From 8ea055ca387ae7853306ffc028cf626a22f173ac Mon Sep 17 00:00:00 2001 From: Corwin Perren Date: Fri, 3 Nov 2017 00:02:51 -0700 Subject: [PATCH] Updated user stories. Fixed grammar and spelling. --- .../requirements/IEEEtran.cls | 6347 ++++++++++++ cs_capstone_documents/requirements/latexmk.pl | 8802 +++++++++++++++++ cs_capstone_documents/requirements/latexmkrc | 31 + cs_capstone_documents/requirements/makefile | 18 + .../requirements/requirements.tex | 331 +- 5 files changed, 15403 insertions(+), 126 deletions(-) create mode 100644 cs_capstone_documents/requirements/IEEEtran.cls create mode 100644 cs_capstone_documents/requirements/latexmk.pl create mode 100644 cs_capstone_documents/requirements/latexmkrc create mode 100644 cs_capstone_documents/requirements/makefile diff --git a/cs_capstone_documents/requirements/IEEEtran.cls b/cs_capstone_documents/requirements/IEEEtran.cls new file mode 100644 index 0000000..8d2b1c6 --- /dev/null +++ b/cs_capstone_documents/requirements/IEEEtran.cls @@ -0,0 +1,6347 @@ +%% +%% IEEEtran.cls 2015/08/26 version V1.8b +%% +%% This is the IEEEtran LaTeX class for authors of the Institute of +%% Electrical and Electronics Engineers (IEEE) Transactions journals and +%% conferences. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/pkg/ieeetran +%% and +%% http://www.ieee.org/ +%% +%% Based on the original 1993 IEEEtran.cls, but with many bug fixes +%% and enhancements (from both JVH and MDS) over the 1996/7 version. +%% +%% +%% Contributors: +%% Gerry Murray (1993), Silvano Balemi (1993), +%% Jon Dixon (1996), Peter N"uchter (1996), +%% Juergen von Hagen (2000), and Michael Shell (2001-2014) +%% +%% +%% Copyright (c) 1993-2000 by Gerry Murray, Silvano Balemi, +%% Jon Dixon, Peter N"uchter, +%% Juergen von Hagen +%% and +%% Copyright (c) 2001-2015 by Michael Shell +%% +%% Current maintainer (V1.3 to V1.8b): Michael Shell +%% See: +%% http://www.michaelshell.org/ +%% for current contact information. +%% +%% Special thanks to Peter Wilson (CUA) and Donald Arseneau +%% for allowing the inclusion of the \@ifmtarg command +%% from their ifmtarg LaTeX package. +%% +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall the IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_conf_compsoc.tex, +%% bare_jrnl_compsoc.tex +%% +%% Major changes to the user interface should be indicated by an +%% increase in the version numbers. If a version is a beta, it will +%% be indicated with a BETA suffix, i.e., 1.4 BETA. +%% Small changes can be indicated by appending letters to the version +%% such as "IEEEtran_v14a.cls". +%% In all cases, \Providesclass, any \typeout messages to the user, +%% \IEEEtransversionmajor and \IEEEtransversionminor must reflect the +%% correct version information. +%% The changes should also be documented via source comments. +%%************************************************************************* +%% +% +% Available class options +% e.g., \documentclass[10pt,conference]{IEEEtran} +% +% *** choose only one from each category *** +% +% 9pt, 10pt, 11pt, 12pt +% Sets normal font size. The default is 10pt. +% +% conference, journal, technote, peerreview, peerreviewca +% determines format mode - conference papers, journal papers, +% correspondence papers (technotes), or peer review papers. The user +% should also select 9pt when using technote. peerreview is like +% journal mode, but provides for a single-column "cover" title page for +% anonymous peer review. The paper title (without the author names) is +% repeated at the top of the page after the cover page. For peer review +% papers, the \IEEEpeerreviewmaketitle command must be executed (will +% automatically be ignored for non-peerreview modes) at the place the +% cover page is to end, usually just after the abstract (keywords are +% not normally used with peer review papers). peerreviewca is like +% peerreview, but allows the author names to be entered and formatted +% as with conference mode so that author affiliation and contact +% information can be easily seen on the cover page. +% The default is journal. +% +% draft, draftcls, draftclsnofoot, final +% determines if paper is formatted as a widely spaced draft (for +% handwritten editor comments) or as a properly typeset final version. +% draftcls restricts draft mode to the class file while all other LaTeX +% packages (i.e., \usepackage{graphicx}) will behave as final - allows +% for a draft paper with visible figures, etc. draftclsnofoot is like +% draftcls, but does not display the date and the word "DRAFT" at the foot +% of the pages. If using one of the draft modes, the user will probably +% also want to select onecolumn. +% The default is final. +% +% letterpaper, a4paper, cspaper +% determines paper size: 8.5in X 11in, 210mm X 297mm or 7.875in X 10.75in. +% Changing the paper size in the standard journal and conference modes +% will not alter the typesetting of the document - only the margins will +% be affected. In particular, documents using the a4paper option will +% have reduced side margins (A4 is narrower than US letter) and a longer +% bottom margin (A4 is longer than US letter). For both cases, the top +% margins will be the same and the text will be horizontally centered. +% For the compsoc conference and draft modes, it is the margins that will +% remain constant, and thus the text area size will vary, with changes in +% the paper size. +% The cspaper option is the special ``trim'' paper size (7.875in x 10.75in) +% used in the actual publication of Computer Society journals. Under +% compsoc journal mode, this option does not alter the typesetting of the +% document. Authors should invoke the cspaper option only if requested to +% do so by the editors of the specific journal they are submitting to. +% For final submission to the IEEE, authors should generally use US letter +% (8.5 X 11in) paper unless otherwise instructed. Note that authors should +% ensure that all post-processing (ps, pdf, etc.) uses the same paper +% specificiation as the .tex document. Problems here are by far the number +% one reason for incorrect margins. IEEEtran will automatically set the +% default paper size under pdflatex (without requiring any change to +% pdftex.cfg), so this issue is more important to dvips users. Fix +% config.ps, config.pdf, or ~/.dvipsrc for dvips, or use the +% dvips -t papersize option instead as needed. For the cspaper option, +% the corresponding dvips paper name is "ieeecs". +% See the testflow documentation +% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/testflow +% for more details on dvips paper size configuration. +% The default is letterpaper. +% +% oneside, twoside +% determines if layout follows single sided or two sided (duplex) +% printing. The only notable change is with the headings at the top of +% the pages. +% The default is oneside. +% +% onecolumn, twocolumn +% determines if text is organized into one or two columns per page. One +% column mode is usually used only with draft papers. +% The default is twocolumn. +% +% comsoc, compsoc, transmag +% Use the format of the IEEE Communications Society, IEEE Computer Society +% or IEEE Transactions on Magnetics, respectively. +% +% romanappendices +% Use the "Appendix I" convention when numbering appendices. IEEEtran.cls +% now defaults to Alpha "Appendix A" convention - the opposite of what +% v1.6b and earlier did. +% +% captionsoff +% disables the display of the figure/table captions. Some IEEE journals +% request that captions be removed and figures/tables be put on pages +% of their own at the end of an initial paper submission. The endfloat +% package can be used with this class option to achieve this format. +% +% nofonttune +% turns off tuning of the font interword spacing. Maybe useful to those +% not using the standard Times fonts or for those who have already "tuned" +% their fonts. +% The default is to enable IEEEtran to tune font parameters. +% +% +%---------- +% Available CLASSINPUTs provided (all are macros unless otherwise noted): +% \CLASSINPUTbaselinestretch +% \CLASSINPUTinnersidemargin +% \CLASSINPUToutersidemargin +% \CLASSINPUTtoptextmargin +% \CLASSINPUTbottomtextmargin +% +% Available CLASSINFOs provided: +% \ifCLASSINFOpdf (TeX if conditional) +% \CLASSINFOpaperwidth (macro) +% \CLASSINFOpaperheight (macro) +% \CLASSINFOnormalsizebaselineskip (length) +% \CLASSINFOnormalsizeunitybaselineskip (length) +% +% Available CLASSOPTIONs provided: +% all class option flags (TeX if conditionals) unless otherwise noted, +% e.g., \ifCLASSOPTIONcaptionsoff +% point size options provided as a single macro: +% \CLASSOPTIONpt +% which will be defined as 9, 10, 11, or 12 depending on the document's +% normalsize point size. +% also, class option peerreviewca implies the use of class option peerreview +% and classoption draft implies the use of class option draftcls + + + + + +\ProvidesClass{IEEEtran}[2015/08/26 V1.8b by Michael Shell] +\typeout{-- See the "IEEEtran_HOWTO" manual for usage information.} +\typeout{-- http://www.michaelshell.org/tex/ieeetran/} +\NeedsTeXFormat{LaTeX2e} + +% IEEEtran.cls version numbers, provided as of V1.3 +% These values serve as a way a .tex file can +% determine if the new features are provided. +% The version number of this IEEEtrans.cls can be obtained from +% these values. i.e., V1.4 +% KEEP THESE AS INTEGERS! i.e., NO {4a} or anything like that- +% (no need to enumerate "a" minor changes here) +\def\IEEEtransversionmajor{1} +\def\IEEEtransversionminor{8} + + +% hook to allow easy changeover to IEEEtran.cls/tools.sty error reporting +\def\@IEEEclspkgerror{\ClassError{IEEEtran}} + + +% These do nothing, but provide them like in article.cls +\newif\if@restonecol +\newif\if@titlepage + + +% class option conditionals +\newif\ifCLASSOPTIONonecolumn \CLASSOPTIONonecolumnfalse +\newif\ifCLASSOPTIONtwocolumn \CLASSOPTIONtwocolumntrue + +\newif\ifCLASSOPTIONoneside \CLASSOPTIONonesidetrue +\newif\ifCLASSOPTIONtwoside \CLASSOPTIONtwosidefalse + +\newif\ifCLASSOPTIONfinal \CLASSOPTIONfinaltrue +\newif\ifCLASSOPTIONdraft \CLASSOPTIONdraftfalse +\newif\ifCLASSOPTIONdraftcls \CLASSOPTIONdraftclsfalse +\newif\ifCLASSOPTIONdraftclsnofoot \CLASSOPTIONdraftclsnofootfalse + +\newif\ifCLASSOPTIONpeerreview \CLASSOPTIONpeerreviewfalse +\newif\ifCLASSOPTIONpeerreviewca \CLASSOPTIONpeerreviewcafalse + +\newif\ifCLASSOPTIONjournal \CLASSOPTIONjournaltrue +\newif\ifCLASSOPTIONconference \CLASSOPTIONconferencefalse +\newif\ifCLASSOPTIONtechnote \CLASSOPTIONtechnotefalse + +\newif\ifCLASSOPTIONnofonttune \CLASSOPTIONnofonttunefalse + +\newif\ifCLASSOPTIONcaptionsoff \CLASSOPTIONcaptionsofffalse + +\newif\ifCLASSOPTIONcomsoc \CLASSOPTIONcomsocfalse +\newif\ifCLASSOPTIONcompsoc \CLASSOPTIONcompsocfalse +\newif\ifCLASSOPTIONtransmag \CLASSOPTIONtransmagfalse + +\newif\ifCLASSOPTIONromanappendices \CLASSOPTIONromanappendicesfalse + + +% class info conditionals + +% indicates if pdf (via pdflatex) output +\newif\ifCLASSINFOpdf \CLASSINFOpdffalse + + +% V1.6b internal flag to show if using a4paper +\newif\if@IEEEusingAfourpaper \@IEEEusingAfourpaperfalse +% V1.6b internal flag to show if using cspaper +\newif\if@IEEEusingcspaper \@IEEEusingcspaperfalse + + +% IEEEtran class scratch pad registers +% dimen +\newdimen\@IEEEtrantmpdimenA +\newdimen\@IEEEtrantmpdimenB +\newdimen\@IEEEtrantmpdimenC +% count +\newcount\@IEEEtrantmpcountA +\newcount\@IEEEtrantmpcountB +\newcount\@IEEEtrantmpcountC +% token list +\newtoks\@IEEEtrantmptoksA + +% we use \CLASSOPTIONpt so that we can ID the point size (even for 9pt docs) +% as well as LaTeX's \@ptsize to retain some compatability with some +% external packages +\def\@ptsize{0} +% LaTeX does not support 9pt, so we set \@ptsize to 0 - same as that of 10pt +\DeclareOption{9pt}{\def\CLASSOPTIONpt{9}\def\@ptsize{0}} +\DeclareOption{10pt}{\def\CLASSOPTIONpt{10}\def\@ptsize{0}} +\DeclareOption{11pt}{\def\CLASSOPTIONpt{11}\def\@ptsize{1}} +\DeclareOption{12pt}{\def\CLASSOPTIONpt{12}\def\@ptsize{2}} + + + +\DeclareOption{letterpaper}{\setlength{\paperwidth}{8.5in}% + \setlength{\paperheight}{11in}% + \@IEEEusingAfourpaperfalse + \@IEEEusingcspaperfalse + \def\CLASSOPTIONpaper{letter}% + \def\CLASSINFOpaperwidth{8.5in}% + \def\CLASSINFOpaperheight{11in}} + + +\DeclareOption{a4paper}{\setlength{\paperwidth}{210mm}% + \setlength{\paperheight}{297mm}% + \@IEEEusingAfourpapertrue + \@IEEEusingcspaperfalse + \def\CLASSOPTIONpaper{a4}% + \def\CLASSINFOpaperwidth{210mm}% + \def\CLASSINFOpaperheight{297mm}} + +% special paper option for compsoc journals +\DeclareOption{cspaper}{\setlength{\paperwidth}{7.875in}% + \setlength{\paperheight}{10.75in}% + \@IEEEusingcspapertrue + \@IEEEusingAfourpaperfalse + \def\CLASSOPTIONpaper{ieeecs}% + \def\CLASSINFOpaperwidth{7.875in}% + \def\CLASSINFOpaperheight{10.75in}} + +\DeclareOption{oneside}{\@twosidefalse\@mparswitchfalse + \CLASSOPTIONonesidetrue\CLASSOPTIONtwosidefalse} +\DeclareOption{twoside}{\@twosidetrue\@mparswitchtrue + \CLASSOPTIONtwosidetrue\CLASSOPTIONonesidefalse} + +\DeclareOption{onecolumn}{\CLASSOPTIONonecolumntrue\CLASSOPTIONtwocolumnfalse} +\DeclareOption{twocolumn}{\CLASSOPTIONtwocolumntrue\CLASSOPTIONonecolumnfalse} + +% If the user selects draft, then this class AND any packages +% will go into draft mode. +\DeclareOption{draft}{\CLASSOPTIONdrafttrue\CLASSOPTIONdraftclstrue + \CLASSOPTIONdraftclsnofootfalse} +% draftcls is for a draft mode which will not affect any packages +% used by the document. +\DeclareOption{draftcls}{\CLASSOPTIONdraftfalse\CLASSOPTIONdraftclstrue + \CLASSOPTIONdraftclsnofootfalse} +% draftclsnofoot is like draftcls, but without the footer. +\DeclareOption{draftclsnofoot}{\CLASSOPTIONdraftfalse\CLASSOPTIONdraftclstrue + \CLASSOPTIONdraftclsnofoottrue} +\DeclareOption{final}{\CLASSOPTIONdraftfalse\CLASSOPTIONdraftclsfalse + \CLASSOPTIONdraftclsnofootfalse} + +\DeclareOption{journal}{\CLASSOPTIONpeerreviewfalse\CLASSOPTIONpeerreviewcafalse + \CLASSOPTIONjournaltrue\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotefalse} + +\DeclareOption{conference}{\CLASSOPTIONpeerreviewfalse\CLASSOPTIONpeerreviewcafalse + \CLASSOPTIONjournalfalse\CLASSOPTIONconferencetrue\CLASSOPTIONtechnotefalse} + +\DeclareOption{technote}{\CLASSOPTIONpeerreviewfalse\CLASSOPTIONpeerreviewcafalse + \CLASSOPTIONjournalfalse\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotetrue} + +\DeclareOption{peerreview}{\CLASSOPTIONpeerreviewtrue\CLASSOPTIONpeerreviewcafalse + \CLASSOPTIONjournalfalse\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotefalse} + +\DeclareOption{peerreviewca}{\CLASSOPTIONpeerreviewtrue\CLASSOPTIONpeerreviewcatrue + \CLASSOPTIONjournalfalse\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotefalse} + +\DeclareOption{nofonttune}{\CLASSOPTIONnofonttunetrue} + +\DeclareOption{captionsoff}{\CLASSOPTIONcaptionsofftrue} + +\DeclareOption{comsoc}{\CLASSOPTIONcomsoctrue\CLASSOPTIONcompsocfalse\CLASSOPTIONtransmagfalse} + +\DeclareOption{compsoc}{\CLASSOPTIONcomsocfalse\CLASSOPTIONcompsoctrue\CLASSOPTIONtransmagfalse} + +\DeclareOption{transmag}{\CLASSOPTIONtransmagtrue\CLASSOPTIONcomsocfalse\CLASSOPTIONcompsocfalse} + +\DeclareOption{romanappendices}{\CLASSOPTIONromanappendicestrue} + + +% default to US letter paper, 10pt, twocolumn, one sided, final, journal +\ExecuteOptions{letterpaper,10pt,twocolumn,oneside,final,journal} +% overrride these defaults per user requests +\ProcessOptions + + + +%% -- Command Argument Scanning Support Functions -- + +% Sets the category codes for punctuation to their normal values. +% For local use with argument scanning. +\def\IEEEnormalcatcodespunct{\catcode`\!=12 \catcode`\,=12 \catcode`\:=12 +\catcode`\;=12 \catcode`\`=12 \catcode`\'=12 \catcode`\"=12 \catcode`\.=12 +\catcode`\/=12 \catcode`\?=12 \catcode`\*=12 \catcode`\+=12 \catcode`\-=12 +\catcode`\<=12 \catcode`\>=12 \catcode`\(=12 \catcode`\)=12 \catcode`\[=12 +\catcode`\]=12 \catcode`\==12 \catcode`\|=12} +% Sets the category codes for numbers to their normal values. +% For local use with argument scanning. +\def\IEEEnormalcatcodesnum{\catcode`\0=12 \catcode`\1=12 \catcode`\2=12 +\catcode`\3=12 \catcode`\4=12 \catcode`\5=12 \catcode`\6=12 \catcode`\7=12 +\catcode`\8=12 \catcode`\9=12} +% combined action of \IEEEnormalcatcodespunct and \IEEEnormalcatcodesnum +\def\IEEEnormalcatcodes{\IEEEnormalcatcodespunct\IEEEnormalcatcodesnum} + + +% usage: \@IEEEextracttoken*{} +% \@IEEEextracttoken fully expands its argument (which it then stores in +% \@IEEEextracttokenarg) via \edef and then the meaning of the first +% nonbrace (but including the empty group) token found is assigned via \let +% to \@IEEEextractedtoken as well as stored in the macro +% \@IEEEextractedtokenmacro. Tokens that would otherwise be discarded during +% the acquisition of the first are stored in \@IEEEextractedtokensdiscarded, +% however their original relative brace nesting depths are not guaranteed to +% be preserved. +% If the argument is empty, or if a first nonbrace token does not exist (or +% is an empty group), \@IEEEextractedtoken will be \relax and +% \@IEEEextractedtokenmacro and \@IEEEextractedtokensdiscarded will be empty. +% +% For example: +% \@IEEEextracttoken{{{ab}{cd}}{{ef}g}} +% results in: +% +% \@IEEEextracttokenarg ==> a macro containing {{ab}{cd}}{{ef}g} +% \@IEEEextractedtoken ==> the letter a +% \@IEEEextractedtokenmacro ==> a macro containing a +% \@IEEEextractedtokensdiscarded ==> a macro containing bcd{ef}g +% +% the *-star form, \@IEEEextracttoken*, does not expand its argument +% contents during processing. +\def\@IEEEextracttoken{\@ifstar{\let\@IEEEextracttokendef=\def\@@IEEEextracttoken}{\let\@IEEEextracttokendef=\edef\@@IEEEextracttoken}} + +\def\@@IEEEextracttoken#1{\@IEEEextracttokendef\@IEEEextracttokenarg{#1}\relax +\def\@IEEEextractedtokensdiscarded{}\relax % initialize to empty +% if the macro is unchanged after being acquired as a single undelimited argument +% with anything after it being stripped off as a delimited argument +% we know we have one token without any enclosing braces. loop until this is true. +\let\@IEEEextracttokencurgroup\@IEEEextracttokenarg +\loop + % trap case of an empty argument as this would cause a problem with + % \@@@IEEEextracttoken's first (nondelimited) argument acquisition + \ifx\@IEEEextracttokencurgroup\@empty + \def\@IEEEextractedtokenmacro{}\relax + \else + \expandafter\@@@IEEEextracttoken\@IEEEextracttokencurgroup\@IEEEgeneralsequenceDELIMITER\relax + \fi + \ifx\@IEEEextractedtokenmacro\@IEEEextracttokencurgroup + \else + \let\@IEEEextracttokencurgroup=\@IEEEextractedtokenmacro +\repeat +% we can safely do a \let= here because there should be at most one token +% the relax is needed to handle the case of no token found +\expandafter\let\expandafter\@IEEEextractedtoken\@IEEEextractedtokenmacro\relax} + +\def\@@@IEEEextracttoken#1#2\@IEEEgeneralsequenceDELIMITER{\def\@IEEEextractedtokenmacro{#1}\relax +\def\@@IEEEextractedtokensdiscarded{#2}\expandafter\expandafter\expandafter\def\expandafter\expandafter\expandafter +\@IEEEextractedtokensdiscarded\expandafter\expandafter\expandafter +{\expandafter\@@IEEEextractedtokensdiscarded\@IEEEextractedtokensdiscarded}} +%% +%% -- End of Command Argument Scanning Support Functions -- + + + +% Computer Society conditional execution command +\long\def\@IEEEcompsoconly#1{\relax\ifCLASSOPTIONcompsoc\relax#1\relax\fi\relax} +% inverse +\long\def\@IEEEnotcompsoconly#1{\relax\ifCLASSOPTIONcompsoc\else\relax#1\relax\fi\relax} +% compsoc conference +\long\def\@IEEEcompsocconfonly#1{\relax\ifCLASSOPTIONcompsoc\ifCLASSOPTIONconference\relax#1\relax\fi\fi\relax} +% compsoc not conference +\long\def\@IEEEcompsocnotconfonly#1{\relax\ifCLASSOPTIONcompsoc\ifCLASSOPTIONconference\else\relax#1\relax\fi\fi\relax} + + +% comsoc verify that newtxmath, mtpro2, mt11p or mathtime has been loaded +\def\@IEEEcomsocverifymathfont{\typeout{-- Verifying Times compatible math font.}\relax + \@ifpackageloaded{newtxmath}{\typeout{-- newtxmath loaded, OK.}}{\@@IEEEcomsocverifymathfont}} +\def\@@IEEEcomsocverifymathfont{\@ifpackageloaded{mtpro2}{\typeout{-- mtpro2 loaded, OK.}}{\@@@IEEEcomsocverifymathfont}} +\def\@@@IEEEcomsocverifymathfont{\@ifpackageloaded{mt11p}{\typeout{-- mt11p2 loaded, OK.}}{\@@@@IEEEcomsocverifymathfont}} +\def\@@@@IEEEcomsocverifymathfont{\@ifpackageloaded{mathtime}{\typeout{-- mathtime loaded, OK.}}{\@IEEEcomsocenforcemathfont}} + +% comsoc, if a Times math font was not loaded by user, enforce it +\def\@IEEEcomsocenforcemathfont{\typeout{** Times compatible math font not found, forcing.}\relax +\IfFileExists{newtxmath.sty}{\typeout{-- Found newtxmath, loading.}\RequirePackage{newtxmath}}{\@@IEEEcomsocenforcemathfont}} +\def\@@IEEEcomsocenforcemathfont{\IfFileExists{mtpro2.sty}{\typeout{-- Found mtpro2, loading.}\RequirePackage{mtpro2}}{\@@@IEEEcomsocenforcemathfont}} +\def\@@@IEEEcomsocenforcemathfont{\IfFileExists{mt11p.sty}{\typeout{-- Found mt11p, loading.}\RequirePackage{mt11p}}{\@@@@IEEEcomsocenforcemathfont}} +\def\@@@@IEEEcomsocenforcemathfont{\IfFileExists{mathtime.sty}{\typeout{-- Found mathtime, loading.}\RequirePackage{mathtime}}{\@@@@@IEEEcomsocenforcemathfont}} +% if no acceptable Times math font package found, error with newtxmath requirement +\def\@@@@@IEEEcomsocenforcemathfont{\typeout{** No Times compatible math font package found. newtxmath is required.}\RequirePackage{newtxmath}} + + +\ifCLASSOPTIONcomsoc + % ensure that if newtxmath is used, the cmintegrals option is also invoked + \PassOptionsToPackage{cmintegrals}{newtxmath} + % comsoc requires a Times like math font + % ensure this requirement is satisfied at document start + \AtBeginDocument{\@IEEEcomsocverifymathfont} +\fi + + + +% The IEEE uses Times Roman font, so we'll default to Times. +% These three commands make up the entire times.sty package. +\renewcommand{\sfdefault}{phv} +\renewcommand{\rmdefault}{ptm} +\renewcommand{\ttdefault}{pcr} + +% V1.7 compsoc nonconference papers, use Palatino/Palladio as the main text font, +% not Times Roman. +\@IEEEcompsocnotconfonly{\renewcommand{\rmdefault}{ppl}} + +% enable the selected main text font +\normalfont\selectfont + + +\ifCLASSOPTIONcomsoc + \typeout{-- Using IEEE Communications Society mode.} +\fi + +\ifCLASSOPTIONcompsoc + \typeout{-- Using IEEE Computer Society mode.} +\fi + + +% V1.7 conference notice message hook +\def\@IEEEconsolenoticeconference{\typeout{}% +\typeout{** Conference Paper **}% +\typeout{Before submitting the final camera ready copy, remember to:}% +\typeout{}% +\typeout{ 1. Manually equalize the lengths of two columns on the last page}% +\typeout{ of your paper;}% +\typeout{}% +\typeout{ 2. Ensure that any PostScript and/or PDF output post-processing}% +\typeout{ uses only Type 1 fonts and that every step in the generation}% +\typeout{ process uses the appropriate paper size.}% +\typeout{}} + + +% we can send console reminder messages to the user here +\AtEndDocument{\ifCLASSOPTIONconference\@IEEEconsolenoticeconference\fi} + + +% warn about the use of single column other than for draft mode +\ifCLASSOPTIONtwocolumn\else% + \ifCLASSOPTIONdraftcls\else% + \typeout{** ATTENTION: Single column mode is not typically used with IEEE publications.}% + \fi% +\fi + + +% V1.7 improved paper size setting code. +% Set pdfpage and dvips paper sizes. Conditional tests are similar to that +% of ifpdf.sty. Retain within {} to ensure tested macros are never altered, +% even if only effect is to set them to \relax. +% if \pdfoutput is undefined or equal to relax, output a dvips special +{\@ifundefined{pdfoutput}{\AtBeginDvi{\special{papersize=\CLASSINFOpaperwidth,\CLASSINFOpaperheight}}}{% +% pdfoutput is defined and not equal to \relax +% check for pdfpageheight existence just in case someone sets pdfoutput +% under non-pdflatex. If exists, set them regardless of value of \pdfoutput. +\@ifundefined{pdfpageheight}{\relax}{\global\pdfpagewidth\paperwidth +\global\pdfpageheight\paperheight}% +% if using \pdfoutput=0 under pdflatex, send dvips papersize special +\ifcase\pdfoutput +\AtBeginDvi{\special{papersize=\CLASSINFOpaperwidth,\CLASSINFOpaperheight}}% +\else +% we are using pdf output, set CLASSINFOpdf flag +\global\CLASSINFOpdftrue +\fi}} + +% let the user know the selected papersize +\typeout{-- Using \CLASSINFOpaperwidth\space x \CLASSINFOpaperheight\space +(\CLASSOPTIONpaper)\space paper.} + +\ifCLASSINFOpdf +\typeout{-- Using PDF output.} +\else +\typeout{-- Using DVI output.} +\fi + + +% The idea hinted here is for LaTeX to generate markleft{} and markright{} +% automatically for you after you enter \author{}, \journal{}, +% \journaldate{}, journalvol{}, \journalnum{}, etc. +% However, there may be some backward compatibility issues here as +% well as some special applications for IEEEtran.cls and special issues +% that may require the flexible \markleft{}, \markright{} and/or \markboth{}. +% We'll leave this as an open future suggestion. +%\newcommand{\journal}[1]{\def\@journal{#1}} +%\def\@journal{} + + + +% pointsize values +% used with ifx to determine the document's normal size +\def\@IEEEptsizenine{9} +\def\@IEEEptsizeten{10} +\def\@IEEEptsizeeleven{11} +\def\@IEEEptsizetwelve{12} + + + +% FONT DEFINITIONS (No sizexx.clo file needed) +% V1.6 revised font sizes, displayskip values and +% revised normalsize baselineskip to reduce underfull vbox problems +% on the 58pc = 696pt = 9.5in text height we want +% normalsize #lines/column baselineskip (aka leading) +% 9pt 63 11.0476pt (truncated down) +% 10pt 58 12pt (exact) +% 11pt 52 13.3846pt (truncated down) +% 12pt 50 13.92pt (exact) +% + +% we need to store the nominal baselineskip for the given font size +% in case baselinestretch ever changes. +% this is a dimen, so it will not hold stretch or shrink +\newdimen\@IEEEnormalsizeunitybaselineskip +\@IEEEnormalsizeunitybaselineskip\baselineskip + + + +%% ******* WARNING! ******* +%% +%% Authors should not alter font sizes, baselineskip ("leading"), +%% margins or other spacing values in an attempt to squeeze more +%% material on each page. +%% +%% The IEEE's own typesetting software will restore the correct +%% values when re-typesetting/proofing the submitted document, +%% possibly resulting in unexpected article over length charges. +%% +%% ******* WARNING! ******* + + +% 9pt option defaults +\ifx\CLASSOPTIONpt\@IEEEptsizenine +\typeout{-- This is a 9 point document.} +\def\normalsize{\@setfontsize{\normalsize}{9}{11.0476pt}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{11.0476pt} +\normalsize +\abovedisplayskip 1.5ex plus 3pt minus 1pt +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 3pt +\belowdisplayshortskip 1.5ex plus 3pt minus 1pt +\def\small{\@setfontsize{\small}{8.5}{10pt}} +\def\footnotesize{\@setfontsize{\footnotesize}{8}{9pt}} +\def\scriptsize{\@setfontsize{\scriptsize}{7}{8pt}} +\def\tiny{\@setfontsize{\tiny}{5}{6pt}} +% sublargesize is the same as large - 10pt +\def\sublargesize{\@setfontsize{\sublargesize}{10}{12pt}} +\def\large{\@setfontsize{\large}{10}{12pt}} +\def\Large{\@setfontsize{\Large}{12}{14pt}} +\def\LARGE{\@setfontsize{\LARGE}{14}{17pt}} +\def\huge{\@setfontsize{\huge}{17}{20pt}} +\def\Huge{\@setfontsize{\Huge}{20}{24pt}} +\fi +% +% 10pt option defaults +\ifx\CLASSOPTIONpt\@IEEEptsizeten +\typeout{-- This is a 10 point document.} +\def\normalsize{\@setfontsize{\normalsize}{10}{12.00pt}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{12pt} +\normalsize +\abovedisplayskip 1.5ex plus 4pt minus 2pt +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 4pt +\belowdisplayshortskip 1.5ex plus 4pt minus 2pt +\def\small{\@setfontsize{\small}{9}{10pt}} +\def\footnotesize{\@setfontsize{\footnotesize}{8}{9pt}} +\def\scriptsize{\@setfontsize{\scriptsize}{7}{8pt}} +\def\tiny{\@setfontsize{\tiny}{5}{6pt}} +% sublargesize is a tad smaller than large - 11pt +\def\sublargesize{\@setfontsize{\sublargesize}{11}{13.4pt}} +\def\large{\@setfontsize{\large}{12}{14pt}} +\def\Large{\@setfontsize{\Large}{14}{17pt}} +\def\LARGE{\@setfontsize{\LARGE}{17}{20pt}} +\def\huge{\@setfontsize{\huge}{20}{24pt}} +\def\Huge{\@setfontsize{\Huge}{24}{28pt}} +\fi +% +% 11pt option defaults +\ifx\CLASSOPTIONpt\@IEEEptsizeeleven +\typeout{-- This is an 11 point document.} +\def\normalsize{\@setfontsize{\normalsize}{11}{13.3846pt}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{13.3846pt} +\normalsize +\abovedisplayskip 1.5ex plus 5pt minus 3pt +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 5pt +\belowdisplayshortskip 1.5ex plus 5pt minus 3pt +\def\small{\@setfontsize{\small}{10}{12pt}} +\def\footnotesize{\@setfontsize{\footnotesize}{9}{10.5pt}} +\def\scriptsize{\@setfontsize{\scriptsize}{8}{9pt}} +\def\tiny{\@setfontsize{\tiny}{6}{7pt}} +% sublargesize is the same as large - 12pt +\def\sublargesize{\@setfontsize{\sublargesize}{12}{14pt}} +\def\large{\@setfontsize{\large}{12}{14pt}} +\def\Large{\@setfontsize{\Large}{14}{17pt}} +\def\LARGE{\@setfontsize{\LARGE}{17}{20pt}} +\def\huge{\@setfontsize{\huge}{20}{24pt}} +\def\Huge{\@setfontsize{\Huge}{24}{28pt}} +\fi +% +% 12pt option defaults +\ifx\CLASSOPTIONpt\@IEEEptsizetwelve +\typeout{-- This is a 12 point document.} +\def\normalsize{\@setfontsize{\normalsize}{12}{13.92pt}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{13.92pt} +\normalsize +\abovedisplayskip 1.5ex plus 6pt minus 4pt +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 6pt +\belowdisplayshortskip 1.5ex plus 6pt minus 4pt +\def\small{\@setfontsize{\small}{10}{12pt}} +\def\footnotesize{\@setfontsize{\footnotesize}{9}{10.5pt}} +\def\scriptsize{\@setfontsize{\scriptsize}{8}{9pt}} +\def\tiny{\@setfontsize{\tiny}{6}{7pt}} +% sublargesize is the same as large - 14pt +\def\sublargesize{\@setfontsize{\sublargesize}{14}{17pt}} +\def\large{\@setfontsize{\large}{14}{17pt}} +\def\Large{\@setfontsize{\Large}{17}{20pt}} +\def\LARGE{\@setfontsize{\LARGE}{20}{24pt}} +\def\huge{\@setfontsize{\huge}{22}{26pt}} +\def\Huge{\@setfontsize{\Huge}{24}{28pt}} +\fi + + + +% V1.8a compsoc font sizes +% compsoc font sizes use bp "Postscript" point units (1/72in) +% rather than the traditional pt (1/72.27) +\ifCLASSOPTIONcompsoc +% -- compsoc defaults -- +% ** will override some of these values later ** +% 9pt +\ifx\CLASSOPTIONpt\@IEEEptsizenine +\def\normalsize{\@setfontsize{\normalsize}{9bp}{11bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{11bp} +\normalsize +\abovedisplayskip 1.5ex plus 3bp minus 1bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0bp plus 3bp +\belowdisplayshortskip 1.5ex plus 3bp minus 1bp +\def\small{\@setfontsize{\small}{8.5bp}{10bp}} +\def\footnotesize{\@setfontsize{\footnotesize}{8bp}{9bp}} +\def\scriptsize{\@setfontsize{\scriptsize}{7bp}{8bp}} +\def\tiny{\@setfontsize{\tiny}{5bp}{6bp}} +% sublargesize is the same as large - 10bp +\def\sublargesize{\@setfontsize{\sublargesize}{10bp}{12bp}} +\def\large{\@setfontsize{\large}{10bp}{12bp}} +\def\Large{\@setfontsize{\Large}{12bp}{14bp}} +\def\LARGE{\@setfontsize{\LARGE}{14bp}{17bp}} +\def\huge{\@setfontsize{\huge}{17bp}{20bp}} +\def\Huge{\@setfontsize{\Huge}{20bp}{24bp}} +\fi +% +% 10pt +\ifx\CLASSOPTIONpt\@IEEEptsizeten +\def\normalsize{\@setfontsize{\normalsize}{10bp}{12bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{12bp} +\normalsize +\abovedisplayskip 1.5ex plus 4bp minus 2bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 4bp +\belowdisplayshortskip 1.5ex plus 4bp minus 2bp +\def\small{\@setfontsize{\small}{9bp}{10bp}} +\def\footnotesize{\@setfontsize{\footnotesize}{8bp}{9bp}} +\def\scriptsize{\@setfontsize{\scriptsize}{7bp}{8bp}} +\def\tiny{\@setfontsize{\tiny}{5bp}{6bp}} +% sublargesize is a tad smaller than large - 11bp +\def\sublargesize{\@setfontsize{\sublargesize}{11bp}{13.5bp}} +\def\large{\@setfontsize{\large}{12bp}{14bp}} +\def\Large{\@setfontsize{\Large}{14bp}{17bp}} +\def\LARGE{\@setfontsize{\LARGE}{17bp}{20bp}} +\def\huge{\@setfontsize{\huge}{20bp}{24bp}} +\def\Huge{\@setfontsize{\Huge}{24bp}{28bp}} +\fi +% +% 11pt +\ifx\CLASSOPTIONpt\@IEEEptsizeeleven +\def\normalsize{\@setfontsize{\normalsize}{11bp}{13.5bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{13.5bp} +\normalsize +\abovedisplayskip 1.5ex plus 5bp minus 3bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 5bp +\belowdisplayshortskip 1.5ex plus 5bp minus 3bp +\def\small{\@setfontsize{\small}{10bp}{12bp}} +\def\footnotesize{\@setfontsize{\footnotesize}{9bp}{10.5bp}} +\def\scriptsize{\@setfontsize{\scriptsize}{8bp}{9bp}} +\def\tiny{\@setfontsize{\tiny}{6bp}{7bp}} +% sublargesize is the same as large - 12bp +\def\sublargesize{\@setfontsize{\sublargesize}{12bp}{14bp}} +\def\large{\@setfontsize{\large}{12bp}{14bp}} +\def\Large{\@setfontsize{\Large}{14bp}{17bp}} +\def\LARGE{\@setfontsize{\LARGE}{17bp}{20bp}} +\def\huge{\@setfontsize{\huge}{20bp}{24bp}} +\def\Huge{\@setfontsize{\Huge}{24bp}{28bp}} +\fi +% +% 12pt +\ifx\CLASSOPTIONpt\@IEEEptsizetwelve +\def\normalsize{\@setfontsize{\normalsize}{12bp}{14bp}}% +\setlength{\@IEEEnormalsizeunitybaselineskip}{14bp}% +\normalsize +\abovedisplayskip 1.5ex plus 6bp minus 4bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 6bp +\belowdisplayshortskip 1.5ex plus 6bp minus 4bp +\def\small{\@setfontsize{\small}{10bp}{12bp}} +\def\footnotesize{\@setfontsize{\footnotesize}{9bp}{10.5bp}} +\def\scriptsize{\@setfontsize{\scriptsize}{8bp}{9bp}} +\def\tiny{\@setfontsize{\tiny}{6bp}{7bp}} +% sublargesize is the same as large - 14bp +\def\sublargesize{\@setfontsize{\sublargesize}{14bp}{17bp}} +\def\large{\@setfontsize{\large}{14bp}{17bp}} +\def\Large{\@setfontsize{\Large}{17bp}{20bp}} +\def\LARGE{\@setfontsize{\LARGE}{20bp}{24bp}} +\def\huge{\@setfontsize{\huge}{22bp}{26bp}} +\def\Huge{\@setfontsize{\Huge}{24bp}{28bp}} +\fi +% +% -- override defaults: compsoc journals use special normalsizes -- +\ifCLASSOPTIONconference +% +% compsoc conferences +% 9pt +\ifx\CLASSOPTIONpt\@IEEEptsizenine +\def\normalsize{\@setfontsize{\normalsize}{9bp}{10.8bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{10.8bp} +\normalsize +\abovedisplayskip 1.5ex plus 3bp minus 1bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0bp plus 3bp +\belowdisplayshortskip 1.5ex plus 3bp minus 1bp +\fi +% 10pt +\ifx\CLASSOPTIONpt\@IEEEptsizeten +\def\normalsize{\@setfontsize{\normalsize}{10bp}{11.2bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{11.2bp} +\normalsize +\abovedisplayskip 1.5ex plus 4bp minus 2bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 4bp +\belowdisplayshortskip 1.5ex plus 4bp minus 2bp +\fi +% 11pt +\ifx\CLASSOPTIONpt\@IEEEptsizeeleven +\def\normalsize{\@setfontsize{\normalsize}{11bp}{13.2bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{13.2bp} +\normalsize +\abovedisplayskip 1.5ex plus 5bp minus 3bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 5bp +\belowdisplayshortskip 1.5ex plus 5bp minus 3bp +\fi +% 12pt +\ifx\CLASSOPTIONpt\@IEEEptsizetwelve +\def\normalsize{\@setfontsize{\normalsize}{12bp}{14.4bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{14.4bp} +\normalsize +\abovedisplayskip 1.5ex plus 6bp minus 4bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 6bp +\belowdisplayshortskip 1.5ex plus 6bp minus 4bp +\fi +% +% compsoc nonconferences +\else +% 9pt +\ifx\CLASSOPTIONpt\@IEEEptsizenine +\def\normalsize{\@setfontsize{\normalsize}{9bp}{10.8bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{10.8bp} +\normalsize +\abovedisplayskip 1.5ex plus 3bp minus 1bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0bp plus 3bp +\belowdisplayshortskip 1.5ex plus 3bp minus 1bp +\fi +% 10pt +\ifx\CLASSOPTIONpt\@IEEEptsizeten +% the official spec is 9.5bp with 11.4bp leading for 10pt, +% but measurements of proofs suggest upto 11.723bp leading +% here we'll use 11.54bp which gives 61 lines per column +% with the standard compsoc margins +\def\normalsize{\@setfontsize{\normalsize}{9.5bp}{11.54bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{11.54bp} +\normalsize +\abovedisplayskip 1.5ex plus 4bp minus 2bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 4bp +\belowdisplayshortskip 1.5ex plus 4bp minus 2bp +\fi +% 11pt +\ifx\CLASSOPTIONpt\@IEEEptsizeeleven +\def\normalsize{\@setfontsize{\normalsize}{11bp}{13.2bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{13.2bp} +\normalsize +\abovedisplayskip 1.5ex plus 5bp minus 3bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 5bp +\belowdisplayshortskip 1.5ex plus 5bp minus 3bp +\fi +% 12pt +\ifx\CLASSOPTIONpt\@IEEEptsizetwelve +\def\normalsize{\@setfontsize{\normalsize}{12bp}{14.4bp}} +\setlength{\@IEEEnormalsizeunitybaselineskip}{14.4bp} +\normalsize +\abovedisplayskip 1.5ex plus 6bp minus 4bp +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip 0pt plus 6bp +\belowdisplayshortskip 1.5ex plus 6bp minus 4bp +\fi +\fi\fi + + + + +% V1.6 The Computer Modern Fonts will issue a substitution warning for +% 24pt titles (24.88pt is used instead, but the default and correct +% Times font will scale exactly as needed) increase the substitution +% tolerance to turn off this warning. +% +% V1.8a, the compsoc bp font sizes can also cause bogus font substitution +% warnings with footnote or scriptsize math and the $\bullet$ itemized +% list of \IEEEcompsocitemizethanks. So, increase this to 1.5pt or more. +\def\fontsubfuzz{1.7bp} + + +% warn the user in case they forget to use the 9pt option with +% technote +\ifCLASSOPTIONtechnote% + \ifx\CLASSOPTIONpt\@IEEEptsizenine\else% + \typeout{** ATTENTION: Technotes are normally 9pt documents.}% + \fi% +\fi + + +% V1.7 +% Improved \textunderscore to provide a much better fake _ when used with +% OT1 encoding. Under OT1, detect use of pcr or cmtt \ttfamily and use +% available true _ glyph for those two typewriter fonts. +\def\@IEEEstringptm{ptm} % Times Roman family +\def\@IEEEstringppl{ppl} % Palatino Roman family +\def\@IEEEstringphv{phv} % Helvetica Sans Serif family +\def\@IEEEstringpcr{pcr} % Courier typewriter family +\def\@IEEEstringcmtt{cmtt} % Computer Modern typewriter family +\DeclareTextCommandDefault{\textunderscore}{\leavevmode +\ifx\f@family\@IEEEstringpcr\string_\else +\ifx\f@family\@IEEEstringcmtt\string_\else +\ifx\f@family\@IEEEstringptm\kern 0em\vbox{\hrule\@width 0.5em\@height 0.5pt\kern -0.3ex}\else +\ifx\f@family\@IEEEstringppl\kern 0em\vbox{\hrule\@width 0.5em\@height 0.5pt\kern -0.3ex}\else +\ifx\f@family\@IEEEstringphv\kern -0.03em\vbox{\hrule\@width 0.62em\@height 0.52pt\kern -0.33ex}\kern -0.03em\else +\kern 0.09em\vbox{\hrule\@width 0.6em\@height 0.44pt\kern -0.63pt\kern -0.42ex}\kern 0.09em\fi\fi\fi\fi\fi\relax} + + + + +% set the default \baselinestretch +\def\baselinestretch{1} +\ifCLASSOPTIONdraftcls + \def\baselinestretch{1.5}% default baselinestretch for draft modes +\fi + + +% process CLASSINPUT baselinestretch +\ifx\CLASSINPUTbaselinestretch\@IEEEundefined +\else + \edef\baselinestretch{\CLASSINPUTbaselinestretch} % user CLASSINPUT override + \typeout{** ATTENTION: Overriding \string\baselinestretch\space to + \baselinestretch\space via \string\CLASSINPUT.} +\fi + +\small\normalsize % make \baselinestretch take affect + + + + +% store the normalsize baselineskip +\newdimen\CLASSINFOnormalsizebaselineskip +\CLASSINFOnormalsizebaselineskip=\baselineskip\relax +% and the normalsize unity (baselinestretch=1) baselineskip +% we could save a register by giving the user access to +% \@IEEEnormalsizeunitybaselineskip. However, let's protect +% its read only internal status +\newdimen\CLASSINFOnormalsizeunitybaselineskip +\CLASSINFOnormalsizeunitybaselineskip=\@IEEEnormalsizeunitybaselineskip\relax +% store the nominal value of jot +\newdimen\IEEEnormaljot +\IEEEnormaljot=0.25\baselineskip\relax + +% set \jot +\jot=\IEEEnormaljot\relax + + + + +% V1.6, we are now going to fine tune the interword spacing +% The default interword glue for Times under TeX appears to use a +% nominal interword spacing of 25% (relative to the font size, i.e., 1em) +% a maximum of 40% and a minimum of 19%. +% For example, 10pt text uses an interword glue of: +% +% 2.5pt plus 1.49998pt minus 0.59998pt +% +% However, the IEEE allows for a more generous range which reduces the need +% for hyphenation, especially for two column text. Furthermore, the IEEE +% tends to use a little bit more nominal space between the words. +% The IEEE's interword spacing percentages appear to be: +% 35% nominal +% 23% minimum +% 50% maximum +% (They may even be using a tad more for the largest fonts such as 24pt.) +% +% for bold text, the IEEE increases the spacing a little more: +% 37.5% nominal +% 23% minimum +% 55% maximum + +% here are the interword spacing ratios we'll use +% for medium (normal weight) +\def\@IEEEinterspaceratioM{0.35} +\def\@IEEEinterspaceMINratioM{0.23} +\def\@IEEEinterspaceMAXratioM{0.50} + +% for bold +\def\@IEEEinterspaceratioB{0.375} +\def\@IEEEinterspaceMINratioB{0.23} +\def\@IEEEinterspaceMAXratioB{0.55} + + +% compsoc nonconference papers use Palatino, +% tweak settings to better match the proofs +\ifCLASSOPTIONcompsoc +\ifCLASSOPTIONconference\else +% for medium (normal weight) +\def\@IEEEinterspaceratioM{0.28} +\def\@IEEEinterspaceMINratioM{0.21} +\def\@IEEEinterspaceMAXratioM{0.47} +% for bold +\def\@IEEEinterspaceratioB{0.305} +\def\@IEEEinterspaceMINratioB{0.21} +\def\@IEEEinterspaceMAXratioB{0.52} +\fi\fi + + +% command to revise the interword spacing for the current font under TeX: +% \fontdimen2 = nominal interword space +% \fontdimen3 = interword stretch +% \fontdimen4 = interword shrink +% since all changes to the \fontdimen are global, we can enclose these commands +% in braces to confine any font attribute or length changes +\def\@@@IEEEsetfontdimens#1#2#3{{% +\setlength{\@IEEEtrantmpdimenB}{\f@size pt}% grab the font size in pt, could use 1em instead. +\setlength{\@IEEEtrantmpdimenA}{#1\@IEEEtrantmpdimenB}% +\fontdimen2\font=\@IEEEtrantmpdimenA\relax +\addtolength{\@IEEEtrantmpdimenA}{-#2\@IEEEtrantmpdimenB}% +\fontdimen3\font=-\@IEEEtrantmpdimenA\relax +\setlength{\@IEEEtrantmpdimenA}{#1\@IEEEtrantmpdimenB}% +\addtolength{\@IEEEtrantmpdimenA}{-#3\@IEEEtrantmpdimenB}% +\fontdimen4\font=\@IEEEtrantmpdimenA\relax}} + +% revise the interword spacing for each font weight +\def\@@IEEEsetfontdimens{{% +\mdseries +\@@@IEEEsetfontdimens{\@IEEEinterspaceratioM}{\@IEEEinterspaceMAXratioM}{\@IEEEinterspaceMINratioM}% +\bfseries +\@@@IEEEsetfontdimens{\@IEEEinterspaceratioB}{\@IEEEinterspaceMAXratioB}{\@IEEEinterspaceMINratioB}% +}} + +% revise the interword spacing for each font shape +% \slshape is not often used for IEEE work and is not altered here. The \scshape caps are +% already a tad too large in the free LaTeX fonts (as compared to what the IEEE uses) so we +% won't alter these either. +\def\@IEEEsetfontdimens{{% +\normalfont +\@@IEEEsetfontdimens +\normalfont\itshape +\@@IEEEsetfontdimens +}} + +% command to revise the interword spacing for each font size (and shape +% and weight). Only the \rmfamily is done here as \ttfamily uses a +% fixed spacing and \sffamily is not used as the main text of IEEE papers. +\def\@IEEEtunefonts{{\selectfont\rmfamily +\tiny\@IEEEsetfontdimens +\scriptsize\@IEEEsetfontdimens +\footnotesize\@IEEEsetfontdimens +\small\@IEEEsetfontdimens +\normalsize\@IEEEsetfontdimens +\sublargesize\@IEEEsetfontdimens +\large\@IEEEsetfontdimens +\LARGE\@IEEEsetfontdimens +\huge\@IEEEsetfontdimens +\Huge\@IEEEsetfontdimens}} + +% if the nofonttune class option is not given, revise the interword spacing +% now - in case IEEEtran makes any default length measurements, and make +% sure all the default fonts are loaded +\ifCLASSOPTIONnofonttune\else +\@IEEEtunefonts +\fi + +% and again at the start of the document in case the user loaded different fonts +\AtBeginDocument{\ifCLASSOPTIONnofonttune\else\@IEEEtunefonts\fi} + + + + + +% -- V1.8a page setup commands -- + +% The default sample text for calculating margins +% Note that IEEE publications use \scriptsize for headers and footers. +\def\IEEEdefaultsampletext{\normalfont\normalsize gT} +\def\IEEEdefaultheadersampletext{\normalfont\scriptsize T}% IEEE headers default to uppercase +\def\IEEEdefaultfootersampletext{\normalfont\scriptsize gT} + + + +% usage: \IEEEsettextwidth{inner margin}{outer margin} +% Sets \textwidth to allow the specified inner and outer margins +% for the current \paperwidth. +\def\IEEEsettextwidth#1#2{\@IEEEtrantmpdimenA\paperwidth +\@IEEEtrantmpdimenB#1\relax +\advance\@IEEEtrantmpdimenA by -\@IEEEtrantmpdimenB +\@IEEEtrantmpdimenB#2\relax +\advance\@IEEEtrantmpdimenA by -\@IEEEtrantmpdimenB +\textwidth\@IEEEtrantmpdimenA} + + + +% usage: \IEEEsetsidemargin{mode: i, o, c, a}{margin/offset} +% Sets \oddsidemargin and \evensidemargin to yield the specified margin +% of the given mode. +% The available modes are: +% i = inner margin +% o = outer margin +% c = centered, with the given offset +% a = adjust the margins using the given offset +% For the offsets, positive values increase the inner margin. +% \textwidth should be set properly for the given margins before calling this +% function. +\def\IEEEsetsidemargin#1#2{\@IEEEtrantmpdimenA #2\relax +\@IEEEextracttoken{#1}\relax +% check for mode errors +\ifx\@IEEEextractedtokenmacro\@empty + \@IEEEclspkgerror{Empty mode type in \string\IEEEsetsidemargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `i'}{Valid modes for \string\IEEEsetsidemargin\space are: i, o, c and a.