins as inputs / outputs
+  pinMode(HARDWARE::RS485_EN, OUTPUT);
+
+  pinMode(HARDWARE::SERVO_PAN, OUTPUT);
+  pinMode(HARDWARE::SERVO_TILT, OUTPUT);
+
+  pan_servo.attach(HARDWARE::SERVO_PAN);
+  tilt_servo.attach(HARDWARE::SERVO_TILT);
+
+  pan_servo.writeMicroseconds(pan_center);
+  tilt_servo.writeMicroseconds(tilt_center);
+
+  pinMode(HARDWARE::LED_RED, OUTPUT);
+  pinMode(HARDWARE::LED_GREEN, OUTPUT);
+  pinMode(HARDWARE::LED_BLUE, OUTPUT);
+
+  pinMode(HARDWARE::LED_BLUE_EXTRA, OUTPUT);
+
+  // Set default pin states
+  digitalWrite(HARDWARE::LED_RED, LOW);
+  digitalWrite(HARDWARE::LED_GREEN, HIGH);
+  digitalWrite(HARDWARE::LED_BLUE, HIGH);
+
+  digitalWrite(HARDWARE::LED_BLUE_EXTRA, LOW);
+}
+
+void poll_modbus() {
+  poll_state = slave.poll(modbus_data, num_modbus_registers);
+  communication_good = !slave.getTimeOutState();
+}
+
+void set_leds() {
+  if (poll_state > 4) {
+    message_count++;
+    if (message_count > 2) {
+      digitalWrite(HARDWARE::LED_BLUE_EXTRA, !digitalRead(HARDWARE::LED_BLUE_EXTRA));
+      message_count = 0;
+    }
+
+    digitalWrite(HARDWARE::LED_GREEN, LOW);
+    digitalWrite(HARDWARE::LED_RED, HIGH);
+  } else if (!communication_good) {
+    digitalWrite(HARDWARE::LED_BLUE_EXTRA, LOW);
+    digitalWrite(HARDWARE::LED_GREEN, HIGH);
+    digitalWrite(HARDWARE::LED_RED, LOW);
+  }
+}
+
+void set_pan_tilt_adjustments() {
+  if (communication_good) {
+    if (modbus_data[MODBUS_REGISTERS::CENTER_ALL]) {
+      pan_servo.writeMicroseconds(constrain(pan_position, pan_min, pan_max));
+      tilt_servo.writeMicroseconds(constrain(tilt_position, tilt_min, tilt_max));
+
+      pan_position = pan_center;
+      tilt_position = tilt_center;
+
+      modbus_data[MODBUS_REGISTERS::CENTER_ALL] = 0;
+    }
+
+    pan_position = constrain(pan_position - modbus_data[MODBUS_REGISTERS::PAN_ADJUST_POSITIVE] + modbus_data[MODBUS_REGISTERS::PAN_ADJUST_NEGATIVE], pan_min, pan_max);
+    tilt_position = constrain(tilt_position + modbus_data[MODBUS_REGISTERS::TILT_ADJUST_POSITIVE] - modbus_data[MODBUS_REGISTERS::TILT_ADJUST_NEGATIVE], tilt_min, tilt_max);
+
+    pan_servo.writeMicroseconds(pan_position);
+    tilt_servo.writeMicroseconds(tilt_position);
+
+//    Serial.print(pan_position);
+//    Serial.print("\t");
+//    Serial.println(tilt_position);
+
+    modbus_data[MODBUS_REGISTERS::PAN_ADJUST_POSITIVE] = 0;
+    modbus_data[MODBUS_REGISTERS::PAN_ADJUST_NEGATIVE] = 0;
+    modbus_data[MODBUS_REGISTERS::TILT_ADJUST_POSITIVE] = 0;
+    modbus_data[MODBUS_REGISTERS::TILT_ADJUST_NEGATIVE] = 0;
+  }
+}