}\relax + \let\@IEEEextractedtoken=i\relax + \def\@IEEEextractedtokenmacro{i}\relax +\else + \ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: \string\IEEEsetsidemargin\space mode specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax + \fi +\fi +% handle each mode +\if\@IEEEextractedtoken a\relax + \advance\oddsidemargin by \@IEEEtrantmpdimenA\relax +\else +\if\@IEEEextractedtoken c\relax + \oddsidemargin\paperwidth + \advance\oddsidemargin by -\textwidth + \divide\oddsidemargin by 2\relax + \advance\oddsidemargin by -1in\relax + \advance\oddsidemargin by \@IEEEtrantmpdimenA\relax +\else +\if\@IEEEextractedtoken o\relax + \oddsidemargin\paperwidth + \advance\oddsidemargin by -\textwidth + \advance\oddsidemargin by -\@IEEEtrantmpdimenA + \advance\oddsidemargin by -1in\relax +\else + \if\@IEEEextractedtoken i\relax + \else + \@IEEEclspkgerror{Unknown mode type `\@IEEEextractedtokenmacro' in \string\IEEEsetsidemargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `i'}% + {Valid modes for \string\IEEEsetsidemargin\space are: i, o, c and a.}% + \fi + \oddsidemargin\@IEEEtrantmpdimenA + \advance\oddsidemargin by -1in\relax +\fi\fi\fi +% odd and even side margins both mean "inner" for single sided pages +\evensidemargin\oddsidemargin +% but are mirrors of each other when twosided is in effect +\if@twoside + \evensidemargin\paperwidth + \advance\evensidemargin by -\textwidth + \advance\evensidemargin by -\oddsidemargin + % have to compensate for both the builtin 1in LaTex offset + % and the fact we already subtracted this offset from \oddsidemargin + \advance\evensidemargin -2in\relax +\fi} + + + +% usage: \IEEEsettextheight[sample text]{top text margin}{bottom text margin} +% Sets \textheight based on the specified top margin and bottom margin. +% Takes into consideration \paperheight, \topskip, and (by default) the +% the actual height and depth of the \IEEEdefaultsampletext text. +\def\IEEEsettextheight{\@ifnextchar [{\@IEEEsettextheight}{\@IEEEsettextheight[\IEEEdefaultsampletext]}} +\def\@IEEEsettextheight[#1]#2#3{\textheight\paperheight\relax + \@IEEEtrantmpdimenA #2\relax + \advance \textheight by -\@IEEEtrantmpdimenA% subtract top margin + \@IEEEtrantmpdimenA #3\relax + \advance \textheight by -\@IEEEtrantmpdimenA% subtract bottom margin + \advance \textheight by \topskip% add \topskip + % subtract off everything above the top, and below the bottom, baselines + \settoheight{\@IEEEtrantmpdimenA}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance \textheight by -\@IEEEtrantmpdimenA + \settodepth{\@IEEEtrantmpdimenA}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance \textheight by -\@IEEEtrantmpdimenA} + + + +\newdimen\IEEEquantizedlength +\IEEEquantizedlength 0sp\relax +\newdimen\IEEEquantizedlengthdiff +\IEEEquantizedlengthdiff 0sp\relax +\def\IEEEquantizedlengthint{0} + +% usage: \IEEEquantizelength{mode: d, c, i}{base unit}{length} +% Sets the length \IEEEquantizedlength to be an integer multiple of the given +% (nonzero) base unit such that \IEEEquantizedlength approximates the given +% length. +% \IEEEquantizedlengthdiff is a length equal to the difference between the +% \IEEEquantizedlength and the given length. +% \IEEEquantizedlengthint is a macro containing the integer number of base units +% in \IEEEquantizedlength. +% i.e., \IEEEquantizedlength = \IEEEquantizedlengthint * base unit +% The mode determines how \IEEEquantizedlength is quantized: +% d = always decrease (always round down \IEEEquantizeint) +% c = use the closest match +% i = always increase (always round up \IEEEquantizeint) +% In anycase, if the given length is already quantized, +% \IEEEquantizedlengthdiff will be set to zero. +\def\IEEEquantizelength#1#2#3{\begingroup +% work in isolation so as not to externally disturb the \@IEEEtrantmp +% variables +% load the argument values indirectly via \IEEEquantizedlengthdiff +% in case the user refers to our \@IEEEtrantmpdimenX, \IEEEquantizedlength, +% etc. in the arguments. we also will work with these as counters, +% i.e., in sp units +% A has the base unit +\IEEEquantizedlengthdiff #2\relax\relax\relax\relax +\@IEEEtrantmpcountA\IEEEquantizedlengthdiff +% B has the input length +\IEEEquantizedlengthdiff #3\relax\relax\relax\relax +\@IEEEtrantmpcountB\IEEEquantizedlengthdiff +\@IEEEtrantmpdimenA\the\@IEEEtrantmpcountA sp\relax +\@IEEEtrantmpdimenB\the\@IEEEtrantmpcountB sp\relax +% \@IEEEtrantmpcountC will have the quantized int +% \IEEEquantizedlength will have the quantized length +% \@IEEEtrantmpdimenC will have the quantized diff +% initialize them to zero as this is what will be +% exported if an error occurs +\@IEEEtrantmpcountC 0\relax +\IEEEquantizedlength 0sp\relax +\@IEEEtrantmpdimenC 0sp\relax +% extract mode +\@IEEEextracttoken{#1}\relax +% check for mode errors +\ifx\@IEEEextractedtokenmacro\@empty + \@IEEEclspkgerror{Empty mode type in \string\IEEEquantizelength\space (line \the\inputlineno).\MessageBreak + Defaulting to `d'}{Valid modes for \string\IEEEquantizelength\space are: d, c and i.}\relax + \let\@IEEEextractedtoken=d\relax + \def\@IEEEextractedtokenmacro{d}\relax +\else + \ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: \string\IEEEquantizelength\space mode specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax + \fi +\fi +% check for base unit is zero error +\ifnum\@IEEEtrantmpcountA=0\relax +\@IEEEclspkgerror{Base unit is zero in \string\IEEEquantizelength\space (line \the\inputlineno).\MessageBreak + \string\IEEEquantizedlength\space and \string\IEEEquantizedlengthdiff\space are set to zero}{Division by zero is not allowed.}\relax +\else% base unit is nonzero + % \@IEEEtrantmpcountC carries the number of integer units + % in the quantized length (integer length \ base) + \@IEEEtrantmpcountC\@IEEEtrantmpcountB\relax + \divide\@IEEEtrantmpcountC by \@IEEEtrantmpcountA\relax + % \IEEEquantizedlength has the (rounded down) quantized length + % = base * int + \IEEEquantizedlength\@IEEEtrantmpdimenA\relax + \multiply\IEEEquantizedlength by \@IEEEtrantmpcountC\relax + % \@IEEEtrantmpdimenC has the difference + % = quantized length - length + \@IEEEtrantmpdimenC\IEEEquantizedlength\relax + \advance\@IEEEtrantmpdimenC by -\@IEEEtrantmpdimenB\relax + % trap special case of length being already quantized + % to avoid a roundup under i option + \ifdim\@IEEEtrantmpdimenC=0sp\relax + \else % length not is already quantized + % set dimenA to carry the upper quantized (absolute value) difference: + % quantizedlength + base - length + \advance\@IEEEtrantmpdimenA by \IEEEquantizedlength\relax + \advance\@IEEEtrantmpdimenA by -\@IEEEtrantmpdimenB\relax + % set dimenB to carry the lower quantized (absolute value) difference: + % length - quantizedlength + \advance\@IEEEtrantmpdimenB by -\IEEEquantizedlength\relax + % handle each mode + \if\@IEEEextractedtoken c\relax + % compare upper and lower amounts, select upper if lower > upper + \ifdim\@IEEEtrantmpdimenB>\@IEEEtrantmpdimenA\relax + % use upper + \advance\IEEEquantizedlength by \the\@IEEEtrantmpcountA sp\relax + \advance\@IEEEtrantmpcountC by 1\relax + \@IEEEtrantmpdimenC\@IEEEtrantmpdimenA + \else% <=. uselower + % no need to do anything for lower, use output values already setup + \fi + \else% not mode c + \if\@IEEEextractedtoken i\relax + % always round up under i mode + \advance\IEEEquantizedlength by \the\@IEEEtrantmpcountA sp\relax + \advance\@IEEEtrantmpcountC by 1\relax + \@IEEEtrantmpdimenC\@IEEEtrantmpdimenA + \else + \if\@IEEEextractedtoken d\relax + \else + \@IEEEclspkgerror{Unknown mode type `\@IEEEextractedtokenmacro' in \string\IEEEquantizelength\space (line \the\inputlineno).\MessageBreak + Defaulting to `d'}% + {Valid modes for \string\IEEEquantizelength\space are: d, c, and i.}\relax + \fi % if d + % no need to do anything for d, use output values already setup + \fi\fi % if i, c + \fi % if length is already quantized +\fi% if base unit is zero +% globally assign the results to macros we use here to escape the enclosing +% group without needing to call \global on any of the \@IEEEtrantmp variables. +% \@IEEEtrantmpcountC has the quantized int +% \IEEEquantizedlength has the quantized length +% \@IEEEtrantmpdimenC has the quantized diff +\xdef\@IEEEquantizedlengthintmacro{\the\@IEEEtrantmpcountC}\relax +\@IEEEtrantmpcountC\IEEEquantizedlength\relax +\xdef\@IEEEquantizedlengthmacro{\the\@IEEEtrantmpcountC}\relax +\@IEEEtrantmpcountC\@IEEEtrantmpdimenC\relax +\xdef\@IEEEquantizedlengthdiffmacro{\the\@IEEEtrantmpcountC}\relax +\endgroup +% locally assign the outputs here from the macros +\expandafter\IEEEquantizedlength\@IEEEquantizedlengthmacro sp\relax +\expandafter\IEEEquantizedlengthdiff\@IEEEquantizedlengthdiffmacro sp\relax +\edef\IEEEquantizedlengthint{\@IEEEquantizedlengthintmacro}\relax} + + + +\newdimen\IEEEquantizedtextheightdiff +\IEEEquantizedtextheightdiff 0sp\relax + +% usage: \IEEEquantizetextheight[base unit]{mode: d, c, i} +% Sets \textheight to be an integer multiple of the current \baselineskip +% (or the optionally specified base unit) plus the first (\topskip) line. +% \IEEEquantizedtextheightdiff is a length equal to the difference between +% the new quantized and original \textheight. +% \IEEEquantizedtextheightlpc is a macro containing the integer number of +% lines per column under the quantized \textheight. i.e., +% \textheight = \IEEEquantizedtextheightlpc * \baselineskip + \topskip +% The mode determines how \textheight is quantized: +% d = always decrease (always round down the number of lines per column) +% c = use the closest match +% i = always increase (always round up the number of lines per column) +% In anycase, if \textheight is already quantized, it will remain unchanged, +% and \IEEEquantizedtextheightdiff will be set to zero. +% Depends on: \IEEEquantizelength +\def\IEEEquantizetextheight{\@ifnextchar [{\@IEEEquantizetextheight}{\@IEEEquantizetextheight[\baselineskip]}} +\def\@IEEEquantizetextheight[#1]#2{\begingroup +% use our \IEEEquantizedtextheightdiff as a scratch pad +% we need to subtract off \topskip before quantization +\IEEEquantizedtextheightdiff\textheight +\advance\IEEEquantizedtextheightdiff by -\topskip\relax +\IEEEquantizelength{#2}{#1}{\IEEEquantizedtextheightdiff} +% add back \topskip line +\advance\IEEEquantizedlength by \topskip +\@IEEEtrantmpcountC\IEEEquantizedlengthint\relax +\advance\@IEEEtrantmpcountC by 1\relax +% globally assign the results to macros we use here to escape the enclosing +% group without needing to call \global on any of the \@IEEEtrantmp variables. +\xdef\@IEEEquantizedtextheightlpcmacro{\the\@IEEEtrantmpcountC}\relax +\@IEEEtrantmpcountC\IEEEquantizedlength\relax +\xdef\@IEEEquantizedtextheightmacro{\the\@IEEEtrantmpcountC}\relax +\@IEEEtrantmpcountC\IEEEquantizedlengthdiff\relax +\xdef\@IEEEquantizedtextheightdiffmacro{\the\@IEEEtrantmpcountC}\relax +\endgroup +% locally assign the outputs here from the macros +\textheight\@IEEEquantizedtextheightmacro sp\relax +\IEEEquantizedtextheightdiff\@IEEEquantizedtextheightdiffmacro sp\relax +\edef\IEEEquantizedtextheightlpc{\@IEEEquantizedtextheightlpcmacro}} + + + +% usage: \IEEEsettopmargin[sample text]{mode: t, b, c, a, q}{margin/offset} +% Sets \topmargin based on the specified vertical margin. +% Takes into consideration the base 1in offset, \headheight, \headsep, +% \topskip, and (by default) the the actual height (or, for the bottom, depth) +% of the \IEEEdefaultsampletext text. +% The available modes are: +% t = top margin +% b = bottom margin +% c = vertically centered, with the given offset +% a = adjust the vertical margins using the given offset +% q = adjust the margins using \IEEEquantizedtextheightdiff and the given offset +% For the offsets, positive values increase the top margin. +% \headheight, \headsep, \topskip and \textheight should be set properly for the +% given margins before calling this function. +\def\IEEEsettopmargin{\@ifnextchar [{\@IEEEsettopmargin}{\@IEEEsettopmargin[\IEEEdefaultsampletext]}} +\def\@IEEEsettopmargin[#1]#2#3{\@IEEEtrantmpdimenA #3\relax +\@IEEEextracttoken{#2}\relax +% check for mode errors +\ifx\@IEEEextractedtokenmacro\@empty + \@IEEEclspkgerror{Empty mode type in \string\IEEEsettopmargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `t'}{Valid modes for \string\IEEEsettopmargin\space are: t, b, c, a and q.}\relax + \let\@IEEEextractedtoken=t\relax + \def\@IEEEextractedtokenmacro{t}\relax +\else + \ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: \string\IEEEsettopmargin\space mode specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax + \fi +\fi +% handle each mode +\if\@IEEEextractedtoken a\relax + \advance\topmargin by \@IEEEtrantmpdimenA\relax +\else +\if\@IEEEextractedtoken q\relax + % we need to adjust by half the \IEEEquantizedtextheightdiff value + \@IEEEtrantmpdimenB\IEEEquantizedtextheightdiff\relax + \divide\@IEEEtrantmpdimenB by 2\relax + % a positive \IEEEquantizedtextheightdiff means we need to reduce \topmargin + % because \textheight has been lenghtened + \advance\topmargin by -\@IEEEtrantmpdimenB\relax + \advance\topmargin by \@IEEEtrantmpdimenA\relax +\else +\if\@IEEEextractedtoken c\relax + \topmargin\paperheight + \advance\topmargin by -\textheight + % \textheight includes \topskip, but we should not count topskip whitespace here, backout + \advance \topmargin by \topskip + \settoheight{\@IEEEtrantmpdimenB}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\topmargin by -\@IEEEtrantmpdimenB\relax + \settodepth{\@IEEEtrantmpdimenB}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\topmargin by -\@IEEEtrantmpdimenB\relax + \divide\topmargin by 2\relax + \advance\topmargin by \@IEEEtrantmpdimenA\relax +\else +\if\@IEEEextractedtoken b\relax + \topmargin\paperheight + \advance\topmargin by -\textheight + % \textheight includes \topskip, but we should not count topskip whitespace here, backout + \advance \topmargin by \topskip + \settodepth{\@IEEEtrantmpdimenB}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\topmargin by -\@IEEEtrantmpdimenB\relax + \advance\topmargin by -\@IEEEtrantmpdimenA\relax +\else + \if\@IEEEextractedtoken t\relax + \else + \@IEEEclspkgerror{Unknown mode type `\@IEEEextractedtokenmacro' in \string\IEEEsettopmargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `t'}% + {Valid modes for \string\IEEEsettopmargin\space are: t, b, c, a and q.}\relax + \fi + \topmargin\@IEEEtrantmpdimenA\relax + \settoheight{\@IEEEtrantmpdimenB}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\topmargin by \@IEEEtrantmpdimenB\relax +\fi\fi % if t, b, c +% convert desired top margin into actual \topmargin +% this is not done for the q or a modes because they are only adjustments +\advance \topmargin by -\topskip +\advance \topmargin by -1in +\advance \topmargin by -\headheight +\advance \topmargin by -\headsep +\fi\fi % if q, a +} + + + +% usage: \IEEEsetheadermargin[header sample][text sample]{mode: t, b, c, a}{margin/offset} +% Differentially adjusts \topmargin and \headsep (such that their sum is unchanged) +% based on the specified header margin. +% Takes into consideration the base 1in offset, \headheight, \topskip, and (by default) +% the actual height (or depth) of the \IEEEdefaultheadersampletext and +% \IEEEdefaultsampletext text. +% The available modes are: +% t = top margin (top of the header text to the top of the page) +% b = bottom margin (bottom of the header text to the top of the main text) +% c = vertically centered between the main text and the top of the page, +% with the given offset +% a = adjust the vertical position using the given offset +% For the offsets, positive values move the header downward. +% \headheight, \headsep, \topskip and \topmargin should be set properly before +% calling this function. +\def\IEEEsetheadermargin{\@ifnextchar [{\@IEEEsetheadermargin}{\@IEEEsetheadermargin[\IEEEdefaultheadersampletext]}} +\def\@IEEEsetheadermargin[#1]{\@ifnextchar [{\@@IEEEsetheadermargin[#1]}{\@@IEEEsetheadermargin[#1][\IEEEdefaultsampletext]}} +\def\@@IEEEsetheadermargin[#1][#2]#3#4{\@IEEEtrantmpdimenA #4\relax +\@IEEEextracttoken{#3}\relax +% check for mode errors +\ifx\@IEEEextractedtokenmacro\@empty + \@IEEEclspkgerror{Empty mode type in \string\IEEEsetheadermargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `t'}{Valid modes for \string\IEEEsetheadermargin\space are: t, b, c, and a.}\relax + \let\@IEEEextractedtoken=t\relax + \def\@IEEEextractedtokenmacro{t}\relax +\else + \ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: \string\IEEEsetheadermargin\space mode specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax + \fi +\fi +% handle each mode +\if\@IEEEextractedtoken a\relax + % No need to do anything here and can pass through the adjustment + % value as is. The end adjustment of \topmargin and \headsep will + % do all that is needed +\else +\if\@IEEEextractedtoken c\relax + % get the bottom margin + \@IEEEtrantmpdimenB\headsep\relax + \settodepth{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + \advance\@IEEEtrantmpdimenB by \topskip + \settoheight{\@IEEEtrantmpdimenC}{\begingroup #2\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the actual header bottom margin + % subtract from it the top header margin + \advance\@IEEEtrantmpdimenB -1in\relax % take into consideration the system 1in offset of the top margin + \advance\@IEEEtrantmpdimenB by -\topmargin + \advance\@IEEEtrantmpdimenB by -\headheight + \settoheight{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by \@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the difference between the bottom and top margins + % we need to adjust by half this amount to center the header + \divide\@IEEEtrantmpdimenB by 2\relax + % and add to offset + \advance\@IEEEtrantmpdimenA by \@IEEEtrantmpdimenB +\else +\if\@IEEEextractedtoken b\relax + \@IEEEtrantmpdimenB\headsep\relax + \settodepth{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + \advance\@IEEEtrantmpdimenB by \topskip + \settoheight{\@IEEEtrantmpdimenC}{\begingroup #2\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the actual header bottom margin + % get the difference between the actual and the desired + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenA + \@IEEEtrantmpdimenA\@IEEEtrantmpdimenB +\else + \if\@IEEEextractedtoken t\relax + \else + \@IEEEclspkgerror{Unknown mode type `\@IEEEextractedtokenmacro' in \string\IEEEsetheadermargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `t'}% + {Valid modes for \string\IEEEsetheadermargin\space are: t, b, c and a.}\relax + \fi + \@IEEEtrantmpdimenB 1in\relax % take into consideration the system 1in offset of the top margin + \advance\@IEEEtrantmpdimenB by \topmargin + \advance\@IEEEtrantmpdimenB by \headheight + \settoheight{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the actual header top margin + % get the difference between the desired and the actual + \advance\@IEEEtrantmpdimenA by -\@IEEEtrantmpdimenB +\fi\fi % if t, b, c +\fi % if a +% advance \topmargin by the needed amount and reduce \headsep by the same +% so as not to disturb the location of the main text +\advance\topmargin by \@IEEEtrantmpdimenA\relax +\advance\headsep by -\@IEEEtrantmpdimenA\relax +} + + + +% usage: \IEEEsetfootermargin[footer sample][text sample]{mode: t, b, c, a}{margin/offset} +% Adjusts \footskip based on the specified footer margin. +% Takes into consideration the base 1in offset, \paperheight, \headheight, +% \headsep, \textheight and (by default) the actual height (or depth) of the +% \IEEEdefaultfootersampletext and \IEEEdefaultsampletext text. +% The available modes are: +% t = top margin (top of the footer text to the bottom of the main text) +% b = bottom margin (bottom of the footer text to the bottom of page) +% c = vertically centered between the main text and the bottom of the page, +% with the given offset +% a = adjust the vertical position using the given offset +% For the offsets, positive values move the footer downward. +% \headheight, \headsep, \topskip, \topmargin, and \textheight should be set +% properly before calling this function. +\def\IEEEsetfootermargin{\@ifnextchar [{\@IEEEsetfootermargin}{\@IEEEsetfootermargin[\IEEEdefaultfootersampletext]}} +\def\@IEEEsetfootermargin[#1]{\@ifnextchar [{\@@IEEEsetfootermargin[#1]}{\@@IEEEsetfootermargin[#1][\IEEEdefaultsampletext]}} +\def\@@IEEEsetfootermargin[#1][#2]#3#4{\@IEEEtrantmpdimenA #4\relax +\@IEEEextracttoken{#3}\relax +% check for mode errors +\ifx\@IEEEextractedtokenmacro\@empty + \@IEEEclspkgerror{Empty mode type in \string\IEEEsetfootermargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `t'}{Valid modes for \string\IEEEsetfootermargin\space are: t, b, c, and a.}\relax + \let\@IEEEextractedtoken=t\relax + \def\@IEEEextractedtokenmacro{t}\relax +\else + \ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: \string\IEEEsetfootermargin\space mode specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax + \fi +\fi +% handle each mode +\if\@IEEEextractedtoken a\relax + % No need to do anything here and can pass through the adjustment + % value as is. The end adjustment of \footskip will do all that + % is needed +\else +\if\@IEEEextractedtoken c\relax + % calculate the bottom margin + \@IEEEtrantmpdimenB 1in\relax % system 1in offset + \advance\@IEEEtrantmpdimenB\topmargin\relax + \advance\@IEEEtrantmpdimenB\headheight\relax + \advance\@IEEEtrantmpdimenB\headsep\relax + \advance\@IEEEtrantmpdimenB\textheight\relax + \advance\@IEEEtrantmpdimenB\footskip\relax + \settodepth{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenC by \@IEEEtrantmpdimenB + \@IEEEtrantmpdimenB\paperheight + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the actual footer bottom margin + % now subtract off the footer top margin + \advance\@IEEEtrantmpdimenB -\footskip\relax + \settodepth{\@IEEEtrantmpdimenC}{\begingroup #2\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by \@IEEEtrantmpdimenC + \settoheight{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by \@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the difference between the bottom + % and top footer margins + % our adjustment must be half this value to center the footer + \divide\@IEEEtrantmpdimenB by 2\relax + % add to the offset + \advance\@IEEEtrantmpdimenA by \@IEEEtrantmpdimenB +\else +\if\@IEEEextractedtoken b\relax + % calculate the bottom margin + \@IEEEtrantmpdimenB 1in\relax % system 1in offset + \advance\@IEEEtrantmpdimenB\topmargin\relax + \advance\@IEEEtrantmpdimenB\headheight\relax + \advance\@IEEEtrantmpdimenB\headsep\relax + \advance\@IEEEtrantmpdimenB\textheight\relax + \advance\@IEEEtrantmpdimenB\footskip\relax + \settodepth{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenC by \@IEEEtrantmpdimenB + \@IEEEtrantmpdimenB\paperheight + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the actual footer bottom margin + % get the difference between the actual and the desired + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenA + \@IEEEtrantmpdimenA\@IEEEtrantmpdimenB +\else + \if\@IEEEextractedtoken t\relax + \else + \@IEEEclspkgerror{Unknown mode type `\@IEEEextractedtokenmacro' in \string\IEEEsetfootermargin\space (line \the\inputlineno).\MessageBreak + Defaulting to `t'}% + {Valid modes for \string\IEEEsetfootermargin\space are: t, b, c and a.}\relax + \fi + \@IEEEtrantmpdimenB\footskip\relax + \settodepth{\@IEEEtrantmpdimenC}{\begingroup #2\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + \settoheight{\@IEEEtrantmpdimenC}{\begingroup #1\relax\relax\relax\endgroup}\relax + \advance\@IEEEtrantmpdimenB by -\@IEEEtrantmpdimenC + % at this point \@IEEEtrantmpdimenB has the actual footer top margin + % get the difference between the desired and the actual + \advance\@IEEEtrantmpdimenA by -\@IEEEtrantmpdimenB +\fi\fi % if t, b, c +\fi % if a +% advance \footskip by the needed amount +\advance\footskip by \@IEEEtrantmpdimenA\relax +} + +% -- End V1.8a page setup commands -- + + + + + +% V1.6 +% LaTeX is a little to quick to use hyphenations +% So, we increase the penalty for their use and raise +% the badness level that triggers an underfull hbox +% warning. The author may still have to tweak things, +% but the appearance will be much better "right out +% of the box" than that under V1.5 and prior. +% TeX default is 50 +\hyphenpenalty=750 +\ifCLASSOPTIONcompsoc +\hyphenpenalty 500 +\fi +% If we didn't adjust the interword spacing, 2200 might be better. +% The TeX default is 1000 +\hbadness=1350 +% The IEEE does not use extra spacing after punctuation +\frenchspacing + +% V1.7 increase this a tad to discourage equation breaks +\binoppenalty=1000 % default 700 +\relpenalty=800 % default 500 + +% v1.8a increase these to discourage widows and orphans +\clubpenalty=1000 % default 150 +\widowpenalty=1000 % default 150 +\displaywidowpenalty=1000 % default 50 + + +% margin note stuff +\marginparsep 10pt +\marginparwidth 20pt +\marginparpush 25pt + + +% if things get too close, go ahead and let them touch +\lineskip 0pt +\normallineskip 0pt +\lineskiplimit 0pt +\normallineskiplimit 0pt + +% The distance from the lower edge of the text body to the +% footline +\footskip 0.4in + +% normally zero, should be relative to font height. +% put in a little rubber to help stop some bad breaks (underfull vboxes) +\parskip 0ex plus 0.2ex minus 0.1ex + +\parindent 1.0em +\ifCLASSOPTIONcompsoc + \parindent 1.5em +\fi + +\headheight 12pt +\headsep 18pt +% use the normal font baselineskip +% so that \topskip is unaffected by changes in \baselinestretch +\topskip=\@IEEEnormalsizeunitybaselineskip + + +% V1.8 \maxdepth defaults to 4pt, but should be font size dependent +\maxdepth=0.5\@IEEEnormalsizeunitybaselineskip +\textheight 58pc % 9.63in, 696pt + +% set the default top margin to 58pt +% which results in a \topmargin of -49.59pt for 10pt documents +\IEEEsettopmargin{t}{58pt} +% tweak textheight to a perfect integer number of lines/column. +% standard is: 9pt/63 lpc; 10pt/58 lpc; 11pt/52 lpc; 12pt/50 lpc +\IEEEquantizetextheight{c} +% tweak top margin so that the error is shared equally at the top and bottom +\IEEEsettopmargin{q}{0sp} + + +\columnsep 1pc +\textwidth 43pc % 2 x 21pc + 1pc = 43pc + +% set the default side margins to center the text +\IEEEsetsidemargin{c}{0pt} + + +% adjust margins for default conference mode +\ifCLASSOPTIONconference + \textheight 9.25in % The standard for conferences (668.4975pt) + \IEEEsettopmargin{t}{0.75in} + % tweak textheight to a perfect integer number of lines/page. + % standard is: 9pt/61 lpc; 10pt/56 lpc; 11pt/50 lpc; 12pt/48 lpc + \IEEEquantizetextheight{c} + % tweak top margin so that the error is shared equally at the top and bottom + \IEEEsettopmargin{q}{0sp} +\fi + + +% compsoc text sizes, margins and spacings +\ifCLASSOPTIONcompsoc + \columnsep 12bp + % CS specs for \textwdith are 6.875in + % \textwidth 6.875in + % however, measurements from proofs show they are using 3.5in columns + \textwidth 7in + \advance\textwidth by \columnsep + % set the side margins to center the text + \IEEEsetsidemargin{c}{0pt} + % top/bottom margins to center + % could just set \textheight to 9.75in for all the different paper sizes + % and then quantize, but we'll do it the long way here to allow for easy + % future per-paper size adjustments + \IEEEsettextheight{0.625in}{0.625in}% 11in - 2 * 0.625in = 9.75in is the standard text height for compsoc journals + \IEEEsettopmargin{t}{0.625in} + \if@IEEEusingcspaper + \IEEEsettextheight{0.5in}{0.5in}% 10.75in - 2 * 0.5in = 9.75in + \IEEEsettopmargin{t}{0.5in} + \fi + \if@IEEEusingAfourpaper + \IEEEsettextheight{24.675mm}{24.675mm}% 297mm - 2 * 24.675mm = 247.650mm (9.75in) + \IEEEsettopmargin{t}{24.675mm} + \fi + % tweak textheight to a perfect integer number of lines/page. + % standard is: 9pt/65 lpc; 10pt/61 lpc; 11pt/53 lpc; 12pt/49 lpc + \IEEEquantizetextheight{c} + % tweak top margin so that the error is shared equally at the top and bottom + \IEEEsettopmargin{q}{0sp} + +% compsoc conference + \ifCLASSOPTIONconference + % compsoc conference use a larger value for columnsep + \columnsep 0.25in + \IEEEsettextwidth{0.75in}{0.75in} + % set the side margins to center the text (0.75in for letterpaper) + \IEEEsetsidemargin{c}{0pt} + % compsoc conferences want 1in top and bottom margin + \IEEEsettextheight{1in}{1in} + \IEEEsettopmargin{t}{1in} + % tweak textheight to a perfect integer number of lines/page. + % standard is: 9pt/58 lpc; 10pt/53 lpc; 11pt/48 lpc; 12pt/46 lpc + \IEEEquantizetextheight{c} + % tweak top margin so that the error is shared equally at the top and bottom + \IEEEsettopmargin{q}{0sp} + \fi +\fi + + + +% draft mode settings override that of all other modes +% provides a nice 1in margin all around the paper and extra +% space between the lines for editor's comments +\ifCLASSOPTIONdraftcls + % we want 1in side margins regardless of paper type + \IEEEsettextwidth{1in}{1in} + \IEEEsetsidemargin{c}{0pt} + % want 1in top and bottom margins + \IEEEsettextheight{1in}{1in} + \IEEEsettopmargin{t}{1in} + % digitize textheight to be an integer number of lines. + % this may cause the top and bottom margins to be off a tad + \IEEEquantizetextheight{c} + % tweak top margin so that the error is shared equally at the top and bottom + \IEEEsettopmargin{q}{0sp} +\fi + + + +% process CLASSINPUT inner/outer margin +% if inner margin defined, but outer margin not, set outer to inner. +\ifx\CLASSINPUTinnersidemargin\@IEEEundefined +\else + \ifx\CLASSINPUToutersidemargin\@IEEEundefined + \edef\CLASSINPUToutersidemargin{\CLASSINPUTinnersidemargin} + \fi +\fi + +\ifx\CLASSINPUToutersidemargin\@IEEEundefined +\else + % if outer margin defined, but inner margin not, set inner to outer. + \ifx\CLASSINPUTinnersidemargin\@IEEEundefined + \edef\CLASSINPUTinnersidemargin{\CLASSINPUToutersidemargin} + \fi + \IEEEsettextwidth{\CLASSINPUTinnersidemargin}{\CLASSINPUToutersidemargin} + \IEEEsetsidemargin{i}{\CLASSINPUTinnersidemargin} + \typeout{** ATTENTION: Overriding inner side margin to \CLASSINPUTinnersidemargin\space and + outer side margin to \CLASSINPUToutersidemargin\space via \string\CLASSINPUT.} +\fi + + + +% process CLASSINPUT top/bottom text margin +% if toptext margin defined, but bottomtext margin not, set bottomtext to toptext margin +\ifx\CLASSINPUTtoptextmargin\@IEEEundefined +\else + \ifx\CLASSINPUTbottomtextmargin\@IEEEundefined + \edef\CLASSINPUTbottomtextmargin{\CLASSINPUTtoptextmargin} + \fi +\fi + +\ifx\CLASSINPUTbottomtextmargin\@IEEEundefined +\else + % if bottomtext margin defined, but toptext margin not, set toptext to bottomtext margin + \ifx\CLASSINPUTtoptextmargin\@IEEEundefined + \edef\CLASSINPUTtoptextmargin{\CLASSINPUTbottomtextmargin} + \fi + \IEEEsettextheight{\CLASSINPUTtoptextmargin}{\CLASSINPUTbottomtextmargin} + \IEEEsettopmargin{t}{\CLASSINPUTtoptextmargin} + \typeout{** ATTENTION: Overriding top text margin to \CLASSINPUTtoptextmargin\space and + bottom text margin to \CLASSINPUTbottomtextmargin\space via \string\CLASSINPUT.} +\fi + + + +% default to center header and footer text in the margins +\IEEEsetheadermargin{c}{0pt} +\IEEEsetfootermargin{c}{0pt} + +% adjust header and footer positions for compsoc journals +\ifCLASSOPTIONcompsoc + \ifCLASSOPTIONjournal + \IEEEsetheadermargin{b}{\@IEEEnormalsizeunitybaselineskip} + \IEEEsetfootermargin{t}{\@IEEEnormalsizeunitybaselineskip} + \fi +\fi + + +% V1.8a display lines per column info message on user's console +\def\IEEEdisplayinfolinespercolumn{\@IEEEtrantmpdimenA=\textheight +% topskip represents only one line even if > baselineskip +\advance\@IEEEtrantmpdimenA by -1\topskip +\@IEEEtrantmpcountA=\@IEEEtrantmpdimenA +\@IEEEtrantmpcountB=\@IEEEtrantmpdimenA +\divide\@IEEEtrantmpcountB by \baselineskip +% need to add one line to include topskip (first) line +\advance\@IEEEtrantmpcountB by 1 +% save lines per column value as text +\edef\@IEEEnumlinespercolumninfotxt{\the\@IEEEtrantmpcountB} +% backout topskip advance to allow direct \@IEEEtrantmpcountA comparison +\advance\@IEEEtrantmpcountB by -1 +% restore value as text height (without topskip) rather than just as number of lines +\multiply\@IEEEtrantmpcountB by \baselineskip +% is the column height an integer number of lines per column? +\ifnum\@IEEEtrantmpcountA=\@IEEEtrantmpcountB +\edef\@IEEEnumlinespercolumnexactinfotxt{exact} +\else +\@IEEEtrantmpdimenA\@IEEEtrantmpcountA sp\relax +\advance\@IEEEtrantmpdimenA by -\@IEEEtrantmpcountB sp\relax +\edef\@IEEEnumlinespercolumnexactinfotxt{approximate, difference = \the\@IEEEtrantmpdimenA} +\fi +\typeout{-- Lines per column: \@IEEEnumlinespercolumninfotxt\space (\@IEEEnumlinespercolumnexactinfotxt).}} +% delay execution till start of document to allow for user changes +\AtBeginDocument{\IEEEdisplayinfolinespercolumn} + + + +% LIST SPACING CONTROLS + +% Controls the amount of EXTRA spacing +% above and below \trivlist +% Both \list and IED lists override this. +% However, \trivlist will use this as will most +% things built from \trivlist like the \center +% environment. +\topsep 0.5\baselineskip + +% Controls the additional spacing around lists preceded +% or followed by blank lines. the IEEE does not increase +% spacing before or after paragraphs so it is set to zero. +% \z@ is the same as zero, but faster. +\partopsep \z@ + +% Controls the spacing between paragraphs in lists. +% The IEEE does not increase spacing before or after paragraphs +% so this is also zero. +% With IEEEtran.cls, global changes to +% this value DO affect lists (but not IED lists). +\parsep \z@ + +% Controls the extra spacing between list items. +% The IEEE does not put extra spacing between items. +% With IEEEtran.cls, global changes to this value DO affect +% lists (but not IED lists). +\itemsep \z@ + +% \itemindent is the amount to indent the FIRST line of a list +% item. It is auto set to zero within the \list environment. To alter +% it, you have to do so when you call the \list. +% However, the IEEE uses this for the theorem environment +% There is an alternative value for this near \leftmargini below +\itemindent -1em + +% \leftmargin, the spacing from the left margin of the main text to +% the left of the main body of a list item is set by \list. +% Hence this statement does nothing for lists. +% But, quote and verse do use it for indention. +\leftmargin 2em + +% we retain this stuff from the older IEEEtran.cls so that \list +% will work the same way as before. However, itemize, enumerate and +% description (IED) could care less about what these are as they +% all are overridden. +\leftmargini 2em +%\itemindent 2em % Alternative values: sometimes used. +%\leftmargini 0em +\leftmarginii 1em +\leftmarginiii 1.5em +\leftmarginiv 1.5em +\leftmarginv 1.0em +\leftmarginvi 1.0em +\labelsep 0.5em +\labelwidth \z@ + + +% The old IEEEtran.cls behavior of \list is retained. +% However, the new V1.3 IED list environments override all the +% @list stuff (\@listX is called within \list for the +% appropriate level just before the user's list_decl is called). +% \topsep is now 2pt as the IEEE puts a little extra space around +% lists - used by those non-IED macros that depend on \list. +% Note that \parsep and \itemsep are not redefined as in +% the sizexx.clo \@listX (which article.cls uses) so global changes +% of these values DO affect \list +% +\def\@listi{\leftmargin\leftmargini \topsep 2pt plus 1pt minus 1pt} +\let\@listI\@listi +\def\@listii{\leftmargin\leftmarginii\labelwidth\leftmarginii% + \advance\labelwidth-\labelsep \topsep 2pt} +\def\@listiii{\leftmargin\leftmarginiii\labelwidth\leftmarginiii% + \advance\labelwidth-\labelsep \topsep 2pt} +\def\@listiv{\leftmargin\leftmarginiv\labelwidth\leftmarginiv% + \advance\labelwidth-\labelsep \topsep 2pt} +\def\@listv{\leftmargin\leftmarginv\labelwidth\leftmarginv% + \advance\labelwidth-\labelsep \topsep 2pt} +\def\@listvi{\leftmargin\leftmarginvi\labelwidth\leftmarginvi% + \advance\labelwidth-\labelsep \topsep 2pt} + + +% The IEEE uses 5) not 5. +\def\labelenumi{\theenumi)} \def\theenumi{\arabic{enumi}} + +% The IEEE uses a) not (a) +\def\labelenumii{\theenumii)} \def\theenumii{\alph{enumii}} + +% The IEEE uses iii) not iii. +\def\labelenumiii{\theenumiii)} \def\theenumiii{\roman{enumiii}} + +% The IEEE uses A) not A. +\def\labelenumiv{\theenumiv)} \def\theenumiv{\Alph{enumiv}} + +% exactly the same as in article.cls +\def\p@enumii{\theenumi} +\def\p@enumiii{\theenumi(\theenumii)} +\def\p@enumiv{\p@enumiii\theenumiii} + +% itemized list label styles +\def\labelitemi{$\scriptstyle\bullet$} +\def\labelitemii{\textbf{--}} +\def\labelitemiii{$\ast$} +\def\labelitemiv{$\cdot$} + + + +% **** V1.3 ENHANCEMENTS **** +% Itemize, Enumerate and Description (IED) List Controls +% *************************** +% +% +% The IEEE seems to use at least two different values by +% which ITEMIZED list labels are indented to the right +% For The Journal of Lightwave Technology (JLT) and The Journal +% on Selected Areas in Communications (JSAC), they tend to use +% an indention equal to \parindent. For Transactions on Communications +% they tend to indent ITEMIZED lists a little more--- 1.3\parindent. +% We'll provide both values here for you so that you can choose +% which one you like in your document using a command such as: +% setlength{\IEEEilabelindent}{\IEEEilabelindentB} +\newdimen\IEEEilabelindentA +\IEEEilabelindentA \parindent + +\newdimen\IEEEilabelindentB +\IEEEilabelindentB 1.3\parindent +% However, we'll default to using \parindent +% which makes more sense to me +\newdimen\IEEEilabelindent +\IEEEilabelindent \IEEEilabelindentA + + +% This controls the default amount the enumerated list labels +% are indented to the right. +% Normally, this is the same as the paragraph indention +\newdimen\IEEEelabelindent +\IEEEelabelindent \parindent + +% This controls the default amount the description list labels +% are indented to the right. +% Normally, this is the same as the paragraph indention +\newdimen\IEEEdlabelindent +\IEEEdlabelindent \parindent + +% This is the value actually used within the IED lists. +% The IED environments automatically set its value to +% one of the three values above, so global changes do +% not have any effect +\newdimen\IEEElabelindent +\IEEElabelindent \parindent + +% The actual amount labels will be indented is +% \IEEElabelindent multiplied by the factor below +% corresponding to the level of nesting depth +% This provides a means by which the user can +% alter the effective \IEEElabelindent for deeper +% levels +% There may not be such a thing as correct "standard IEEE" +% values. What the IEEE actually does may depend on the specific +% circumstances. +% The first list level almost always has full indention. +% The second levels I've seen have only 75% of the normal indentation +% Three level or greater nestings are very rare. I am guessing +% that they don't use any indentation. +\def\IEEElabelindentfactori{1.0} % almost always one +\def\IEEElabelindentfactorii{0.75} % 0.0 or 1.0 may be used in some cases +\def\IEEElabelindentfactoriii{0.0} % 0.75? 0.5? 0.0? +\def\IEEElabelindentfactoriv{0.0} +\def\IEEElabelindentfactorv{0.0} +\def\IEEElabelindentfactorvi{0.0} + +% value actually used within IED lists, it is auto +% set to one of the 6 values above +% global changes here have no effect +\def\IEEElabelindentfactor{1.0} + +% This controls the default spacing between the end of the IED +% list labels and the list text, when normal text is used for +% the labels. +% compsoc uses a larger value here, but we'll set that later +% in the class so that this code block area can be extracted +% as-is for IEEEtrantools.sty +\newdimen\IEEEiednormlabelsep +\IEEEiednormlabelsep 0.6em + +% This controls the default spacing between the end of the IED +% list labels and the list text, when math symbols are used for +% the labels (nomenclature lists). The IEEE usually increases the +% spacing in these cases +\newdimen\IEEEiedmathlabelsep +\IEEEiedmathlabelsep 1.2em + +% This controls the extra vertical separation put above and +% below each IED list. the IEEE usually puts a little extra spacing +% around each list. However, this spacing is barely noticeable. +% compsoc uses a larger value here, but we'll set that later +% in the class so that this code block area can be extracted +% as-is for IEEEtrantools.sty +\newskip\IEEEiedtopsep +\IEEEiedtopsep 2pt plus 1pt minus 1pt + + +% This command is executed within each IED list environment +% at the beginning of the list. You can use this to set the +% parameters for some/all your IED list(s) without disturbing +% global parameters that affect things other than lists. +% i.e., renewcommand{\IEEEiedlistdecl}{\setlength{\labelsep}{5em}} +% will alter the \labelsep for the next list(s) until +% \IEEEiedlistdecl is redefined. +\def\IEEEiedlistdecl{\relax} + +% This command provides an easy way to set \leftmargin based +% on the \labelwidth, \labelsep and the argument \IEEElabelindent +% Usage: \IEEEcalcleftmargin{width-to-indent-the-label} +% output is in the \leftmargin variable, i.e., effectively: +% \leftmargin = argument + \labelwidth + \labelsep +% Note controlled spacing here, shield end of lines with % +\def\IEEEcalcleftmargin#1{\setlength{\leftmargin}{#1}% +\addtolength{\leftmargin}{\labelwidth}% +\addtolength{\leftmargin}{\labelsep}} + +% This command provides an easy way to set \labelwidth to the +% width of the given text. It is the same as +% \settowidth{\labelwidth}{label-text} +% and useful as a shorter alternative. +% Typically used to set \labelwidth to be the width +% of the longest label in the list +\def\IEEEsetlabelwidth#1{\settowidth{\labelwidth}{#1}} + +% When this command is executed, IED lists will use the +% IEEEiedmathlabelsep label separation rather than the normal +% spacing. To have an effect, this command must be executed via +% the \IEEEiedlistdecl or within the option of the IED list +% environments. +\def\IEEEusemathlabelsep{\setlength{\labelsep}{\IEEEiedmathlabelsep}} + +% A flag which controls whether the IED lists automatically +% calculate \leftmargin from \IEEElabelindent, \labelwidth and \labelsep +% Useful if you want to specify your own \leftmargin +% This flag must be set (\IEEEnocalcleftmargintrue or \IEEEnocalcleftmarginfalse) +% via the \IEEEiedlistdecl or within the option of the IED list +% environments to have an effect. +\newif\ifIEEEnocalcleftmargin +\IEEEnocalcleftmarginfalse + +% A flag which controls whether \IEEElabelindent is multiplied by +% the \IEEElabelindentfactor for each list level. +% This flag must be set via the \IEEEiedlistdecl or within the option +% of the IED list environments to have an effect. +\newif\ifIEEEnolabelindentfactor +\IEEEnolabelindentfactorfalse + + +% internal variable to indicate type of IED label +% justification +% 0 - left; 1 - center; 2 - right +\def\@IEEEiedjustify{0} + + +% commands to allow the user to control IED +% label justifications. Use these commands within +% the IED environment option or in the \IEEEiedlistdecl +% Note that changing the normal list justifications +% is nonstandard and the IEEE may not like it if you do so! +% I include these commands as they may be helpful to +% those who are using these enhanced list controls for +% other non-IEEE related LaTeX work. +% itemize and enumerate automatically default to right +% justification, description defaults to left. +\def\IEEEiedlabeljustifyl{\def\@IEEEiedjustify{0}}%left +\def\IEEEiedlabeljustifyc{\def\@IEEEiedjustify{1}}%center +\def\IEEEiedlabeljustifyr{\def\@IEEEiedjustify{2}}%right + + + + +% commands to save to and restore from the list parameter copies +% this allows us to set all the list parameters within +% the list_decl and prevent \list (and its \@list) +% from overriding any of our parameters +% V1.6 use \edefs instead of dimen's to conserve dimen registers +% Note controlled spacing here, shield end of lines with % +\def\@IEEEsavelistparams{\edef\@IEEEiedtopsep{\the\topsep}% +\edef\@IEEEiedlabelwidth{\the\labelwidth}% +\edef\@IEEEiedlabelsep{\the\labelsep}% +\edef\@IEEEiedleftmargin{\the\leftmargin}% +\edef\@IEEEiedpartopsep{\the\partopsep}% +\edef\@IEEEiedparsep{\the\parsep}% +\edef\@IEEEieditemsep{\the\itemsep}% +\edef\@IEEEiedrightmargin{\the\rightmargin}% +\edef\@IEEEiedlistparindent{\the\listparindent}% +\edef\@IEEEieditemindent{\the\itemindent}} + +% Note controlled spacing here +\def\@IEEErestorelistparams{\topsep\@IEEEiedtopsep\relax% +\labelwidth\@IEEEiedlabelwidth\relax% +\labelsep\@IEEEiedlabelsep\relax% +\leftmargin\@IEEEiedleftmargin\relax% +\partopsep\@IEEEiedpartopsep\relax% +\parsep\@IEEEiedparsep\relax% +\itemsep\@IEEEieditemsep\relax% +\rightmargin\@IEEEiedrightmargin\relax% +\listparindent\@IEEEiedlistparindent\relax% +\itemindent\@IEEEieditemindent\relax} + + +% v1.6b provide original LaTeX IED list environments +% note that latex.ltx defines \itemize and \enumerate, but not \description +% which must be created by the base classes +% save original LaTeX itemize and enumerate +\let\LaTeXitemize\itemize +\let\endLaTeXitemize\enditemize +\let\LaTeXenumerate\enumerate +\let\endLaTeXenumerate\endenumerate + +% provide original LaTeX description environment from article.cls +\newenvironment{LaTeXdescription} + {\list{}{\labelwidth\z@ \itemindent-\leftmargin + \let\makelabel\descriptionlabel}} + {\endlist} +\newcommand*\descriptionlabel[1]{\hspace\labelsep + \normalfont\bfseries #1} + + +% override LaTeX's default IED lists +\def\itemize{\@IEEEitemize} +\def\enditemize{\@endIEEEitemize} +\def\enumerate{\@IEEEenumerate} +\def\endenumerate{\@endIEEEenumerate} +\def\description{\@IEEEdescription} +\def\enddescription{\@endIEEEdescription} + +% provide the user with aliases - may help those using packages that +% override itemize, enumerate, or description +\def\IEEEitemize{\@IEEEitemize} +\def\endIEEEitemize{\@endIEEEitemize} +\def\IEEEenumerate{\@IEEEenumerate} +\def\endIEEEenumerate{\@endIEEEenumerate} +\def\IEEEdescription{\@IEEEdescription} +\def\endIEEEdescription{\@endIEEEdescription} + + +% V1.6 we want to keep the IEEEtran IED list definitions as our own internal +% commands so they are protected against redefinition +\def\@IEEEitemize{\@ifnextchar[{\@@IEEEitemize}{\@@IEEEitemize[\relax]}} +\def\@IEEEenumerate{\@ifnextchar[{\@@IEEEenumerate}{\@@IEEEenumerate[\relax]}} +\def\@IEEEdescription{\@ifnextchar[{\@@IEEEdescription}{\@@IEEEdescription[\relax]}} +\def\@endIEEEitemize{\endlist} +\def\@endIEEEenumerate{\endlist} +\def\@endIEEEdescription{\endlist} + + +% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS +% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS +% IEEEtran itemized list MDS 1/2001 +% Note controlled spacing here, shield end of lines with % +\def\@@IEEEitemize[#1]{% + \ifnum\@itemdepth>3\relax\@toodeep\else% + \ifnum\@listdepth>5\relax\@toodeep\else% + \advance\@itemdepth\@ne% + \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% + % get the IEEElabelindentfactor for this level + \advance\@listdepth\@ne% we need to know what the level WILL be + \edef\IEEElabelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}% + \advance\@listdepth-\@ne% undo our increment + \def\@IEEEiedjustify{2}% right justified labels are default + % set other defaults + \IEEEnocalcleftmarginfalse% + \IEEEnolabelindentfactorfalse% + \topsep\IEEEiedtopsep% + \IEEElabelindent\IEEEilabelindent% + \labelsep\IEEEiednormlabelsep% + \partopsep 0ex% + \parsep 0ex% + \itemsep 0ex% + \rightmargin 0em% + \listparindent 0em% + \itemindent 0em% + % calculate the label width + % the user can override this later if + % they specified a \labelwidth + \settowidth{\labelwidth}{\csname labelitem\romannumeral\the\@itemdepth\endcsname}% + \@IEEEsavelistparams% save our list parameters + \list{\csname\@itemitem\endcsname}{% + \@IEEErestorelistparams% override any list{} changes + % to our globals + \let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel + \IEEEiedlistdecl% let user alter parameters + #1\relax% + % If the user has requested not to use the + % IEEElabelindent factor, don't revise \IEEElabelindent + \ifIEEEnolabelindentfactor\relax% + \else\IEEElabelindent=\IEEElabelindentfactor\IEEElabelindent% + \fi% + % Unless the user has requested otherwise, + % calculate our left margin based + % on \IEEElabelindent, \labelwidth and + % \labelsep + \ifIEEEnocalcleftmargin\relax% + \else\IEEEcalcleftmargin{\IEEElabelindent}% + \fi}\fi\fi}% + + +% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS +% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS +% IEEEtran enumerate list MDS 1/2001 +% Note controlled spacing here, shield end of lines with % +\def\@@IEEEenumerate[#1]{% + \ifnum\@enumdepth>3\relax\@toodeep\else% + \ifnum\@listdepth>5\relax\@toodeep\else% + \advance\@enumdepth\@ne% + \edef\@enumctr{enum\romannumeral\the\@enumdepth}% + % get the IEEElabelindentfactor for this level + \advance\@listdepth\@ne% we need to know what the level WILL be + \edef\IEEElabelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}% + \advance\@listdepth-\@ne% undo our increment + \def\@IEEEiedjustify{2}% right justified labels are default + % set other defaults + \IEEEnocalcleftmarginfalse% + \IEEEnolabelindentfactorfalse% + \topsep\IEEEiedtopsep% + \IEEElabelindent\IEEEelabelindent% + \labelsep\IEEEiednormlabelsep% + \partopsep 0ex% + \parsep 0ex% + \itemsep 0ex% + \rightmargin 0em% + \listparindent 0em% + \itemindent 0em% + % calculate the label width + % We'll set it to the width suitable for all labels using + % normalfont 1) to 9) + % The user can override this later + \settowidth{\labelwidth}{9)}% + \@IEEEsavelistparams% save our list parameters + \list{\csname label\@enumctr\endcsname}{\usecounter{\@enumctr}% + \@IEEErestorelistparams% override any list{} changes + % to our globals + \let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel + \IEEEiedlistdecl% let user alter parameters + #1\relax% + % If the user has requested not to use the + % IEEElabelindent factor, don't revise \IEEElabelindent + \ifIEEEnolabelindentfactor\relax% + \else\IEEElabelindent=\IEEElabelindentfactor\IEEElabelindent% + \fi% + % Unless the user has requested otherwise, + % calculate our left margin based + % on \IEEElabelindent, \labelwidth and + % \labelsep + \ifIEEEnocalcleftmargin\relax% + \else\IEEEcalcleftmargin{\IEEElabelindent}% + \fi}\fi\fi}% + + +% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS +% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS +% IEEEtran description list MDS 1/2001 +% Note controlled spacing here, shield end of lines with % +\def\@@IEEEdescription[#1]{% + \ifnum\@listdepth>5\relax\@toodeep\else% + % get the IEEElabelindentfactor for this level + \advance\@listdepth\@ne% we need to know what the level WILL be + \edef\IEEElabelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}% + \advance\@listdepth-\@ne% undo our increment + \def\@IEEEiedjustify{0}% left justified labels are default + % set other defaults + \IEEEnocalcleftmarginfalse% + \IEEEnolabelindentfactorfalse% + \topsep\IEEEiedtopsep% + \IEEElabelindent\IEEEdlabelindent% + % assume normal labelsep + \labelsep\IEEEiednormlabelsep% + \partopsep 0ex% + \parsep 0ex% + \itemsep 0ex% + \rightmargin 0em% + \listparindent 0em% + \itemindent 0em% + % Bogus label width in case the user forgets + % to set it. + % TIP: If you want to see what a variable's width is you + % can use the TeX command \showthe\width-variable to + % display it on the screen during compilation + % (This might be helpful to know when you need to find out + % which label is the widest) + \settowidth{\labelwidth}{Hello}% + \@IEEEsavelistparams% save our list parameters + \list{}{\@IEEErestorelistparams% override any list{} changes + % to our globals + \let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel + \IEEEiedlistdecl% let user alter parameters + #1\relax% + % If the user has requested not to use the + % labelindent factor, don't revise \IEEElabelindent + \ifIEEEnolabelindentfactor\relax% + \else\IEEElabelindent=\IEEElabelindentfactor\IEEElabelindent% + \fi% + % Unless the user has requested otherwise, + % calculate our left margin based + % on \IEEElabelindent, \labelwidth and + % \labelsep + \ifIEEEnocalcleftmargin\relax% + \else\IEEEcalcleftmargin{\IEEElabelindent}\relax% + \fi}\fi} + +% v1.6b we use one makelabel that does justification as needed. +\def\@IEEEiedmakelabel#1{\relax\if\@IEEEiedjustify 0\relax +\makebox[\labelwidth][l]{\normalfont #1}\else +\if\@IEEEiedjustify 1\relax +\makebox[\labelwidth][c]{\normalfont #1}\else +\makebox[\labelwidth][r]{\normalfont #1}\fi\fi} + + +% compsoc uses a larger value for the normal labelsep +% and also extra spacing above and below each list +\ifCLASSOPTIONcompsoc + \IEEEiednormlabelsep 1.2em + \IEEEiedtopsep 6pt plus 3pt minus 3pt +\fi + + +% VERSE and QUOTE +% V1.7 define environments with newenvironment +\newenvironment{verse}{\let\\=\@centercr + \list{}{\itemsep\z@ \itemindent -1.5em \listparindent \itemindent + \rightmargin\leftmargin\advance\leftmargin 1.5em}\item\relax} + {\endlist} +\newenvironment{quotation}{\list{}{\listparindent 1.5em \itemindent\listparindent + \rightmargin\leftmargin \parsep 0pt plus 1pt}\item\relax} + {\endlist} +\newenvironment{quote}{\list{}{\rightmargin\leftmargin}\item\relax} + {\endlist} + + +% \titlepage +% provided only for backward compatibility. \maketitle is the correct +% way to create the title page. +\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn + \else \newpage \fi \thispagestyle{empty}\c@page\z@} +\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi} + +% standard values from article.cls +\arraycolsep 5pt +\arrayrulewidth .4pt +\doublerulesep 2pt + +\tabcolsep 6pt +\tabbingsep 0.5em + + +%% FOOTNOTES +% +%\skip\footins 10pt plus 4pt minus 2pt +% V1.6 respond to changes in font size +% space added above the footnotes (if present) +\skip\footins 0.9\baselineskip plus 0.4\baselineskip minus 0.2\baselineskip + +% V1.6, we need to make \footnotesep responsive to changes +% in \baselineskip or strange spacings will result when in +% draft mode. Here is a little LaTeX secret - \footnotesep +% determines the height of an invisible strut that is placed +% *above* the baseline of footnotes after the first. Since +% LaTeX considers the space for characters to be 0.7\baselineskip +% above the baseline and 0.3\baselineskip below it, we need to +% use 0.7\baselineskip as a \footnotesep to maintain equal spacing +% between all the lines of the footnotes. The IEEE often uses a tad +% more, so use 0.8\baselineskip. This slightly larger value also helps +% the text to clear the footnote marks. Note that \thanks in IEEEtran +% uses its own value of \footnotesep which is set in \maketitle. +{\footnotesize +\global\footnotesep 0.8\baselineskip} + + +\skip\@mpfootins = \skip\footins +\fboxsep = 3pt +\fboxrule = .4pt +% V1.6 use 1em, then use LaTeX2e's \@makefnmark +% Note that the IEEE normally *left* aligns the footnote marks, so we don't need +% box resizing tricks here. +\long\def\@makefntext#1{\parindent 1em\indent\hbox{\@makefnmark}#1}% V1.6 use 1em +% V1.7 compsoc does not use superscipts for footnote marks +\ifCLASSOPTIONcompsoc +\def\@IEEEcompsocmakefnmark{\hbox{\normalfont\@thefnmark.\ }} +\long\def\@makefntext#1{\parindent 1em\indent\hbox{\@IEEEcompsocmakefnmark}#1} +\fi + +% The IEEE does not use footnote rules +\def\footnoterule{} + +% V1.7 for compsoc, the IEEE uses a footnote rule only for \thanks. We devise a "one-shot" +% system to implement this. +\newif\if@IEEEenableoneshotfootnoterule +\@IEEEenableoneshotfootnoterulefalse +\ifCLASSOPTIONcompsoc +\def\footnoterule{\relax\if@IEEEenableoneshotfootnoterule +\kern-5pt +\hbox to \columnwidth{\hfill\vrule width 0.5\columnwidth height 0.4pt\hfill} +\kern4.6pt +\global\@IEEEenableoneshotfootnoterulefalse +\else +\relax +\fi} +\fi + +% V1.6 do not allow LaTeX to break a footnote across multiple pages +\interfootnotelinepenalty=10000 + +% V1.6 discourage breaks within equations +% Note that amsmath normally sets this to 10000, +% but LaTeX2e normally uses 100. +\interdisplaylinepenalty=2500 + +% default allows section depth up to /paragraph +\setcounter{secnumdepth}{4} + +% technotes do not allow /paragraph +\ifCLASSOPTIONtechnote + \setcounter{secnumdepth}{3} +\fi +% neither do compsoc conferences +\@IEEEcompsocconfonly{\setcounter{secnumdepth}{3}} + + +\newcounter{section} +\newcounter{subsection}[section] +\newcounter{subsubsection}[subsection] +\newcounter{paragraph}[subsubsection] + +% used only by IEEEtran's IEEEeqnarray as other packages may +% have their own, different, implementations +\newcounter{IEEEsubequation}[equation] + +% as shown when called by user from \ref, \label and in table of contents +\def\theequation{\arabic{equation}} % 1 +\def\theIEEEsubequation{\theequation\alph{IEEEsubequation}} % 1a (used only by IEEEtran's IEEEeqnarray) +\ifCLASSOPTIONcompsoc +% compsoc is all arabic +\def\thesection{\arabic{section}} +\def\thesubsection{\thesection.\arabic{subsection}} +\def\thesubsubsection{\thesubsection.\arabic{subsubsection}} +\def\theparagraph{\thesubsubsection.\arabic{paragraph}} +\else +\def\thesection{\Roman{section}} % I +% V1.7, \mbox prevents breaks around - +\def\thesubsection{\mbox{\thesection-\Alph{subsection}}} % I-A +% V1.7 use I-A1 format used by the IEEE rather than I-A.1 +\def\thesubsubsection{\thesubsection\arabic{subsubsection}} % I-A1 +\def\theparagraph{\thesubsubsection\alph{paragraph}} % I-A1a +\fi + +% From Heiko Oberdiek. Because of the \mbox in \thesubsection, we need to +% tell hyperref to disable the \mbox command when making PDF bookmarks. +% This done already with hyperref.sty version 6.74o and later, but +% it will not hurt to do it here again for users of older versions. +\@ifundefined{pdfstringdefPreHook}{\let\pdfstringdefPreHook\@empty}{}% +\g@addto@macro\pdfstringdefPreHook{\let\mbox\relax} + + +% Main text forms (how shown in main text headings) +% V1.6, using \thesection in \thesectiondis allows changes +% in the former to automatically appear in the latter +\ifCLASSOPTIONcompsoc + \ifCLASSOPTIONconference% compsoc conference + \def\thesectiondis{\thesection.} + \def\thesubsectiondis{\thesectiondis\arabic{subsection}.} + \def\thesubsubsectiondis{\thesubsectiondis\arabic{subsubsection}.} + \def\theparagraphdis{\thesubsubsectiondis\arabic{paragraph}.} + \else% compsoc not conferencs + \def\thesectiondis{\thesection} + \def\thesubsectiondis{\thesectiondis.\arabic{subsection}} + \def\thesubsubsectiondis{\thesubsectiondis.\arabic{subsubsection}} + \def\theparagraphdis{\thesubsubsectiondis.\arabic{paragraph}} + \fi +\else% not compsoc + \def\thesectiondis{\thesection.} % I. + \def\thesubsectiondis{\Alph{subsection}.} % B. + \def\thesubsubsectiondis{\arabic{subsubsection})} % 3) + \def\theparagraphdis{\alph{paragraph})} % d) +\fi + +% just like LaTeX2e's \@eqnnum +\def\theequationdis{{\normalfont \normalcolor (\theequation)}}% (1) +% IEEEsubequation used only by IEEEtran's IEEEeqnarray +\def\theIEEEsubequationdis{{\normalfont \normalcolor (\theIEEEsubequation)}}% (1a) +% redirect LaTeX2e's equation number display and all that depend on +% it, through IEEEtran's \theequationdis +\def\@eqnnum{\theequationdis} + + + +% V1.7 provide string macros as article.cls does +\def\contentsname{Contents} +\def\listfigurename{List of Figures} +\def\listtablename{List of Tables} +\def\refname{References} +\def\indexname{Index} +\def\figurename{Fig.} +\def\tablename{TABLE} +\@IEEEcompsocconfonly{\def\figurename{Figure}} +\def\partname{Part} +\def\appendixname{Appendix} +\def\abstractname{Abstract} +% IEEE specific names +\def\IEEEkeywordsname{Index Terms} +\def\IEEEproofname{Proof} + + +% LIST OF FIGURES AND TABLES AND TABLE OF CONTENTS +% +\def\@pnumwidth{1.55em} +\def\@tocrmarg{2.55em} +\def\@dotsep{4.5} +\setcounter{tocdepth}{3} + +% adjusted some spacings here so that section numbers will not easily +% collide with the section titles. +% VIII; VIII-A; and VIII-A.1 are usually the worst offenders. +% MDS 1/2001 +\def\tableofcontents{\section*{\contentsname}\@starttoc{toc}} +\def\l@section#1#2{\addpenalty{\@secpenalty}\addvspace{1.0em plus 1pt}% + \@tempdima 2.75em \begingroup \parindent \z@ \rightskip \@pnumwidth% + \parfillskip-\@pnumwidth {\bfseries\leavevmode #1}\hfil\hbox to\@pnumwidth{\hss #2}\par% + \endgroup} +% argument format #1:level, #2:labelindent,#3:labelsep +\def\l@subsection{\@dottedtocline{2}{2.75em}{3.75em}} +\def\l@subsubsection{\@dottedtocline{3}{6.5em}{4.5em}} +% must provide \l@ defs for ALL sublevels EVEN if tocdepth +% is such as they will not appear in the table of contents +% these defs are how TOC knows what level these things are! +\def\l@paragraph{\@dottedtocline{4}{6.5em}{5.5em}} +\def\l@subparagraph{\@dottedtocline{5}{6.5em}{6.5em}} +\def\listoffigures{\section*{\listfigurename}\@starttoc{lof}} +\def\l@figure{\@dottedtocline{1}{0em}{2.75em}} +\def\listoftables{\section*{\listtablename}\@starttoc{lot}} +\let\l@table\l@figure + + +% Definitions for floats +% +% Normal Floats +% V1.8 floatsep et al. revised down by 0.15\baselineskip +% to account for the sideeffects of \topskip compensation +\floatsep 0.85\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip +\textfloatsep 1.55\baselineskip plus 0.2\baselineskip minus 0.4\baselineskip +\@fptop 0pt plus 1fil +\@fpsep 0.75\baselineskip plus 2fil +\@fpbot 0pt plus 1fil +\def\topfraction{0.9} +\def\bottomfraction{0.4} +\def\floatpagefraction{0.8} +% V1.7, let top floats approach 90% of page +\def\textfraction{0.1} + +% Double Column Floats +\dblfloatsep 0.85\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip + +\dbltextfloatsep 1.55\baselineskip plus 0.2\baselineskip minus 0.4\baselineskip +% Note that it would be nice if the rubber here actually worked in LaTeX2e. +% There is a long standing limitation in LaTeX, first discovered (to the best +% of my knowledge) by Alan Jeffrey in 1992. LaTeX ignores the stretchable +% portion of \dbltextfloatsep, and as a result, double column figures can and +% do result in an non-integer number of lines in the main text columns with +% underfull vbox errors as a consequence. A post to comp.text.tex +% by Donald Arseneau confirms that this had not yet been fixed in 1998. +% IEEEtran V1.6 will fix this problem for you in the titles, but it doesn't +% protect you from other double floats. Happy vspace'ing. + +\@dblfptop 0pt plus 1fil +\@dblfpsep 0.75\baselineskip plus 2fil +\@dblfpbot 0pt plus 1fil +\def\dbltopfraction{0.8} +\def\dblfloatpagefraction{0.8} +\setcounter{dbltopnumber}{4} + +\intextsep 0.85\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip +\setcounter{topnumber}{2} +\setcounter{bottomnumber}{2} +\setcounter{totalnumber}{4} + + + +% article class provides these, we should too. +\newlength\abovecaptionskip +\newlength\belowcaptionskip +% but only \abovecaptionskip is used above figure captions and *below* table +% captions +\setlength\abovecaptionskip{0.5\baselineskip} +% compsoc journals are a little more generous +\ifCLASSOPTIONcompsoc\ifCLASSOPTIONjournal + \setlength\abovecaptionskip{0.75\baselineskip} +\fi\fi +\setlength\belowcaptionskip{0pt} +% V1.6 create hooks in case the caption spacing ever needs to be +% overridden by a user +\def\@IEEEfigurecaptionsepspace{\vskip\abovecaptionskip\relax}% +\def\@IEEEtablecaptionsepspace{\vskip\abovecaptionskip\relax}% + + +% 1.6b revise caption system so that \@makecaption uses two arguments +% as with LaTeX2e. Otherwise, there will be problems when using hyperref. +\def\@IEEEtablestring{table} + + +% V1.8 compensate for \topskip so top of top figures align with tops of the first lines of main text +% here we calculate a space equal to the amount \topskip exceeds the main text height +% we hook in at \@floatboxreset +\def\@IEEEfiguretopskipspace{\ifdim\prevdepth=-1000pt\relax +\setlength{\@IEEEtrantmpdimenA}{1\topskip}\relax +\addtolength{\@IEEEtrantmpdimenA}{-0.7\@IEEEnormalsizeunitybaselineskip}\relax +\vspace*{\@IEEEtrantmpdimenA}\fi} +% V1.8 compensate for \topskip at the top of top tables so caption text is on main text baseline +% use a strut set on the caption baseline within \@makecaption +\def\@IEEEtabletopskipstrut{\ifdim\prevdepth=-1000pt\rule{0pt}{\topskip}\fi} +% the \ifdim\prevdepth checks are always expected to be true for IEEE style float caption ordering +% because top of figure content and top of captions in tables is the first thing on the vertical +% list of these floats +% thanks to Donald Arseneau for his 2000/11/11 post "Re: caption hacking" with info on this topic. + + +\ifCLASSOPTIONcompsoc +% V1.7 compsoc \@makecaption +\ifCLASSOPTIONconference% compsoc conference +\long\def\@makecaption#1#2{% +% test if is a for a figure or table +\ifx\@captype\@IEEEtablestring% +% if a table, do table caption +\footnotesize\bgroup\par\centering\@IEEEtabletopskipstrut{\normalfont\footnotesize {#1.}\nobreakspace\scshape #2}\par\addvspace{0.5\baselineskip}\egroup% +\@IEEEtablecaptionsepspace +% if not a table, format it as a figure +\else +\@IEEEfigurecaptionsepspace +\setbox\@tempboxa\hbox{\normalfont\footnotesize {#1.}\nobreakspace #2}% +\ifdim \wd\@tempboxa >\hsize% +% if caption is longer than a line, let it wrap around +\setbox\@tempboxa\hbox{\normalfont\footnotesize {#1.}\nobreakspace}% +\parbox[t]{\hsize}{\normalfont\footnotesize \noindent\unhbox\@tempboxa#2}% +% if caption is shorter than a line, center +\else% +\hbox to\hsize{\normalfont\footnotesize\hfil\box\@tempboxa\hfil}% +\fi\fi} +% +\else% nonconference compsoc +\long\def\@makecaption#1#2{% +% test if is a for a figure or table +\ifx\@captype\@IEEEtablestring% +% if a table, do table caption +\footnotesize\bgroup\par\centering\@IEEEtabletopskipstrut{\normalfont\sffamily\footnotesize #1}\\{\normalfont\sffamily\footnotesize #2}\par\addvspace{0.5\baselineskip}\egroup% +\@IEEEtablecaptionsepspace +% if not a table, format it as a figure +\else +\@IEEEfigurecaptionsepspace +\setbox\@tempboxa\hbox{\normalfont\sffamily\footnotesize {#1.}\nobreakspace #2}% +\ifdim \wd\@tempboxa >\hsize% +% if caption is longer than a line, let it wrap around +\setbox\@tempboxa\hbox{\normalfont\sffamily\footnotesize {#1.}\nobreakspace}% +\parbox[t]{\hsize}{\normalfont\sffamily\footnotesize \noindent\unhbox\@tempboxa#2}% +% if caption is shorter than a line, left justify +\else% +\hbox to\hsize{\normalfont\sffamily\footnotesize\box\@tempboxa\hfil}% +\fi\fi} +\fi +% +\else% traditional noncompsoc \@makecaption +\long\def\@makecaption#1#2{% +% test if is a for a figure or table +\ifx\@captype\@IEEEtablestring% +% if a table, do table caption +\footnotesize\bgroup\par\centering\@IEEEtabletopskipstrut{\normalfont\footnotesize #1}\\{\normalfont\footnotesize\scshape #2}\par\addvspace{0.5\baselineskip}\egroup% +\@IEEEtablecaptionsepspace +% if not a table, format it as a figure +\else +\@IEEEfigurecaptionsepspace +% 3/2001 use footnotesize, not small; use two nonbreaking spaces, not one +\setbox\@tempboxa\hbox{\normalfont\footnotesize {#1.}\nobreakspace\nobreakspace #2}% +\ifdim \wd\@tempboxa >\hsize% +% if caption is longer than a line, let it wrap around +\setbox\@tempboxa\hbox{\normalfont\footnotesize {#1.}\nobreakspace\nobreakspace}% +\parbox[t]{\hsize}{\normalfont\footnotesize\noindent\unhbox\@tempboxa#2}% +% if caption is shorter than a line, center if conference, left justify otherwise +\else% +\ifCLASSOPTIONconference \hbox to\hsize{\normalfont\footnotesize\hfil\box\@tempboxa\hfil}% +\else \hbox to\hsize{\normalfont\footnotesize\box\@tempboxa\hfil}% +\fi\fi\fi} +\fi + + + +% V1.7 disable captions class option, do so in a way that retains operation of \label +% within \caption +\ifCLASSOPTIONcaptionsoff +\long\def\@makecaption#1#2{\vspace*{2em}\footnotesize\bgroup\par\addvspace{0.5\baselineskip}\centering{\footnotesize #1}\par\addvspace{0.5\baselineskip}\egroup% +\let\@IEEEtemporiglabeldefsave\label +\let\@IEEEtemplabelargsave\relax +\def\label##1{\gdef\@IEEEtemplabelargsave{##1}}% +\setbox\@tempboxa\hbox{#2}% +\let\label\@IEEEtemporiglabeldefsave +\ifx\@IEEEtemplabelargsave\relax\else\label{\@IEEEtemplabelargsave}\fi} +\fi + + +% V1.7 define end environments with \def not \let so as to work OK with +% preview-latex +\newcounter{figure} +\def\thefigure{\@arabic\c@figure} +\def\fps@figure{tbp} +\def\ftype@figure{1} +\def\ext@figure{lof} +\def\fnum@figure{\figurename\nobreakspace\thefigure} +% V1.8 within figures add \@IEEEfiguretopskipspace compensation to LaTeX2e's \@floatboxreset +\def\figure{\def\@floatboxreset{\reset@font\normalsize\@setminipage\@IEEEfiguretopskipspace}\@float{figure}} +\def\endfigure{\end@float} +% V1.8 also add \@IEEEfiguretopskipspace compensation to \figure* +\@namedef{figure*}{\def\@floatboxreset{\reset@font\normalsize\@setminipage\@IEEEfiguretopskipspace}\@dblfloat{figure}} +\@namedef{endfigure*}{\end@dblfloat} + +\newcounter{table} +\ifCLASSOPTIONcompsoc +\def\thetable{\arabic{table}} +\else +\def\thetable{\@Roman\c@table} +\fi +\def\fps@table{tbp} +\def\ftype@table{2} +\def\ext@table{lot} +\def\fnum@table{\tablename\nobreakspace\thetable} +% V1.6 The IEEE uses 8pt text for tables +% within tables alter LaTeX2e's \@floatboxreset to use \footnotesize +\def\table{\def\@floatboxreset{\reset@font\footnotesize\@setminipage}\@float{table}} +\def\endtable{\end@float} +% v1.6b double column tables need to default to footnotesize as well. +\@namedef{table*}{\def\@floatboxreset{\reset@font\footnotesize\@setminipage}\@dblfloat{table}} +\@namedef{endtable*}{\end@dblfloat} + + + + +%% -- Command Argument Scanning Support Functions -- +%% V1.8a + +% usage: \@IEEEstripouterbraces*{} +% \@IEEEstripouterbraces fully expands its argument (which it then stores +% in \@IEEEstripouterbracesarg) via \edef, then removes any outer enclosing +% braces, and finally stores the result in the macro +% \@IEEEstrippedouterbraces. +% +% For example: +% \@IEEEstripouterbraces{{{{ab}c}}} +% results in: +% +% \@IEEEstripouterbracesarg ==> a macro containing {{{ab}c}} +% \@IEEEstrippedouterbraces ==> a macro containing {ab}c +% +% the *-star form,\@IEEEstripouterbraces*, does not expand the argument +% contents during processing +\def\@IEEEstripouterbraces{\@ifstar{\let\@IEEEstripouterbracesdef=\def\@@IEEEstripouterbraces}{\let\@IEEEstripouterbracesdef=\edef\@@IEEEstripouterbraces}} + +\def\@@IEEEstripouterbraces#1{\@IEEEstripouterbracesdef\@IEEEstripouterbracesarg{#1}\relax +% If the macro is unchanged after being acquired as a single delimited +% argument, we know we have one sequence of tokens without any enclosing +% braces. Loop until this is true. +\loop + \expandafter\@@@IEEEstripouterbraces\@IEEEstripouterbracesarg\@IEEEgeneralsequenceDELIMITER +\ifx\@IEEEstrippedouterbraces\@IEEEstripouterbracesarg +\else + \let\@IEEEstripouterbracesarg\@IEEEstrippedouterbraces +\repeat} + +\def\@@@IEEEstripouterbraces#1\@IEEEgeneralsequenceDELIMITER{\def\@IEEEstrippedouterbraces{#1}} + + + +% usage: \@IEEEextractgroup*{} +% \@IEEEextractgroup fully expands its argument (which it then stores in +% \@IEEEextractgrouparg) via \edef and then assigns the first "brace group" +% of tokens to the macro \@IEEEextractedgroup. +% The remaining groups, if any, are stored in the macro +% \@IEEEextractedgroupremain. If the argument does not contain the requisite +% groups, the respective macros will be defined to be empty. +% There is an asymmetry in that \@IEEEextractedgroup is stripped of its first +% outer grouping while \@IEEEextractedgroupremain retains even the outer +% grouping (if present) that originally identified it as a group. +% +% For example: +% \@IEEEextractgroup{{{ab}}{c{de}}} +% results in: +% +% \@IEEEextractgrouparg ==> a macro containing {{ab}}{c{de}} +% \@IEEEextractedgroup ==> a macro containing {ab} +% \@IEEEextractedgroupremain ==> a macro containing {c{de}} +% +% The *-star form, \@IEEEextractgroup*, does not expand its argument +% contents during processing. +\def\@IEEEextractgroup{\@ifstar{\let\@IEEEextractgroupdef=\def\@@IEEEextractgroup}{\let\@IEEEextractgroupdef=\edef\@@IEEEextractgroup}} + +\def\@@IEEEextractgroup#1{\@IEEEextractgroupdef\@IEEEextractgrouparg{#1}\relax +% trap the case of an empty extracted group as this would cause problems with +% \@IEEEextractgroupremain's argument acquisition +\ifx\@IEEEextractgrouparg\@empty + \def\@IEEEextractedgroup{}\relax + \def\@IEEEextractedgroupremain{}\relax +\else + % We have to use some dirty tricks here. We want to insert {} around + % whatever remains after the first group so that TeX's argument scanner + % will preserve any originally enclosing braces as well as provide an + % empty argument to acquire even if there isn't a second group. + % In this first of two dirty tricks, we put a } at the end of the structure + % we are going to extract from. The \ifnum0=`{\fi keeps TeX happy to allow + % what would otherwise be an unbalanced macro definition for + % \@@IEEEextractgroup to be acceptable to it. + \ifnum0=`{\fi\expandafter\@IEEEextractgroupremain\@IEEEextractgrouparg}\relax +\fi} + +% In the second part of the dirty tricks, we insert a leading { right after +% the first group is acquired, but before the remainder is. Again, the +% \ifnum0=`}\fi keeps TeX happy during definition time, but will disappear +% during run time. +\def\@IEEEextractgroupremain#1{\def\@IEEEextractedgroup{#1}\expandafter\@@IEEEextractgroupremain\expandafter{\ifnum0=`}\fi} + +\def\@@IEEEextractgroupremain#1{\def\@IEEEextractedgroupremain{#1}} + + + +% \@IEEEextracttoken relocated at top because margin setting commands rely on it + + + +% usage: \@IEEEextracttokengroups*{} +% \@IEEEextracttokengroups fully expands its argument (which it then stores +% in \@IEEEextracttokengroupsarg) and then assigns the first "brace group" of +% tokens (with the outermost braces removed) to the macro +% \@IEEEextractedfirstgroup. +% The meaning of the first nonbrace (but including the empty group) token +% within this first group is assigned via \let to \@IEEEextractedfirsttoken +% as well as stored in the macro \@IEEEextractedfirsttokenmacro. If a first +% nonbrace token does not exist (or is an empty group), these will be \relax +% and empty, respectively. Tokens that would otherwise be discarded during +% the acquisition of the first token in the first group are stored in +% \@IEEEextractedfirsttokensdiscarded, however their original relative brace +% nesting depths are not guaranteed to be preserved. +% The first group within this first group is stored in the macro +% \@IEEEextractedfirstfirstgroup. +% Likewise for the next group after the first: \@IEEEextractednextgroup, +% \@IEEEextractednextfirstgroup, \@IEEEextractednextgroupfirsttoken, +% \@IEEEextractednextgroupfirsttokenmacro, and +% \@IEEEextractednextfirsttokensdiscarded. +% All tokens/groups after the first group, including any enclosing braces, +% are stored in the macro \@IEEEextractedafterfirstgroupremain which will +% be empty if none exist. +% +% For example: +% \@IEEEextracttokengroups{{{ab}{cd}}{{ef}g}} +% will result in: +% +% \@IEEEextracttokengroupsarg ==> a macro containing {{ab}{cd}}{{ef}g} +% \@IEEEextractedfirstgroup ==> a macro containing {ab}{cd} +% \@IEEEextractedafterfirstgroupremain ==> a macro containing {{ef}g} +% \@IEEEextractedfirsttoken ==> the letter a +% \@IEEEextractedfirsttokenmacro ==> a macro containing a +% \@IEEEextractedfirsttokensdiscarded ==> a macro containing bcd +% \@IEEEextractedfirstfirstgroup ==> a macro containing ab +% \@IEEEextractednextgroup ==> a macro containing {ef}g +% \@IEEEextractednextfirsttoken ==> the letter e +% \@IEEEextractednextfirsttokenmacro ==> a macro containing e +% \@IEEEextractednextfirsttokensdiscarded ==> a macro containing fg +% \@IEEEextractednextfirstgroup ==> a macro containing ef +% +% If given an empty argument, \@IEEEextractedfirsttoken and +% \@IEEEextractednextfirsttoken will be set to \relax +% and all the macros will be empty. +% the *-star form, \@IEEEextracttokengroups*, does not expand its argument +% contents during processing. +% +% Depends on: \@IEEEextractgroup, \@IEEEextracttoken +\def\@IEEEextracttokengroups{\@ifstar{\let\@IEEEextracttokengroupsdef=\def\@@IEEEextracttokengroups}{\let\@IEEEextracttokengroupsdef=\edef\@@IEEEextracttokengroups}} +\def\@@IEEEextracttokengroups#1{\@IEEEextracttokengroupsdef\@IEEEextracttokengroupsarg{#1}\relax +% begin extraction, these functions are safe with empty arguments +% first group +\expandafter\@IEEEextractgroup\expandafter*\expandafter{\@IEEEextracttokengroupsarg}\relax +\let\@IEEEextractedfirstgroup\@IEEEextractedgroup +\let\@IEEEextractedafterfirstgroupremain\@IEEEextractedgroupremain +\expandafter\@IEEEextracttoken\expandafter*\expandafter{\@IEEEextractedfirstgroup}\relax +\let\@IEEEextractedfirsttoken\@IEEEextractedtoken +\let\@IEEEextractedfirsttokenmacro\@IEEEextractedtokenmacro +\let\@IEEEextractedfirsttokensdiscarded\@IEEEextractedtokensdiscarded +% first first group +\expandafter\@IEEEextractgroup\expandafter*\expandafter{\@IEEEextractedfirstgroup}\relax +\let\@IEEEextractedfirstfirstgroup\@IEEEextractedgroup +% next group +\expandafter\@IEEEextractgroup\expandafter*\expandafter{\@IEEEextractedafterfirstgroupremain}\relax +\let\@IEEEextractednextgroup\@IEEEextractedgroup +\expandafter\@IEEEextracttoken\expandafter*\expandafter{\@IEEEextractednextgroup}\relax +\let\@IEEEextractednextfirsttoken\@IEEEextractedtoken +\let\@IEEEextractednextfirsttokenmacro\@IEEEextractedtokenmacro +\let\@IEEEextractednextfirsttokensdiscarded\@IEEEextractedtokensdiscarded +% next first group +\expandafter\@IEEEextractgroup\expandafter*\expandafter{\@IEEEextractednextgroup}\relax +\let\@IEEEextractednextfirstgroup\@IEEEextractedgroup} + + +%% -- End of Command Argument Scanning Support Functions -- + + + + +%% +%% START OF IEEEeqnarray DEFINITIONS +%% +%% Inspired by the concepts, examples, and previous works of LaTeX +%% coders and developers such as Donald Arseneau, Fred Bartlett, +%% David Carlisle, Tony Liu, Frank Mittelbach, Piet van Oostrum, +%% Roland Winkler and Mark Wooding. +%% I don't make the claim that my work here is even near their calibre. ;) + + +\newif\if@IEEEeqnarrayboxnojot% flag to indicate if the environment was called as the star form +\@IEEEeqnarrayboxnojotfalse + +\newif\if@advanceIEEEeqncolcnt% tracks if the environment should advance the col counter +% allows a way to make an \IEEEeqnarraybox that can be used within an \IEEEeqnarray +% used by IEEEeqnarraymulticol so that it can work properly in both +\@advanceIEEEeqncolcnttrue + +\newcount\@IEEEeqnnumcols % tracks how many IEEEeqnarray cols are defined +\newcount\@IEEEeqncolcnt % tracks how many IEEEeqnarray cols the user actually used + + +% The default math style used by the columns +\def\IEEEeqnarraymathstyle{\displaystyle} +% The default text style used by the columns +% default to using the current font +\def\IEEEeqnarraytextstyle{\relax} + +% like the iedlistdecl but for \IEEEeqnarray +\def\IEEEeqnarraydecl{\relax} +\def\IEEEeqnarrayboxdecl{\relax} + + + +% V1.8 flags to indicate that equation numbering is to persist +\newif\if@IEEEeqnumpersist% +\@IEEEeqnumpersistfalse +\newif\if@IEEEsubeqnumpersist% +\@IEEEsubeqnumpersistfalse +% +% V1.8 flags to indicate if (sub)equation number of last line was preadvanced +\newif\if@IEEEeqnumpreadv% +\@IEEEeqnumpreadvfalse +\newif\if@IEEEsubeqnumpreadv% +\@IEEEsubeqnumpreadvfalse + +\newcount\@IEEEsubeqnnumrollback% saves previous value of IEEEsubequation number in case we need to restore it + +% \yesnumber is the opposite of \nonumber +% a novel concept with the same def as the equationarray package +% However, we give IEEE versions too since some LaTeX packages such as +% the MDWtools mathenv.sty redefine \nonumber to something else. +% This command is intended for use in non-IEEEeqnarray math environments +\providecommand{\yesnumber}{\global\@eqnswtrue} + + +% IEEEyes/nonumber +% V1.8 add persistant * forms +% These commands can alter the type of equation an IEEEeqnarray line is. +\def\IEEEyesnumber{\@ifstar{\global\@IEEEeqnumpersisttrue\global\@IEEEsubeqnumpersistfalse\@IEEEyesnumber}{\@IEEEyesnumber}} + +\def\@IEEEyesnumber{\global\@eqnswtrue +\if@IEEEeqnarrayISinner% alter counters and label only inside an IEEEeqnarray +\ifnum\c@IEEEsubequation>0\relax + \stepcounter{equation}\setcounter{IEEEsubequation}{0}\gdef\@currentlabel{\p@equation\theequation}\relax + \gdef\@currentHref{\@IEEEtheHrefequation}% setup hyperref label +\fi +% even if we reached this eqn num via a preadv, it is legit now +\global\@IEEEeqnumpreadvfalse\global\@IEEEsubeqnumpreadvfalse +\fi} + +\def\IEEEnonumber{\@ifstar{\global\@IEEEeqnumpersistfalse\global\@IEEEsubeqnumpersistfalse\global\@eqnswfalse}{\global\@eqnswfalse}} + + +\def\IEEEyessubnumber{\@ifstar{\global\@IEEEsubeqnumpersisttrue\@IEEEyessubnumber}{\@IEEEyessubnumber}} +% +\def\@IEEEyessubnumber{\if@IEEEeqnarrayISinner% alter counters and label only inside an IEEEeqnarray + \ifnum\c@IEEEsubequation>0\relax% if it already is a subequation, we are good to go as-is + \else% if we are a regular equation we have to watch out for two cases + \if@IEEEeqnumpreadv% if this equation is the result of a preadvance, backout and bump the sub eqnnum + \global\advance\c@equation\m@ne\global\c@IEEEsubequation=\@IEEEsubeqnnumrollback\addtocounter{IEEEsubequation}{1}\relax + \else% non-preadvanced equations just need initialization of their sub eqnnum + \setcounter{IEEEsubequation}{1}\relax + \fi + \fi% fi already is subequation + \gdef\@currentlabel{\p@IEEEsubequation\theIEEEsubequation}\relax + \gdef\@currentHref{\@IEEEtheHrefsubequation}% setup hyperref label + \global\@IEEEeqnumpreadvfalse\global\@IEEEsubeqnumpreadvfalse% no longer a preadv anymore + \global\@eqnswtrue +\fi} + + +\def\IEEEnosubnumber{\@ifstar{\global\@IEEEsubeqnumpersistfalse\@IEEEnosubnumber}{\@IEEEnosubnumber}} +% +\def\@IEEEnosubnumber{\if@IEEEeqnarrayISinner% alter counters and label only inside an IEEEeqnarray + \if@eqnsw % we do nothing unless we know we will display because we play with the counters here + % if it currently is a subequation, bump up to the next equation number and turn off the subequation + \ifnum\c@IEEEsubequation>0\relax\addtocounter{equation}{1}\setcounter{IEEEsubequation}{0}\relax + \fi + \global\@IEEEeqnumpreadvfalse\global\@IEEEsubeqnumpreadvfalse% no longer a preadv anymore + \gdef\@currentlabel{\p@equation\theequation}\relax + \gdef\@currentHref{\@IEEEtheHrefequation}% setup hyperref label + \fi +\fi} + + + +% allows users to "push away" equations that get too close to the equation numbers +\def\IEEEeqnarraynumspace{\hphantom{\ifnum\c@IEEEsubequation>0\relax\theIEEEsubequationdis\else\theequationdis\fi}} + +% provides a way to span multiple columns within IEEEeqnarray environments +% will consider \if@advanceIEEEeqncolcnt before globally advancing the +% column counter - so as to work within \IEEEeqnarraybox +% usage: \IEEEeqnarraymulticol{number cols. to span}{col type}{cell text} +\long\def\IEEEeqnarraymulticol#1#2#3{\multispan{#1}\relax +% check if column is defined for the precolumn definition +% We have to be careful here because TeX scans for & even within an \iffalse +% where it does not expand macros. So, if we used only one \ifx and a #3 +% appeared in the false branch and the user inserted another alignment +% structure that uses & in the \IEEEeqnarraymulticol{}, TeX will not see that +% there is an inner alignment in the false branch yet still will see any & +% there and will think that they apply to the outer alignment resulting in an +% incomplete \ifx error. +% So, here we use separate checks for the pre and post parts in order to keep +% the #3 outside of all conditionals. +\relax\expandafter\ifx\csname @IEEEeqnarraycolDEF#2\endcsname\@IEEEeqnarraycolisdefined\relax +\csname @IEEEeqnarraycolPRE#2\endcsname +\else% if not, error and use default type +\@IEEEclspkgerror{Invalid column type "#2" in \string\IEEEeqnarraymulticol.\MessageBreak +Using a default centering column instead}% +{You must define IEEEeqnarray column types before use.}% +\csname @IEEEeqnarraycolPRE@IEEEdefault\endcsname +\fi +% The ten \relax are to help prevent misleading error messages in case a user +% accidently inserted a macro that tries to acquire additional arguments. +#3\relax\relax\relax\relax\relax\relax\relax\relax\relax\relax +% check if column is defined for the postcolumn definition +\expandafter\ifx\csname @IEEEeqnarraycolDEF#2\endcsname\@IEEEeqnarraycolisdefined\relax +\csname @IEEEeqnarraycolPOST#2\endcsname +\else% if not, use the default type +\csname @IEEEeqnarraycolPOST@IEEEdefault\endcsname +\fi +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by #1\relax\fi} + +% like \omit, but maintains track of the column counter for \IEEEeqnarray +\def\IEEEeqnarrayomit{\omit\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by 1\relax\fi} + + +% provides a way to define a letter referenced column type +% usage: \IEEEeqnarraydefcol{col. type letter/name}{pre insertion text}{post insertion text} +\def\IEEEeqnarraydefcol#1#2#3{\expandafter\def\csname @IEEEeqnarraycolPRE#1\endcsname{#2}% +\expandafter\def\csname @IEEEeqnarraycolPOST#1\endcsname{#3}% +\expandafter\def\csname @IEEEeqnarraycolDEF#1\endcsname{1}} + + +% provides a way to define a numerically referenced inter-column glue types +% usage: \IEEEeqnarraydefcolsep{col. glue number}{glue definition} +\def\IEEEeqnarraydefcolsep#1#2{\expandafter\def\csname @IEEEeqnarraycolSEP\romannumeral #1\endcsname{#2}% +\expandafter\def\csname @IEEEeqnarraycolSEPDEF\romannumeral #1\endcsname{1}} + + +\def\@IEEEeqnarraycolisdefined{1}% just a macro for 1, used for checking undefined column types + + +% expands and appends the given argument to the \@IEEEtrantmptoksA token list +% used to build up the \halign preamble +\def\@IEEEappendtoksA#1{\edef\@@IEEEappendtoksA{\@IEEEtrantmptoksA={\the\@IEEEtrantmptoksA #1}}% +\@@IEEEappendtoksA} + +% also appends to \@IEEEtrantmptoksA, but does not expand the argument +% uses \toks8 as a scratchpad register +\def\@IEEEappendNOEXPANDtoksA#1{\toks8={#1}% +\edef\@@IEEEappendNOEXPANDtoksA{\@IEEEtrantmptoksA={\the\@IEEEtrantmptoksA\the\toks8}}% +\@@IEEEappendNOEXPANDtoksA} + +% define some common column types for the user +% math +\IEEEeqnarraydefcol{l}{$\IEEEeqnarraymathstyle}{$\hfil} +\IEEEeqnarraydefcol{c}{\hfil$\IEEEeqnarraymathstyle}{$\hfil} +\IEEEeqnarraydefcol{r}{\hfil$\IEEEeqnarraymathstyle}{$} +\IEEEeqnarraydefcol{L}{$\IEEEeqnarraymathstyle{}}{{}$\hfil} +\IEEEeqnarraydefcol{C}{\hfil$\IEEEeqnarraymathstyle{}}{{}$\hfil} +\IEEEeqnarraydefcol{R}{\hfil$\IEEEeqnarraymathstyle{}}{{}$} +% text +\IEEEeqnarraydefcol{s}{\IEEEeqnarraytextstyle}{\hfil} +\IEEEeqnarraydefcol{t}{\hfil\IEEEeqnarraytextstyle}{\hfil} +\IEEEeqnarraydefcol{u}{\hfil\IEEEeqnarraytextstyle}{} + +% vertical rules +\IEEEeqnarraydefcol{v}{}{\vrule width\arrayrulewidth} +\IEEEeqnarraydefcol{vv}{\vrule width\arrayrulewidth\hfil}{\hfil\vrule width\arrayrulewidth} +\IEEEeqnarraydefcol{V}{}{\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth} +\IEEEeqnarraydefcol{VV}{\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth\hfil}% +{\hfil\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth} + +% horizontal rules +\IEEEeqnarraydefcol{h}{}{\leaders\hrule height\arrayrulewidth\hfil} +\IEEEeqnarraydefcol{H}{}{\leaders\vbox{\hrule width\arrayrulewidth\vskip\doublerulesep\hrule width\arrayrulewidth}\hfil} + +% plain +\IEEEeqnarraydefcol{x}{}{} +\IEEEeqnarraydefcol{X}{$}{$} + +% the default column type to use in the event a column type is not defined +\IEEEeqnarraydefcol{@IEEEdefault}{\hfil$\IEEEeqnarraymathstyle}{$\hfil} + + +% a zero tabskip (used for "-" col types) +\def\@IEEEeqnarraycolSEPzero{0pt plus 0pt minus 0pt} +% a centering tabskip (used for "+" col types) +\def\@IEEEeqnarraycolSEPcenter{1000pt plus 0pt minus 1000pt} + +% top level default tabskip glues for the start, end, and inter-column +% may be reset within environments not always at the top level, e.g., \IEEEeqnarraybox +\edef\@IEEEeqnarraycolSEPdefaultstart{\@IEEEeqnarraycolSEPcenter}% default start glue +\edef\@IEEEeqnarraycolSEPdefaultend{\@IEEEeqnarraycolSEPcenter}% default end glue +\edef\@IEEEeqnarraycolSEPdefaultmid{\@IEEEeqnarraycolSEPzero}% default inter-column glue + + + +% creates a vertical rule that extends from the bottom to the top a a cell +% Provided in case other packages redefine \vline some other way. +% usage: \IEEEeqnarrayvrule[rule thickness] +% If no argument is provided, \arrayrulewidth will be used for the rule thickness. +\newcommand\IEEEeqnarrayvrule[1][\arrayrulewidth]{\vrule\@width#1\relax} + +% creates a blank separator row +% usage: \IEEEeqnarrayseprow[separation length][font size commands] +% default is \IEEEeqnarrayseprow[0.25\normalbaselineskip][\relax] +% blank arguments inherit the default values +% uses \skip5 as a scratch register - calls \@IEEEeqnarraystrutsize which uses more scratch registers +\def\IEEEeqnarrayseprow{\relax\@ifnextchar[{\@IEEEeqnarrayseprow}{\@IEEEeqnarrayseprow[0.25\normalbaselineskip]}} +\def\@IEEEeqnarrayseprow[#1]{\relax\@ifnextchar[{\@@IEEEeqnarrayseprow[#1]}{\@@IEEEeqnarrayseprow[#1][\relax]}} +\def\@@IEEEeqnarrayseprow[#1][#2]{\def\@IEEEeqnarrayseprowARGONE{#1}% +\ifx\@IEEEeqnarrayseprowARGONE\@empty% +% get the skip value, based on the font commands +% use skip5 because \IEEEeqnarraystrutsize uses \skip0, \skip2, \skip3 +% assign within a bogus box to confine the font changes +{\setbox0=\hbox{#2\relax\global\skip5=0.25\normalbaselineskip}}% +\else% +{\setbox0=\hbox{#2\relax\global\skip5=#1}}% +\fi% +\@IEEEeqnarrayhoptolastcolumn\IEEEeqnarraystrutsize{\skip5}{0pt}[\relax]\relax} + +% creates a blank separator row, but omits all the column templates +% usage: \IEEEeqnarrayseprowcut[separation length][font size commands] +% default is \IEEEeqnarrayseprowcut[0.25\normalbaselineskip][\relax] +% blank arguments inherit the default values +% uses \skip5 as a scratch register - calls \@IEEEeqnarraystrutsize which uses more scratch registers +\def\IEEEeqnarrayseprowcut{\multispan{\@IEEEeqnnumcols}\relax% span all the cols +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi% +\@ifnextchar[{\@IEEEeqnarrayseprowcut}{\@IEEEeqnarrayseprowcut[0.25\normalbaselineskip]}} +\def\@IEEEeqnarrayseprowcut[#1]{\relax\@ifnextchar[{\@@IEEEeqnarrayseprowcut[#1]}{\@@IEEEeqnarrayseprowcut[#1][\relax]}} +\def\@@IEEEeqnarrayseprowcut[#1][#2]{\def\@IEEEeqnarrayseprowARGONE{#1}% +\ifx\@IEEEeqnarrayseprowARGONE\@empty% +% get the skip value, based on the font commands +% use skip5 because \IEEEeqnarraystrutsize uses \skip0, \skip2, \skip3 +% assign within a bogus box to confine the font changes +{\setbox0=\hbox{#2\relax\global\skip5=0.25\normalbaselineskip}}% +\else% +{\setbox0=\hbox{#2\relax\global\skip5=#1}}% +\fi% +\IEEEeqnarraystrutsize{\skip5}{0pt}[\relax]\relax} + + + +% draws a single rule across all the columns optional +% argument determines the rule width, \arrayrulewidth is the default +% updates column counter as needed and turns off struts +% usage: \IEEEeqnarrayrulerow[rule line thickness] +\def\IEEEeqnarrayrulerow{\multispan{\@IEEEeqnnumcols}\relax% span all the cols +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi% +\@ifnextchar[{\@IEEEeqnarrayrulerow}{\@IEEEeqnarrayrulerow[\arrayrulewidth]}} +\def\@IEEEeqnarrayrulerow[#1]{\leaders\hrule height#1\hfil\relax% put in our rule +% turn off any struts +\IEEEeqnarraystrutsize{0pt}{0pt}[\relax]\relax} + + +% draws a double rule by using a single rule row, a separator row, and then +% another single rule row +% first optional argument determines the rule thicknesses, \arrayrulewidth is the default +% second optional argument determines the rule spacing, \doublerulesep is the default +% usage: \IEEEeqnarraydblrulerow[rule line thickness][rule spacing] +\def\IEEEeqnarraydblrulerow{\multispan{\@IEEEeqnnumcols}\relax% span all the cols +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi% +\@ifnextchar[{\@IEEEeqnarraydblrulerow}{\@IEEEeqnarraydblrulerow[\arrayrulewidth]}} +\def\@IEEEeqnarraydblrulerow[#1]{\relax\@ifnextchar[{\@@IEEEeqnarraydblrulerow[#1]}% +{\@@IEEEeqnarraydblrulerow[#1][\doublerulesep]}} +\def\@@IEEEeqnarraydblrulerow[#1][#2]{\def\@IEEEeqnarraydblrulerowARG{#1}% +% we allow the user to say \IEEEeqnarraydblrulerow[][] +\ifx\@IEEEeqnarraydblrulerowARG\@empty% +\@IEEEeqnarrayrulerow[\arrayrulewidth]% +\else% +\@IEEEeqnarrayrulerow[#1]\relax% +\fi% +\def\@IEEEeqnarraydblrulerowARG{#2}% +\ifx\@IEEEeqnarraydblrulerowARG\@empty% +\\\IEEEeqnarrayseprow[\doublerulesep][\relax]% +\else% +\\\IEEEeqnarrayseprow[#2][\relax]% +\fi% +\\\multispan{\@IEEEeqnnumcols}% +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi% +\def\@IEEEeqnarraydblrulerowARG{#1}% +\ifx\@IEEEeqnarraydblrulerowARG\@empty% +\@IEEEeqnarrayrulerow[\arrayrulewidth]% +\else% +\@IEEEeqnarrayrulerow[#1]% +\fi% +} + +% draws a double rule by using a single rule row, a separator (cutting) row, and then +% another single rule row +% first optional argument determines the rule thicknesses, \arrayrulewidth is the default +% second optional argument determines the rule spacing, \doublerulesep is the default +% usage: \IEEEeqnarraydblrulerow[rule line thickness][rule spacing] +\def\IEEEeqnarraydblrulerowcut{\multispan{\@IEEEeqnnumcols}\relax% span all the cols +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi% +\@ifnextchar[{\@IEEEeqnarraydblrulerowcut}{\@IEEEeqnarraydblrulerowcut[\arrayrulewidth]}} +\def\@IEEEeqnarraydblrulerowcut[#1]{\relax\@ifnextchar[{\@@IEEEeqnarraydblrulerowcut[#1]}% +{\@@IEEEeqnarraydblrulerowcut[#1][\doublerulesep]}} +\def\@@IEEEeqnarraydblrulerowcut[#1][#2]{\def\@IEEEeqnarraydblrulerowARG{#1}% +% we allow the user to say \IEEEeqnarraydblrulerow[][] +\ifx\@IEEEeqnarraydblrulerowARG\@empty% +\@IEEEeqnarrayrulerow[\arrayrulewidth]% +\else% +\@IEEEeqnarrayrulerow[#1]% +\fi% +\def\@IEEEeqnarraydblrulerowARG{#2}% +\ifx\@IEEEeqnarraydblrulerowARG\@empty% +\\\IEEEeqnarrayseprowcut[\doublerulesep][\relax]% +\else% +\\\IEEEeqnarrayseprowcut[#2][\relax]% +\fi% +\\\multispan{\@IEEEeqnnumcols}% +% advance column counter only if the IEEEeqnarray environment wants it +\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi% +\def\@IEEEeqnarraydblrulerowARG{#1}% +\ifx\@IEEEeqnarraydblrulerowARG\@empty% +\@IEEEeqnarrayrulerow[\arrayrulewidth]% +\else% +\@IEEEeqnarrayrulerow[#1]% +\fi% +} + + + +% inserts a full row's worth of &'s +% relies on \@IEEEeqnnumcols to provide the correct number of columns +% uses \@IEEEtrantmptoksA, \count0 as scratch registers +\def\@IEEEeqnarrayhoptolastcolumn{\@IEEEtrantmptoksA={}\count0=1\relax% +\loop% add cols if the user did not use them all +\ifnum\count0<\@IEEEeqnnumcols\relax% +\@IEEEappendtoksA{&}% +\advance\count0 by 1\relax% update the col count +\repeat% +\the\@IEEEtrantmptoksA%execute the &'s +} + + + +\newif\if@IEEEeqnarrayISinner % flag to indicate if we are within the lines +\@IEEEeqnarrayISinnerfalse % of an IEEEeqnarray - after the IEEEeqnarraydecl + +\edef\@IEEEeqnarrayTHEstrutheight{0pt} % height and depth of IEEEeqnarray struts +\edef\@IEEEeqnarrayTHEstrutdepth{0pt} + +\edef\@IEEEeqnarrayTHEmasterstrutheight{0pt} % default height and depth of +\edef\@IEEEeqnarrayTHEmasterstrutdepth{0pt} % struts within an IEEEeqnarray + +\edef\@IEEEeqnarrayTHEmasterstrutHSAVE{0pt} % saved master strut height +\edef\@IEEEeqnarrayTHEmasterstrutDSAVE{0pt} % and depth + +\newif\if@IEEEeqnarrayusemasterstrut % flag to indicate that the master strut value +\@IEEEeqnarrayusemasterstruttrue % is to be used + + + +% saves the strut height and depth of the master strut +\def\@IEEEeqnarraymasterstrutsave{\relax% +\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax% +% remove stretchability +\dimen0\skip0\relax% +\dimen2\skip2\relax% +% save values +\edef\@IEEEeqnarrayTHEmasterstrutHSAVE{\the\dimen0}% +\edef\@IEEEeqnarrayTHEmasterstrutDSAVE{\the\dimen2}} + +% restores the strut height and depth of the master strut +\def\@IEEEeqnarraymasterstrutrestore{\relax% +\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutHSAVE\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutDSAVE\relax% +% remove stretchability +\dimen0\skip0\relax% +\dimen2\skip2\relax% +% restore values +\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}} + + +% globally restores the strut height and depth to the +% master values and sets the master strut flag to true +\def\@IEEEeqnarraystrutreset{\relax% +\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax% +% remove stretchability +\dimen0\skip0\relax% +\dimen2\skip2\relax% +% restore values +\xdef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}% +\xdef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}% +\global\@IEEEeqnarrayusemasterstruttrue} + + +% if the master strut is not to be used, make the current +% values of \@IEEEeqnarrayTHEstrutheight, \@IEEEeqnarrayTHEstrutdepth +% and the use master strut flag, global +% this allows user strut commands issued in the last column to be carried +% into the isolation/strut column +\def\@IEEEeqnarrayglobalizestrutstatus{\relax% +\if@IEEEeqnarrayusemasterstrut\else% +\xdef\@IEEEeqnarrayTHEstrutheight{\@IEEEeqnarrayTHEstrutheight}% +\xdef\@IEEEeqnarrayTHEstrutdepth{\@IEEEeqnarrayTHEstrutdepth}% +\global\@IEEEeqnarrayusemasterstrutfalse% +\fi} + + + +% usage: \IEEEeqnarraystrutsize{height}{depth}[font size commands] +% If called outside the lines of an IEEEeqnarray, sets the height +% and depth of both the master and local struts. If called inside +% an IEEEeqnarray line, sets the height and depth of the local strut +% only and sets the flag to indicate the use of the local strut +% values. If the height or depth is left blank, 0.7\normalbaselineskip +% and 0.3\normalbaselineskip will be used, respectively. +% The optional argument can be used to evaluate the lengths under +% a different font size and styles. If none is specified, the current +% font is used. +% uses scratch registers \skip0, \skip2, \skip3, \dimen0, \dimen2 +\def\IEEEeqnarraystrutsize#1#2{\relax\@ifnextchar[{\@IEEEeqnarraystrutsize{#1}{#2}}{\@IEEEeqnarraystrutsize{#1}{#2}[\relax]}} +\def\@IEEEeqnarraystrutsize#1#2[#3]{\def\@IEEEeqnarraystrutsizeARG{#1}% +\ifx\@IEEEeqnarraystrutsizeARG\@empty% +{\setbox0=\hbox{#3\relax\global\skip3=0.7\normalbaselineskip}}% +\skip0=\skip3\relax% +\else% arg one present +{\setbox0=\hbox{#3\relax\global\skip3=#1\relax}}% +\skip0=\skip3\relax% +\fi% if null arg +\def\@IEEEeqnarraystrutsizeARG{#2}% +\ifx\@IEEEeqnarraystrutsizeARG\@empty% +{\setbox0=\hbox{#3\relax\global\skip3=0.3\normalbaselineskip}}% +\skip2=\skip3\relax% +\else% arg two present +{\setbox0=\hbox{#3\relax\global\skip3=#2\relax}}% +\skip2=\skip3\relax% +\fi% if null arg +% remove stretchability, just to be safe +\dimen0\skip0\relax% +\dimen2\skip2\relax% +% dimen0 = height, dimen2 = depth +\if@IEEEeqnarrayISinner% inner does not touch master strut size +\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}% +\@IEEEeqnarrayusemasterstrutfalse% do not use master +\else% outer, have to set master strut too +\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}% +\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}% +\@IEEEeqnarrayusemasterstruttrue% use master strut +\fi} + + +% usage: \IEEEeqnarraystrutsizeadd{added height}{added depth}[font size commands] +% If called outside the lines of an IEEEeqnarray, adds the given height +% and depth to both the master and local struts. +% If called inside an IEEEeqnarray line, adds the given height and depth +% to the local strut only and sets the flag to indicate the use +% of the local strut values. +% In both cases, if a height or depth is left blank, 0pt is used instead. +% The optional argument can be used to evaluate the lengths under +% a different font size and styles. If none is specified, the current +% font is used. +% uses scratch registers \skip0, \skip2, \skip3, \dimen0, \dimen2 +\def\IEEEeqnarraystrutsizeadd#1#2{\relax\@ifnextchar[{\@IEEEeqnarraystrutsizeadd{#1}{#2}}{\@IEEEeqnarraystrutsizeadd{#1}{#2}[\relax]}} +\def\@IEEEeqnarraystrutsizeadd#1#2[#3]{\def\@IEEEeqnarraystrutsizearg{#1}% +\ifx\@IEEEeqnarraystrutsizearg\@empty% +\skip0=0pt\relax% +\else% arg one present +{\setbox0=\hbox{#3\relax\global\skip3=#1}}% +\skip0=\skip3\relax% +\fi% if null arg +\def\@IEEEeqnarraystrutsizearg{#2}% +\ifx\@IEEEeqnarraystrutsizearg\@empty% +\skip2=0pt\relax% +\else% arg two present +{\setbox0=\hbox{#3\relax\global\skip3=#2}}% +\skip2=\skip3\relax% +\fi% if null arg +% remove stretchability, just to be safe +\dimen0\skip0\relax% +\dimen2\skip2\relax% +% dimen0 = height, dimen2 = depth +\if@IEEEeqnarrayISinner% inner does not touch master strut size +% get local strut size +\expandafter\skip0=\@IEEEeqnarrayTHEstrutheight\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEstrutdepth\relax% +% add it to the user supplied values +\advance\dimen0 by \skip0\relax% +\advance\dimen2 by \skip2\relax% +% update the local strut size +\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}% +\@IEEEeqnarrayusemasterstrutfalse% do not use master +\else% outer, have to set master strut too +% get master strut size +\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax% +% add it to the user supplied values +\advance\dimen0 by \skip0\relax% +\advance\dimen2 by \skip2\relax% +% update the local and master strut sizes +\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}% +\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}% +\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}% +\@IEEEeqnarrayusemasterstruttrue% use master strut +\fi} + + +% allow user a way to see the struts +\newif\ifIEEEvisiblestruts +\IEEEvisiblestrutsfalse + +% inserts an invisible strut using the master or local strut values +% uses scratch registers \skip0, \skip2, \dimen0, \dimen2 +\def\@IEEEeqnarrayinsertstrut{\relax% +\if@IEEEeqnarrayusemasterstrut +% get master strut size +\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax% +\else% +% get local strut size +\expandafter\skip0=\@IEEEeqnarrayTHEstrutheight\relax% +\expandafter\skip2=\@IEEEeqnarrayTHEstrutdepth\relax% +\fi% +% remove stretchability, probably not needed +\dimen0\skip0\relax% +\dimen2\skip2\relax% +% dimen0 = height, dimen2 = depth +% allow user to see struts if desired +\ifIEEEvisiblestruts% +\vrule width0.2pt height\dimen0 depth\dimen2\relax% +\else% +\vrule width0pt height\dimen0 depth\dimen2\relax\fi} + + +% creates an invisible strut, useable even outside \IEEEeqnarray +% if \IEEEvisiblestrutstrue, the strut will be visible and 0.2pt wide. +% usage: \IEEEstrut[height][depth][font size commands] +% default is \IEEEstrut[0.7\normalbaselineskip][0.3\normalbaselineskip][\relax] +% blank arguments inherit the default values +% uses \dimen0, \dimen2, \skip0, \skip2 +\def\IEEEstrut{\relax\@ifnextchar[{\@IEEEstrut}{\@IEEEstrut[0.7\normalbaselineskip]}} +\def\@IEEEstrut[#1]{\relax\@ifnextchar[{\@@IEEEstrut[#1]}{\@@IEEEstrut[#1][0.3\normalbaselineskip]}} +\def\@@IEEEstrut[#1][#2]{\relax\@ifnextchar[{\@@@IEEEstrut[#1][#2]}{\@@@IEEEstrut[#1][#2][\relax]}} +\def\@@@IEEEstrut[#1][#2][#3]{\mbox{#3\relax% +\def\@IEEEstrutARG{#1}% +\ifx\@IEEEstrutARG\@empty% +\skip0=0.7\normalbaselineskip\relax% +\else% +\skip0=#1\relax% +\fi% +\def\@IEEEstrutARG{#2}% +\ifx\@IEEEstrutARG\@empty% +\skip2=0.3\normalbaselineskip\relax% +\else% +\skip2=#2\relax% +\fi% +% remove stretchability, probably not needed +\dimen0\skip0\relax% +\dimen2\skip2\relax% +\ifIEEEvisiblestruts% +\vrule width0.2pt height\dimen0 depth\dimen2\relax% +\else% +\vrule width0.0pt height\dimen0 depth\dimen2\relax\fi}} + + +% enables strut mode by setting a default strut size and then zeroing the +% \baselineskip, \lineskip, \lineskiplimit and \jot +\def\IEEEeqnarraystrutmode{\IEEEeqnarraystrutsize{0.7\normalbaselineskip}{0.3\normalbaselineskip}[\relax]% +\baselineskip=0pt\lineskip=0pt\lineskiplimit=0pt\jot=0pt} + + +% equation and subequation forms to use to setup hyperref's \@currentHref +\def\@IEEEtheHrefequation{equation.\theHequation} +\def\@IEEEtheHrefsubequation{equation.\theHequation\alph{IEEEsubequation}} + + +\def\IEEEeqnarray{\@IEEEeqnumpersisttrue\@IEEEsubeqnumpersistfalse\@IEEEeqnarray} +\def\endIEEEeqnarray{\end@IEEEeqnarray} + +\@namedef{IEEEeqnarray*}{\@IEEEeqnumpersistfalse\@IEEEsubeqnumpersistfalse\@IEEEeqnarray} +\@namedef{endIEEEeqnarray*}{\end@IEEEeqnarray} + + +% \IEEEeqnarray is an enhanced \eqnarray. +% The star form defaults to not putting equation numbers at the end of each row. +% usage: \IEEEeqnarray[decl]{cols} +\def\@IEEEeqnarray{\relax\@ifnextchar[{\@@IEEEeqnarray}{\@@IEEEeqnarray[\relax]}} +% We have to be careful here to normalize catcodes just before acquiring the +% cols as that specification may contain punctuation which could be subject +% to document catcode changes. +\def\@@IEEEeqnarray[#1]{\begingroup\IEEEnormalcatcodes\@@@IEEEeqnarray[#1]} +\def\@@@IEEEeqnarray[#1]#2{\endgroup + % default to showing the equation number or not based on whether or not + % the star form was involked + \if@IEEEeqnumpersist\global\@eqnswtrue + \else% not the star form + \global\@eqnswfalse + \fi% if star form + % provide a basic hyperref \theHequation if this has not already been setup (hyperref not loaded, or no section counter) + \@ifundefined{theHequation}{\def\theHequation{\arabic{equation}}}{}\relax + % provide dummy hyperref commands in case hyperref is not loaded + \providecommand{\Hy@raisedlink}[1]{}\relax + \providecommand{\hyper@anchorstart}[1]{}\relax + \providecommand{\hyper@anchorend}{}\relax + \providecommand{\@currentHref}{}\relax + \@IEEEeqnumpreadvfalse% reset eqnpreadv flag + \@IEEEsubeqnumpreadvfalse% reset subeqnpreadv flag + \@IEEEeqnarrayISinnerfalse% not yet within the lines of the halign + \@IEEEeqnarraystrutsize{0pt}{0pt}[\relax]% turn off struts by default + \@IEEEeqnarrayusemasterstruttrue% use master strut till user asks otherwise + \IEEEvisiblestrutsfalse% diagnostic mode defaults to off + % no extra space unless the user specifically requests it + \lineskip=0pt\relax + \lineskiplimit=0pt\relax + \baselineskip=\normalbaselineskip\relax% + \jot=\IEEEnormaljot\relax% + \mathsurround\z@\relax% no extra spacing around math + \@advanceIEEEeqncolcnttrue% advance the col counter for each col the user uses, + % used in \IEEEeqnarraymulticol and in the preamble build + %V1.8 Here we preadvance to the next equation number. + % If the user later wants a continued subequation, we can roll back. + \global\@IEEEsubeqnnumrollback=\c@IEEEsubequation% + \stepcounter{equation}\@IEEEeqnumpreadvtrue% advance equation counter before first line + \setcounter{IEEEsubequation}{0}% no subequation yet + \let\@IEEEcurrentlabelsave\@currentlabel% save current label as we later change it globally + \let\@IEEEcurrentHrefsave\@currentHref% save current href label as we later change it globally + \def\@currentlabel{\p@equation\theequation}% redefine the ref label + \def\@currentHref{\@IEEEtheHrefequation}% setup hyperref label + \IEEEeqnarraydecl\relax% allow a way for the user to make global overrides + #1\relax% allow user to override defaults + \let\\\@IEEEeqnarraycr% replace newline with one that can put in eqn. numbers + \global\@IEEEeqncolcnt\z@% col. count = 0 for first line + \@IEEEbuildpreamble{#2}\relax% build the preamble and put it into \@IEEEtrantmptoksA + % put in the column for the equation number + \ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi% col separator for those after the first + \toks0={##}% + % advance the \@IEEEeqncolcnt for the isolation col, this helps with error checking + \@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}% + % add the isolation column + \@IEEEappendtoksA{\tabskip\z@skip\bgroup\the\toks0\egroup}% + % advance the \@IEEEeqncolcnt for the equation number col, this helps with error checking + \@IEEEappendtoksA{&\global\advance\@IEEEeqncolcnt by 1\relax}% + % add the equation number col to the preamble + \@IEEEappendtoksA{\tabskip\z@skip\hb@xt@\z@\bgroup\hss\the\toks0\egroup}% + % note \@IEEEeqnnumcols does not count the equation col or isolation col + % set the starting tabskip glue as determined by the preamble build + \tabskip=\@IEEEBPstartglue\relax + % begin the display alignment + \@IEEEeqnarrayISinnertrue% commands are now within the lines + $$\everycr{}\halign to\displaywidth\bgroup + % "exspand" the preamble + \span\the\@IEEEtrantmptoksA\cr} + +% enter isolation/strut column (or the next column if the user did not use +% every column), record the strut status, complete the columns, do the strut if needed, +% restore counters (to backout any equation setup for a next line that was never used) +% to their correct values and exit +\def\end@IEEEeqnarray{\@IEEEeqnarrayglobalizestrutstatus&\@@IEEEeqnarraycr\egroup +\if@IEEEsubeqnumpreadv\global\advance\c@IEEEsubequation\m@ne\fi +\if@IEEEeqnumpreadv\global\advance\c@equation\m@ne\global\c@IEEEsubequation=\@IEEEsubeqnnumrollback\fi +\global\let\@currentlabel\@IEEEcurrentlabelsave% restore current label +\global\let\@currentHref\@IEEEcurrentHrefsave% restore current href label +$$\@ignoretrue} + + +% IEEEeqnarray uses a modifed \\ instead of the plain \cr to +% end rows. This allows for things like \\*[vskip amount] +% These "cr" macros are modified versions of those for LaTeX2e's eqnarray +% the {\ifnum0=`} braces must be kept away from the last column to avoid +% altering spacing of its math, so we use & to advance to the next column +% as there is an isolation/strut column after the user's columns +\def\@IEEEeqnarraycr{\@IEEEeqnarrayglobalizestrutstatus&% save strut status and advance to next column + {\ifnum0=`}\fi + \@ifstar{% + \global\@eqpen\@M\@IEEEeqnarrayYCR + }{% + \global\@eqpen\interdisplaylinepenalty \@IEEEeqnarrayYCR + }% +} + +\def\@IEEEeqnarrayYCR{\@testopt\@IEEEeqnarrayXCR\z@skip} + +\def\@IEEEeqnarrayXCR[#1]{% + \ifnum0=`{\fi}% + \@@IEEEeqnarraycr + \noalign{\penalty\@eqpen\vskip\jot\vskip #1\relax}}% + +\def\@@IEEEeqnarraycr{\@IEEEtrantmptoksA={}% clear token register + \advance\@IEEEeqncolcnt by -1\relax% adjust col count because of the isolation column + \ifnum\@IEEEeqncolcnt>\@IEEEeqnnumcols\relax + \@IEEEclspkgerror{Too many columns within the IEEEeqnarray\MessageBreak + environment}% + {Use fewer \string &'s or put more columns in the IEEEeqnarray column\MessageBreak + specifications.}\relax% + \else + \loop% add cols if the user did not use them all + \ifnum\@IEEEeqncolcnt<\@IEEEeqnnumcols\relax + \@IEEEappendtoksA{&}% + \advance\@IEEEeqncolcnt by 1\relax% update the col count + \repeat + % this number of &'s will take us the the isolation column + \fi + % execute the &'s + \the\@IEEEtrantmptoksA% + % handle the strut/isolation column + \@IEEEeqnarrayinsertstrut% do the strut if needed + \@IEEEeqnarraystrutreset% reset the strut system for next line or IEEEeqnarray + &% and enter the equation number column + \if@eqnsw% only if we display something + \Hy@raisedlink{\hyper@anchorstart{\@currentHref}}% start a hyperref anchor + \global\@IEEEeqnumpreadvfalse\relax% displaying an equation number means + \global\@IEEEsubeqnumpreadvfalse\relax% the equation counters point to valid equations + % V1.8 Here we setup the counters, currentlabel and status for what would be the *next* + % equation line as would be the case under the current settings. However, there are two problems. + % One problem is that there might not ever be a next line. The second problem is that the user + % may later alter the meaning of a line with commands such as \IEEEyessubnumber. So, to handle + % these cases we have to record the current values of the (sub)equation counters and revert back + % to them if the next line is changed or never comes. The \if@IEEEeqnumpreadv, \if@IEEEsubeqnumpreadv + % and \@IEEEsubeqnnumrollback stuff tracks this. + % The logic to handle all this is surprisingly complex, but a nice feature of the approach here is + % that the equation counters and labels remain valid for what the line would be unless a + % \IEEEyessubnumber et al. later changes it. So, any hyperref links are always correct. + \ifnum\c@IEEEsubequation>0\relax% handle subequation + \theIEEEsubequationdis\relax + \if@IEEEsubeqnumpersist% setup for default type of next line + \stepcounter{IEEEsubequation}\global\@IEEEsubeqnumpreadvtrue\relax + \gdef\@currentlabel{\p@IEEEsubequation\theIEEEsubequation}\relax + \gdef\@currentHref{\@IEEEtheHrefsubequation}% setup hyperref label + \else + % if no subeqnum persist, go ahead and setup for a new equation number + \global\@IEEEsubeqnnumrollback=\c@IEEEsubequation + \stepcounter{equation}\global\@IEEEeqnumpreadvtrue\relax + \setcounter{IEEEsubequation}{0}\gdef\@currentlabel{\p@equation\theequation}\relax + \gdef\@currentHref{\@IEEEtheHrefequation}% setup hyperref label + \fi + \else% display a standard equation number + \theequationdis\relax + \setcounter{IEEEsubequation}{0}\relax% not really needed + \if@IEEEsubeqnumpersist% setup for default type of next line + % subequations that follow plain equations carry the same equation number e.g, 5, 5a rather than 5, 6a + \stepcounter{IEEEsubequation}\global\@IEEEsubeqnumpreadvtrue\relax + \gdef\@currentlabel{\p@IEEEsubequation\theIEEEsubequation}\relax + \gdef\@currentHref{\@IEEEtheHrefsubequation}% setup hyperref label + \else + % if no subeqnum persist, go ahead and setup for a new equation number + \global\@IEEEsubeqnnumrollback=\c@IEEEsubequation + \stepcounter{equation}\global\@IEEEeqnumpreadvtrue\relax + \setcounter{IEEEsubequation}{0}\gdef\@currentlabel{\p@equation\theequation}\relax + \gdef\@currentHref{\@IEEEtheHrefequation}% setup hyperref label + \fi + \fi% + \Hy@raisedlink{\hyper@anchorend}% end hyperref anchor + \fi% fi only if we display something + % reset the flags to indicate the default preferences of the display of equation numbers + \if@IEEEeqnumpersist\global\@eqnswtrue\else\global\@eqnswfalse\fi + \if@IEEEsubeqnumpersist\global\@eqnswtrue\fi% ditto for the subequation flag + % reset the number of columns the user actually used + \global\@IEEEeqncolcnt\z@\relax + % the real end of the line + \cr} + + + + + +% \IEEEeqnarraybox is like \IEEEeqnarray except the box form puts everything +% inside a vtop, vbox, or vcenter box depending on the letter in the second +% optional argument (t,b,c). Vbox is the default. Unlike \IEEEeqnarray, +% equation numbers are not displayed and \IEEEeqnarraybox can be nested. +% \IEEEeqnarrayboxm is for math mode (like \array) and does not put the vbox +% within an hbox. +% \IEEEeqnarrayboxt is for text mode (like \tabular) and puts the vbox within +% a \hbox{$ $} construct. +% \IEEEeqnarraybox will auto detect whether to use \IEEEeqnarrayboxm or +% \IEEEeqnarrayboxt depending on the math mode. +% The third optional argument specifies the width this box is to be set to - +% natural width is the default. +% The * forms do not add \jot line spacing +% usage: \IEEEeqnarraybox[decl][pos][width]{cols} +\def\IEEEeqnarrayboxm{\@IEEEeqnarrayboxnojotfalse\@IEEEeqnarrayboxHBOXSWfalse\@IEEEeqnarraybox} +\def\endIEEEeqnarrayboxm{\end@IEEEeqnarraybox} +\@namedef{IEEEeqnarrayboxm*}{\@IEEEeqnarrayboxnojottrue\@IEEEeqnarrayboxHBOXSWfalse\@IEEEeqnarraybox} +\@namedef{endIEEEeqnarrayboxm*}{\end@IEEEeqnarraybox} + +\def\IEEEeqnarrayboxt{\@IEEEeqnarrayboxnojotfalse\@IEEEeqnarrayboxHBOXSWtrue\@IEEEeqnarraybox} +\def\endIEEEeqnarrayboxt{\end@IEEEeqnarraybox} +\@namedef{IEEEeqnarrayboxt*}{\@IEEEeqnarrayboxnojottrue\@IEEEeqnarrayboxHBOXSWtrue\@IEEEeqnarraybox} +\@namedef{endIEEEeqnarrayboxt*}{\end@IEEEeqnarraybox} + +\def\IEEEeqnarraybox{\@IEEEeqnarrayboxnojotfalse\ifmmode\@IEEEeqnarrayboxHBOXSWfalse\else\@IEEEeqnarrayboxHBOXSWtrue\fi% +\@IEEEeqnarraybox} +\def\endIEEEeqnarraybox{\end@IEEEeqnarraybox} + +\@namedef{IEEEeqnarraybox*}{\@IEEEeqnarrayboxnojottrue\ifmmode\@IEEEeqnarrayboxHBOXSWfalse\else\@IEEEeqnarrayboxHBOXSWtrue\fi% +\@IEEEeqnarraybox} +\@namedef{endIEEEeqnarraybox*}{\end@IEEEeqnarraybox} + +% flag to indicate if the \IEEEeqnarraybox needs to put things into an hbox{$ $} +% for \vcenter in non-math mode +\newif\if@IEEEeqnarrayboxHBOXSW% +\@IEEEeqnarrayboxHBOXSWfalse + +\def\@IEEEeqnarraybox{\relax\@ifnextchar[{\@@IEEEeqnarraybox}{\@@IEEEeqnarraybox[\relax]}} +% We have to be careful here to normalize catcodes just before acquiring the +% cols as that specification may contain punctuation which could be subject +% to document catcode changes. +\def\@@IEEEeqnarraybox[#1]{\relax\begingroup\IEEEnormalcatcodes\@ifnextchar[{\@@@IEEEeqnarraybox[#1]}{\@@@IEEEeqnarraybox[#1][b]}} +\def\@@@IEEEeqnarraybox[#1][#2]{\relax\@ifnextchar[{\@@@@IEEEeqnarraybox[#1][#2]}{\@@@@IEEEeqnarraybox[#1][#2][\relax]}} + +% #1 = decl; #2 = t,b,c; #3 = width, #4 = col specs +\def\@@@@IEEEeqnarraybox[#1][#2][#3]#4{\endgroup\@IEEEeqnarrayISinnerfalse % not yet within the lines of the halign + \@IEEEeqnarraymasterstrutsave% save current master strut values + \@IEEEeqnarraystrutsize{0pt}{0pt}[\relax]% turn off struts by default + \@IEEEeqnarrayusemasterstruttrue% use master strut till user asks otherwise + \IEEEvisiblestrutsfalse% diagnostic mode defaults to off + % no extra space unless the user specifically requests it + \lineskip=0pt\relax% + \lineskiplimit=0pt\relax% + \baselineskip=\normalbaselineskip\relax% + \jot=\IEEEnormaljot\relax% + \mathsurround\z@\relax% no extra spacing around math + % the default end glues are zero for an \IEEEeqnarraybox + \edef\@IEEEeqnarraycolSEPdefaultstart{\@IEEEeqnarraycolSEPzero}% default start glue + \edef\@IEEEeqnarraycolSEPdefaultend{\@IEEEeqnarraycolSEPzero}% default end glue + \edef\@IEEEeqnarraycolSEPdefaultmid{\@IEEEeqnarraycolSEPzero}% default inter-column glue + \@advanceIEEEeqncolcntfalse% do not advance the col counter for each col the user uses, + % used in \IEEEeqnarraymulticol and in the preamble build + \IEEEeqnarrayboxdecl\relax% allow a way for the user to make global overrides + #1\relax% allow user to override defaults + \let\\\@IEEEeqnarrayboxcr% replace newline with one that allows optional spacing + \@IEEEbuildpreamble{#4}\relax% build the preamble and put it into \@IEEEtrantmptoksA + % add an isolation column to the preamble to stop \\'s {} from getting into the last col + \ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi% col separator for those after the first + \toks0={##}% + % add the isolation column to the preamble + \@IEEEappendtoksA{\tabskip\z@skip\bgroup\the\toks0\egroup}% + % set the starting tabskip glue as determined by the preamble build + \tabskip=\@IEEEBPstartglue\relax + % begin the alignment + \everycr{}% + % use only the very first token to determine the positioning + \@IEEEextracttoken{#2}\relax + \ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: IEEEeqnarraybox position specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax + \fi + % \@IEEEextractedtoken has the first token, the rest are ignored + % if we need to put things into and hbox and go into math mode, do so now + \if@IEEEeqnarrayboxHBOXSW \leavevmode \hbox \bgroup $\fi% + % use the appropriate vbox type + \if\@IEEEextractedtoken t\relax\vtop\else\if\@IEEEextractedtoken c\relax% + \vcenter\else\vbox\fi\fi\bgroup% + \@IEEEeqnarrayISinnertrue% commands are now within the lines + \ifx#3\relax\halign\else\halign to #3\relax\fi% + \bgroup + % "exspand" the preamble + \span\the\@IEEEtrantmptoksA\cr} + +% carry strut status and enter the isolation/strut column, +% exit from math mode if needed, and exit +\def\end@IEEEeqnarraybox{\@IEEEeqnarrayglobalizestrutstatus% carry strut status +&% enter isolation/strut column +\@IEEEeqnarrayinsertstrut% do strut if needed +\@IEEEeqnarraymasterstrutrestore% restore the previous master strut values +% reset the strut system for next IEEEeqnarray +% (sets local strut values back to previous master strut values) +\@IEEEeqnarraystrutreset% +% ensure last line, exit from halign, close vbox +\crcr\egroup\egroup% +% exit from math mode and close hbox if needed +\if@IEEEeqnarrayboxHBOXSW $\egroup\fi} + + + +% IEEEeqnarraybox uses a modifed \\ instead of the plain \cr to +% end rows. This allows for things like \\[vskip amount] +% This "cr" macros are modified versions those for LaTeX2e's eqnarray +% For IEEEeqnarraybox, \\* is the same as \\ +% the {\ifnum0=`} braces must be kept away from the last column to avoid +% altering spacing of its math, so we use & to advance to the isolation/strut column +% carry strut status into isolation/strut column +\def\@IEEEeqnarrayboxcr{\@IEEEeqnarrayglobalizestrutstatus% carry strut status +&% enter isolation/strut column +\@IEEEeqnarrayinsertstrut% do strut if needed +% reset the strut system for next line or IEEEeqnarray +\@IEEEeqnarraystrutreset% +{\ifnum0=`}\fi% +\@ifstar{\@IEEEeqnarrayboxYCR}{\@IEEEeqnarrayboxYCR}} + +% test and setup the optional argument to \\[] +\def\@IEEEeqnarrayboxYCR{\@testopt\@IEEEeqnarrayboxXCR\z@skip} + +% IEEEeqnarraybox does not automatically increase line spacing by \jot +\def\@IEEEeqnarrayboxXCR[#1]{\ifnum0=`{\fi}% +\cr\noalign{\if@IEEEeqnarrayboxnojot\else\vskip\jot\fi\vskip#1\relax}} + + + +% usage: \@IEEEbuildpreamble{column specifiers} +% starts the halign preamble build +% the assembled preamble is put in \@IEEEtrantmptoksA +\def\@IEEEbuildpreamble#1{\@IEEEtrantmptoksA={}% clear token register +\let\@IEEEBPcurtype=u%current column type is not yet known +\let\@IEEEBPprevtype=s%the previous column type was the start +\let\@IEEEBPnexttype=u%next column type is not yet known +% ensure these are valid +\def\@IEEEBPcurglue={0pt plus 0pt minus 0pt}% +\def\@IEEEBPcurcolname{@IEEEdefault}% name of current column definition +% currently acquired numerically referenced glue +% use a name that is easier to remember +\let\@IEEEBPcurnum=\@IEEEtrantmpcountA% +\@IEEEBPcurnum=0% +% tracks number of columns in the preamble +\@IEEEeqnnumcols=0% +% record the default end glues +\edef\@IEEEBPstartglue{\@IEEEeqnarraycolSEPdefaultstart}% +\edef\@IEEEBPendglue{\@IEEEeqnarraycolSEPdefaultend}% +\edef\@IEEEedefMACRO{#1}\relax% fully expand the preamble to support macro containers +% now parse the user's column specifications +% \ignorespaces is used as a delimiter, need at least one trailing \relax because +% \@@IEEEbuildpreamble looks into the future +\expandafter\@@IEEEbuildpreamble\@IEEEedefMACRO\ignorespaces\relax\relax} + + +% usage: \@@IEEEbuildpreamble{current column}{next column} +% parses and builds the halign preamble +\def\@@IEEEbuildpreamble#1#2{\let\@@nextIEEEbuildpreamble=\@@IEEEbuildpreamble% +% use only the very first token to check the end +\@IEEEextracttokengroups{#1}\relax +\ifx\@IEEEextractedfirsttoken\ignorespaces\let\@@nextIEEEbuildpreamble=\@@IEEEfinishpreamble\else% +% identify current and next token type +\@IEEEgetcoltype{#1}{\@IEEEBPcurtype}{1}% current, error on invalid +\@IEEEgetcoltype{#2}{\@IEEEBPnexttype}{0}% next, no error on invalid next +% if curtype is a glue, get the glue def +\if\@IEEEBPcurtype g\@IEEEgetcurglue{#1}{\@IEEEBPcurglue}\fi% +% if curtype is a column, get the column def and set the current column name +\if\@IEEEBPcurtype c\@IEEEgetcurcol{#1}\fi% +% if curtype is a numeral, acquire the user defined glue +\if\@IEEEBPcurtype n\@IEEEprocessNcol{#1}\fi% +% process the acquired glue +\if\@IEEEBPcurtype g\@IEEEprocessGcol\fi% +% process the acquired col +\if\@IEEEBPcurtype c\@IEEEprocessCcol\fi% +% ready prevtype for next col spec. +\let\@IEEEBPprevtype=\@IEEEBPcurtype% +% be sure and put back the future token(s) as a group +\fi\@@nextIEEEbuildpreamble{#2}} + + +% usage: \@@IEEEfinishpreamble{discarded} +% executed just after preamble build is completed +% warn about zero cols, and if prevtype type = u, put in end tabskip glue +% argument is not used +\def\@@IEEEfinishpreamble#1{\ifnum\@IEEEeqnnumcols<1\relax +\@IEEEclspkgerror{No column specifiers declared for IEEEeqnarray}% +{At least one column type must be declared for each IEEEeqnarray.}% +\fi%num cols less than 1 +%if last type undefined, set default end tabskip glue +\if\@IEEEBPprevtype u\@IEEEappendtoksA{\tabskip=\@IEEEBPendglue}\fi} + + +% usage: \@IEEEgetcoltype{col specifier}{\output}{error more} +% Identify and return the column specifier's type code in the given +% \output macro: +% n = number +% g = glue (any other char in catagory 12) +% c = letter +% e = \ignorespaces (end of sequence) +% u = undefined +% error mode: 0 = no error message, 1 = error on invalid char +\def\@IEEEgetcoltype#1#2#3{% +% use only the very first token to determine the type +\@IEEEextracttoken{#1}\relax +% \@IEEEextractedtoken has the first token, the rest are discarded +\let#2=u\relax% assume invalid until know otherwise +\ifx\@IEEEextractedtoken\ignorespaces\let#2=e\else +\ifcat\@IEEEextractedtoken\relax\else% screen out control sequences +\if0\@IEEEextractedtoken\let#2=n\else +\if1\@IEEEextractedtoken\let#2=n\else +\if2\@IEEEextractedtoken\let#2=n\else +\if3\@IEEEextractedtoken\let#2=n\else +\if4\@IEEEextractedtoken\let#2=n\else +\if5\@IEEEextractedtoken\let#2=n\else +\if6\@IEEEextractedtoken\let#2=n\else +\if7\@IEEEextractedtoken\let#2=n\else +\if8\@IEEEextractedtoken\let#2=n\else +\if9\@IEEEextractedtoken\let#2=n\else +\ifcat,\@IEEEextractedtoken\let#2=g\relax +\else\ifcat a\@IEEEextractedtoken\let#2=c\relax\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi +\if#2u\relax +\if0\noexpand#3\relax\else\@IEEEclspkgerror{Invalid character in column specifications}% +{Only letters, numerals and certain other symbols are allowed \MessageBreak +as IEEEeqnarray column specifiers.}\fi\fi} + + +% usage: \@IEEEgetcurcol{col specifier} +% verify the letter referenced column exists +% and return its name in \@IEEEBPcurcolname +% if column specifier is invalid, use the default column @IEEEdefault +\def\@IEEEgetcurcol#1{\expandafter\ifx\csname @IEEEeqnarraycolDEF#1\endcsname\@IEEEeqnarraycolisdefined% +\def\@IEEEBPcurcolname{#1}\else% invalid column name +\@IEEEclspkgerror{Invalid column type "#1" in column specifications.\MessageBreak +Using a default centering column instead}% +{You must define IEEEeqnarray column types before use.}% +\def\@IEEEBPcurcolname{@IEEEdefault}\fi} + + +% usage: \@IEEEgetcurglue{glue specifier}{\output} +% identify the predefined (punctuation) glue value +% and return it in the given output macro +\def\@IEEEgetcurglue#1#2{% +% ! = \! (neg small) -0.16667em (-3/18 em) +% , = \, (small) 0.16667em ( 3/18 em) +% : = \: (med) 0.22222em ( 4/18 em) +% ; = \; (large) 0.27778em ( 5/18 em) +% ' = \quad 1em +% " = \qquad 2em +% . = 0.5\arraycolsep +% / = \arraycolsep +% ? = 2\arraycolsep +% * = 1fil +% + = \@IEEEeqnarraycolSEPcenter +% - = \@IEEEeqnarraycolSEPzero +% Note that all em values are referenced to the math font (textfont2) fontdimen6 +% value for 1em. +% +% use only the very first token to determine the type +\@IEEEextracttoken{#1}\relax +\ifx\@IEEEextractedtokensdiscarded\@empty\else + \typeout{** WARNING: IEEEeqnarray predefined inter-column glue type specifiers after the first in `\@IEEEextracttokenarg' ignored (line \the\inputlineno).}\relax +\fi +% get the math font 1em value +% LaTeX2e's NFSS2 does not preload the fonts, but \IEEEeqnarray needs +% to gain access to the math (\textfont2) font's spacing parameters. +% So we create a bogus box here that uses the math font to ensure +% that \textfont2 is loaded and ready. If this is not done, +% the \textfont2 stuff here may not work. +% Thanks to Bernd Raichle for his 1997 post on this topic. +{\setbox0=\hbox{$\displaystyle\relax$}}% +% fontdimen6 has the width of 1em (a quad). +\@IEEEtrantmpdimenA=\fontdimen6\textfont2\relax% +% identify the glue value based on the first token +% we discard anything after the first +\if!\@IEEEextractedtoken\@IEEEtrantmpdimenA=-0.16667\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else +\if,\@IEEEextractedtoken\@IEEEtrantmpdimenA=0.16667\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else +\if:\@IEEEextractedtoken\@IEEEtrantmpdimenA=0.22222\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else +\if;\@IEEEextractedtoken\@IEEEtrantmpdimenA=0.27778\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else +\if'\@IEEEextractedtoken\@IEEEtrantmpdimenA=1\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else +\if"\@IEEEextractedtoken\@IEEEtrantmpdimenA=2\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else +\if.\@IEEEextractedtoken\@IEEEtrantmpdimenA=0.5\arraycolsep\edef#2{\the\@IEEEtrantmpdimenA}\else +\if/\@IEEEextractedtoken\edef#2{\the\arraycolsep}\else +\if?\@IEEEextractedtoken\@IEEEtrantmpdimenA=2\arraycolsep\edef#2{\the\@IEEEtrantmpdimenA}\else +\if *\@IEEEextractedtoken\edef#2{0pt plus 1fil minus 0pt}\else +\if+\@IEEEextractedtoken\edef#2{\@IEEEeqnarraycolSEPcenter}\else +\if-\@IEEEextractedtoken\edef#2{\@IEEEeqnarraycolSEPzero}\else +\edef#2{\@IEEEeqnarraycolSEPzero}% +\@IEEEclspkgerror{Invalid predefined inter-column glue type "#1" in\MessageBreak +column specifications. Using a default value of\MessageBreak +0pt instead}% +{Only !,:;'"./?*+ and - are valid predefined glue types in the\MessageBreak +IEEEeqnarray column specifications.}\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} + + +% usage: \@IEEEprocessNcol{digit} +% process a numerical digit from the column specification +% and look up the corresponding user defined glue value +% can transform current type from n to g or a as the user defined glue is acquired +\def\@IEEEprocessNcol#1{\if\@IEEEBPprevtype g% +\@IEEEclspkgerror{Back-to-back inter-column glue specifiers in column\MessageBreak +specifications. Ignoring consecutive glue specifiers\MessageBreak +after the first}% +{You cannot have two or more glue types next to each other\MessageBreak +in the IEEEeqnarray column specifications.}% +\let\@IEEEBPcurtype=a% abort this glue, future digits will be discarded +\@IEEEBPcurnum=0\relax% +\else% if we previously aborted a glue +\if\@IEEEBPprevtype a\@IEEEBPcurnum=0\let\@IEEEBPcurtype=a%maintain digit abortion +\else%acquire this number +% save the previous type before the numerical digits started +\if\@IEEEBPprevtype n\else\let\@IEEEBPprevsavedtype=\@IEEEBPprevtype\fi% +\multiply\@IEEEBPcurnum by 10\relax% +\advance\@IEEEBPcurnum by #1\relax% add in number, \relax is needed to stop TeX's number scan +\if\@IEEEBPnexttype n\else%close acquisition +\expandafter\ifx\csname @IEEEeqnarraycolSEPDEF\expandafter\romannumeral\number\@IEEEBPcurnum\endcsname\@IEEEeqnarraycolisdefined% +\edef\@IEEEBPcurglue{\csname @IEEEeqnarraycolSEP\expandafter\romannumeral\number\@IEEEBPcurnum\endcsname}% +\else%user glue not defined +\@IEEEclspkgerror{Invalid user defined inter-column glue type "\number\@IEEEBPcurnum" in\MessageBreak +column specifications. Using a default value of\MessageBreak +0pt instead}% +{You must define all IEEEeqnarray numerical inter-column glue types via\MessageBreak +\string\IEEEeqnarraydefcolsep \space before they are used in column specifications.}% +\edef\@IEEEBPcurglue{\@IEEEeqnarraycolSEPzero}% +\fi% glue defined or not +\let\@IEEEBPcurtype=g% change the type to reflect the acquired glue +\let\@IEEEBPprevtype=\@IEEEBPprevsavedtype% restore the prev type before this number glue +\@IEEEBPcurnum=0\relax%ready for next acquisition +\fi%close acquisition, get glue +\fi%discard or acquire number +\fi%prevtype glue or not +} + + +% process an acquired glue +% add any acquired column/glue pair to the preamble +\def\@IEEEprocessGcol{\if\@IEEEBPprevtype a\let\@IEEEBPcurtype=a%maintain previous glue abortions +\else +% if this is the start glue, save it, but do nothing else +% as this is not used in the preamble, but before +\if\@IEEEBPprevtype s\edef\@IEEEBPstartglue{\@IEEEBPcurglue}% +\else%not the start glue +\if\@IEEEBPprevtype g%ignore if back to back glues +\@IEEEclspkgerror{Back-to-back inter-column glue specifiers in column\MessageBreak +specifications. Ignoring consecutive glue specifiers\MessageBreak +after the first}% +{You cannot have two or more glue types next to each other\MessageBreak +in the IEEEeqnarray column specifications.}% +\let\@IEEEBPcurtype=a% abort this glue +\else% not a back to back glue +\if\@IEEEBPprevtype c\relax% if the previoustype was a col, add column/glue pair to preamble +\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi +\toks0={##}% +% make preamble advance col counter if this environment needs this +\if@advanceIEEEeqncolcnt\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}\fi +% insert the column defintion into the preamble, being careful not to expand +% the column definition +\@IEEEappendtoksA{\tabskip=\@IEEEBPcurglue}% +\@IEEEappendNOEXPANDtoksA{\begingroup\csname @IEEEeqnarraycolPRE}% +\@IEEEappendtoksA{\@IEEEBPcurcolname}% +\@IEEEappendNOEXPANDtoksA{\endcsname}% +\@IEEEappendtoksA{\the\toks0}% +\@IEEEappendNOEXPANDtoksA{\relax\relax\relax\relax\relax% +\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST}% +\@IEEEappendtoksA{\@IEEEBPcurcolname}% +\@IEEEappendNOEXPANDtoksA{\endcsname\relax\relax\relax\relax\relax% +\relax\relax\relax\relax\relax\endgroup}% +\advance\@IEEEeqnnumcols by 1\relax%one more column in the preamble +\else% error: non-start glue with no pending column +\@IEEEclspkgerror{Inter-column glue specifier without a prior column\MessageBreak +type in the column specifications. Ignoring this glue\MessageBreak +specifier}% +{Except for the first and last positions, glue can be placed only\MessageBreak +between column types.}% +\let\@IEEEBPcurtype=a% abort this glue +\fi% previous was a column +\fi% back-to-back glues +\fi% is start column glue +\fi% prev type not a +} + + +% process an acquired letter referenced column and, if necessary, add it to the preamble +\def\@IEEEprocessCcol{\if\@IEEEBPnexttype g\else +\if\@IEEEBPnexttype n\else +% we have a column followed by something other than a glue (or numeral glue) +% so we must add this column to the preamble now +\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi%col separator for those after the first +\if\@IEEEBPnexttype e\@IEEEappendtoksA{\tabskip=\@IEEEBPendglue\relax}\else%put in end glue +\@IEEEappendtoksA{\tabskip=\@IEEEeqnarraycolSEPdefaultmid\relax}\fi% or default mid glue +\toks0={##}% +% make preamble advance col counter if this environment needs this +\if@advanceIEEEeqncolcnt\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}\fi +% insert the column definition into the preamble, being careful not to expand +% the column definition +\@IEEEappendNOEXPANDtoksA{\begingroup\csname @IEEEeqnarraycolPRE}% +\@IEEEappendtoksA{\@IEEEBPcurcolname}% +\@IEEEappendNOEXPANDtoksA{\endcsname}% +\@IEEEappendtoksA{\the\toks0}% +\@IEEEappendNOEXPANDtoksA{\relax\relax\relax\relax\relax% +\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST}% +\@IEEEappendtoksA{\@IEEEBPcurcolname}% +\@IEEEappendNOEXPANDtoksA{\endcsname\relax\relax\relax\relax\relax% +\relax\relax\relax\relax\relax\endgroup}% +\advance\@IEEEeqnnumcols by 1\relax%one more column in the preamble +\fi%next type not numeral +\fi%next type not glue +} + + +%% +%% END OF IEEEeqnarray DEFINITIONS +%% + + + + + +% set up the running headers and footers +% +% header and footer font and size specifications +\def\@IEEEheaderstyle{\normalfont\scriptsize} +\def\@IEEEfooterstyle{\normalfont\scriptsize} +% +% compsoc uses sans-serif headers and footers +\ifCLASSOPTIONcompsoc + \def\@IEEEheaderstyle{\normalfont\sffamily\scriptsize} + \def\@IEEEfooterstyle{\normalfont\sffamily\scriptsize} +\fi + + +% standard page style, ps@headings +\def\ps@headings{% default to standard twoside headers, no footers +% will change later if the mode requires otherwise +\def\@oddhead{\hbox{}\@IEEEheaderstyle\rightmark\hfil\thepage}\relax +\def\@evenhead{\@IEEEheaderstyle\thepage\hfil\leftmark\hbox{}}\relax +\let\@oddfoot\@empty +\let\@evenfoot\@empty +\ifCLASSOPTIONtechnote + % technote twoside + \def\@oddhead{\hbox{}\@IEEEheaderstyle\leftmark\hfil\thepage}\relax + \def\@evenhead{\@IEEEheaderstyle\thepage\hfil\leftmark\hbox{}}\relax +\fi +\ifCLASSOPTIONdraftcls + % draft footers + \def\@oddfoot{\@IEEEfooterstyle\@date\hfil DRAFT}\relax + \def\@evenfoot{\@IEEEfooterstyle DRAFT\hfil\@date}\relax +\fi +% oneside +\if@twoside\else + % standard one side headers + \def\@oddhead{\hbox{}\@IEEEheaderstyle\leftmark\hfil\thepage}\relax + \let\@evenhead\@empty + \ifCLASSOPTIONdraftcls + % oneside draft footers + \def\@oddfoot{\@IEEEfooterstyle\@date\hfil DRAFT}\relax + \let\@evenfoot\@empty + \fi +\fi +% turn off headers for conferences +\ifCLASSOPTIONconference + \let\@oddhead\@empty + \let\@evenhead\@empty +\fi +% turn off footers for draftclsnofoot +\ifCLASSOPTIONdraftclsnofoot + \let\@oddfoot\@empty + \let\@evenfoot\@empty +\fi} + + +% title page style, ps@IEEEtitlepagestyle +\def\ps@IEEEtitlepagestyle{% default title page headers, no footers +\def\@oddhead{\hbox{}\@IEEEheaderstyle\leftmark\hfil\thepage}\relax +\def\@evenhead{\@IEEEheaderstyle\thepage\hfil\leftmark\hbox{}}\relax +\let\@oddfoot\@empty +\let\@evenfoot\@empty +% will change later if the mode requires otherwise +\ifCLASSOPTIONdraftcls + % draft footers + \ifCLASSOPTIONdraftclsnofoot\else + % but only if not draftclsnofoot + \def\@oddfoot{\@IEEEfooterstyle\@date\hfil DRAFT}\relax + \def\@evenfoot{\@IEEEfooterstyle DRAFT\hfil\@date}\relax + \fi +\else + % all nondraft mode footers + \if@IEEEusingpubid + % for title pages that are using a pubid + % do not repeat pubid on the title page if using a peer review cover page + \ifCLASSOPTIONpeerreview\else + % for noncompsoc papers, the pubid uses footnotesize and + % is at the same vertical position as where the last baseline would normally be + \def\@oddfoot{\hbox{}\hss\@IEEEfooterstyle\footnotesize\raisebox{\footskip}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \def\@evenfoot{\hbox{}\hss\@IEEEfooterstyle\footnotesize\raisebox{\footskip}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \ifCLASSOPTIONcompsoc + % for compsoc papers, the pubid is at the same vertical position as the normal footer + \def\@oddfoot{\hbox{}\hss\@IEEEfooterstyle\raisebox{0pt}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \def\@evenfoot{\hbox{}\hss\@IEEEfooterstyle\raisebox{0pt}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \fi + \fi + \fi +\fi +% turn off headers for conferences +\ifCLASSOPTIONconference + \let\@oddhead\@empty + \let\@evenhead\@empty +\fi} + + +% peer review cover page style, ps@IEEEpeerreviewcoverpagestyle +\def\ps@IEEEpeerreviewcoverpagestyle{% default peer review cover no headers, no footers +\let\@oddhead\@empty +\let\@evenhead\@empty +\let\@oddfoot\@empty +\let\@evenfoot\@empty +% will change later if the mode requires otherwise +\ifCLASSOPTIONdraftcls + % draft footers + \ifCLASSOPTIONdraftclsnofoot\else + % but only if not draftclsnofoot + \def\@oddfoot{\@IEEEfooterstyle\@date\hfil DRAFT}\relax + \def\@evenfoot{\@IEEEfooterstyle DRAFT\hfil\@date}\relax + \fi +\else + % all nondraft mode footers + \if@IEEEusingpubid + % for peer review cover pages that are using a pubid + % for noncompsoc papers, the pubid uses footnotesize and + % is at the same vertical position as where the last baseline would normally be + \def\@oddfoot{\hbox{}\hss\@IEEEfooterstyle\footnotesize\raisebox{\footskip}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \def\@evenfoot{\hbox{}\hss\@IEEEfooterstyle\footnotesize\raisebox{\footskip}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \ifCLASSOPTIONcompsoc + % for compsoc papers, the pubid is at the same vertical position as the normal footer + \def\@oddfoot{\hbox{}\hss\@IEEEfooterstyle\raisebox{0pt}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \def\@evenfoot{\hbox{}\hss\@IEEEfooterstyle\raisebox{0pt}[0pt][0pt]{\@IEEEpubid}\hss\hbox{}}\relax + \fi + \fi +\fi} + + + +%% Defines the command for putting the header. +%% Note that all the text is forced into uppercase, if you have some text +%% that needs to be in lower case, for instance et. al., then either manually +%% set \leftmark and \rightmark or use \MakeLowercase{et. al.} within the +%% arguments to \markboth. +%% V1.7b add \protect to work with Babel +\def\markboth#1#2{\def\leftmark{\MakeUppercase{\protect#1}}% +\def\rightmark{\MakeUppercase{\protect#2}}} + +\def\today{\ifcase\month\or + January\or February\or March\or April\or May\or June\or + July\or August\or September\or October\or November\or December\fi + \space\number\day, \number\year} + + + + +%% CITATION AND BIBLIOGRAPHY COMMANDS +%% +%% V1.6 no longer supports the older, nonstandard \shortcite and \citename setup stuff +% +% +% Modify Latex2e \@citex to separate citations with "], [" +\def\@citex[#1]#2{% + \let\@citea\@empty + \@cite{\@for\@citeb:=#2\do + {\@citea\def\@citea{], [}% + \edef\@citeb{\expandafter\@firstofone\@citeb\@empty}% + \if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi + \@ifundefined{b@\@citeb}{\mbox{\reset@font\bfseries ?}% + \G@refundefinedtrue + \@latex@warning + {Citation `\@citeb' on page \thepage \space undefined}}% + {\hbox{\csname b@\@citeb\endcsname}}}}{#1}} + +% V1.6 we create hooks for the optional use of Donald Arseneau's +% cite.sty package. cite.sty is "smart" and will notice that the +% following format controls are already defined and will not +% redefine them. The result will be the proper sorting of the +% citation numbers and auto detection of 3 or more entry "ranges" - +% all in IEEE style: [1], [2], [5]--[7], [12] +% This also allows for an optional note, i.e., \cite[mynote]{..}. +% If the \cite with note has more than one reference, the note will +% be applied to the last of the listed references. It is generally +% desired that if a note is given, only one reference is listed in +% that \cite. +% Thanks to Mr. Arseneau for providing the required format arguments +% to produce the IEEE style. +\def\citepunct{], [} +\def\citedash{]--[} + +% V1.7 default to using same font for urls made by url.sty +\AtBeginDocument{\csname url@samestyle\endcsname} + +% V1.6 class files should always provide these +\def\newblock{\hskip .11em\@plus.33em\@minus.07em} +\let\@openbib@code\@empty +% V1.8b article.cls is now providing these too +% we do not use \@mkboth, nor alter the page style +\newenvironment{theindex} + {\if@twocolumn + \@restonecolfalse + \else + \@restonecoltrue + \fi + \twocolumn[\section*{\indexname}]% + \parindent\z@ + \parskip\z@ \@plus .3\p@\relax + \columnseprule \z@ + \columnsep 35\p@ + \let\item\@idxitem} + {\if@restonecol\onecolumn\else\clearpage\fi} +\newcommand\@idxitem{\par\hangindent 40\p@} +\newcommand\subitem{\@idxitem \hspace*{20\p@}} +\newcommand\subsubitem{\@idxitem \hspace*{30\p@}} +\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax} + + + +% Provide support for the control entries of IEEEtran.bst V1.00 and later. +% V1.7 optional argument allows for a different aux file to be specified in +% order to handle multiple bibliographies. For example, with multibib.sty: +% \newcites{sec}{Secondary Literature} +% \bstctlcite[@auxoutsec]{BSTcontrolhak} +\def\bstctlcite{\@ifnextchar[{\@bstctlcite}{\@bstctlcite[@auxout]}} +\def\@bstctlcite[#1]#2{\@bsphack + \@for\@citeb:=#2\do{% + \edef\@citeb{\expandafter\@firstofone\@citeb}% + \if@filesw\immediate\write\csname #1\endcsname{\string\citation{\@citeb}}\fi}% + \@esphack} + +% \IEEEnoauxwrite{} allows for citations that do not add to or affect +% the order of the existing citation list. Can be useful for \cite +% within \thanks{}. +\DeclareRobustCommand{\IEEEnoauxwrite}[1]{\relax +\if@filesw +\@fileswfalse +#1\relax\relax\relax\relax\relax +\@fileswtrue +\else +#1\relax\relax\relax\relax\relax +\fi} + +% V1.6 provide a way for a user to execute a command just before +% a given reference number - used to insert a \newpage to balance +% the columns on the last page +\edef\@IEEEtriggerrefnum{0} % the default of zero means that + % the command is not executed +\def\@IEEEtriggercmd{\newpage} + +% allow the user to alter the triggered command +\long\def\IEEEtriggercmd#1{\long\def\@IEEEtriggercmd{#1}} + +% allow user a way to specify the reference number just before the +% command is executed +\def\IEEEtriggeratref#1{\@IEEEtrantmpcountA=#1% +\edef\@IEEEtriggerrefnum{\the\@IEEEtrantmpcountA}}% + +% trigger command at the given reference +\def\@IEEEbibitemprefix{\@IEEEtrantmpcountA=\@IEEEtriggerrefnum\relax% +\advance\@IEEEtrantmpcountA by -1\relax% +\ifnum\c@enumiv=\@IEEEtrantmpcountA\relax\@IEEEtriggercmd\relax\fi} + + +\def\@biblabel#1{[#1]} + +% compsoc journals and conferences left align the reference numbers +\@IEEEcompsoconly{\def\@biblabel#1{[#1]\hfill}} + +% controls bib item spacing +\def\IEEEbibitemsep{0pt plus .5pt} + +\@IEEEcompsocconfonly{\def\IEEEbibitemsep{0.5\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}} + + +\def\thebibliography#1{\section*{\refname}% + \addcontentsline{toc}{section}{\refname}% + % V1.6 add some rubber space here and provide a command trigger + \footnotesize\vskip 0.3\baselineskip plus 0.1\baselineskip minus 0.1\baselineskip% + \list{\@biblabel{\@arabic\c@enumiv}}% + {\settowidth\labelwidth{\@biblabel{#1}}% + \leftmargin\labelwidth + \advance\leftmargin\labelsep\relax + \itemsep \IEEEbibitemsep\relax + \usecounter{enumiv}% + \let\p@enumiv\@empty + \renewcommand\theenumiv{\@arabic\c@enumiv}}% + \let\@IEEElatexbibitem\bibitem% + \def\bibitem{\@IEEEbibitemprefix\@IEEElatexbibitem}% +\def\newblock{\hskip .11em plus .33em minus .07em}% +% originally: +% \sloppy\clubpenalty4000\widowpenalty4000% +% by adding the \interlinepenalty here, we make it more +% difficult, but not impossible, for LaTeX to break within a reference. +% The IEEE almost never breaks a reference (but they do it more often with +% technotes). You may get an underfull vbox warning around the bibliography, +% but the final result will be much more like what the IEEE will publish. +% MDS 11/2000 +\ifCLASSOPTIONtechnote\sloppy\clubpenalty4000\widowpenalty4000\interlinepenalty100% +\else\sloppy\clubpenalty4000\widowpenalty4000\interlinepenalty500\fi% + \sfcode`\.=1000\relax} +\let\endthebibliography=\endlist + + + + +% TITLE PAGE COMMANDS +% +% +% \IEEEmembership is used to produce the sublargesize italic font used to indicate author +% IEEE membership. compsoc uses a large size sans slant font +\def\IEEEmembership#1{{\@IEEEnotcompsoconly{\sublargesize}\normalfont\@IEEEcompsoconly{\sffamily}\textit{#1}}} + + +% \IEEEauthorrefmark{} produces a footnote type symbol to indicate author affiliation. +% When given an argument of 1 to 9, \IEEEauthorrefmark{} follows the standard LaTeX footnote +% symbol sequence convention. However, for arguments 10 and above, \IEEEauthorrefmark{} +% reverts to using lower case roman numerals, so it cannot overflow. Do note that you +% cannot use \footnotemark[] in place of \IEEEauthorrefmark{} within \author as the footnote +% symbols will have been turned off to prevent \thanks from creating footnote marks. +% \IEEEauthorrefmark{} produces a symbol that appears to LaTeX as having zero vertical +% height - this allows for a more compact line packing, but the user must ensure that +% the interline spacing is large enough to prevent \IEEEauthorrefmark{} from colliding +% with the text above. +% V1.7 make this a robust command +% V1.8 transmag uses an arabic author affiliation symbol +\ifCLASSOPTIONtransmag +\DeclareRobustCommand*{\IEEEauthorrefmark}[1]{\raisebox{0pt}[0pt][0pt]{\textsuperscript{\footnotesize #1}}} +\else +\DeclareRobustCommand*{\IEEEauthorrefmark}[1]{\raisebox{0pt}[0pt][0pt]{\textsuperscript{\footnotesize\ensuremath{\ifcase#1\or *\or \dagger\or \ddagger\or% + \mathsection\or \mathparagraph\or \|\or **\or \dagger\dagger% + \or \ddagger\ddagger \else\textsuperscript{\expandafter\romannumeral#1}\fi}}}} +\fi + + +% FONT CONTROLS AND SPACINGS FOR CONFERENCE MODE AUTHOR NAME AND AFFILIATION BLOCKS +% +% The default font styles for the author name and affiliation blocks (confmode) +\def\@IEEEauthorblockNstyle{\normalfont\@IEEEcompsocnotconfonly{\sffamily}\sublargesize} +\def\@IEEEauthorblockAstyle{\normalfont\@IEEEcompsocnotconfonly{\sffamily}\@IEEEcompsocconfonly{\itshape}\normalsize} +% The default if the user does not use an author block +\def\@IEEEauthordefaulttextstyle{\normalfont\@IEEEcompsocnotconfonly{\sffamily}\sublargesize} + +% adjustment spacing from title (or special paper notice) to author name blocks (confmode) +% can be negative +\def\@IEEEauthorblockconfadjspace{-0.25em} +% compsoc conferences need more space here +\@IEEEcompsocconfonly{\def\@IEEEauthorblockconfadjspace{0.75\@IEEEnormalsizeunitybaselineskip}} + +% spacing between name and affiliation blocks (confmode) +% This can be negative. +% The IEEE doesn't want any added spacing here, but I will leave these +% controls in place in case they ever change their mind. +% Personally, I like 0.75ex. +%\def\@IEEEauthorblockNtopspace{0.75ex} +%\def\@IEEEauthorblockAtopspace{0.75ex} +\def\@IEEEauthorblockNtopspace{0.0ex} +\def\@IEEEauthorblockAtopspace{0.0ex} +\ifCLASSOPTIONtransmag +% transmag uses one line of space above first affiliation block +\def\@IEEEauthorblockAtopspace{1\@IEEEnormalsizeunitybaselineskip} +\fi + +% baseline spacing within name and affiliation blocks (confmode) +% must be positive, spacings below certain values will make +% the position of line of text sensitive to the contents of the +% line above it i.e., whether or not the prior line has descenders, +% subscripts, etc. For this reason it is a good idea to keep +% these above 2.6ex +\def\@IEEEauthorblockNinterlinespace{2.6ex} +\def\@IEEEauthorblockAinterlinespace{2.75ex} + +% This tracks the required strut size. +% See the \@IEEEauthorhalign command for the actual default value used. +\def\@IEEEauthorblockXinterlinespace{2.7ex} + +% variables to retain font size and style across groups +% values given here have no effect as they will be overwritten later +\gdef\@IEEESAVESTATEfontsize{10} +\gdef\@IEEESAVESTATEfontbaselineskip{12} +\gdef\@IEEESAVESTATEfontencoding{OT1} +\gdef\@IEEESAVESTATEfontfamily{ptm} +\gdef\@IEEESAVESTATEfontseries{m} +\gdef\@IEEESAVESTATEfontshape{n} + +% saves the current font attributes +\def\@IEEEcurfontSAVE{\global\let\@IEEESAVESTATEfontsize\f@size% +\global\let\@IEEESAVESTATEfontbaselineskip\f@baselineskip% +\global\let\@IEEESAVESTATEfontencoding\f@encoding% +\global\let\@IEEESAVESTATEfontfamily\f@family% +\global\let\@IEEESAVESTATEfontseries\f@series% +\global\let\@IEEESAVESTATEfontshape\f@shape} + +% restores the saved font attributes +\def\@IEEEcurfontRESTORE{\fontsize{\@IEEESAVESTATEfontsize}{\@IEEESAVESTATEfontbaselineskip}% +\fontencoding{\@IEEESAVESTATEfontencoding}% +\fontfamily{\@IEEESAVESTATEfontfamily}% +\fontseries{\@IEEESAVESTATEfontseries}% +\fontshape{\@IEEESAVESTATEfontshape}% +\selectfont} + + +% variable to indicate if the current block is the first block in the column +\newif\if@IEEEprevauthorblockincol \@IEEEprevauthorblockincolfalse + + +% the command places a strut with height and depth = \@IEEEauthorblockXinterlinespace +% we use this technique to have complete manual control over the spacing of the lines +% within the halign environment. +% We set the below baseline portion at 30%, the above +% baseline portion at 70% of the total length. +% Responds to changes in the document's \baselinestretch +\def\@IEEEauthorstrutrule{\@IEEEtrantmpdimenA\@IEEEauthorblockXinterlinespace% +\@IEEEtrantmpdimenA=\baselinestretch\@IEEEtrantmpdimenA% +\rule[-0.3\@IEEEtrantmpdimenA]{0pt}{\@IEEEtrantmpdimenA}} + + +% blocks to hold the authors' names and affilations. +% Makes formatting easy for conferences +% +% use real definitions in conference mode +% name block +\def\IEEEauthorblockN#1{\relax\@IEEEauthorblockNstyle% set the default text style +\gdef\@IEEEauthorblockXinterlinespace{0pt}% disable strut for spacer row +% the \expandafter hides the \cr in conditional tex, see the array.sty docs +% for details, probably not needed here as the \cr is in a macro +% do a spacer row if needed +\if@IEEEprevauthorblockincol\expandafter\@IEEEauthorblockNtopspaceline\fi +\global\@IEEEprevauthorblockincoltrue% we now have a block in this column +%restore the correct strut value +\gdef\@IEEEauthorblockXinterlinespace{\@IEEEauthorblockNinterlinespace}% +% input the author names +#1% +% end the row if the user did not already +\crcr} +% spacer row for names +\def\@IEEEauthorblockNtopspaceline{\cr\noalign{\vskip\@IEEEauthorblockNtopspace}} +% +% affiliation block +\def\IEEEauthorblockA#1{\relax\@IEEEauthorblockAstyle% set the default text style +\gdef\@IEEEauthorblockXinterlinespace{0pt}%disable strut for spacer row +% the \expandafter hides the \cr in conditional tex, see the array.sty docs +% for details, probably not needed here as the \cr is in a macro +% do a spacer row if needed +\if@IEEEprevauthorblockincol\expandafter\@IEEEauthorblockAtopspaceline\fi +\global\@IEEEprevauthorblockincoltrue% we now have a block in this column +%restore the correct strut value +\gdef\@IEEEauthorblockXinterlinespace{\@IEEEauthorblockAinterlinespace}% +% input the author affiliations +#1% +% end the row if the user did not already +\crcr +% V1.8 transmag does not use any additional affiliation spacing after the first author +\ifCLASSOPTIONtransmag\gdef\@IEEEauthorblockAtopspace{0pt}\fi} + +% spacer row for affiliations +\def\@IEEEauthorblockAtopspaceline{\cr\noalign{\vskip\@IEEEauthorblockAtopspace}} + + +% allow papers to compile even if author blocks are used in modes other +% than conference or peerreviewca. For such cases, we provide dummy blocks. +\ifCLASSOPTIONconference +\else + \ifCLASSOPTIONpeerreviewca\else + % not conference, peerreviewca or transmag mode + \ifCLASSOPTIONtransmag\else + \def\IEEEauthorblockN#1{#1}% + \def\IEEEauthorblockA#1{#1}% + \fi + \fi +\fi + + + +% we provide our own halign so as not to have to depend on tabular +\def\@IEEEauthorhalign{\@IEEEauthordefaulttextstyle% default text style + \lineskip=0pt\relax% disable line spacing + \lineskiplimit=0pt\relax% + \baselineskip=0pt\relax% + \@IEEEcurfontSAVE% save the current font + \mathsurround\z@\relax% no extra spacing around math + \let\\\@IEEEauthorhaligncr% replace newline with halign friendly one + \tabskip=0pt\relax% no column spacing + \everycr{}% ensure no problems here + \@IEEEprevauthorblockincolfalse% no author blocks yet + \def\@IEEEauthorblockXinterlinespace{2.7ex}% default interline space + \vtop\bgroup%vtop box + \halign\bgroup&\relax\hfil\@IEEEcurfontRESTORE\relax ##\relax + \hfil\@IEEEcurfontSAVE\@IEEEauthorstrutrule\cr} + +% ensure last line, exit from halign, close vbox +\def\end@IEEEauthorhalign{\crcr\egroup\egroup} + +% handle bogus star form +\def\@IEEEauthorhaligncr{{\ifnum0=`}\fi\@ifstar{\@@IEEEauthorhaligncr}{\@@IEEEauthorhaligncr}} + +% test and setup the optional argument to \\[] +\def\@@IEEEauthorhaligncr{\@testopt\@@@IEEEauthorhaligncr\z@skip} + +% end the line and do the optional spacer +\def\@@@IEEEauthorhaligncr[#1]{\ifnum0=`{\fi}\cr\noalign{\vskip#1\relax}} + + + +% flag to prevent multiple \and warning messages +\newif\if@IEEEWARNand +\@IEEEWARNandtrue + +% if in conference or peerreviewca modes, we support the use of \and as \author is a +% tabular environment, otherwise we warn the user that \and is invalid +% outside of conference or peerreviewca modes. +\def\and{\relax} % provide a bogus \and that we will then override + +\renewcommand{\and}[1][\relax]{\if@IEEEWARNand\typeout{** WARNING: \noexpand\and is valid only + when in conference or peerreviewca}\typeout{modes (line \the\inputlineno).}\fi\global\@IEEEWARNandfalse} + +\ifCLASSOPTIONconference% +\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}% +\fi +\ifCLASSOPTIONpeerreviewca +\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}% +\fi +% V1.8 transmag uses conference author format +\ifCLASSOPTIONtransmag +\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}% +\fi + +% page clearing command +% based on LaTeX2e's \cleardoublepage, but allows different page styles +% for the inserted blank pages +\def\@IEEEcleardoublepage#1{\clearpage\if@twoside\ifodd\c@page\else +\hbox{}\thispagestyle{#1}\newpage\if@twocolumn\hbox{}\thispagestyle{#1}\newpage\fi\fi\fi} + +% V1.8b hooks to allow adjustment of space above title +\def\IEEEtitletopspace{0.5\baselineskip} +% an added extra amount to allow for adjustment/offset +\def\IEEEtitletopspaceextra{0pt} + +% user command to invoke the title page +\def\maketitle{\par% + \begingroup% + \normalfont% + \def\thefootnote{}% the \thanks{} mark type is empty + \def\footnotemark{}% and kill space from \thanks within author + \let\@makefnmark\relax% V1.7, must *really* kill footnotemark to remove all \textsuperscript spacing as well. + \footnotesize% equal spacing between thanks lines + \footnotesep 0.7\baselineskip%see global setting of \footnotesep for more info + % V1.7 disable \thanks note indention for compsoc + \@IEEEcompsoconly{\long\def\@makefntext##1{\parindent 1em\noindent\hbox{\@makefnmark}##1}}% + \normalsize% + \ifCLASSOPTIONpeerreview + \newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext% + \thispagestyle{IEEEpeerreviewcoverpagestyle}\@thanks% + \else + \if@twocolumn% + \ifCLASSOPTIONtechnote% + \newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext% + \else + \twocolumn[{\IEEEquantizevspace{\@maketitle}[\IEEEquantizedisabletitlecmds]{0pt}[-\topskip]{\baselineskip}{\@IEEENORMtitlevspace}{\@IEEEMINtitlevspace}\@IEEEaftertitletext}]% + \fi + \else + \newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext% + \fi + \thispagestyle{IEEEtitlepagestyle}\@thanks% + \fi + % pullup page for pubid if used. + \if@IEEEusingpubid + \enlargethispage{-\@IEEEpubidpullup}% + \fi + \endgroup + \setcounter{footnote}{0}\let\maketitle\relax\let\@maketitle\relax + \gdef\@thanks{}% + % v1.6b do not clear these as we will need the title again for peer review papers + % \gdef\@author{}\gdef\@title{}% + \let\thanks\relax} + + +% V1.8 parbox to format \@IEEEtitleabstractindextext +\long\def\@IEEEtitleabstractindextextbox#1{\parbox{1\textwidth}{#1}} +% V1.8 compsoc is partial width +\ifCLASSOPTIONcompsoc +% comparison with proofs suggests it's in the range of 92.1-92.3% +\long\def\@IEEEtitleabstractindextextbox#1{\parbox{0.922\textwidth}{\@IEEEcompsocnotconfonly{\rightskip\@flushglue\leftskip\z@skip}#1}} +\fi + +% formats the Title, authors names, affiliations and special paper notice +% THIS IS A CONTROLLED SPACING COMMAND! Do not allow blank lines or unintentional +% spaces to enter the definition - use % at the end of each line +\def\@maketitle{\newpage +\bgroup\par\vskip\IEEEtitletopspace\vskip\IEEEtitletopspaceextra\centering% +\ifCLASSOPTIONtechnote% technotes, V1.8a abstract and index terms are not treated differently for compsoc technotes + {\bfseries\large\@IEEEcompsoconly{\Large\sffamily}\@title\par}\vskip 1.3em{\lineskip .5em\@IEEEcompsoconly{\large\sffamily}\@author + \@IEEEspecialpapernotice\par}\relax +\else% not a technote + \vskip0.2em{\Huge\ifCLASSOPTIONtransmag\bfseries\LARGE\fi\@IEEEcompsoconly{\sffamily}\@IEEEcompsocconfonly{\normalfont\normalsize\vskip 2\@IEEEnormalsizeunitybaselineskip + \bfseries\Large}\@IEEEcompsocnotconfonly{\vskip 0.75\@IEEEnormalsizeunitybaselineskip}\@title\par}\relax + \@IEEEcompsocnotconfonly{\vskip 0.5\@IEEEnormalsizeunitybaselineskip}\vskip1.0em\par% + % V1.6 handle \author differently if in conference mode + \ifCLASSOPTIONconference% + {\@IEEEspecialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace% + \mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par}\relax + \else% peerreviewca, peerreview or journal + \ifCLASSOPTIONpeerreviewca + % peerreviewca handles author names just like conference mode + {\@IEEEcompsoconly{\sffamily}\@IEEEspecialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace% + \mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par + {\@IEEEcompsoconly{\vskip 1.5em\relax + \@IEEEtitleabstractindextextbox{\@IEEEtitleabstractindextext}\par\noindent\hfill + \IEEEcompsocdiamondline\hfill\hbox{}\par}}}\relax + \else% journal, peerreview or transmag + \ifCLASSOPTIONtransmag + % transmag also handles author names just like conference mode + % it also uses \@IEEEtitleabstractindextex, but with one line less + % space above, and one more below + {\@IEEEspecialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace% + \mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par + {\vspace{0.5\baselineskip}\relax\@IEEEtitleabstractindextextbox{\@IEEEtitleabstractindextext}\vspace{-1\baselineskip}\par}}\relax + \else% journal or peerreview + {\lineskip.5em\@IEEEcompsoconly{\sffamily}\sublargesize\@author\@IEEEspecialpapernotice\par + {\@IEEEcompsoconly{\vskip 1.5em\relax + \@IEEEtitleabstractindextextbox{\@IEEEtitleabstractindextext}\par\noindent\hfill + \IEEEcompsocdiamondline\hfill\hbox{}\par}}}\relax + \fi + \fi + \fi +\fi\par\addvspace{0.5\baselineskip}\egroup} + + +% V1.7 Computer Society "diamond line" which follows index terms for nonconference papers +% V1.8a full width diamond line for single column use +\def\@IEEEcompsocdiamondlinei{\vrule depth 0pt height 0.5pt width 4cm\nobreak\hspace{7.5pt}\nobreak +\raisebox{-3.5pt}{\fontfamily{pzd}\fontencoding{U}\fontseries{m}\fontshape{n}\fontsize{11}{12}\selectfont\char70}\nobreak +\hspace{7.5pt}\nobreak\vrule depth 0pt height 0.5pt width 4cm\relax} +% V1.8a narrower width diamond line for double column use +\def\@IEEEcompsocdiamondlineii{\vrule depth 0pt height 0.5pt width 2.5cm\nobreak\hspace{7.5pt}\nobreak +\raisebox{-3.5pt}{\fontfamily{pzd}\fontencoding{U}\fontseries{m}\fontshape{n}\fontsize{11}{12}\selectfont\char70}\nobreak +\hspace{7.5pt}\nobreak\vrule depth 0pt height 0.5pt width 2.5cm\relax} +% V1.8a bare core without rules to base a last resort on for very narrow linewidths +\def\@IEEEcompsocdiamondlineiii{\mbox{}\nobreak\hspace{7.5pt}\nobreak +\raisebox{-3.5pt}{\fontfamily{pzd}\fontencoding{U}\fontseries{m}\fontshape{n}\fontsize{11}{12}\selectfont\char70}\nobreak +\hspace{7.5pt}\nobreak\mbox{}\relax} + +% V1.8a allow \IEEEcompsocdiamondline to adjust for different linewidths. +% Use \@IEEEcompsocdiamondlinei if its width is less than 0.66\linewidth (0.487 nominal for single column) +% if not, fall back to \@IEEEcompsocdiamondlineii if its width is less than 0.75\linewidth (0.659 nominal for double column) +% if all else fails, try to make a custom diamondline based on the abnormally narrow linewidth +\def\IEEEcompsocdiamondline{\settowidth{\@IEEEtrantmpdimenA}{\@IEEEcompsocdiamondlinei}\relax +\ifdim\@IEEEtrantmpdimenA<0.66\linewidth\relax\@IEEEcompsocdiamondlinei\relax +\else +\settowidth{\@IEEEtrantmpdimenA}{\@IEEEcompsocdiamondlineii}\relax +\ifdim\@IEEEtrantmpdimenA<0.75\linewidth\relax\@IEEEcompsocdiamondlineii\relax +\else +\settowidth{\@IEEEtrantmpdimenA}{\@IEEEcompsocdiamondlineiii}\relax +\@IEEEtrantmpdimenB=\linewidth\relax +\addtolength{\@IEEEtrantmpdimenB}{-1\@IEEEtrantmpdimenA}\relax +\vrule depth 0pt height 0.5pt width 0.33\@IEEEtrantmpdimenB\@IEEEcompsocdiamondlineiii\vrule depth 0pt height 0.5pt width 0.33\@IEEEtrantmpdimenB\relax +\fi\fi} + + +% V1.7 standard LateX2e \thanks, but with \itshape under compsoc. Also make it a \long\def +% We also need to trigger the one-shot footnote rule +\def\@IEEEtriggeroneshotfootnoterule{\global\@IEEEenableoneshotfootnoteruletrue} + + +\long\def\thanks#1{\footnotemark + \protected@xdef\@thanks{\@thanks + \protect\footnotetext[\the\c@footnote]{\@IEEEcompsoconly{\itshape + \protect\@IEEEtriggeroneshotfootnoterule\relax}\ignorespaces#1}}} +\let\@thanks\@empty + + +% V1.7 allow \author to contain \par's. This is needed to allow \thanks to contain \par. +\long\def\author#1{\gdef\@author{#1}} + + +% in addition to setting up IEEEitemize, we need to remove a baselineskip space above and +% below it because \list's \pars introduce blank lines because of the footnote struts. +\def\@IEEEsetupcompsocitemizelist{\def\labelitemi{$\bullet$}% +\setlength{\IEEElabelindent}{0pt}\setlength{\labelsep}{1.2em}\setlength{\parskip}{0pt}% +\setlength{\partopsep}{0pt}\setlength{\topsep}{0.5\baselineskip}\vspace{-1\baselineskip}\relax} + + +% flag for fake non-compsoc \IEEEcompsocthanksitem - prevents line break on very first item +\newif\if@IEEEbreakcompsocthanksitem \@IEEEbreakcompsocthanksitemfalse + +\ifCLASSOPTIONcompsoc +% V1.7 compsoc bullet item \thanks +% also, we need to redefine this to destroy the argument in \IEEEquantizevspace +\long\def\IEEEcompsocitemizethanks#1{\relax\@IEEEbreakcompsocthanksitemfalse\footnotemark + \protected@xdef\@thanks{\@thanks + \protect\footnotetext[\the\c@footnote]{\itshape\protect\@IEEEtriggeroneshotfootnoterule + {\let\IEEEiedlistdecl\relax\protect\begin{IEEEitemize}[\protect\@IEEEsetupcompsocitemizelist]\ignorespaces#1\relax + \protect\end{IEEEitemize}}\protect\vspace{-1\baselineskip}}}} +\DeclareRobustCommand*{\IEEEcompsocthanksitem}{\item} +\else +% non-compsoc, allow for dual compilation via rerouting to normal \thanks +\long\def\IEEEcompsocitemizethanks#1{\thanks{#1}} +% redirect to "pseudo-par" \hfil\break\indent after swallowing [] from \IEEEcompsocthanksitem[] +\DeclareRobustCommand{\IEEEcompsocthanksitem}{\@ifnextchar [{\@IEEEthanksswallowoptionalarg}% +{\@IEEEthanksswallowoptionalarg[\relax]}} +% be sure and break only after first item, be sure and ignore spaces after optional argument +\def\@IEEEthanksswallowoptionalarg[#1]{\relax\if@IEEEbreakcompsocthanksitem\hfil\break +\indent\fi\@IEEEbreakcompsocthanksitemtrue\ignorespaces} +\fi + + +% V1.6b define the \IEEEpeerreviewmaketitle as needed +\ifCLASSOPTIONpeerreview +\def\IEEEpeerreviewmaketitle{\@IEEEcleardoublepage{empty}% +\ifCLASSOPTIONtwocolumn +\twocolumn[{\IEEEquantizevspace{\@IEEEpeerreviewmaketitle}[\IEEEquantizedisabletitlecmds]{0pt}[-\topskip]{\baselineskip}{\@IEEENORMtitlevspace}{\@IEEEMINtitlevspace}}] +\else +\newpage\@IEEEpeerreviewmaketitle\@IEEEstatictitlevskip +\fi +\thispagestyle{IEEEtitlepagestyle}} +\else +% \IEEEpeerreviewmaketitle does nothing if peer review option has not been selected +\def\IEEEpeerreviewmaketitle{\relax} +\fi + +% peerreview formats the repeated title like the title in journal papers. +\def\@IEEEpeerreviewmaketitle{\bgroup\par\addvspace{0.5\baselineskip}\centering\@IEEEcompsoconly{\sffamily}% +\normalfont\normalsize\vskip0.2em{\Huge\@title\par}\vskip1.0em\par +\par\addvspace{0.5\baselineskip}\egroup} + + + +% V1.6 +% this is a static rubber spacer between the title/authors and the main text +% used for single column text, or when the title appears in the first column +% of two column text (technotes). +\def\@IEEEstatictitlevskip{{\normalfont\normalsize +% adjust spacing to next text +% v1.6b handle peer review papers +\ifCLASSOPTIONpeerreview +% for peer review papers, the same value is used for both title pages +% regardless of the other paper modes + \vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip +\else + \ifCLASSOPTIONconference% conference + \vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip% + \else% + \ifCLASSOPTIONtechnote% technote + \vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip% + \else% journal uses more space + \vskip 2.5\baselineskip plus 0.75\baselineskip minus 0.375\baselineskip% + \fi + \fi +\fi}} + + +% set the nominal and minimum values for the quantized title spacer +% the quantization algorithm will not allow the spacer size to +% become less than \@IEEEMINtitlevspace - instead it will be lengthened +% default to journal values +\def\@IEEENORMtitlevspace{2.5\baselineskip} +\def\@IEEEMINtitlevspace{2\baselineskip} +% conferences and technotes need tighter spacing +\ifCLASSOPTIONconference% conference + \def\@IEEENORMtitlevspace{1\baselineskip} + \def\@IEEEMINtitlevspace{0.75\baselineskip} +\fi +\ifCLASSOPTIONtechnote% technote + \def\@IEEENORMtitlevspace{1\baselineskip} + \def\@IEEEMINtitlevspace{0.75\baselineskip} +\fi + + +% V1.8a +\def\IEEEquantizevspace{\begingroup\@ifstar{\@IEEEquantizevspacestarformtrue\@IEEEquantizevspace}{\@IEEEquantizevspacestarformfalse\@IEEEquantizevspace}} +% \IEEEquantizevspace[output dimen register]{object}[object decl] +% {top baselineskip} +% [offset][prevdepth][lineskip limit][lineskip] +% {unit height}{nominal vspace}{minimum vspace} +% +% Calculates and creates the vspace needed to make the combined height with +% the given object an integer multiple of the given unit height. This command +% is more general than the older \@IEEEdynamictitlevspace it replaces. +% +% The star form has no effect at present, but is reserved for future use. +% +% If the optional argument [output dimen register] is given, the calculated +% vspace height is stored in the given output dimen (or skip) register +% and no other action is taken, otherwise the object followed by a vspace* +% of the appropriate height is evaluated/output. +% +% The optional object decl (declarations) is code that is evaluated just +% before the object's height is evaluated. Its intented purpose is to allow +% for the alteration or disabling of code within the object during internal +% height evaluation (e.g., \long\def\thanks#1{\relax} ). +% This special code is not invoked if/when the object is rendered at the end. +% +% The nominal vspace is the target value of the added vspace and the minimum +% vspace is the lower allowed limit. The vspacer will be the value that achieves +% integral overall height, in terms of the given unit height, that is closest +% to the nominal vspace and that is not less than the specified minimum vspace. +% +% The line spacing algorithm of TeX is somewhat involved and requires special +% care with regard to the first line of a vertical list (which is indicated +% when \prevdepth is -1000pt or less). top baselineskip specifies the +% baselineskip or topskip used prior to the object. If the height of the +% first line of the object is greater than the given top baselineskip, then +% the top baselineskip is subtracted from the height of the first line and +% that difference is considered along with the rest of the object height +% (because the object will be shifted down by an amount = +% top line height - top baselineskip). Otherwise, the height of the first line +% of the object is ignored as far as the calculations are concerned. +% This algorithm is adequate for objects that appear at the top of a page +% (e.g., titles) where \topskip spacing is used. +% +% However, as explained on page 78 of the TeXbook, interline spacing is more +% complex when \baselineskip is being used (indicated by \prevdepth > +% -1000pt). The four optional parameters offset, prevdepth, lineskip limit and +% lineskip are assumed to be equal to be 0pt, \prevdepth, \lineskiplimit and +% \lineskip, respectively, if they are omitted. +% +% The prevdepth is the depth of the line before the object, the lineskip limit +% specifies how close the top of the object can come to the bottom of the +% previous line before \baselineskip is ignored and \lineskip is inserted +% between the object and the line above it. Lineskip does not come into +% play unless the first line of the object is high enough to "get too close" +% (as specified by lineskiplimit) to the line before it. The the prevdepth, +% lineskip limit, and lineskip optional parameters are not needed for the +% first object/line on a page (i.e., prevdepth <= -1000pt) where the simplier +% \topskip spacing rules are in effect. +% +% Offset is a manual adjustment that is added to the height calculations of +% object irrespective of the value of \prevdepth. It is useful when the top +% baselineskip will result in a noninteger unit height object placement even +% if the object itself has integral height. e.g., a footnotesize baselineskip +% is used before the object, thus an offset of, say -3pt, can be given as a +% correction. + +% Common combinations of these parameters include: +% +% top baselineskip: (and default values for offset, prevdepth, etc.) +% \topskip % for objects that appear at the top of a page +% \maxdimen % always ignore the height of the top line +% 0pt % always consider any positive height of the top line +% +% for objects to appear inline in normal text: +% top baselineskip = \baselineskip +% +% set prevdepth = -1000pt and top baselineskip = 0pt to consider the +% overall height of the object without any other external skip +% consideration + +\newif\if@IEEEquantizevspacestarform % flag to indicate star form +\newif\if@IEEEquantizevspaceuseoutdimenreg % flag to indicate output dimen register is to be used +% Use our own private registers because the object could contain a +% structure that uses the existing tmp scratch pad registers +\newdimen\@IEEEquantizeheightA +\newdimen\@IEEEquantizeheightB +\newdimen\@IEEEquantizeheightC +\newdimen\@IEEEquantizeprevdepth % need to save this early as can change +\newcount\@IEEEquantizemultiple +\newbox\@IEEEquantizeboxA + + +\def\@IEEEquantizevspace{\@ifnextchar [{\@IEEEquantizevspaceuseoutdimenregtrue\@@IEEEquantizevspace}{\@IEEEquantizevspaceuseoutdimenregfalse\@@IEEEquantizevspace[]}} + + +\long\def\@@IEEEquantizevspace[#1]#2{\relax +% acquire and store +% #1 optional output dimen register +% #2 object +\edef\@IEEEquantizeoutdimenreg{#1}\relax +% allow for object specifications that contain parameters +\@IEEEtrantmptoksA={#2}\relax +\long\edef\@IEEEquantizeobject{\the\@IEEEtrantmptoksA}\relax +\@ifnextchar [{\@@@IEEEquantizevspace}{\@@@IEEEquantizevspace[\relax]}} + +\long\def\@@@IEEEquantizevspace[#1]#2{\relax +% acquire and store +% [#1] optional object decl, is \relax if not given by user +% #2 top baselineskip +% allow for object decl specifications that have parameters +\@IEEEtrantmptoksA={#1}\relax +\long\edef\@IEEEquantizeobjectdecl{\the\@IEEEtrantmptoksA}\relax +\edef\@IEEEquantizetopbaselineskip{#2}\ivIEEEquantizevspace} + +% acquire optional argument set and store +% [offset][prevdepth][lineskip limit][lineskip] +\def\ivIEEEquantizevspace{\@ifnextchar [{\@vIEEEquantizevspace}{\@vIEEEquantizevspace[0pt]}} +\def\@vIEEEquantizevspace[#1]{\edef\@IEEEquantizeoffset{#1}\@ifnextchar [{\@viIEEEquantizevspace}{\@viIEEEquantizevspace[\prevdepth]}} +\def\@viIEEEquantizevspace[#1]{\@IEEEquantizeprevdepth=#1\relax\@ifnextchar [{\@viiIEEEquantizevspace}{\@viiIEEEquantizevspace[\lineskiplimit]}} +\def\@viiIEEEquantizevspace[#1]{\edef\@IEEEquantizelineskiplimit{#1}\@ifnextchar [{\@viiiIEEEquantizevspace}{\@viiiIEEEquantizevspace[\lineskip]}} +\def\@viiiIEEEquantizevspace[#1]{\edef\@IEEEquantizelineskip{#1}\@ixIEEEquantizevspace} + +% main routine +\def\@ixIEEEquantizevspace#1#2#3{\relax +\edef\@IEEEquantizeunitheight{#1}\relax +\edef\@IEEEquantizenomvspace{#2}\relax +\edef\@IEEEquantizeminvspace{#3}\relax +% \@IEEEquantizeoutdimenreg +% \@IEEEquantizeobject +% \@IEEEquantizeobjectdecl +% \@IEEEquantizetopbaselineskip +% \@IEEEquantizeoffset +% \@IEEEquantizeprevdepth +% \@IEEEquantizelineskiplimit +% \@IEEEquantizelineskip +% \@IEEEquantizeunitheight +% \@IEEEquantizenomvspace +% \@IEEEquantizeminvspace +% get overall height of object +\setbox\@IEEEquantizeboxA\vbox{\begingroup\@IEEEquantizeobjectdecl\@IEEEquantizeobject\relax\endgroup}\relax +\@IEEEquantizeheightA\ht\@IEEEquantizeboxA\relax +% get height of first line of object +\setbox\@IEEEquantizeboxA\vtop{\begingroup\@IEEEquantizeobjectdecl\@IEEEquantizeobject\relax\endgroup}\relax +\@IEEEquantizeheightB\ht\@IEEEquantizeboxA\relax +\ifdim\@IEEEquantizeprevdepth>-1000pt\relax % prevdepth > -1000pf means full baselineskip\lineskip rules in effect +% lineskip spacing rule takes effect if height of top line > baselineskip - prevdepth - lineskiplimit, +% otherwise the baselineskip rule is in effect and the height of the first line does not matter at all. +\@IEEEquantizeheightC=\@IEEEquantizetopbaselineskip\relax +\advance\@IEEEquantizeheightC-\@IEEEquantizeprevdepth\relax +\advance\@IEEEquantizeheightC-\@IEEEquantizelineskiplimit\relax % this works even though \@IEEEquantizelineskiplimit is a macro because TeX allows --10pt notation +\ifdim\@IEEEquantizeheightB>\@IEEEquantizeheightC\relax +% lineskip spacing rule is in effect i.e., the object is going to be shifted down relative to the +% baselineskip set position by its top line height (already a part of the total height) + prevdepth + lineskip - baselineskip +\advance\@IEEEquantizeheightA\@IEEEquantizeprevdepth\relax +\advance\@IEEEquantizeheightA\@IEEEquantizelineskip\relax +\advance\@IEEEquantizeheightA-\@IEEEquantizetopbaselineskip\relax +\else +% height of first line <= \@IEEEquantizetopbaselineskip - \@IEEEquantizeprevdepth - \@IEEEquantizelineskiplimit +% standard baselineskip rules are in effect, so don't consider height of first line +\advance\@IEEEquantizeheightA-\@IEEEquantizeheightB\relax +\fi +% +\else % prevdepth <= -1000pt, simplier \topskip type rules in effect +\ifdim\@IEEEquantizeheightB>\@IEEEquantizetopbaselineskip +% height of top line (already included in the total height) in excess of +% baselineskip is the amount it will be downshifted +\advance\@IEEEquantizeheightA-\@IEEEquantizetopbaselineskip\relax +\else +% height of first line is irrelevant, remove it +\advance\@IEEEquantizeheightA-\@IEEEquantizeheightB\relax +\fi +\fi % prevdepth <= -1000pt +% +% adjust height for any manual offset +\advance\@IEEEquantizeheightA\@IEEEquantizeoffset\relax +% add in nominal spacer +\advance\@IEEEquantizeheightA\@IEEEquantizenomvspace\relax +% check for nonzero unitheight +\@IEEEquantizeheightB=\@IEEEquantizeunitheight\relax +\ifnum\@IEEEquantizeheightB=0\relax +\@IEEEclspkgerror{IEEEquantizevspace unit height cannot be zero. Assuming 10pt.}% +{Division by zero is not allowed.} +\@IEEEquantizeheightB=10pt\relax +\fi +% get integer number of lines +\@IEEEquantizemultiple=\@IEEEquantizeheightA\relax +\divide\@IEEEquantizemultiple\@IEEEquantizeheightB\relax +% set A to contain the excess height over the \@IEEEquantizemultiple of lines +% A = height - multiple*unitheight +\@IEEEquantizeheightC\@IEEEquantizeheightB\relax +\multiply\@IEEEquantizeheightC\@IEEEquantizemultiple\relax +\advance\@IEEEquantizeheightA-\@IEEEquantizeheightC\relax +% set B to contain the height short of \@IEEEquantizemultiple+1 of lines +% B = unitheight - A +\advance\@IEEEquantizeheightB-\@IEEEquantizeheightA\relax +% choose A or B based on which is closer +\@IEEEquantizeheightC\@IEEEquantizenomvspace\relax +\ifdim\@IEEEquantizeheightA<\@IEEEquantizeheightB\relax +% C = nomvspace - A, go with lower +\advance\@IEEEquantizeheightC-\@IEEEquantizeheightA\relax +\else +% C = nomvspace + B, go with upper +\advance\@IEEEquantizeheightC\@IEEEquantizeheightB\relax +\fi +% if violate lower bound, use next integer bound +\ifdim\@IEEEquantizeheightC<\@IEEEquantizeminvspace\relax +% A + B = unitheight +\advance\@IEEEquantizeheightC\@IEEEquantizeheightA\relax +\advance\@IEEEquantizeheightC\@IEEEquantizeheightB\relax +\fi +% export object and spacer outside of group +\global\let\@IEEEquantizeobjectout\@IEEEquantizeobject\relax +\global\@IEEEquantizeheightC\@IEEEquantizeheightC\relax +\endgroup +\if@IEEEquantizevspaceuseoutdimenreg +\@IEEEquantizeoutdimenreg=\@IEEEquantizeheightC\relax +\else +\@IEEEquantizeobjectout\relax +\vskip\@IEEEquantizeheightC\relax +\fi} + + +% user command to disable all global assignments, possible use within object decl +\def\IEEEquantizedisableglobal{\let\global\relax +\let\gdef\def +\let\xdef\edef} +% user command to allow for the disabling of \thanks and other commands, possible use within object decl +\def\IEEEquantizedisabletitlecmds{\long\def\thanks##1{\relax}\relax +\long\def\IEEEcompsocitemizethanks##1{\relax}\def\newpage{\relax}} + + + + + +% V1.6 +% we allow the user access to the last part of the title area +% useful in emergencies such as when a different spacing is needed +% This text is NOT compensated for in the dynamic sizer. +\let\@IEEEaftertitletext=\relax +\long\def\IEEEaftertitletext#1{\def\@IEEEaftertitletext{#1}} + + +% V1.7 provide a way for users to enter abstract and keywords +% into the onecolumn title are. This text is compensated for +% in the dynamic sizer. +\let\@IEEEtitleabstractindextext=\relax +\long\def\IEEEtitleabstractindextext#1{\def\@IEEEtitleabstractindextext{#1}} + +% V1.7 provide a way for users to get the \@IEEEtitleabstractindextext if +% not in compsoc or transmag journal mode - this way abstract and keywords +% can still be placed in their conventional position if not in those modes. +\def\IEEEdisplaynontitleabstractindextext{% +% display for all conference formats +\ifCLASSOPTIONconference\@IEEEtitleabstractindextext\relax +\else% non-conferences + % V1.8a display for all technotes + \ifCLASSOPTIONtechnote\@IEEEtitleabstractindextext\relax + % V1.8a add diamond line after abstract and index terms for compsoc technotes + \@IEEEcompsoconly{\noindent\hfill\IEEEcompsocdiamondline\hfill\hbox{}\par}\relax + \else % non-conferences and non-technotes + \ifCLASSOPTIONcompsoc% display if not compsoc and not transmag + \else + \ifCLASSOPTIONtransmag + \else% not compsoc journal nor transmag journal + \@IEEEtitleabstractindextext\relax + \fi + \fi + \fi +\fi} + + +% command to allow alteration of baselinestretch, but only if the current +% baselineskip is unity. Used to tweak the compsoc abstract and keywords line spacing. +\def\@IEEEtweakunitybaselinestretch#1{{\def\baselinestretch{1}\selectfont +\global\@tempskipa\baselineskip}\ifnum\@tempskipa=\baselineskip% +\def\baselinestretch{#1}\selectfont\fi\relax} + + +% abstract and keywords are in \small, except +% for 9pt docs in which they are in \footnotesize +% Because 9pt docs use an 8pt footnotesize, \small +% becomes a rather awkward 8.5pt +\def\@IEEEabskeysecsize{\small} +\ifx\CLASSOPTIONpt\@IEEEptsizenine + \def\@IEEEabskeysecsize{\footnotesize} +\fi + +% compsoc journals use \footnotesize, compsoc conferences use normalsize +\@IEEEcompsoconly{\def\@IEEEabskeysecsize{\footnotesize}} +\@IEEEcompsocconfonly{\def\@IEEEabskeysecsize{\small}} + + +% V1.6 have abstract and keywords strip leading spaces, pars and newlines +% so that spacing is more tightly controlled. +\def\abstract{\normalfont + \if@twocolumn + \@IEEEabskeysecsize\bfseries\textit{\abstractname}---\relax + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\vspace{-1.78ex}\@IEEEabskeysecsize\textbf{\abstractname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize + \fi\@IEEEgobbleleadPARNLSP} +% V1.6 The IEEE wants only 1 pica from end of abstract to introduction heading when in +% conference mode (the heading already has this much above it) +\def\endabstract{\relax\ifCLASSOPTIONconference\vspace{0ex}\else\vspace{1.34ex}\fi\par\if@twocolumn\else\endquotation\fi + \normalfont\normalsize} + +\def\IEEEkeywords{\normalfont + \if@twocolumn + \@IEEEabskeysecsize\bfseries\textit{\IEEEkeywordsname}---\relax + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\@IEEEabskeysecsize\textbf{\IEEEkeywordsname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize + \fi\@IEEEgobbleleadPARNLSP} +\def\endIEEEkeywords{\relax\ifCLASSOPTIONtechnote\vspace{1.34ex}\else\vspace{0.67ex}\fi + \par\if@twocolumn\else\endquotation\fi% + \normalfont\normalsize} + +% V1.7 compsoc keywords index terms +\ifCLASSOPTIONcompsoc + \ifCLASSOPTIONconference% compsoc conference +\def\abstract{\normalfont\@IEEEtweakunitybaselinestretch{1.15}\bfseries + \if@twocolumn + \@IEEEabskeysecsize\noindent\textit{\abstractname}---\relax + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\vspace{-1.78ex}\@IEEEabskeysecsize\textbf{\abstractname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize% + \fi\@IEEEgobbleleadPARNLSP} +\def\IEEEkeywords{\normalfont\@IEEEtweakunitybaselinestretch{1.15}\bfseries + \if@twocolumn + \@IEEEabskeysecsize\vskip 0.5\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip\noindent + \textit{\IEEEkeywordsname}---\relax + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\@IEEEabskeysecsize\textbf{\IEEEkeywordsname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize% + \fi\@IEEEgobbleleadPARNLSP} + \else% compsoc not conference +\def\abstract{\normalfont\@IEEEtweakunitybaselinestretch{1.15}\sffamily + \if@twocolumn + \@IEEEabskeysecsize\noindent\textbf{\abstractname}---\relax + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\vspace{-1.78ex}\@IEEEabskeysecsize\textbf{\abstractname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize% + \fi\@IEEEgobbleleadPARNLSP} +\def\IEEEkeywords{\normalfont\@IEEEtweakunitybaselinestretch{1.15}\sffamily + \if@twocolumn + \@IEEEabskeysecsize\vskip 0.5\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip\noindent + \textbf{\IEEEkeywordsname}---\relax + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\@IEEEabskeysecsize\textbf{\IEEEkeywordsname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize% + \fi\@IEEEgobbleleadPARNLSP} + \fi +\fi + +% V1.8 transmag keywords index terms +% no abstract name, use indentation +\ifCLASSOPTIONtransmag +\def\abstract{\normalfont\parindent 1em\relax + \if@twocolumn + \@IEEEabskeysecsize\bfseries\indent + \else + \bgroup\par\addvspace{0.5\baselineskip}\centering\vspace{-1.78ex}\@IEEEabskeysecsize + \textbf{\abstractname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize + \fi\@IEEEgobbleleadPARNLSP} + +\def\IEEEkeywords{\normalfont\parindent 1em\relax + \if@twocolumn + \@IEEEabskeysecsize\vspace{1\baselineskip}\bfseries\indent\textit{\IEEEkeywordsname}---\relax + \else + \bgroup\par\vspace{1\baselineskip}\centering\@IEEEabskeysecsize + \textbf{\IEEEkeywordsname}\par\addvspace{0.5\baselineskip}\egroup\quotation\@IEEEabskeysecsize + \fi\@IEEEgobbleleadPARNLSP} +\fi + + + +% gobbles all leading \, \\ and \par, upon finding first token that +% is not a \ , \\ or a \par, it ceases and returns that token +% +% used to strip leading \, \\ and \par from the input +% so that such things in the beginning of an environment will not +% affect the formatting of the text +\long\def\@IEEEgobbleleadPARNLSP#1{\let\@IEEEswallowthistoken=0% +\let\@IEEEgobbleleadPARNLSPtoken#1% +\let\@IEEEgobbleleadPARtoken=\par% +\let\@IEEEgobbleleadNLtoken=\\% +\let\@IEEEgobbleleadSPtoken=\ % +\def\@IEEEgobbleleadSPMACRO{\ }% +\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadPARtoken% +\let\@IEEEswallowthistoken=1% +\fi% +\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadNLtoken% +\let\@IEEEswallowthistoken=1% +\fi% +\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadSPtoken% +\let\@IEEEswallowthistoken=1% +\fi% +% a control space will come in as a macro +% when it is the last one on a line +\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadSPMACRO% +\let\@IEEEswallowthistoken=1% +\fi% +% if we have to swallow this token, do so and taste the next one +% else spit it out and stop gobbling +\ifx\@IEEEswallowthistoken 1\let\@IEEEnextgobbleleadPARNLSP=\@IEEEgobbleleadPARNLSP\else% +\let\@IEEEnextgobbleleadPARNLSP=#1\fi% +\@IEEEnextgobbleleadPARNLSP}% + + + + +% TITLING OF SECTIONS +\def\@IEEEsectpunct{:\ \,} % Punctuation after run-in section heading (headings which are + % part of the paragraphs), need little bit more than a single space + % spacing from section number to title +% compsoc conferences use regular period/space punctuation +\ifCLASSOPTIONcompsoc +\ifCLASSOPTIONconference +\def\@IEEEsectpunct{.\ } +\fi\fi + + +\def\@seccntformat#1{\csname the#1dis\endcsname\hskip 0.5em\relax} + +\ifCLASSOPTIONcompsoc +% compsoc journals need extra spacing +\ifCLASSOPTIONconference\else +\def\@seccntformat#1{\csname the#1dis\endcsname\hskip 1em\relax} +\fi\fi + +%v1.7 put {} after #6 to allow for some types of user font control +%and use \@@par rather than \par +\def\@sect#1#2#3#4#5#6[#7]#8{% + \ifnum #2>\c@secnumdepth + \let\@svsec\@empty + \else + \refstepcounter{#1}% + % load section label and spacer into \@svsec + \protected@edef\@svsec{\@seccntformat{#1}\relax}% + \fi% + \@tempskipa #5\relax + \ifdim \@tempskipa>\z@% tempskipa determines whether is treated as a high + \begingroup #6{\relax% or low level heading + \noindent % subsections are NOT indented + % print top level headings. \@svsec is label, #8 is heading title + % The IEEE does not block indent the section title text, it flows like normal + {\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\@@par}}% + \endgroup + \addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\relax\else + \protect\numberline{\csname the#1\endcsname}\fi#7}% + \else % printout low level headings + % svsechd seems to swallow the trailing space, protect it with \mbox{} + % got rid of sectionmark stuff + \def\@svsechd{#6{\hskip #3\relax\@svsec #8\@IEEEsectpunct\mbox{}}% + \addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\relax\else + \protect\numberline{\csname the#1\endcsname}\fi#7}}% + \fi%skip down + \@xsect{#5}} + + +% section* handler +%v1.7 put {} after #4 to allow for some types of user font control +%and use \@@par rather than \par +\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax + \ifdim \@tempskipa>\z@ + %\begingroup #4\@hangfrom{\hskip #1}{\interlinepenalty \@M #5\par}\endgroup + % The IEEE does not block indent the section title text, it flows like normal + \begingroup \noindent #4{\relax{\hskip #1}{\interlinepenalty \@M #5\@@par}}\endgroup + % svsechd swallows the trailing space, protect it with \mbox{} + \else \def\@svsechd{#4{\hskip #1\relax #5\@IEEEsectpunct\mbox{}}}\fi + \@xsect{#3}} + + +%% SECTION heading spacing and font +%% +% arguments are: #1 - sectiontype name +% (for \@sect) #2 - section level +% #3 - section heading indent +% #4 - top separation (absolute value used, neg indicates not to indent main text) +% If negative, make stretch parts negative too! +% #5 - (absolute value used) positive: bottom separation after heading, +% negative: amount to indent main text after heading +% Both #4 and #5 negative means to indent main text and use negative top separation +% #6 - font control +% You've got to have \normalfont\normalsize in the font specs below to prevent +% trouble when you do something like: +% \section{Note}{\ttfamily TT-TEXT} is known to ... +% The IEEE sometimes REALLY stretches the area before a section +% heading by up to about 0.5in. However, it may not be a good +% idea to let LaTeX have quite this much rubber. +\ifCLASSOPTIONconference% +% The IEEE wants section heading spacing to decrease for conference mode +\def\section{\@startsection{section}{1}{\z@}{1.5ex plus 1.5ex minus 0.5ex}% +{0.7ex plus 1ex minus 0ex}{\normalfont\normalsize\centering\scshape}}% +\def\subsection{\@startsection{subsection}{2}{\z@}{1.5ex plus 1.5ex minus 0.5ex}% +{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}% +\else % for journals +\def\section{\@startsection{section}{1}{\z@}{3.0ex plus 1.5ex minus 1.5ex}% V1.6 3.0ex from 3.5ex +{0.7ex plus 1ex minus 0ex}{\normalfont\normalsize\centering\scshape}}% +\def\subsection{\@startsection{subsection}{2}{\z@}{3.5ex plus 1.5ex minus 1.5ex}% +{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}% +\fi + +% for both journals and conferences +% decided to put in a little rubber above the section, might help somebody +\def\subsubsection{\@startsection{subsubsection}{3}{\parindent}{0ex plus 0.1ex minus 0.1ex}% +{0ex}{\normalfont\normalsize\itshape}}% +\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{0ex plus 0.1ex minus 0.1ex}% +{0ex}{\normalfont\normalsize\itshape}}% + + +% compsoc +\ifCLASSOPTIONcompsoc +\ifCLASSOPTIONconference +% compsoc conference +\def\section{\@startsection{section}{1}{\z@}{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}% +{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}{\normalfont\large\bfseries}}% +\def\subsection{\@startsection{subsection}{2}{\z@}{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}% +{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}{\normalfont\sublargesize\bfseries}}% +\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}% +{0ex}{\normalfont\normalsize\bfseries}}% +\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{0ex plus 0.1ex minus 0.1ex}% +{0ex}{\normalfont\normalsize}}% +\else% compsoc journals +% use negative top separation as compsoc journals do not indent paragraphs after section titles +\def\section{\@startsection{section}{1}{\z@}{-3.5ex plus -2ex minus -1.5ex}% +{0.7ex plus 1ex minus 0ex}{\normalfont\sublargesize\sffamily\bfseries\scshape}}% +% Note that subsection and smaller may not be correct for the Computer Society, +% I have to look up an example. +\def\subsection{\@startsection{subsection}{2}{\z@}{-3.5ex plus -1.5ex minus -1.5ex}% +{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\sffamily\bfseries}}% +\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-2.5ex plus -1ex minus -1ex}% +{0.5ex plus 0.5ex minus 0ex}{\normalfont\normalsize\sffamily\itshape}}% +\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{-0ex plus -0.1ex minus -0.1ex}% +{0ex}{\normalfont\normalsize}}% +\fi\fi + +% transmag +\ifCLASSOPTIONtransmag +\def\subsection{\@startsection{subsection}{2}{0.75\parindent}{3.5ex plus 1.5ex minus 1.5ex}% +{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}% +\def\subsubsection{\@startsection{subsubsection}{3}{1.25\parindent}{0.1ex plus 0.1ex minus 0.1ex}% +{0.1ex}{\normalfont\normalsize\itshape}}% +\fi + + +% V1.8a provide for a raised line Introduction section for use with Computer +% Society papers. We have to remove any spacing glue after the section +% heading and then remove the blank line for the new paragraph after it. +% LaTeX's section handler alters \everypar and we need to propogate those +% changes outside of the \parbox lest there be spacing problems at the top +% of the next section. +\def\IEEEraisesectionheading#1{\noindent\raisebox{1.5\baselineskip}[0pt][0pt]{\parbox[b]{\columnwidth}{#1\unskip\global\everypar=\everypar}}\vspace{-1\baselineskip}\vspace{-\parskip}\par} + + + +%% ENVIRONMENTS +% "box" symbols at end of proofs +\def\IEEEQEDclosed{\mbox{\rule[0pt]{1.3ex}{1.3ex}}} % for a filled box +% V1.6 some journals use an open box instead that will just fit around a closed one +\def\IEEEQEDopen{{\setlength{\fboxsep}{0pt}\setlength{\fboxrule}{0.2pt}\fbox{\rule[0pt]{0pt}{1.3ex}\rule[0pt]{1.3ex}{0pt}}}} +\ifCLASSOPTIONcompsoc +\def\IEEEQED{\IEEEQEDopen} % default to open for compsoc +\else +\def\IEEEQED{\IEEEQEDclosed} % otherwise default to closed +\fi + +%V1.8 flag to indicate if QED symbol is to be shown +\newif\if@IEEEQEDshow \@IEEEQEDshowtrue +\def\IEEEproofindentspace{2\parindent}% V1.8 allow user to change indentation amount if desired +% v1.7 name change to avoid namespace collision with amsthm. Also add support +% for an optional argument. +\def\IEEEproof{\@ifnextchar[{\@IEEEproof}{\@IEEEproof[\IEEEproofname]}} +\def\@IEEEproof[#1]{\@IEEEQEDshowtrue\par\noindent\hspace{\IEEEproofindentspace}{\itshape #1: }} +\def\endIEEEproof{\if@IEEEQEDshow\hspace*{\fill}\nobreakspace\IEEEQED\fi\par} +% qedhere for equation environments, similar to AMS \qedhere +\def\IEEEQEDhereeqn{\global\@IEEEQEDshowfalse\eqno\let\eqno\relax\let\leqno\relax + \let\veqno\relax\hbox{\IEEEQED}} +% IEEE style qedhere for IEEEeqnarray and other environments +\def\IEEEQEDhere{\global\@IEEEQEDshowfalse\IEEEQED} +% command to disable QED at end of IEEEproof +\def\IEEEQEDoff{\global\@IEEEQEDshowfalse} + + +%\itemindent is set to \z@ by list, so define new temporary variable +\newdimen\@IEEEtmpitemindent + +\ifCLASSOPTIONcompsoc +% V1.8a compsoc uses bold theorem titles, a period instead of a colon, vertical spacing, and hanging indentation +% V1.8 allow long theorem names to break across lines. +% Thanks to Miquel Payaro for reporting this. +\def\@begintheorem#1#2{\@IEEEtmpitemindent\itemindent\relax + \topsep 0.2\@IEEEnormalsizeunitybaselineskip plus 0.26\@IEEEnormalsizeunitybaselineskip minus 0.05\@IEEEnormalsizeunitybaselineskip + \rmfamily\trivlist\hangindent\parindent% + \item[]\textit{\bfseries\noindent #1\ #2.} \itemindent\@IEEEtmpitemindent\relax} +\def\@opargbegintheorem#1#2#3{\@IEEEtmpitemindent\itemindent\relax +\topsep 0.2\@IEEEnormalsizeunitybaselineskip plus 0.26\@IEEEnormalsizeunitybaselineskip minus 0.05\@IEEEnormalsizeunitybaselineskip +\rmfamily\trivlist\hangindent\parindent% +% V1.6 The IEEE is back to using () around theorem names which are also in italics +% Thanks to Christian Peel for reporting this. + \item[]\textit{\bfseries\noindent #1\ #2\ (#3).} \itemindent\@IEEEtmpitemindent\relax} +% V1.7 remove bogus \unskip that caused equations in theorems to collide with +% lines below. +\def\@endtheorem{\endtrivlist\vskip 0.25\@IEEEnormalsizeunitybaselineskip plus 0.26\@IEEEnormalsizeunitybaselineskip minus 0.05\@IEEEnormalsizeunitybaselineskip} +\else +% +% noncompsoc +% +% V1.8 allow long theorem names to break across lines. +% Thanks to Miquel Payaro for reporting this. +\def\@begintheorem#1#2{\@IEEEtmpitemindent\itemindent\relax\topsep 0pt\rmfamily\trivlist% + \item[]\textit{\indent #1\ #2:} \itemindent\@IEEEtmpitemindent\relax} +\def\@opargbegintheorem#1#2#3{\@IEEEtmpitemindent\itemindent\relax\topsep 0pt\rmfamily \trivlist% +% V1.6 The IEEE is back to using () around theorem names which are also in italics +% Thanks to Christian Peel for reporting this. + \item[]\textit{\indent #1\ #2\ (#3):} \itemindent\@IEEEtmpitemindent\relax} +% V1.7 remove bogus \unskip that caused equations in theorems to collide with +% lines below. +\def\@endtheorem{\endtrivlist} +\fi + + + +% V1.6 +% display command for the section the theorem is in - so that \thesection +% is not used as this will be in Roman numerals when we want arabic. +% LaTeX2e uses \def\@thmcounter#1{\noexpand\arabic{#1}} for the theorem number +% (second part) display and \def\@thmcountersep{.} as a separator. +% V1.7 intercept calls to the section counter and reroute to \@IEEEthmcounterinsection +% to allow \appendix(ices} to override as needed. +% +% special handler for sections, allows appendix(ices) to override +\gdef\@IEEEthmcounterinsection#1{\arabic{#1}} +% string macro +\edef\@IEEEstringsection{section} + +% redefine the #1#2[#3] form of newtheorem to use a hook to \@IEEEthmcounterinsection +% if section in_counter is used +\def\@xnthm#1#2[#3]{% + \expandafter\@ifdefinable\csname #1\endcsname + {\@definecounter{#1}\@newctr{#1}[#3]% + \edef\@IEEEstringtmp{#3} + \ifx\@IEEEstringtmp\@IEEEstringsection + \expandafter\xdef\csname the#1\endcsname{% + \noexpand\@IEEEthmcounterinsection{#3}\@thmcountersep + \@thmcounter{#1}}% + \else + \expandafter\xdef\csname the#1\endcsname{% + \expandafter\noexpand\csname the#3\endcsname \@thmcountersep + \@thmcounter{#1}}% + \fi + \global\@namedef{#1}{\@thm{#1}{#2}}% + \global\@namedef{end#1}{\@endtheorem}}} + + + +%% SET UP THE DEFAULT PAGESTYLE +\pagestyle{headings} +\pagenumbering{arabic} + +% normally the page counter starts at 1 +\setcounter{page}{1} +% however, for peerreview the cover sheet is page 0 or page -1 +% (for duplex printing) +\ifCLASSOPTIONpeerreview + \if@twoside + \setcounter{page}{-1} + \else + \setcounter{page}{0} + \fi +\fi + +% standard book class behavior - let bottom line float up and down as +% needed when single sided +\ifCLASSOPTIONtwoside\else\raggedbottom\fi +% if two column - turn on twocolumn, allow word spacings to stretch more and +% enforce a rigid position for the last lines +\ifCLASSOPTIONtwocolumn +% the peer review option delays invoking twocolumn + \ifCLASSOPTIONpeerreview\else + \twocolumn + \fi +\sloppy +\flushbottom +\fi + + + + +% \APPENDIX and \APPENDICES definitions + +% This is the \@ifmtarg command from the LaTeX ifmtarg package +% by Peter Wilson (CUA) and Donald Arseneau +% \@ifmtarg is used to determine if an argument to a command +% is present or not. +% For instance: +% \@ifmtarg{#1}{\typeout{empty}}{\typeout{has something}} +% \@ifmtarg is used with our redefined \section command if +% \appendices is invoked. +% The command \section will behave slightly differently depending +% on whether the user specifies a title: +% \section{My appendix title} +% or not: +% \section{} +% This way, we can eliminate the blank lines where the title +% would be, and the unneeded : after Appendix in the table of +% contents +\begingroup +\catcode`\Q=3 +\long\gdef\@ifmtarg#1{\@xifmtarg#1QQ\@secondoftwo\@firstoftwo\@nil} +\long\gdef\@xifmtarg#1#2Q#3#4#5\@nil{#4} +\endgroup +% end of \@ifmtarg defs + + +% V1.7 +% command that allows the one time saving of the original definition +% of section to \@IEEEappendixsavesection for \appendix or \appendices +% we don't save \section here as it may be redefined later by other +% packages (hyperref.sty, etc.) +\def\@IEEEsaveoriginalsectiononce{\let\@IEEEappendixsavesection\section +\let\@IEEEsaveoriginalsectiononce\relax} + +% neat trick to grab and process the argument from \section{argument} +% we process differently if the user invoked \section{} with no +% argument (title) +% note we reroute the call to the old \section* +\def\@IEEEprocessthesectionargument#1{% +\@ifmtarg{#1}{% +\@IEEEappendixsavesection*{\appendixname\nobreakspace\thesectiondis}% +\addcontentsline{toc}{section}{\appendixname\nobreakspace\thesection}}{% +\@IEEEappendixsavesection*{\appendixname\nobreakspace\thesectiondis\\* #1}% +\addcontentsline{toc}{section}{\appendixname\nobreakspace\thesection: #1}}} + +% we use this if the user calls \section{} after +% \appendix-- which has no meaning. So, we ignore the +% command and its argument. Then, warn the user. +\def\@IEEEdestroythesectionargument#1{\typeout{** WARNING: Ignoring useless +\protect\section\space in Appendix (line \the\inputlineno).}} + + +% remember \thesection forms will be displayed in \ref calls +% and in the Table of Contents. +% The \sectiondis form is used in the actual heading itself + +% appendix command for one single appendix +% normally has no heading. However, if you want a +% heading, you can do so via the optional argument: +% \appendix[Optional Heading] +\def\appendix{\relax} +\renewcommand{\appendix}[1][]{\@IEEEsaveoriginalsectiononce\par + % v1.6 keep hyperref's identifiers unique + \gdef\theHsection{Appendix.A}% + % v1.6 adjust hyperref's string name for the section + \xdef\Hy@chapapp{appendix}% + \setcounter{section}{0}% + \setcounter{subsection}{0}% + \setcounter{subsubsection}{0}% + \setcounter{paragraph}{0}% + \gdef\thesection{A}% + \gdef\thesectiondis{}% + \gdef\thesubsection{\Alph{subsection}}% + \gdef\@IEEEthmcounterinsection##1{A} + \refstepcounter{section}% update the \ref counter + \@ifmtarg{#1}{\@IEEEappendixsavesection*{\appendixname}% + \addcontentsline{toc}{section}{\appendixname}}{% + \@IEEEappendixsavesection*{\appendixname\nobreakspace\\* #1}% + \addcontentsline{toc}{section}{\appendixname: #1}}% + % redefine \section command for appendix + % leave \section* as is + \def\section{\@ifstar{\@IEEEappendixsavesection*}{% + \@IEEEdestroythesectionargument}}% throw out the argument + % of the normal form +} + + + +% appendices command for multiple appendices +% user then calls \section with an argument (possibly empty) to +% declare the individual appendices +\def\appendices{\@IEEEsaveoriginalsectiononce\par + % v1.6 keep hyperref's identifiers unique + \gdef\theHsection{Appendix.\Alph{section}}% + % v1.6 adjust hyperref's string name for the section + \xdef\Hy@chapapp{appendix}% + \setcounter{section}{-1}% we want \refstepcounter to use section 0 + \setcounter{subsection}{0}% + \setcounter{subsubsection}{0}% + \setcounter{paragraph}{0}% + \ifCLASSOPTIONromanappendices% + \gdef\thesection{\Roman{section}}% + \gdef\thesectiondis{\Roman{section}}% + \@IEEEcompsocconfonly{\gdef\thesectiondis{\Roman{section}.}}% + \gdef\@IEEEthmcounterinsection##1{A\arabic{##1}} + \else% + \gdef\thesection{\Alph{section}}% + \gdef\thesectiondis{\Alph{section}}% + \@IEEEcompsocconfonly{\gdef\thesectiondis{\Alph{section}.}}% + \gdef\@IEEEthmcounterinsection##1{\Alph{##1}} + \fi% + \refstepcounter{section}% update the \ref counter + \setcounter{section}{0}% NEXT \section will be the FIRST appendix + % redefine \section command for appendices + % leave \section* as is + \def\section{\@ifstar{\@IEEEappendixsavesection*}{% process the *-form + \refstepcounter{section}% or is a new section so, + \@IEEEprocessthesectionargument}}% process the argument + % of the normal form +} + + + +% V1.7 compoc uses nonbold drop cap and small caps word style +\ifCLASSOPTIONcompsoc + \def\IEEEPARstartFONTSTYLE{\mdseries} + \def\IEEEPARstartWORDFONTSTYLE{\scshape} + \def\IEEEPARstartWORDCAPSTYLE{\relax} +\fi +% +% +% \IEEEPARstart +% Definition for the big two line drop cap letter at the beginning of the +% first paragraph of journal papers. The first argument is the first letter +% of the first word, the second argument is the remaining letters of the +% first word which will be rendered in upper case. +% In V1.6 this has been completely rewritten to: +% +% 1. no longer have problems when the user begins an environment +% within the paragraph that uses \IEEEPARstart. +% 2. auto-detect and use the current font family +% 3. revise handling of the space at the end of the first word so that +% interword glue will now work as normal. +% 4. produce correctly aligned edges for the (two) indented lines. +% +% We generalize things via control macros - playing with these is fun too. +% +% V1.7 added more control macros to make it easy for IEEEtrantools.sty users +% to change the font style. +% +% the number of lines that are indented to clear it +% may need to increase if using decenders +\providecommand{\IEEEPARstartDROPLINES}{2} +% minimum number of lines left on a page to allow a \@IEEEPARstart +% Does not take into consideration rubber shrink, so it tends to +% be overly cautious +\providecommand{\IEEEPARstartMINPAGELINES}{2} +% V1.7 the height of the drop cap is adjusted to match the height of this text +% in the current font (when \IEEEPARstart is called). +\providecommand{\IEEEPARstartHEIGHTTEXT}{T} +% the depth the letter is lowered below the baseline +% the height (and size) of the letter is determined by the sum +% of this value and the height of the \IEEEPARstartHEIGHTTEXT in the current +% font. It is a good idea to set this value in terms of the baselineskip +% so that it can respond to changes therein. +\providecommand{\IEEEPARstartDROPDEPTH}{1.1\baselineskip} +% V1.7 the font the drop cap will be rendered in, +% can take zero or one argument. +\providecommand{\IEEEPARstartFONTSTYLE}{\bfseries} +% V1.7 any additional, non-font related commands needed to modify +% the drop cap letter, can take zero or one argument. +\providecommand{\IEEEPARstartCAPSTYLE}{\MakeUppercase} +% V1.7 the font that will be used to render the rest of the word, +% can take zero or one argument. +\providecommand{\IEEEPARstartWORDFONTSTYLE}{\relax} +% V1.7 any additional, non-font related commands needed to modify +% the rest of the word, can take zero or one argument. +\providecommand{\IEEEPARstartWORDCAPSTYLE}{\MakeUppercase} +% This is the horizontal separation distance from the drop letter to the main text. +% Lengths that depend on the font (e.g., ex, em, etc.) will be referenced +% to the font that is active when \IEEEPARstart is called. +\providecommand{\IEEEPARstartSEP}{0.15em} +% V1.7 horizontal offset applied to the left of the drop cap. +\providecommand{\IEEEPARstartHOFFSET}{0em} +% V1.7 Italic correction command applied at the end of the drop cap. +\providecommand{\IEEEPARstartITLCORRECT}{\/} + +% width of the letter output, set globally. Can be used in \IEEEPARstartSEP +% or \IEEEPARstartHOFFSET, but not the height lengths. +\newdimen\IEEEPARstartletwidth +\IEEEPARstartletwidth 0pt\relax + +% definition of \IEEEPARstart +% THIS IS A CONTROLLED SPACING AREA, DO NOT ALLOW SPACES WITHIN THESE LINES +% +% The token \@IEEEPARstartfont will be globally defined after the first use +% of \IEEEPARstart and will be a font command which creates the big letter +% The first argument is the first letter of the first word and the second +% argument is the rest of the first word(s). +\def\IEEEPARstart#1#2{\par{% +% if this page does not have enough space, break it and lets start +% on a new one +\@IEEEtranneedspace{\IEEEPARstartMINPAGELINES\baselineskip}{\relax}% +% V1.7 move this up here in case user uses \textbf for \IEEEPARstartFONTSTYLE +% which uses command \leavevmode which causes an unwanted \indent to be issued +\noindent +% calculate the desired height of the big letter +% it extends from the top of \IEEEPARstartHEIGHTTEXT in the current font +% down to \IEEEPARstartDROPDEPTH below the current baseline +\settoheight{\@IEEEtrantmpdimenA}{\IEEEPARstartHEIGHTTEXT}% +\addtolength{\@IEEEtrantmpdimenA}{\IEEEPARstartDROPDEPTH}% +% extract the name of the current font in bold +% and place it in \@IEEEPARstartFONTNAME +\def\@IEEEPARstartGETFIRSTWORD##1 ##2\relax{##1}% +{\IEEEPARstartFONTSTYLE{\selectfont\edef\@IEEEPARstartFONTNAMESPACE{\fontname\font\space}% +\xdef\@IEEEPARstartFONTNAME{\expandafter\@IEEEPARstartGETFIRSTWORD\@IEEEPARstartFONTNAMESPACE\relax}}}% +% define a font based on this name with a point size equal to the desired +% height of the drop letter +\font\@IEEEPARstartsubfont\@IEEEPARstartFONTNAME\space at \@IEEEtrantmpdimenA\relax% +% save this value as a counter (integer) value (sp points) +\@IEEEtrantmpcountA=\@IEEEtrantmpdimenA% +% now get the height of the actual letter produced by this font size +\settoheight{\@IEEEtrantmpdimenB}{\@IEEEPARstartsubfont\IEEEPARstartCAPSTYLE{#1}}% +% If something bogus happens like the first argument is empty or the +% current font is strange, do not allow a zero height. +\ifdim\@IEEEtrantmpdimenB=0pt\relax% +\typeout{** WARNING: IEEEPARstart drop letter has zero height! (line \the\inputlineno)}% +\typeout{ Forcing the drop letter font size to 10pt.}% +\@IEEEtrantmpdimenB=10pt% +\fi% +% and store it as a counter +\@IEEEtrantmpcountB=\@IEEEtrantmpdimenB% +% Since a font size doesn't exactly correspond to the height of the capital +% letters in that font, the actual height of the letter, \@IEEEtrantmpcountB, +% will be less than that desired, \@IEEEtrantmpcountA +% we need to raise the font size, \@IEEEtrantmpdimenA +% by \@IEEEtrantmpcountA / \@IEEEtrantmpcountB +% But, TeX doesn't have floating point division, so we have to use integer +% division. Hence the use of the counters. +% We need to reduce the denominator so that the loss of the remainder will +% have minimal affect on the accuracy of the result +\divide\@IEEEtrantmpcountB by 200% +\divide\@IEEEtrantmpcountA by \@IEEEtrantmpcountB% +% Then reequalize things when we use TeX's ability to multiply by +% floating point values +\@IEEEtrantmpdimenB=0.005\@IEEEtrantmpdimenA% +\multiply\@IEEEtrantmpdimenB by \@IEEEtrantmpcountA% +% \@IEEEPARstartfont is globaly set to the calculated font of the big letter +% We need to carry this out of the local calculation area to to create the +% big letter. +\global\font\@IEEEPARstartfont\@IEEEPARstartFONTNAME\space at \@IEEEtrantmpdimenB% +% Now set \@IEEEtrantmpdimenA to the width of the big letter +% We need to carry this out of the local calculation area to set the +% hanging indent +\settowidth{\global\@IEEEtrantmpdimenA}{\@IEEEPARstartfont +\IEEEPARstartCAPSTYLE{#1\IEEEPARstartITLCORRECT}}}% +% end of the isolated calculation environment +\global\IEEEPARstartletwidth\@IEEEtrantmpdimenA\relax% +% add in the extra clearance we want +\advance\@IEEEtrantmpdimenA by \IEEEPARstartSEP\relax% +% add in the optional offset +\advance\@IEEEtrantmpdimenA by \IEEEPARstartHOFFSET\relax% +% V1.7 don't allow negative offsets to produce negative hanging indents +\@IEEEtrantmpdimenB\@IEEEtrantmpdimenA +\ifnum\@IEEEtrantmpdimenB < 0 \@IEEEtrantmpdimenB 0pt\fi +% \@IEEEtrantmpdimenA has the width of the big letter plus the +% separation space and \@IEEEPARstartfont is the font we need to use +% Now, we make the letter and issue the hanging indent command +% The letter is placed in a box of zero width and height so that other +% text won't be displaced by it. +\hangindent\@IEEEtrantmpdimenB\hangafter=-\IEEEPARstartDROPLINES% +\makebox[0pt][l]{\hspace{-\@IEEEtrantmpdimenA}% +\raisebox{-\IEEEPARstartDROPDEPTH}[0pt][0pt]{\hspace{\IEEEPARstartHOFFSET}% +\@IEEEPARstartfont\IEEEPARstartCAPSTYLE{#1\IEEEPARstartITLCORRECT}% +\hspace{\IEEEPARstartSEP}}}% +{\IEEEPARstartWORDFONTSTYLE{\IEEEPARstartWORDCAPSTYLE{\selectfont#2}}}} + + + + +% determines if the space remaining on a given page is equal to or greater +% than the specified space of argument one +% if not, execute argument two (only if the remaining space is greater than zero) +% and issue a \newpage +% +% example: \@IEEEtranneedspace{2in}{\vfill} +% +% Does not take into consideration rubber shrinkage, so it tends to +% be overly cautious +% Based on an example posted by Donald Arseneau +% Note this macro uses \@IEEEtrantmpdimenB internally for calculations, +% so DO NOT PASS \@IEEEtrantmpdimenB to this routine +% if you need a dimen register, import with \@IEEEtrantmpdimenA instead +\def\@IEEEtranneedspace#1#2{\penalty-100\begingroup%shield temp variable +\@IEEEtrantmpdimenB\pagegoal\advance\@IEEEtrantmpdimenB-\pagetotal% space left +\ifdim #1>\@IEEEtrantmpdimenB\relax% not enough space left +\ifdim\@IEEEtrantmpdimenB>\z@\relax #2\fi% +\newpage% +\fi\endgroup} + + + +% IEEEbiography ENVIRONMENT +% Allows user to enter biography leaving place for picture (adapts to font size) +% As of V1.5, a new optional argument allows you to have a real graphic! +% V1.5 and later also fixes the "colliding biographies" which could happen when a +% biography's text was shorter than the space for the photo. +% MDS 7/2001 +% V1.6 prevent multiple biographies from making multiple TOC entries +\newif\if@IEEEbiographyTOCentrynotmade +\global\@IEEEbiographyTOCentrynotmadetrue + +% biography counter so hyperref can jump directly to the biographies +% and not just the previous section +\newcounter{IEEEbiography} +\setcounter{IEEEbiography}{0} + +% photo area size +\def\@IEEEBIOphotowidth{1.0in} % width of the biography photo area +\def\@IEEEBIOphotodepth{1.25in} % depth (height) of the biography photo area +% area cleared for photo +\def\@IEEEBIOhangwidth{1.14in} % width cleared for the biography photo area +\def\@IEEEBIOhangdepth{1.25in} % depth cleared for the biography photo area + % actual depth will be a multiple of + % \baselineskip, rounded up +\def\@IEEEBIOskipN{4\baselineskip}% nominal value of the vskip above the biography + +\newenvironment{IEEEbiography}[2][]{\normalfont\@IEEEcompsoconly{\sffamily}\footnotesize% +\unitlength 1in\parskip=0pt\par\parindent 1em\interlinepenalty500% +% we need enough space to support the hanging indent +% the nominal value of the spacer +% and one extra line for good measure +\@IEEEtrantmpdimenA=\@IEEEBIOhangdepth% +\advance\@IEEEtrantmpdimenA by \@IEEEBIOskipN% +\advance\@IEEEtrantmpdimenA by 1\baselineskip% +% if this page does not have enough space, break it and lets start +% with a new one +\@IEEEtranneedspace{\@IEEEtrantmpdimenA}{\relax}% +% nominal spacer can strech, not shrink use 1fil so user can out stretch with \vfill +\vskip \@IEEEBIOskipN plus 1fil minus 0\baselineskip% +% the default box for where the photo goes +\def\@IEEEtempbiographybox{{\setlength{\fboxsep}{0pt}\framebox{% +\begin{minipage}[b][\@IEEEBIOphotodepth][c]{\@IEEEBIOphotowidth}\centering PLACE\\ PHOTO\\ HERE \end{minipage}}}}% +% +% detect if the optional argument was supplied, this requires the +% \@ifmtarg command as defined in the appendix section above +% and if so, override the default box with what they want +\@ifmtarg{#1}{\relax}{\def\@IEEEtempbiographybox{\mbox{\begin{minipage}[b][\@IEEEBIOphotodepth][c]{\@IEEEBIOphotowidth}% +\centering% +#1% +\end{minipage}}}}% end if optional argument supplied +% Make an entry into the table of contents only if we have not done so before +\if@IEEEbiographyTOCentrynotmade% +% link labels to the biography counter so hyperref will jump +% to the biography, not the previous section +\setcounter{IEEEbiography}{-1}% +\refstepcounter{IEEEbiography}% +\addcontentsline{toc}{section}{Biographies}% +\global\@IEEEbiographyTOCentrynotmadefalse% +\fi% +% one more biography +\refstepcounter{IEEEbiography}% +% Make an entry for this name into the table of contents +\addcontentsline{toc}{subsection}{#2}% +% V1.6 properly handle if a new paragraph should occur while the +% hanging indent is still active. Do this by redefining \par so +% that it will not start a new paragraph. (But it will appear to the +% user as if it did.) Also, strip any leading pars, newlines, or spaces. +\let\@IEEEBIOORGparCMD=\par% save the original \par command +\edef\par{\hfil\break\indent}% the new \par will not be a "real" \par +\settoheight{\@IEEEtrantmpdimenA}{\@IEEEtempbiographybox}% get height of biography box +\@IEEEtrantmpdimenB=\@IEEEBIOhangdepth% +\@IEEEtrantmpcountA=\@IEEEtrantmpdimenB% countA has the hang depth +\divide\@IEEEtrantmpcountA by \baselineskip% calculates lines needed to produce the hang depth +\advance\@IEEEtrantmpcountA by 1% ensure we overestimate +% set the hanging indent +\hangindent\@IEEEBIOhangwidth% +\hangafter-\@IEEEtrantmpcountA% +% reference the top of the photo area to the top of a capital T +\settoheight{\@IEEEtrantmpdimenB}{\mbox{T}}% +% set the photo box, give it zero width and height so as not to disturb anything +\noindent\makebox[0pt][l]{\hspace{-\@IEEEBIOhangwidth}\raisebox{\@IEEEtrantmpdimenB}[0pt][0pt]{% +\raisebox{-\@IEEEBIOphotodepth}[0pt][0pt]{\@IEEEtempbiographybox}}}% +% now place the author name and begin the bio text +\noindent\textbf{#2\ }\@IEEEgobbleleadPARNLSP}{\relax\let\par=\@IEEEBIOORGparCMD\par% +% 7/2001 V1.5 detect when the biography text is shorter than the photo area +% and pad the unused area - preventing a collision from the next biography entry +% MDS +\ifnum \prevgraf <\@IEEEtrantmpcountA\relax% detect when the biography text is shorter than the photo + \advance\@IEEEtrantmpcountA by -\prevgraf% calculate how many lines we need to pad + \advance\@IEEEtrantmpcountA by -1\relax% we compensate for the fact that we indented an extra line + \@IEEEtrantmpdimenA=\baselineskip% calculate the length of the padding + \multiply\@IEEEtrantmpdimenA by \@IEEEtrantmpcountA% + \noindent\rule{0pt}{\@IEEEtrantmpdimenA}% insert an invisible support strut +\fi% +\par\normalfont} + + + +% V1.6 +% added biography without a photo environment +\newenvironment{IEEEbiographynophoto}[1]{% +% Make an entry into the table of contents only if we have not done so before +\if@IEEEbiographyTOCentrynotmade% +% link labels to the biography counter so hyperref will jump +% to the biography, not the previous section +\setcounter{IEEEbiography}{-1}% +\refstepcounter{IEEEbiography}% +\addcontentsline{toc}{section}{Biographies}% +\global\@IEEEbiographyTOCentrynotmadefalse% +\fi% +% one more biography +\refstepcounter{IEEEbiography}% +% Make an entry for this name into the table of contents +\addcontentsline{toc}{subsection}{#1}% +\normalfont\@IEEEcompsoconly{\sffamily}\footnotesize\interlinepenalty500% +\vskip 4\baselineskip plus 1fil minus 0\baselineskip% +\parskip=0pt\par% +\noindent\textbf{#1\ }\@IEEEgobbleleadPARNLSP}{\relax\par\normalfont} + + +% provide the user with some old font commands +% got this from article.cls +\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm} +\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf} +\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt} +\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf} +\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit} +\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl} +\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc} +\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal} +\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal} + + +% SPECIAL PAPER NOTICE COMMANDS +% +% holds the special notice text +\def\@IEEEspecialpapernotice{\relax} + +% for special papers, like invited papers, the user can do: +% \IEEEspecialpapernotice{(Invited Paper)} before \maketitle +\def\IEEEspecialpapernotice#1{\ifCLASSOPTIONconference% +\def\@IEEEspecialpapernotice{{\sublargesize\textit{#1}\vspace*{1em}}}% +\else% +\def\@IEEEspecialpapernotice{{\\*[1.5ex]\sublargesize\textit{#1}}\vspace*{-2ex}}% +\fi} + + + + +% PUBLISHER ID COMMANDS +% to insert a publisher's ID footer +% V1.6 \IEEEpubid has been changed so that the change in page size and style +% occurs in \maketitle. \IEEEpubid must now be issued prior to \maketitle +% use \IEEEpubidadjcol as before - in the second column of the title page +% These changes allow \maketitle to take the reduced page height into +% consideration when dynamically setting the space between the author +% names and the maintext. +% +% the amount the main text is pulled up to make room for the +% publisher's ID footer +% The IEEE uses about 1.3\baselineskip for journals, +% dynamic title spacing will clean up the fraction +\def\@IEEEpubidpullup{1.3\baselineskip} +\ifCLASSOPTIONtechnote +% for technotes it must be an integer of baselineskip as there can be no +% dynamic title spacing for two column mode technotes (the title is in the +% in first column) and we should maintain an integer number of lines in the +% second column +% There are some examples (such as older issues of "Transactions on +% Information Theory") in which the IEEE really pulls the text off the ID for +% technotes - about 0.55in (or 4\baselineskip). We'll use 2\baselineskip +% and call it even. +\def\@IEEEpubidpullup{2\baselineskip} +\fi + +% V1.7 compsoc does not use a pullup +\ifCLASSOPTIONcompsoc +\def\@IEEEpubidpullup{0pt} +\fi + +% holds the ID text +\def\@IEEEpubid{\relax} + +% flag so \maketitle can tell if \IEEEpubid was called +\newif\if@IEEEusingpubid +\global\@IEEEusingpubidfalse +% issue this command in the page to have the ID at the bottom +% V1.6 use before \maketitle +\def\IEEEpubid#1{\def\@IEEEpubid{#1}\global\@IEEEusingpubidtrue} + + +% command which will pull up (shorten) the column it is executed in +% to make room for the publisher ID. Place in the second column of +% the title page when using \IEEEpubid +% Is smart enough not to do anything when in single column text or +% if the user hasn't called \IEEEpubid +% currently needed in for the second column of a page with the +% publisher ID. If not needed in future releases, please provide this +% command and define it as \relax for backward compatibility +% v1.6b do not allow command to operate if the peer review option has been +% selected because \IEEEpubidadjcol will not be on the cover page. +% V1.7 do nothing if compsoc +\def\IEEEpubidadjcol{\ifCLASSOPTIONcompsoc\else\ifCLASSOPTIONpeerreview\else +\if@twocolumn\if@IEEEusingpubid\enlargethispage{-\@IEEEpubidpullup}\fi\fi\fi\fi} + +% Special thanks to Peter Wilson, Daniel Luecking, and the other +% gurus at comp.text.tex, for helping me to understand how best to +% implement the IEEEpubid command in LaTeX. + + + +%% Lockout some commands under various conditions + +% general purpose bit bucket +\newsavebox{\@IEEEtranrubishbin} + +% flags to prevent multiple warning messages +\newif\if@IEEEWARNthanks +\newif\if@IEEEWARNIEEEPARstart +\newif\if@IEEEWARNIEEEbiography +\newif\if@IEEEWARNIEEEbiographynophoto +\newif\if@IEEEWARNIEEEpubid +\newif\if@IEEEWARNIEEEpubidadjcol +\newif\if@IEEEWARNIEEEmembership +\newif\if@IEEEWARNIEEEaftertitletext +\@IEEEWARNthankstrue +\@IEEEWARNIEEEPARstarttrue +\@IEEEWARNIEEEbiographytrue +\@IEEEWARNIEEEbiographynophototrue +\@IEEEWARNIEEEpubidtrue +\@IEEEWARNIEEEpubidadjcoltrue +\@IEEEWARNIEEEmembershiptrue +\@IEEEWARNIEEEaftertitletexttrue + + +%% Lockout some commands when in various modes, but allow them to be restored if needed +%% +% save commands which might be locked out +% so that the user can later restore them if needed +\let\@IEEESAVECMDthanks\thanks +\let\@IEEESAVECMDIEEEPARstart\IEEEPARstart +\let\@IEEESAVECMDIEEEbiography\IEEEbiography +\let\@IEEESAVECMDendIEEEbiography\endIEEEbiography +\let\@IEEESAVECMDIEEEbiographynophoto\IEEEbiographynophoto +\let\@IEEESAVECMDendIEEEbiographynophoto\endIEEEbiographynophoto +\let\@IEEESAVECMDIEEEpubid\IEEEpubid +\let\@IEEESAVECMDIEEEpubidadjcol\IEEEpubidadjcol +\let\@IEEESAVECMDIEEEmembership\IEEEmembership +\let\@IEEESAVECMDIEEEaftertitletext\IEEEaftertitletext + + +% disable \IEEEPARstart when in draft mode +% This may have originally been done because the pre-V1.6 drop letter +% algorithm had problems with a non-unity baselinestretch +% At any rate, it seems too formal to have a drop letter in a draft +% paper. +\ifCLASSOPTIONdraftcls +\def\IEEEPARstart#1#2{#1#2\if@IEEEWARNIEEEPARstart\typeout{** ATTENTION: \noexpand\IEEEPARstart + is disabled in draft mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEPARstartfalse} +\fi +% and for technotes +\ifCLASSOPTIONtechnote +\def\IEEEPARstart#1#2{#1#2\if@IEEEWARNIEEEPARstart\typeout{** WARNING: \noexpand\IEEEPARstart + is locked out for technotes (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEPARstartfalse} +\fi + + +% lockout unneeded commands when in conference mode +\ifCLASSOPTIONconference +% when locked out, \thanks, \IEEEbiography, \IEEEbiographynophoto, \IEEEpubid, +% \IEEEmembership and \IEEEaftertitletext will all swallow their given text. +% \IEEEPARstart will output a normal character instead +% warn the user about these commands only once to prevent the console screen +% from filling up with redundant messages +\def\thanks#1{\if@IEEEWARNthanks\typeout{** WARNING: \noexpand\thanks + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNthanksfalse} +\def\IEEEPARstart#1#2{#1#2\if@IEEEWARNIEEEPARstart\typeout{** WARNING: \noexpand\IEEEPARstart + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEPARstartfalse} + + +% LaTeX treats environments and commands with optional arguments differently. +% the actual ("internal") command is stored as \\commandname +% (accessed via \csname\string\commandname\endcsname ) +% the "external" command \commandname is a macro with code to determine +% whether or not the optional argument is presented and to provide the +% default if it is absent. So, in order to save and restore such a command +% we would have to save and restore \\commandname as well. But, if LaTeX +% ever changes the way it names the internal names, the trick would break. +% Instead let us just define a new environment so that the internal +% name can be left undisturbed. +\newenvironment{@IEEEbogusbiography}[2][]{\if@IEEEWARNIEEEbiography\typeout{** WARNING: \noexpand\IEEEbiography + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEbiographyfalse% +\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax} +% and make biography point to our bogus biography +\let\IEEEbiography=\@IEEEbogusbiography +\let\endIEEEbiography=\end@IEEEbogusbiography + +\renewenvironment{IEEEbiographynophoto}[1]{\if@IEEEWARNIEEEbiographynophoto\typeout{** WARNING: \noexpand\IEEEbiographynophoto + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEbiographynophotofalse% +\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax} + +\def\IEEEpubid#1{\if@IEEEWARNIEEEpubid\typeout{** WARNING: \noexpand\IEEEpubid + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEpubidfalse} +\def\IEEEpubidadjcol{\if@IEEEWARNIEEEpubidadjcol\typeout{** WARNING: \noexpand\IEEEpubidadjcol + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEpubidadjcolfalse} +\def\IEEEmembership#1{\if@IEEEWARNIEEEmembership\typeout{** WARNING: \noexpand\IEEEmembership + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEmembershipfalse} +\def\IEEEaftertitletext#1{\if@IEEEWARNIEEEaftertitletext\typeout{** WARNING: \noexpand\IEEEaftertitletext + is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEaftertitletextfalse} +\fi + + +% provide a way to restore the commands that are locked out +\def\IEEEoverridecommandlockouts{% +\typeout{** ATTENTION: Overriding command lockouts (line \the\inputlineno).}% +\let\thanks\@IEEESAVECMDthanks% +\let\IEEEPARstart\@IEEESAVECMDIEEEPARstart% +\let\IEEEbiography\@IEEESAVECMDIEEEbiography% +\let\endIEEEbiography\@IEEESAVECMDendIEEEbiography% +\let\IEEEbiographynophoto\@IEEESAVECMDIEEEbiographynophoto% +\let\endIEEEbiographynophoto\@IEEESAVECMDendIEEEbiographynophoto% +\let\IEEEpubid\@IEEESAVECMDIEEEpubid% +\let\IEEEpubidadjcol\@IEEESAVECMDIEEEpubidadjcol% +\let\IEEEmembership\@IEEESAVECMDIEEEmembership% +\let\IEEEaftertitletext\@IEEESAVECMDIEEEaftertitletext} + + + +% need a backslash character for typeout output +{\catcode`\|=0 \catcode`\\=12 +|xdef|@IEEEbackslash{\}} + + +% hook to allow easy disabling of all legacy warnings +\def\@IEEElegacywarn#1#2{\typeout{** ATTENTION: \@IEEEbackslash #1 is deprecated (line \the\inputlineno). +Use \@IEEEbackslash #2 instead.}} + + +% provide some legacy IEEEtran commands +\def\IEEEcompsoctitleabstractindextext{\@IEEElegacywarn{IEEEcompsoctitleabstractindextext}{IEEEtitleabstractindextext}\IEEEtitleabstractindextext} +\def\IEEEdisplaynotcompsoctitleabstractindextext{\@IEEElegacywarn{IEEEdisplaynotcompsoctitleabstractindextext}{IEEEdisplaynontitleabstractindextext}\IEEEdisplaynontitleabstractindextext} +% provide some legacy IEEEtran environments + + +% V1.8a no more support for these legacy commands +%\def\authorblockA{\@IEEElegacywarn{authorblockA}{IEEEauthorblockA}\IEEEauthorblockA} +%\def\authorblockN{\@IEEElegacywarn{authorblockN}{IEEEauthorblockN}\IEEEauthorblockN} +%\def\authorrefmark{\@IEEElegacywarn{authorrefmark}{IEEEauthorrefmark}\IEEEauthorrefmark} +%\def\PARstart{\@IEEElegacywarn{PARstart}{IEEEPARstart}\IEEEPARstart} +%\def\pubid{\@IEEElegacywarn{pubid}{IEEEpubid}\IEEEpubid} +%\def\pubidadjcol{\@IEEElegacywarn{pubidadjcol}{IEEEpubidadjcol}\IEEEpubidadjcol} +%\def\specialpapernotice{\@IEEElegacywarn{specialpapernotice}{IEEEspecialpapernotice}\IEEEspecialpapernotice} +% and environments +%\def\keywords{\@IEEElegacywarn{keywords}{IEEEkeywords}\IEEEkeywords} +%\def\endkeywords{\endIEEEkeywords} +% V1.8 no more support for legacy IED list commands +%\let\labelindent\IEEElabelindent +%\def\calcleftmargin{\@IEEElegacywarn{calcleftmargin}{IEEEcalcleftmargin}\IEEEcalcleftmargin} +%\def\setlabelwidth{\@IEEElegacywarn{setlabelwidth}{IEEEsetlabelwidth}\IEEEsetlabelwidth} +%\def\usemathlabelsep{\@IEEElegacywarn{usemathlabelsep}{IEEEusemathlabelsep}\IEEEusemathlabelsep} +%\def\iedlabeljustifyc{\@IEEElegacywarn{iedlabeljustifyc}{IEEEiedlabeljustifyc}\IEEEiedlabeljustifyc} +%\def\iedlabeljustifyl{\@IEEElegacywarn{iedlabeljustifyl}{IEEEiedlabeljustifyl}\IEEEiedlabeljustifyl} +%\def\iedlabeljustifyr{\@IEEElegacywarn{iedlabeljustifyr}{IEEEiedlabeljustifyr}\IEEEiedlabeljustifyr} +% V1.8 no more support for QED and proof stuff +%\def\QED{\@IEEElegacywarn{QED}{IEEEQED}\IEEEQED} +%\def\QEDclosed{\@IEEElegacywarn{QEDclosed}{IEEEQEDclosed}\IEEEQEDclosed} +%\def\QEDopen{\@IEEElegacywarn{QEDopen}{IEEEQEDopen}\IEEEQEDopen} +%\AtBeginDocument{\def\proof{\@IEEElegacywarn{proof}{IEEEproof}\IEEEproof}\def\endproof{\endIEEEproof}} +% V1.8 no longer support biography or biographynophoto +%\def\biography{\@IEEElegacywarn{biography}{IEEEbiography}\IEEEbiography} +%\def\biographynophoto{\@IEEElegacywarn{biographynophoto}{IEEEbiographynophoto}\IEEEbiographynophoto} +%\def\endbiography{\endIEEEbiography} +%\def\endbiographynophoto{\endIEEEbiographynophoto} +% V1.7 and later no longer supports \overrideIEEEmargins +%\def\overrideIEEEmargins{% +%\typeout{** WARNING: \string\overrideIEEEmargins \space no longer supported (line \the\inputlineno).}% +%\typeout{** Use the \string\CLASSINPUTinnersidemargin, \string\CLASSINPUToutersidemargin \space controls instead.}} + +\endinput + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% End of IEEEtran.cls %%%%%%%%%%%%%%%%%%%%%%%%%%%% +% That's all folks! + diff --git a/cs_capstone_documents/requirements/latexmk.pl b/cs_capstone_documents/requirements/latexmk.pl new file mode 100644 index 0000000..0a84e0e --- /dev/null +++ b/cs_capstone_documents/requirements/latexmk.pl @@ -0,0 +1,8802 @@ +#!/usr/bin/env perl + +# ?? Still need to fix bcf error issue. +# Don't keep looping after error +# pvc: Only re-run on USER FILE CHANGE. +# See # ??????? BCF + + +#!!!!!!!!??? Check @pwd_log + + +# !!!!!!!!!! Don't forget to document $silence_logfile_warnings.!!! + +# N.B. !!!!!!!!!!! See 17 July 2012 comments !!!!!!!!!!!!!!!!!! + +# On a UNIX-like system, the above enables latexmk to run independently +# of the location of the perl executable. This line relies on the +# existence of the program /usr/bin/env +# If there is a problem for any reason, you can replace the first line of +# this file by: + +#!/usr/bin/perl -w + +# with the path of the perl executable adjusted for your system. + +use warnings; + +# Delete #??!! when working + +# See ?? <=============================== + +## ?? Issues with clean-up +## List of aux files deleted is those read, not those generated. +## Other files are generated by (pdf)latex; should they be deleted? +## (I have hooks for this). + + + +#======================================= + +#?? Force mode doesn't appear to do force (if error in latex file) +#??? Get banner back in. +#?? CORRECT DIAGNOSTICS ON CHANGED FILES IF THEY DIDN'T EXIST BEFORE +#?? Further corrections to deal with disappeared source files for custom dependencies. +# Message repeatedly appears about remake when source file of cusdep doesn't exist. +#?? logfile w/o fdb file: don't set changed file, perhaps for generated exts. +# Reconsider +#?? Do proper run-stuff for bibtex, makeindex, cus-deps. OK I think +# Parse and correctly find ist files + + +# ATTEMPT TO ALLOW FILENAMES WITH SPACES: +# (as of 1 Apr 2006, and then 14 Sep. 2007) + +# Problems: +# A. Quoting filenames will not always work. +# a. Under UNIX, quotes are legal in filenames, so when PERL +# directly runs a binary, a quoted filename will be treated as +# as a filename containing a quote character. But when it calls +# a shell, the quotes are handled by the shell as quotes. +# b. Under MSWin32, quotes are illegal filename characters, and tend +# to be handled correctly. +# c. But under cygwin, results are not so clear (there are many +# combinations: native v. cygwin perl, native v cygwin programs +# NT v. unix scripts, which shell is called. +# B. TeX doesn't always handle filenames with spaces gracefully. +# a. UNIX/LINUX: The version on gluon2 Mar 31, 2006 to Sep. 2007) +# doesn't handle them at all. (TeX treats space as separator.) +# b. At least some later versions actually do (Brad Miller e-mail, +# Sep. 2007). +# c. fptex [[e-TeXk, Version 3.141592-2.1 (Web2c 7.5.2)] does, on +# my MSWin at home. In \input the filename must be in quotes. +# d. Bibtex [BibTeX (Web2c 7.5.2) 0.99c on my MSWin system at home, +# Sep. 2007] does not allow names of bibfiles to have spaces. +# C. =====> Using the shell for command lines is not safe, since special +# characters can cause lots of mayhem. +# It will therefore be a good idea to sanitize filenames. +# +# I've sanitized all calls out: +# a. system and exec use a single argument, which forces +# use of shell, under all circumstances +# Thus I can safely use quotes on filenames: They will be handled by +# the shell under UNIX, and simply passed on to the program under MSWin32. +# b. I reorganized Run, Run_Detached to use single command line +# c. All calls to Run and Run_Detached have quoted filenames. +# d. So if a space-free filename with wildcards is given on latexmk's +# command line, and it globs to space-containing filename(s), that +# works (fptex on home computer, native NT tex) +# e. ====> But globbing fails: the glob function takes space as filename +# separator. ==================== + +#================= TO DO ================ +# +# 1. See ?? ESPECIALLY $MSWin_fudge_break +# 2. Check fudged conditions in looping and make_files +# 3. Should not completely abort after a run that ends in failure from latex +# Missing input files (including via custom dependency) should be checked for +# a change in status +# If sources for missing files from custom dependency +# are available, then do a rerun +# If sources of any kind become available rerun (esp. for pvc) +# rerun +# Must parse log_file after unsuccessful run of latex: it may give +# information about missing files. +# 4. Check file of bug reports and requests +# 5. Rationalize bibtex warnings and errors. Two almost identical routines. +# Should 1. Use single routine +# 2. Convert errors to failure only in calling routine +# 3. Save first warning/error. + +# ?? Use of generated_exts arrays and hashes needs rationalization + +# To do: +# Rationalize again handling of include files. +# Now I use kpsewhich to do searches, if file not found +# (How do I avoid getting slowed down too much?) +# Document the assumptions at each stage of processing algorithm. +# Option to restart previewer automatically, if it dies under -pvc +# Test for already running previewer gets wrong answer if another +# process has the viewed file in its command line + +$my_name = 'latexmk'; +$My_name = 'Latexmk'; +$version_num = '4.52c'; +$version_details = "$My_name, John Collins, 19 Jan. 2017"; + +use Config; +use File::Basename; +use File::Copy; +use File::Glob ':glob'; # Better glob. Does not use space as item separator. +use File::Path 2.08 qw( make_path ); +use FileHandle; +use File::Find; +use List::Util qw( max ); +use Cwd; # To be able to change cwd +use Cwd "chdir"; # Ensure $ENV{PWD} tracks cwd +use Digest::MD5; + +#use strict; + +# The following variables are assigned once and then used in symbolic +# references, so we need to avoid warnings 'name used only once': +use vars qw( $dvi_update_command $ps_update_command $pdf_update_command ); + +# Translation of signal names to numbers and vv: +%signo = (); +@signame = (); +if ( defined $Config{sig_name} ) { + $i = 0; + foreach $name (split('\s+', $Config{sig_name})) { + $signo{$name} = $i; + $signame[$i] = $name; + $i++; + } +} +else { + warn "Something wrong with the perl configuration: No signals?\n"; +} + +## Copyright John Collins 1998-2017 +## (username jcc8 at node psu.edu) +## (and thanks to David Coppit (username david at node coppit.org) +## for suggestions) +## Copyright Evan McLean +## (modifications up to version 2) +## Copyright 1992 by David J. Musliner and The University of Michigan. +## (original version) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +## +## +## +## NEW FEATURES, since v. 2.0: +## 1. Correct algorithm for deciding how many times to run latex: +## based on whether source file(s) change between runs +## 2. Continuous preview works, and can be of ps file or dvi file +## 3. pdf creation by pdflatex possible +## 4. Defaults for commands are OS dependent. +## 5. Parsing of log file instead of source file is used to +## obtain dependencies, by default. +## +## Modification log from 9 Dec 2011 onwards in detail +## +## 12 Jan 2012 STILL NEED TO DOCUMENT some items below +## +## 19 Jan 2017 John Collins Make -jobname work with -pdfxe and -pdflua +## (v. 4.53c) +## 17 Jan 2017 John Collins Fix bbl file detection bug. +## Bbl files were previously only identified +## from occurrence as input files in log +## file rather than from fls as well. +## 16 Jan 2017 John Collins Clean up +## Add extra item to @file_not_found for +## xelatex's characteristic message. +## 14 Jan 2017 John Collins Fix some diagnostics. +## Detect graphics candidates in log file from +## <...> constructs. +## Don't look in log file for input files in the +## (...) and <...> constructs unless forced to +## by lack of up-to-date fls file. +## 13 Jan 2017 John Collins Kpsewhich diagnostics: also if not +## silent, or when $kpsewhich_show set. +## Optimize calls to kpsewhich to find files +## given by lines put in log file by +## graphics package. +## Work around LuaTeX line-wrapping bug. (LuaTeX 0.95.0) +## 12 Jan 2017 John Collins Improve error reporting on failed run. +## 11 Jan 2017 John Collins With -diagnositcs, include invocation +## and results for kpsewhich. +## 4, 10 Jan 2017 John Collins Finish fix for read-after-write files +## 29-31 Dec 2016 John Collins V. 4.51 +## For biber and bibtex rules, included .blg +## file as extra generated file. +## Similarly for makeindex rule +## 3 Nov 2016 John Collins Start to fix problem reported by jfbu +## that with deleted aux file, latexmk +## does too few runs. +## Problems: +## 1. latexmk doesn't create initial +## dummy aux or fdb when only one +## fails to exist, but only when +## both fail to exist. +## 2. latexmk detects the aux file as +## only read after write, and +## hence not a true dependent. +## That is the initial attempt to +## read, giving a No file message, +## is not recorded in the fls +## file. +## First fix: missing aux file => make +## dummy. +## Need better: if source file in fdb +## doesn't exist initially, then it +## should be counted as initially +## read, so not read after write. +## 18 Oct 2016 John Collins xelatex support via xdv file for speed. +## lualatex +## 5 Sep 2016 John Collins Add routines: rdb_list_source, rdb_set_source +## 17 Aug 2016 John Collins Add XDG Base Directory compatibility +## for per-user rc file +## 1 May 2016 John Collins Correct creation of output and aux directories +## to correctly handle relative paths when -cd +## is used. +## 22 Apr 2016 John Collins Fix problem of -C not always working correctly +## when compilation was with -pdf and clear was default. +## (Correctly default set of rules in rdb_make_rule_list.) +## Ver. 4.45 +## +## 1998-2010, John Collins. Many improvements and fixes. +## See CHANGE-log.txt for full list, and CHANGES for summary +## +## Modified by Evan McLean (no longer available for support) +## Original script (RCS version 2.3) called "go" written by David J. Musliner +## +##----------------------------------------------------------------------- + + +## Explicit exit codes: +## 10 = bad command line arguments +## 11 = file specified on command line not found +## or other file not found +## 12 = failure in some part of making files +## 13 = error in initialization file +## 20 = probable bug +## or retcode from called program. + + +# Line length in log file that indicates wrapping. +# This number EXCLUDES line-end characters, and is one-based. +# It is the parameter max_print_line in the TeX program. (tex.web) +$log_wrap = 79; + +######################################################################### +## Default parsing and file-handling settings + +## Array of reg-exps for patterns in log-file for file-not-found +## Each item is the string in a regexp, without the enclosing slashes. +## First parenthesized part is the filename. +## Note the need to quote slashes and single right quotes to make them +## appear in the regexp. +## Add items by push, e.g., +## push @file_not_found, '^No data file found `([^\\\']*)\\\''; +## will give match to line starting "No data file found `filename'" +@file_not_found = ( + '^No file\\s*(.*)\\.$', + '^\\! LaTeX Error: File `([^\\\']*)\\\' not found\\.', + '.*?:\\d*: LaTeX Error: File `([^\\\']*)\\\' not found\\.', + '^LaTeX Warning: File `([^\\\']*)\\\' not found', + '^Package .* [fF]ile `([^\\\']*)\\\' not found', + 'Error: pdflatex \(file ([^\)]*)\): cannot find image file', + ': File (.*) not found:\s*$', + '! Unable to load picture or PDF file \\\'([^\\\']+)\\\'.', +); + +## Hash mapping file extension (w/o period, e.g., 'eps') to a single regexp, +# whose matching by a line in a file with that extension indicates that the +# line is to be ignored in the calculation of the hash number (md5 checksum) +# for the file. Typically used for ignoring datestamps in testing whether +# a file has changed. +# Add items e.g., by +# $hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: '; +# This makes the hash calculation for an eps file ignore lines starting with +# '%%CreationDate: ' +# ?? Note that a file will be considered changed if +# (a) its size changes +# or (b) its hash changes +# So it is useful to ignore lines in the hash calculation only if they +# are of a fixed size (as with a date/time stamp). +%hash_calc_ignore_pattern =(); + + +# Specification of templates for extra rules. +# See subroutine rdb_make_rule_list for examples of rule templates. +# See subroutine rdb_set_rules for how they get used to construct rules. +# (Documentation obviously needs to be improved!) +%extra_rule_spec = (); + + +# Hooks for customized extra processing on aux files. The following +# variable is an array of references to function. Each function is +# invoked in turn when a line of an aux file is processed (if none +# of the built-in actions have been done). On entry to the function, +# the following variables are set: +# $_ = current line of aux file +# $rule = name of rule during the invocation of which, the aux file +# was supposed to have been generated. +@aux_hooks = (); + +######################################################################### +## Default document processing programs, and related settings, +## These are mostly the same on all systems. +## Most of these variables represents the external command needed to +## perform a certain action. Some represent switches. + +## Commands to invoke latex, pdflatex, etc +$latex = 'latex %O %S'; +$pdflatex = 'pdflatex %O %S'; +$lualatex = 'lualatex %O %S'; +# xelatex is used to give xdv file, not pdf file +$xelatex = 'xelatex -no-pdf %O %S'; + +## Default switches: +$latex_default_switches = ''; +$pdflatex_default_switches = ''; +$lualatex_default_switches = ''; +$xelatex_default_switches = ''; + +## Switch(es) to make them silent: +$latex_silent_switch = '-interaction=batchmode'; +$pdflatex_silent_switch = '-interaction=batchmode'; +$lualatex_silent_switch = '-interaction=batchmode'; +$xelatex_silent_switch = '-interaction=batchmode'; + +# %input_extensions maps primary_rule_name to pointer to hash of file extensions +# used for extensionless files specified in the source file by constructs +# like \input{file} \includegraphics{file} +# Could write +#%input_extensions = ( 'latex' => { 'tex' => 1, 'eps' => 1 };, +# 'pdflatex' => { 'tex' => 1, 'pdf' => 1, 'jpg' => 1, 'png' => 1 }; ); +# Instead we'll exercise the user-friendly access routines: +add_input_ext( 'latex', 'tex', 'eps' ); +add_input_ext( 'pdflatex', 'tex', 'jpg', 'pdf', 'png' ); +add_input_ext( 'lualatex', 'tex', 'jpg', 'pdf', 'png' ); +add_input_ext( 'xelatex', 'tex', 'jpg', 'pdf', 'png' ); +#show_input_ext( 'latex' ); show_input_ext( 'pdflatex' ); + +# Information about options to latex and pdflatex that latexmk will simply +# pass through to (pdf)latex +# Option without arg. maps to itself. +# Option with arg. maps the option part to the full specification +# e.g., -kpathsea-debug => -kpathsea-debug=NUMBER +%allowed_latex_options = (); +%allowed_latex_options_with_arg = (); +foreach ( + ##### + # TeXLive options + "-draftmode switch on draft mode (generates no output PDF)", + "-enc enable encTeX extensions such as \\mubyte", + "-etex enable e-TeX extensions", + "-file-line-error enable file:line:error style messages", + "-no-file-line-error disable file:line:error style messages", + "-fmt=FMTNAME use FMTNAME instead of program name or a %& line", + "-halt-on-error stop processing at the first error", + "-interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n". + " scrollmode/errorstopmode)", + "-ipc send DVI output to a socket as well as the usual\n". + " output file", + "-ipc-start as -ipc, and also start the server at the other end", + "-kpathsea-debug=NUMBER set path searching debugging flags according to\n". + " the bits of NUMBER", + "-mktex=FMT enable mktexFMT generation (FMT=tex/tfm/pk)", + "-no-mktex=FMT disable mktexFMT generation (FMT=tex/tfm/pk)", + "-mltex enable MLTeX extensions such as \charsubdef", + "-output-comment=STRING use STRING for DVI file comment instead of date\n". + " (no effect for PDF)", + "-output-format=FORMAT use FORMAT for job output; FORMAT is `dvi\" or `pdf\"", + "-parse-first-line enable parsing of first line of input file", + "-no-parse-first-line disable parsing of first line of input file", + "-progname=STRING set program (and fmt) name to STRING", + "-shell-escape enable \\write18{SHELL COMMAND}", + "-no-shell-escape disable \\write18{SHELL COMMAND}", + "-shell-restricted enable restricted \\write18", + "-src-specials insert source specials into the DVI file", + "-src-specials=WHERE insert source specials in certain places of\n". + " the DVI file. WHERE is a comma-separated value\n". + " list: cr display hbox math par parend vbox", + "-synctex=NUMBER generate SyncTeX data for previewers if nonzero", + "-translate-file=TCXNAME use the TCX file TCXNAME", + "-8bit make all characters printable by default", + + ##### + # MikTeX options not in TeXLive + "-alias=app pretend to be app", + "-buf-size=n maximum number of characters simultaneously present\n". + " in current lines", + "-c-style-errors C-style error messages", + "-disable-installer disable automatic installation of missing packages", + "-disable-pipes disable input (output) from (to) child processes", + "-disable-write18 disable the \\write18{command} construct", + "-dont-parse-first-line disable checking whether the first line of the main\n". + " input file starts with %&", + "-enable-enctex enable encTeX extensions such as \\mubyte", + "-enable-installer enable automatic installation of missing packages", + "-enable-mltex enable MLTeX extensions such as \charsubdef", + "-enable-pipes enable input (output) from (to) child processes", + "-enable-write18 fully enable the \\write18{command} construct", + "-error-line=n set the width of context lines on terminal error\n". + " messages", + "-extra-mem-bot=n set the extra size (in memory words) for large data\n". + " structures", + "-extra-mem-top=n set the extra size (in memory words) for chars,\n". + " tokens, et al", + "-font-max=n set the maximum internal font number", + "-font-mem-size=n set the size, in TeX memory words, of the font memory", + "-half-error-line=n set the width of first lines of contexts in terminal\n". + " error messages", + "-hash-extra=n set the extra space for the hash table of control\n". + " sequences", + "-job-time=file set the time-stamp of all output files equal to\n". + " file's time-stamp", + "-main-memory=n change the total size (in memory words) of the main\n". + " memory array", + "-max-in-open=n set the maximum number of input files and error\n". + " insertions that can be going on simultaneously", + "-max-print-line=n set the width of longest text lines output", + "-max-strings=n set the maximum number of strings", + "-nest-size=n set the maximum number of semantic levels\n". + " simultaneously active", + "-no-c-style-errors standard error messages", + "-param-size=n set the the maximum number of simultaneous macro\n". + " parameters", + "-pool-size=n set the maximum number of characters in strings", + "-record-package-usages=file record all package usages and write them into\n". + " file", + "-restrict-write18 partially enable the \\write18{command} construct", + "-save-size=n set the the amount of space for saving values\n". + " outside of current group", + "-stack-size=n set the maximum number of simultaneous input sources", + "-string-vacancies=n set the minimum number of characters that should be\n". + " available for the user's control sequences and font\n". + " names", + "-tcx=name process the TCX table name", + "-time-statistics show processing time statistics", + "-trace enable trace messages", + "-trace=tracestreams enable trace messages. The tracestreams argument is\n". + " a comma-separated list of trace stream names", + "-trie-size=n set the amount of space for hyphenation patterns", + "-undump=name use name as the name of the format to be used,\n". + " instead of the name by which the program was\n". + " called or a %& line.", + + ##### + # Options passed to (pdf)latex that have special processing by latexmk, + # so they are commented out here. + #-jobname=STRING set the job name to STRING + #-aux-directory=dir Set the directory dir to which auxiliary files are written + #-output-directory=DIR use existing DIR as the directory to write files in + #-quiet + #-recorder enable filename recorder + # + # Options with different processing by latexmk than (pdf)latex + #-help + #-version + # + # Options NOT used by latexmk + #-includedirectory=dir prefix dir to the search path + #-initialize become the INI variant of the compiler + #-ini be pdfinitex, for dumping formats; this is implicitly + # true if the program name is `pdfinitex' +) { + if ( /^([^\s=]+)=/ ) { + $allowed_latex_options_with_arg{$1} = $_; + } + elsif ( /^([^\s=]+)\s/ ) { + $allowed_latex_options{$1} = $_; + } + else { + $allowed_latex_options{$_} = $_; + } +} + +# Arrays of options that will be added to latex and pdflatex. +# These need to be stored until after the command line parsing is finished, +# in case the values of $latex and/or $pdflatex change after an option +# is added. +@extra_latex_options = (); +@extra_pdflatex_options = (); +@extra_lualatex_options = (); +@extra_xelatex_options = (); + + +## Command to invoke biber & bibtex +$biber = 'biber %O %B'; +$bibtex = 'bibtex %O %B'; +# Switch(es) to make biber & bibtex silent: +$biber_silent_switch = '--onlylog'; +$bibtex_silent_switch = '-terse'; +$bibtex_use = 1; # Whether to actually run bibtex to update bbl files + # 0: Never run bibtex + # 1: Run bibtex only if the bibfiles exists + # according to kpsewhich, and the bbl files + # appear to be out-of-date + # 2: Run bibtex when the bbl files are out-of-date + # In any event bibtex is only run if the log file + # indicates that the document uses bbl files. + +## Command to invoke makeindex +$makeindex = 'makeindex %O -o %D %S'; +# Switch(es) to make makeinex silent: +$makeindex_silent_switch = '-q'; + +## Command to convert dvi file to pdf file directly: +$dvipdf = 'dvipdf %O %S %D'; +# N.B. Standard dvipdf runs dvips and gs with their silent switch, so for +# standard dvipdf $dvipdf_silent_switch is unneeded, but innocuous. +# But dvipdfmx can be used instead, and it has a silent switch (-q). +# So implementing $dvipdf_silent_switch is useful. + +$dvipdf_silent_switch = '-q'; + +## Command to convert dvi file to ps file: +$dvips = 'dvips %O -o %D %S'; +## Command to convert dvi file to ps file in landscape format: +$dvips_landscape = 'dvips -tlandscape %O -o %D %S'; +# Switch(es) to get dvips to make ps file suitable for conversion to good pdf: +# (If this is not used, ps file and hence pdf file contains bitmap fonts +# (type 3), which look horrible under acroread. An appropriate switch +# ensures type 1 fonts are generated. You can put this switch in the +# dvips command if you prefer.) +$dvips_pdf_switch = '-P pdf'; +# Switch(es) to make dvips silent: +$dvips_silent_switch = '-q'; + +## Command to convert ps file to pdf file: +$ps2pdf = 'ps2pdf %O %S %D'; + +## Command to convert xdv file to pdf file +$xdvipdfmx = 'xdvipdfmx -o %D %O %S'; +$xdvipdfmx_silent_switch = '-q'; + + +## Command to search for tex-related files +$kpsewhich = 'kpsewhich %S'; + +## Command to run make: +$make = 'make'; + +##Printing: +$print_type = 'auto'; # When printing, print the postscript file. + # Possible values: 'dvi', 'ps', 'pdf', 'auto', 'none' + # 'auto' ==> set print type according to the printable + # file(s) being made: priority 'ps', 'pdf', 'dvi' + +## Which treatment of default extensions and filenames with +## multiple extensions is used, for given filename on +## tex/latex's command line? See sub find_basename for the +## possibilities. +## Current tex's treat extensions like UNIX teTeX: +$extension_treatment = 'unix'; + +## Substitute backslashes in file and directory names for +## MSWin command line +$MSWin_back_slash = 1; + +$dvi_update_signal = undef; +$ps_update_signal = undef; +$pdf_update_signal = undef; + +$dvi_update_command = undef; +$ps_update_command = undef; +$pdf_update_command = undef; + +$allow_subdir_creation = 1; + +$new_viewer_always = 0; # If 1, always open a new viewer in pvc mode. + # If 0, only open a new viewer if no previous + # viewer for the same file is detected. + +$quote_filenames = 1; # Quote filenames in external commands + +$del_dir = ''; # Directory into which cleaned up files are to be put. + # If $del_dir is '', just delete the files + +@rc_system_files = (); + +######################################################################### + +################################################################ +## Special variables for system-dependent fudges, etc. +$log_file_binary = 0; # Whether to treat log file as binary + # Normally not, since the log file SHOULD be pure text. + # But Miktex 2.7 sometimes puts binary characters + # in it. (Typically in construct \OML ... after + # overfull box with mathmode.) + # Sometimes there is ctrl/Z, which is not only non-text, + # but is end-of-file marker for MS-Win in text mode. + +$MSWin_fudge_break = 1; # Give special treatment to ctrl/C and ctrl/break + # in -pvc mode under MSWin + # Under MSWin32 (at least with perl 5.8 and WinXP) + # when latexmk is running another program, and the + # user gives ctrl/C or ctrl/break, to stop the + # daughter program, not only does it reach + # the daughter, but also latexmk/perl, so + # latexmk is stopped also. In -pvc mode, + # this is not normally desired. So when the + # $MSWin_fudge_break variable is set, + # latexmk arranges to ignore ctrl/C and + # ctrl/break during processing of files; + # only the daughter programs receive them. + # This fudge is not applied in other + # situations, since then having latexmk also + # stopping because of the ctrl/C or + # ctrl/break signal is desirable. + # The fudge is not needed under UNIX (at least + # with Perl 5.005 on Solaris 8). Only the + # daughter programs receive the signal. In + # fact the inverse would be useful: In + # normal processing, as opposed to -pvc, if + # force mode (-f) is set, a ctrl/C is + # received by a daughter program does not + # also stop latexmk. Under tcsh, we get + # back to a command prompt, while latexmk + # keeps running in the background! + + +################################################################ + + +# System-dependent overrides: +# Currently, the cases I have tests for are: MSWin32, cygwin, linux and +# darwin, with the main complications being for MSWin32 and cygwin. +# Special treatment may also be useful for MSYS (for which $^O reports +# "msys"). This is another *nix-emulation/system for MSWindows. At +# present it is treated as unix-like, but the environment variables +# are those of Windows. (The test for USERNAME as well as USER was +# to make latexmk work under MSYS's perl.) +# +if ( $^O eq "MSWin32" ) { +# Pure MSWindows configuration + ## Configuration parameters: + + ## Use first existing case for $tmpdir: + $tmpdir = $ENV{TMPDIR} || $ENV{TEMP} || '.'; + $log_file_binary = 1; # Protect against ctrl/Z in log file from + # Miktex 2.7. + + ## List of possibilities for the system-wide initialization file. + ## The first one found (if any) is used. + @rc_system_files = ( "C:/latexmk/LatexMk", "C:/latexmk/latexmkrc" ); + + $search_path_separator = ';'; # Separator of elements in search_path + + # For a pdf-file, "start x.pdf" starts the pdf viewer associated with + # pdf files, so no program name is needed: + $pdf_previewer = 'start %O %S'; + $ps_previewer = 'start %O %S'; + $ps_previewer_landscape = $ps_previewer; + $dvi_previewer = 'start %O %S'; + $dvi_previewer_landscape = "$dvi_previewer"; + # Viewer update methods: + # 0 => auto update: viewer watches file (e.g., gv) + # 1 => manual update: user must do something: e.g., click on window. + # (e.g., ghostview, MSWIN previewers, acroread under UNIX) + # 2 => send signal. Number of signal in $dvi_update_signal, + # $ps_update_signal, $pdf_update_signal + # 3 => viewer can't update, because it locks the file and the file + # cannot be updated. (acroread under MSWIN) + # 4 => run a command to force the update. The commands are + # specified by the variables $dvi_update_command, + # $ps_update_command, $pdf_update_command + $dvi_update_method = 1; + $ps_update_method = 1; + $pdf_update_method = 3; # acroread locks the pdf file + # Use NONE as flag that I am not implementing some commands: + $lpr = + 'NONE $lpr variable is not configured to allow printing of ps files'; + $lpr_dvi = + 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; + $lpr_pdf = + 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; + # The $pscmd below holds a command to list running processes. It + # is used to find the process ID of the viewer looking at the + # current output file. The output of the command must include the + # process number and the command line of the processes, since the + # relevant process is identified by the name of file to be viewed. + # Its use is not essential. + $pscmd = + 'NONE $pscmd variable is not configured to detect running processes'; + $pid_position = -1; # offset of PID in output of pscmd. + # Negative means I cannot use ps +} +elsif ( $^O eq "cygwin" ) { + # The problem is a mixed MSWin32 and UNIX environment. + # Perl decides the OS is cygwin in two situations: + # 1. When latexmk is run from a cygwin shell under a cygwin + # environment. Perl behaves in a UNIX way. This is OK, since + # the user is presumably expecting UNIXy behavior. + # 2. When CYGWIN exectuables are in the path, but latexmk is run + # from a native NT shell. Presumably the user is expecting NT + # behavior. But perl behaves more UNIXy. This causes some + # clashes. + # The issues to handle are: + # 1. Perl sees both MSWin32 and cygwin filenames. This is + # normally only an advantage. + # 2. Perl uses a UNIX shell in the system command + # This is a nasty problem: under native NT, there is a + # start command that knows about NT file associations, so that + # we can do, e.g., (under native NT) system("start file.pdf"); + # But this won't work when perl has decided the OS is cygwin, + # even if it is invoked from a native NT command line. An + # NT command processor must be used to deal with this. + # 3. External executables can be native NT (which only know + # NT-style file names) or cygwin executables (which normally + # know both cygwin UNIX-style file names and NT file names, + # but not always; some do not know about drive names, for + # example). + # Cygwin executables for tex and latex may only know cygwin + # filenames. + # 4. The BIBINPUTS environment variables may be + # UNIX-style or MSWin-style depending on whether native NT or + # cygwin executables are used. They are therefore parsed + # differently. Here is the clash: + # a. If a user is running under an NT shell, is using a + # native NT installation of tex (e.g., fptex or miktex), + # but has the cygwin executables in the path, then perl + # detects the OS as cygwin, but the user needs NT + # behavior from latexmk. + # b. If a user is running under an UNIX shell in a cygwin + # environment, and is using the cygwin installation of + # tex, then perl detects the OS as cygwin, and the user + # needs UNIX behavior from latexmk. + # Latexmk has no way of detecting the difference. The two + # situations may even arise for the same user on the same + # computer simply by changing the order of directories in the + # path environment variable + + + ## Configuration parameters: We'll assume native NT executables. + ## The user should override if they are not. + + # This may fail: perl converts MSWin temp directory name to cygwin + # format. Names containing this string cannot be handled by native + # NT executables. + $tmpdir = $ENV{TMPDIR} || $ENV{TEMP} || '.'; + + ## List of possibilities for the system-wide initialization file. + ## The first one found (if any) is used. + ## We could stay with MSWin files here, since cygwin perl understands them + ## @rc_system_files = ( 'C:/latexmk/LatexMk', 'C:/latexmk/latexmkrc' ); + ## But they are deprecated in v. 1.7. So use the UNIX version, prefixed + ## with a cygwin equivalent of the MSWin location + ## In addition, we need to add the same set of possible locations as with + ## unix, so that the user use a unix-style setup. + @rc_system_files = (); + foreach ( 'LatexMk', 'latexmkrc' ) { + push @rc_system_files, + ( "/cygdrive/c/latexmk/$_", + "/opt/local/share/latexmk/$_", + "/usr/local/share/latexmk/$_", + "/usr/local/lib/latexmk/$_" ); + } + $search_path_separator = ';'; # Separator of elements in search_path + # This is tricky. The search_path_separator depends on the kind + # of executable: native NT v. cygwin. + # So the user will have to override this. + + # We will assume that files can be viewed by native NT programs. + # Then we must fix the start command/directive, so that the + # NT-native start command of a cmd.exe is used. + # For a pdf-file, "start x.pdf" starts the pdf viewer associated with + # pdf files, so no program name is needed: + $start_NT = "cmd /c start \"\""; + $pdf_previewer = "$start_NT %O %S"; + $ps_previewer = "$start_NT %O %S"; + $ps_previewer_landscape = $ps_previewer; + $dvi_previewer = "$start_NT %O %S"; + $dvi_previewer_landscape = $dvi_previewer; + # Viewer update methods: + # 0 => auto update: viewer watches file (e.g., gv) + # 1 => manual update: user must do something: e.g., click on window. + # (e.g., ghostview, MSWIN previewers, acroread under UNIX) + # 2 => send signal. Number of signal in $dvi_update_signal, + # $ps_update_signal, $pdf_update_signal + # 3 => viewer can't update, because it locks the file and the file + # cannot be updated. (acroread under MSWIN) + $dvi_update_method = 1; + $ps_update_method = 1; + $pdf_update_method = 3; # acroread locks the pdf file + # Use NONE as flag that I am not implementing some commands: + $lpr = + 'NONE $lpr variable is not configured to allow printing of ps files'; + $lpr_dvi = + 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; + $lpr_pdf = + 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; + # The $pscmd below holds a command to list running processes. It + # is used to find the process ID of the viewer looking at the + # current output file. The output of the command must include the + # process number and the command line of the processes, since the + # relevant process is identified by the name of file to be viewed. + # Its use is not essential. + # When the OS is detected as cygwin, there are two possibilities: + # a. Latexmk was run from an NT prompt, but cygwin is in the + # path. Then the cygwin ps command will not see commands + # started from latexmk. So we cannot use it. + # b. Latexmk was started within a cygwin environment. Then + # the ps command works as we need. + # Only the user, not latemk knows which, so we default to not + # using the ps command. The user can override this in a + # configuration file. + $pscmd = + 'NONE $pscmd variable is not configured to detect running processes'; + $pid_position = -1; # offset of PID in output of pscmd. + # Negative means I cannot use ps +} +else { + # Assume anything else is UNIX or clone + + ## Configuration parameters: + + + ## Use first existing case for $tmpdir: + $tmpdir = $ENV{TMPDIR} || '/tmp'; + + ## List of possibilities for the system-wide initialization file. + ## The first one found (if any) is used. + ## Normally on a UNIX it will be in a subdirectory of /opt/local/share or + ## /usr/local/share, depending on the local conventions. + ## But /usr/local/lib/latexmk is put in the list for + ## compatibility with older versions of latexmk. + @rc_system_files = (); + foreach ( 'LatexMk', 'latexmkrc' ) { + push @rc_system_files, + ( "/opt/local/share/latexmk/$_", + "/usr/local/share/latexmk/$_", + "/usr/local/lib/latexmk/$_" ); + } + $search_path_separator = ':'; # Separator of elements in search_path + + $dvi_update_signal = $signo{USR1} + if ( defined $signo{USR1} ); # Suitable for xdvi + $ps_update_signal = $signo{HUP} + if ( defined $signo{HUP} ); # Suitable for gv + $pdf_update_signal = $signo{HUP} + if ( defined $signo{HUP} ); # Suitable for gv + ## default document processing programs. + # Viewer update methods: + # 0 => auto update: viewer watches file (e.g., gv) + # 1 => manual update: user must do something: e.g., click on window. + # (e.g., ghostview, MSWIN previewers, acroread under UNIX) + # 2 => send signal. Number of signal in $dvi_update_signal, + # $ps_update_signal, $pdf_update_signal + # 3 => viewer can't update, because it locks the file and the file + # cannot be updated. (acroread under MSWIN) + # 4 => Run command to update. Command in $dvi_update_command, + # $ps_update_command, $pdf_update_command. + $dvi_previewer = 'start xdvi %O %S'; + $dvi_previewer_landscape = 'start xdvi -paper usr %O %S'; + if ( defined $dvi_update_signal ) { + $dvi_update_method = 2; # xdvi responds to signal to update + } else { + $dvi_update_method = 1; + } +# if ( defined $ps_update_signal ) { +# $ps_update_method = 2; # gv responds to signal to update +# $ps_previewer = 'start gv -nowatch'; +# $ps_previewer_landscape = 'start gv -swap -nowatch'; +# } else { +# $ps_update_method = 0; # gv -watch watches the ps file +# $ps_previewer = 'start gv -watch'; +# $ps_previewer_landscape = 'start gv -swap -watch'; +# } + # Turn off the fancy options for gv. Regular gv likes -watch etc + # GNU gv likes --watch etc. User must configure + $ps_update_method = 0; # gv -watch watches the ps file + $ps_previewer = 'start gv %O %S'; + $ps_previewer_landscape = 'start gv -swap %O %S'; + $pdf_previewer = 'start acroread %O %S'; + $pdf_update_method = 1; # acroread under unix needs manual update + $lpr = 'lpr %O %S'; # Assume lpr command prints postscript files correctly + $lpr_dvi = + 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; + $lpr_pdf = + 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; + # The $pscmd below holds a command to list running processes. It + # is used to find the process ID of the viewer looking at the + # current output file. The output of the command must include the + # process number and the command line of the processes, since the + # relevant process is identified by the name of file to be viewed. + # Uses: + # 1. In preview_continuous mode, to save running a previewer + # when one is already running on the relevant file. + # 2. With xdvi in preview_continuous mode, xdvi must be + # signalled to make it read a new dvi file. + # + # The following works on Solaris, LINUX, HP-UX, IRIX + # Use -f to get full listing, including command line arguments. + # Use -u $ENV{USER} to get all processes started by current user (not just + # those associated with current terminal), but none of other users' + # processes. + # However, the USER environment variable may not exist. Windows uses + # USERNAME instead. (And this propagates to a situation of + # unix-emulation software running under Windows.) + if ( exists $ENV{USER} ) { + $pscmd = "ps -f -u $ENV{USER}"; + } + elsif ( exists $ENV{USERNAME} ) { + $pscmd = "ps -f -u $ENV{USERNAME}"; + } + else { + $pscmd = "ps -f"; + } + $pid_position = 1; # offset of PID in output of pscmd; first item is 0. + if ( $^O eq "linux" ) { + # Ps on Redhat (at least v. 7.2) appears to truncate its output + # at 80 cols, so that a long command string is truncated. + # Fix this with the --width option. This option works under + # other versions of linux even if not necessary (at least + # for SUSE 7.2). + # However the option is not available under other UNIX-type + # systems, e.g., Solaris 8. + # But (19 Aug 2010), the truncation doesn't happen on RHEL4 and 5, + # unless the output is written to a terminal. So the --width + # option is now unnecessary + # $pscmd = "ps --width 200 -f -u $ENV{USER}"; + } + elsif ( $^O eq "darwin" ) { + # OS-X on Macintosh + # open starts command associated with a file. + # For pdf, this is set by default to OS-X's preview, which is suitable. + # Manual update is simply by clicking on window etc, which is OK. + # For ps, this is set also to preview. This works, but since it + # converts the file to pdf and views the pdf file, it doesn't + # see updates, and a refresh cannot be done. This is far from + # optimal. + # For a full installation of MacTeX, which is probably the most common + # on OS-X, an association is created between dvi files and TeXShop. + # This also converts the file to pdf, so again while it works, it + # does not deal with changed dvi files, as far as I can see. + $pdf_previewer = 'open %S'; + $pdf_update_method = 1; # manual + $dvi_previewer = $dvi_previewer_landscape = 'NONE'; + $ps_previewer = $ps_previewer_landscape = 'NONE'; + # Others + $lpr_pdf = 'lpr %O %S'; + $pscmd = "ps -ww -u $ENV{USER}"; + } +} + +## default parameters +$auto_rc_use = 1; # Whether to read rc files automatically +$max_repeat = 5; # Maximum times I repeat latex. Normally + # 3 would be sufficient: 1st run generates aux file, + # 2nd run picks up aux file, and maybe toc, lof which + # contain out-of-date information, e.g., wrong page + # references in toc, lof and index, and unresolved + # references in the middle of lines. But the + # formatting is more-or-less correct. On the 3rd + # run, the page refs etc in toc, lof, etc are about + # correct, but some slight formatting changes may + # occur, which mess up page numbers in the toc and lof, + # Hence a 4th run is conceivably necessary. + # At least one document class (JHEP.cls) works + # in such a way that a 4th run is needed. + # We allow an extra run for safety for a + # maximum of 5. Needing further runs is + # usually an indication of a problem; further + # runs may not resolve the problem, and + # instead could cause an infinite loop. +$clean_ext = ""; # space separated extensions of files that are + # to be deleted when doing cleanup, beyond + # standard set +$clean_full_ext = ""; # space separated extensions of files that are + # to be deleted when doing cleanup_full, beyond + # standard set and those in $clean_ext +@cus_dep_list = (); # Custom dependency list +@default_files = ( '*.tex' ); # Array of LaTeX files to process when + # no files are specified on the command line. + # Wildcards allowed + # Best used for project specific files. +@default_excluded_files = ( ); + # Array of LaTeX files to exclude when using + # @default_files, i.e., when no files are specified + # on the command line. + # Wildcards allowed + # Best used for project specific files. +$texfile_search = ""; # Specification for extra files to search for + # when no files are specified on the command line + # and the @default_files variable is empty. + # Space separated, and wildcards allowed. + # These files are IN ADDITION to *.tex in current + # directory. + # This variable is obsolete, and only in here for + # backward compatibility. + +$fdb_ext = 'fdb_latexmk'; # Extension for the file for latexmk's + # file-database + # Make it long to avoid possible collisions. +$fdb_ver = 3; # Version number for kind of fdb_file. + +$jobname = ''; # Jobname: as with current tex, etc indicates + # basename of generated files. + # Defined so that --jobname=STRING on latexmk's + # command line has same effect as with current + # tex, etc. (If $jobname is non-empty, then + # the --jobname=... option is used on tex.) +$out_dir = ''; # Directory for output files. + # Cf. --output-directory of current (pdf)latex +$aux_dir = ''; # Directory for aux files (log, aux, etc). + # Cf. --aux-directory of current (pdf)latex in MiKTeX. + + +## default flag settings. +$recorder = 1; # Whether to use recorder option on latex/pdflatex +$silent = 0; # Silence latex's messages? +$silence_logfile_warnings = 0; # Do list warnings in log file +$kpsewhich_show = 0; # Show calls to and results from kpsewhich +$landscape_mode = 0; # default to portrait mode +$analyze_input_log_always = 0; # Always analyze .log for input files in the + # <...> and (...) constructions. Otherwise, only + # do the analysis when fls file doesn't exist or is + # out of date. + +# The following two arrays contain lists of extensions (without +# period) for files that are read in during a (pdf)LaTeX run but that +# are generated automatically from the previous run, as opposed to +# being user generated files (directly or indirectly from a custom +# dependency). These files get two kinds of special treatment: +# 1. In clean up, where depending on the kind of clean up, some +# or all of these generated files are deleted. +# (Note that special treatment is given to aux files.) +# 2. In analyzing the results of a run of (pdf)LaTeX, to +# determine if another run is needed. With an error free run, +# a rerun should be provoked by a change in any source file, +# whether a user file or a generated file. But with a run +# that ends in an error, only a change in a user file during +# the run (which might correct the error) should provoke a +# rerun, but a change in a generated file should not. +# These arrays can be user-configured. + +@generated_exts = ( 'aux', 'bcf', 'fls', 'idx', 'ind', 'lof', 'lot', + 'out', 'toc' ); + # N.B. 'out' is generated by hyperref package + +# Which kinds of file do I have requests to make? +# If no requests at all are made, then I will make dvi file +# If particular requests are made then other files may also have to be +# made. E.g., ps file requires a dvi file +$dvi_mode = 0; # No dvi file requested +$postscript_mode = 0; # No postscript file requested +$pdf_mode = 0; # No pdf file requested to be made by pdflatex + # Possible values: + # 0 don't create pdf file + # 1 to create pdf file by pdflatex + # 2 to create pdf file by ps2pdf + # 3 to create pdf file by dvipdf + # 4 to create pdf file by lualatex + # 5 to create pdf file by xelatex + xdvipdfmx +$view = 'default'; # Default preview is of highest of dvi, ps, pdf +$sleep_time = 2; # time to sleep b/w checks for file changes in -pvc mode +$banner = 0; # Non-zero if we have a banner to insert +$banner_scale = 220; # Original default scale +$banner_intensity = 0.95; # Darkness of the banner message +$banner_message = 'DRAFT'; # Original default message +$do_cd = 0; # Do not do cd to directory of source file. + # Thus behave like latex. +$dependents_list = 0; # Whether to display list(s) of dependencies +$dependents_phony = 0; # Whether list(s) of dependencies includes phony targets + # (as with 'gcc -MP'). +$deps_file = '-'; # File for dependency list output. Default stdout. +$rules_list = 0; # Whether to display list(s) of dependencies +@dir_stack = (); # Stack of pushed directories, each of form of + # pointer to array [ cwd, good_cwd ], where + # good_cwd differs from cwd by being converted + # to native MSWin path when cygwin is used. +$cleanup_mode = 0; # No cleanup of nonessential LaTex-related files. + # $cleanup_mode = 0: no cleanup + # $cleanup_mode = 1: full cleanup + # $cleanup_mode = 2: cleanup except for dvi, + # dviF, pdf, ps, psF & xdv +$cleanup_fdb = 0; # No removal of file for latexmk's file-database +$cleanup_only = 0; # When doing cleanup, do not go on to making files +$cleanup_includes_generated = 0; + # Determines whether cleanup deletes files generated by + # custom dependencies +$cleanup_includes_cusdep_generated = 0; + # Determines whether cleanup deletes files generated by + # (pdf)latex (found from \openout lines in log file). +$diagnostics = 0; +$dvi_filter = ''; # DVI filter command +$ps_filter = ''; # Postscript filter command + +$force_mode = 0; # =1 to force processing past errors +$go_mode = 0; # =1 to force processing regardless of time-stamps + # =2 full clean-up first +$preview_mode = 0; +$preview_continuous_mode = 0; +$printout_mode = 0; # Don't print the file + +$show_time = 0; +@timings = (); +$processing_time1 = processing_time(); + +$use_make_for_missing_files = 0; # Whether to use make to try to make missing files. + +# Do we make view file in temporary then move to final destination? +# (To avoid premature updating by viewer). +$always_view_file_via_temporary = 0; # Set to 1 if viewed file is always + # made through a temporary. +$pvc_view_file_via_temporary = 1; # Set to 1 if only in -pvc mode is viewed + # file made through a temporary. + +# State variables initialized here: + +$updated = 0; # Flags when something has been remade + # Used to allow convenient user message in -pvc mode +$waiting = 0; # Flags whether we are in loop waiting for an event + # Used to avoid unnecessary repeated o/p in wait loop + +# Used for some results of parsing log file: +$reference_changed = 0; +$mult_defined = 0; +$bad_reference = 0; +$bad_citation = 0; + +# Cache of expensive-to-compute state variables, e.g., cwd in form +# fixed to deal with cygwin issues. +%cache = (); +&cache_good_cwd; + +# Set search paths for includes. +# Set them early so that they can be overridden +$BIBINPUTS = $ENV{'BIBINPUTS'}; +if (!$BIBINPUTS) { $BIBINPUTS = '.'; } + +# Convert search paths to arrays: +# If any of the paths end in '//' then recursively search the +# directory. After these operations, @BIBINPUTS should +# have all the directories that need to be searched + +@BIBINPUTS = find_dirs1( $BIBINPUTS ); + + +###################################################################### +###################################################################### +# +# ??? UPDATE THE FOLLOWING!! +# +# We will need to determine whether source files for runs of various +# programs are out of date. In a normal situation, this is done by +# asking whether the times of the source files are later than the +# destination files. But this won't work for us, since a common +# situation is that a file is written on one run of latex, for +# example, and read back in on the next run (e.g., an .aux file). +# Some situations of this kind are standard in latex generally; others +# occur with particular macro packages or with particular +# postprocessors. +# +# The correct criterion for whether a source is out-of-date is +# therefore NOT that its modification time is later than the +# destination file, but whether the contents of the source file have +# changed since the last successful run. This also handles the case +# that the user undoes some changes to a source file by replacing the +# source file by reverting to an earlier version, which may well have +# an older time stamp. Since a direct comparison of old and new files +# would involve storage and access of a large number of backup files, +# we instead use the md5 signature of the files. (Previous versions +# of latexmk used the backup file method, but restricted to the case +# of .aux and .idx files, sufficient for most, but not all, +# situations.) +# +# We will have a database of (time, size, md5) for the relevant +# files. If the time and size of a file haven't changed, then the file +# is assumed not to have changed; this saves us from having to +# determine its md5 signature, which would involve reading the whole +# file, which is naturally time-consuming, especially if network file +# access to a server is needed, and many files are involved, when most +# of them don't change. It is of course possible to change a file +# without changing its size, but then to adjust its timestamp +# to what it was previously; this requires a certain amount of +# perversity. We can safely assume that if the user edits a file or +# changes its contents, then the file's timestamp changes. The +# interesting case is that the timestamp does change, because the file +# has actually been written to, but that the contents do not change; +# it is for this that we use the md5 signature. However, since +# computing the md5 signature involves reading the whole file, which +# may be large, we should avoid computing it more than necessary. +# +# So we get the following structure: +# +# 1. For each relevant run (latex, pdflatex, each instance of a +# custom dependency) we have a database of the state of the +# source files that were last used by the run. +# 2. On an initial startup, the database for a primary tex file +# is read that was created by a previous run of latex or +# pdflatex, if this exists. +# 3. If the file doesn't exist, then the criterion for +# out-of-dateness for an initial run is that it goes by file +# timestamps, as in previous versions of latexmk, with due +# (dis)regard to those files that are known to be generated by +# latex and re-read on the next run. +# 4. Immediately before a run, the database is updated to +# represent the current conditions of the run's source files. +# 5. After the run, it is determined whether any of the source +# files have changed. This covers both files written by the +# run, which are therefore in a dependency loop, and files that +# the user may have updated during the run. (The last often +# happens when latex takes a long time, for a big document, +# and the user makes edits before latex has finished. This is +# particularly prevalent when latexmk is used with +# preview-continuous mode.) +# 6. In the case of latex or pdflatex, the custom dependencies +# must also be checked and redone if out-of-date. +# 7. If any source files have changed, the run is redone, +# starting at step 1. +# 8. There is naturally a limit on the number of reruns, to avoid +# infinite loops from bugs and from pathological or unforeseen +# conditions. +# 9. After the run is done, the run's file database is updated. +# (By hypothesis, the sizes and md5s are correct, if the run +# is successful.) +# 10. To allow reuse of data from previous runs, the file database +# is written to a file after every complete set of passes +# through latex or pdflatex. (Note that there is separate +# information for latex and pdflatex; the necessary +# information won't coincide: Out-of-dateness for the files +# for each program concerns the properties of the files when +# the other program was run, and the set of source files could +# be different, e.g., for graphics files.) +# +# We therefore maintain the following data structures.: +# +# a. For each run (latex, pdflatex, each custom dependency) a +# database is maintained. This is a hash from filenames to a +# reference to an array: [time, size, md5]. The semantics of +# the database is that it represents the state of the source +# files used in the run. During a run it represents the state +# immediately before the run; after a run, with all reruns, it +# represents the state of the files used, modified by having +# the latest timestamps for generated files. +# b. There is a global database for all files, which represents +# the current state. This saves having to recompute the md5 +# signatures of a changed file used in more than one run +# (e.g., latex and pdflatex). +# c. Each of latex and pdflatex has a list of the relevant custom +# dependencies. +# +# In all the following a fdb-hash is a hash of the form: +# filename -> [time, size, md5] +# If a file is found to disappear, its entry is removed from the hash. +# In returns from fdb access routines, a size entry of -1 indicates a +# non-existent file. + + +# List of known rules. Rule types: primary, +# external (calls program), internal (calls routine), cusdep. + +%possible_primaries = ( 'latex' => 'primary', 'pdflatex' => 'primary', + 'lualatex' => 'primary', 'xelatex' => 'primary' ); +%primaries = (); # Hash of rules for primary part of make. Keys are + # currently 'latex', 'pdflatex' or both; also 'lualatex' + # and 'xelatex'. Value is currently irrelevant. + # Use hash for ease of lookup + # Make remove this later, if use rdb_makeB + +# Hashes, whose keys give names of particular kinds of rule. We use +# hashes for ease of lookup. +%possible_one_time = ( 'view' => 1, 'print' => 1, 'update_view' => 1, ); +%requested_filerules = (); # Hash for rules corresponding to requested files. + # The keys are the rulenames and the value is + # currently irrelevant. +%one_time = (); # Hash for requested one-time-only rules, currently + # possible values 'print' and 'view'. + + +%rule_db = (); # Database of all rules: + # Hash: rulename -> [array of rule data] + # Rule data: + # 0: [ cmd_type, ext_cmd, int_cmd, test_kind, + # source, dest, base, + # out_of_date, out_of_date_user, + # time_of_last_run, time_of_last_file_check, + # changed + # last_result, last_message, + # default_extra_generated + # ] + # where + # cmd_type is 'primary', 'external', or 'cusdep' + # ext_cmd is string for associated external command + # with substitutions (%D for destination, %S + # for source, %B for base of current rule, + # %R for base of primary tex file, %T for + # texfile name, %O for options, + # %Y for $aux_dir1, and %Z for $out_dir1 + # int_cmd specifies any internal command to be + # used to implement the application of the + # rule. If this is present, it overrides + # the external command, and it is the + # responsibility of the perl subroutine + # specified in intcmd to execute the + # external command if this is appropriate. + # This variable intcmd is a reference to an array, + # $$intcmd[0] = internal routine + # $$intcmd[1...] = its arguments (if any) + # test_kind specifies method of determining + # whether a file is out-of-date: + # 0 for never + # 1 for usual: whether there is a source + # file change + # 2 for dest earlier than source + # 3 for method 2 at first run, 1 thereafter + # (used when don't have file data from + # previous run). + # source = name of primary source file, if any + # dest = name of primary destination file, + # if any + # base = base name, if any, of files for + # this rule + # out_of_date = 1 if it has been detected that + # this rule needs to be run + # (typically because a source + # file has changed). + # 0 otherwise + # out_of_date_user is like out_of_date, except + # that the detection of out-of-dateness + # has been made from a change of a + # putative user file, i.e., one that is + # not a generated file (e.g., aux). This + # kind of out-of-dateness should provoke a + # rerun whether or not there was an error + # during a run of (pdf)LaTeX. Normally, + # if there is an error, one should wait + # for the user to correct the error. But + # it is possible the error condition is + # already corrected during the run, e.g., + # by the user changing a source file in + # response to an error message. + # time_of_last_run = time that this rule was + # last applied. (In standard units + # from perl, to be directly compared + # with file modification times.) + # time_of_last_file_check = last time that a check + # was made for changes in source files. + # changed flags whether special changes have been made + # that require file-existence status to be ignored + # last_result is + # -1 if no run has been made, + # 0 if the last run was successful + # 1 if last run was successful, but + # failed to create an output file + # 2 if last run failed + # 200 if last run gave a warning that is + # important enough to be reported with + # the error summary. The warning + # message is stored in last_message. + # last_message is error message for last run + # default_extra_generated is a reference to an array + # of specifications of extra generated files (beyond + # the main dest file. Standard place holders are used. + # Example ['%Y%R.log'] for (pdf)latex, and ['%R.blg'] + # for bibtex. (There's no need for '%R.aux', here, + # since such generated files are detected dynamically.) + # 1: {Hash sourcefile -> [source-file data] } + # Source-file data array: + # 0: time + # 1: size + # 2: md5 + # 3: name of rule to make this file + # 4: whether the file is of the kind made by epstopdf.sty + # during a primary run. It will have been read during + # the run, so that even though the file changes during + # a primary run, there is no need to trigger another + # run because of this. + # Size and md5 correspond to the values at the last run. + # But time may be updated to correspond to the time + # for the file, if the file is otherwise unchanged. + # This saves excessive md5 calculations, which would + # otherwise be done everytime the file is checked, + # in the following situation: + # When the file has been rewritten after a run + # has started (commonly aux, bbl files etc), + # but the actual file contents haven't + # changed. Then because the filetime has + # changed, on every file-change check latexmk + # would normally redo the md5 calculation to + # test for actual changes. Once one such + # check is done, and the contents are + # unchanged, later checks are superfluous, and + # can be avoided by changing the file's time + # in the source-file list. + # 2: {Hash generated_file -> 1 } + # This lists all generated files; the values + # are currently unused, only the keys + +%fdb_current = (); # Fdb-hash for all files used. + + +# User's home directory +$HOME = ''; +if (exists $ENV{'HOME'} ) { + $HOME = $ENV{'HOME'}; +} +elsif (exists $ENV{'USERPROFILE'} ) { + $HOME = $ENV{'USERPROFILE'}; +} +# XDG configuration home +$XDG_CONFIG_HOME = ''; +if (exists $ENV{'XDG_CONFIG_HOME'} ) { + $XDG_CONFIG_HOME = $ENV{'XDG_CONFIG_HOME'}; +} +elsif ($HOME ne '') { + if ( -d "$HOME/.config") { + $XDG_CONFIG_HOME = "$HOME/.config"; + } +} + + +#================================================== + +# Options that are to be obeyed before rc files are read: + +foreach $_ ( @ARGV ) +{ + if (/^-{1,2}norc$/ ) { + $auto_rc_use = 0; + } +} + +#================================================== +## Read rc files with this subroutine + +sub read_first_rc_file_in_list { + foreach my $rc_file ( @_ ) { + #print "===Testing for rc file \"$rc_file\" ...\n"; + if ( -d $rc_file ) { + warn "$My_name: I have found a DIRECTORY named \"$rc_file\".\n", + " Have you perhaps misunderstood latexmk's documentation?\n", + " This name is normally used for a latexmk configuration (rc) file,\n", + " and in that case it should be a regular text file, not a directory.\n"; + } + elsif ( -e $rc_file ) { + #print "===Reading rc file \"$rc_file\" ...\n"; + process_rc_file( $rc_file ); + return; + } + } +} + +# Note that each rc file may unset $auto_rc_use to +# prevent lower-level rc files from being read. +# So test on $auto_rc_use in each case. +if ( $auto_rc_use ) { + # System rc file: + read_first_rc_file_in_list( @rc_system_files ); +} +if ( $auto_rc_use && ($HOME ne "" ) ) { + # User rc file: + @user_rc = (); + if ( $XDG_CONFIG_HOME ) { + push @user_rc, "$XDG_CONFIG_HOME/latexmk/latexmkrc"; + } + # N.B. $HOME equals "" if latexmk couldn't determine a home directory. + # In that case, we shouldn't look for an rc file there. + if ( $HOME ) { + push @user_rc, "$HOME/.latexmkrc"; + } + read_first_rc_file_in_list( @user_rc ); +} +if ( $auto_rc_use ) { + # Rc file in current directory: + read_first_rc_file_in_list( "latexmkrc", ".latexmkrc" ); +} + +## Process command line args. +@command_line_file_list = (); +$bad_options = 0; + +while ($_ = $ARGV[0]) +{ + # Make -- and - equivalent at beginning of option, + # but save original for possible use in (pdf)latex command line + $original = $_; + s/^--/-/; + shift; + if ( /^-aux-directory=(.*)$/ || /^-auxdir=(.*)$/ ) { + $aux_dir = $1; + } + elsif (/^-bibtex$/) { $bibtex_use = 2; } + elsif (/^-bibtex-$/) { $bibtex_use = 0; } + elsif (/^-nobibtex$/) { $bibtex_use = 0; } + elsif (/^-bibtex-cond$/) { $bibtex_use = 1; } + elsif (/^-c$/) { $cleanup_mode = 2; $cleanup_fdb = 1; $cleanup_only = 1; } + elsif (/^-C$/ || /^-CA$/ ) { $cleanup_mode = 1; $cleanup_fdb = 1; $cleanup_only = 1; } + elsif (/^-CF$/) { $cleanup_fdb = 1; } + elsif (/^-cd$/) { $do_cd = 1; } + elsif (/^-cd-$/) { $do_cd = 0; } + elsif (/^-commands$/) { &print_commands; exit; } + elsif (/^-d$/) { $banner = 1; } + elsif (/^-dependents$/ || /^-deps$/ || /^-M$/ ) { $dependents_list = 1; } + elsif (/^-nodependents$/ || /^-dependents-$/ || /^-deps-$/) { $dependents_list = 0; } + elsif (/^-deps-out=(.*)$/) { + $deps_file = $1; + $dependents_list = 1; + } + elsif (/^-diagnostics/) { $diagnostics = 1; } + elsif (/^-dvi$/) { $dvi_mode = 1; } + elsif (/^-dvi-$/) { $dvi_mode = 0; } + elsif (/^-f$/) { $force_mode = 1; } + elsif (/^-f-$/) { $force_mode = 0; } + elsif (/^-g$/) { $go_mode = 1; } + elsif (/^-g-$/) { $go_mode = 0; } + elsif (/^-gg$/) { + $go_mode = 2; $cleanup_mode = 1; $cleanup_fdb = 1; $cleanup_only = 0; + } + elsif ( /^-h$/ || /^-help$/ ) { &print_help; exit;} + elsif (/^-jobname=(.*)$/) { + $jobname = $1; + } + elsif (/^-l$/) { $landscape_mode = 1; } + elsif (/^-l-$/) { $landscape_mode = 0; } + elsif (/^-latex=(.*)$/) { + $latex = $1; + } + elsif (/^-latexoption=(.*)$/) { + push @extra_latex_options, $1; + push @extra_pdflatex_options, $1; + push @extra_lualatex_options, $1; + push @extra_xelatex_options, $1; + } + elsif ( /^-logfilewarninglist$/ || /^-logfilewarnings$/ ) + { $silence_logfile_warnings = 0; } + elsif ( /^-logfilewarninglist-$/ || /^-logfilewarnings-$/ ) + { $silence_logfile_warnings = 1; } +# See above for -M + elsif (/^-MF$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No file name specified after -MF switch"); + } + $deps_file = $ARGV[0]; + shift; + } + elsif ( /^-MP$/ ) { $dependents_phony = 1; } + elsif (/^-new-viewer$/) { + $new_viewer_always = 1; + } + elsif (/^-new-viewer-$/) { + $new_viewer_always = 0; + } + elsif (/^-norc$/ ) { + $auto_rc_use = 0; + # N.B. This has already been obeyed. + } + elsif ( /^-output-directory=(.*)$/ ||/^-outdir=(.*)$/ ) { + $out_dir = $1; + } + elsif (/^-p$/) { $printout_mode = 1; + $preview_continuous_mode = 0; # to avoid conflicts + $preview_mode = 0; + } + elsif (/^-p-$/) { $printout_mode = 0; } + elsif (/^-pdf$/) { $pdf_mode = 1; } + elsif (/^-pdf-$/) { $pdf_mode = 0; } + elsif (/^-pdfdvi$/){ $pdf_mode = 3; } + elsif (/^-pdflua$/){ $pdf_mode = 4; } + elsif (/^-pdfxe$/) { $pdf_mode = 5; } +# elsif (/^-pdflatex$/) { +# $pdflatex = "pdflatex %O %S"; +# $pdf_mode = 1; +# $dvi_mode = $postscript_mode = 0; +# } + elsif (/^-pdflatex=(.*)$/) { + $pdflatex = $1; + } + elsif (/^-pdfps$/) { $pdf_mode = 2; } + elsif (/^-print=(.*)$/) { + $value = $1; + if ( $value =~ /^dvi$|^ps$|^pdf$|^auto$/ ) { + $print_type = $value; + $printout_mode = 1; + } + else { + &exit_help("$My_name: unknown print type '$value' in option '$_'"); + } + } + elsif (/^-ps$/) { $postscript_mode = 1; } + elsif (/^-ps-$/) { $postscript_mode = 0; } + elsif (/^-pv$/) { $preview_mode = 1; + $preview_continuous_mode = 0; # to avoid conflicts + $printout_mode = 0; + } + elsif (/^-pv-$/) { $preview_mode = 0; } + elsif (/^-pvc$/) { $preview_continuous_mode = 1; + $force_mode = 0; # So that errors do not cause loops + $preview_mode = 0; # to avoid conflicts + $printout_mode = 0; + } + elsif (/^-pvc-$/) { $preview_continuous_mode = 0; } + elsif (/^-recorder$/ ){ $recorder = 1; } + elsif (/^-recorder-$/ ){ $recorder = 0; } + elsif (/^-rules$/ ) { $rules_list = 1; } + elsif (/^-norules$/ || /^-rules-$/ ) { $rules_list = 0; } + elsif (/^-showextraoptions$/) { + print "List of extra latex and pdflatex options recognized by $my_name.\n", + "These are passed as is to (pdf)latex. They may not be recognized by\n", + "particular versions of (pdf)latex. This list is a combination of those\n", + "for TeXLive and MikTeX.\n", + "\n", + "Note that in addition to the options in this list, there are several\n", + "options known to the (pdf)latex programs that are also recognized by\n", + "latexmk and trigger special behavior by latexmk. Since these options\n", + "appear in the main list given by running 'latexmk --help', they do not\n", + "appear in the following list\n", + "NOTE ALSO: Not all of these options are supported by all versions of (pdf)latex.\n", + "\n"; + foreach $option ( sort( keys %allowed_latex_options, keys %allowed_latex_options_with_arg ) ) { + if (exists $allowed_latex_options{$option} ) { print " $allowed_latex_options{$option}\n"; } + if (exists $allowed_latex_options_with_arg{$option} ) { print " $allowed_latex_options_with_arg{$option}\n"; } + } + exit; + } + elsif (/^-silent$/ || /^-quiet$/ ){ $silent = 1; } + elsif (/^-time$/) { $show_time = 1;} + elsif (/^-time-$/) { $show_time = 0;} + elsif (/^-use-make$/) { $use_make_for_missing_files = 1; } + elsif (/^-use-make-$/) { $use_make_for_missing_files = 0; } + elsif (/^-v$/ || /^-version$/) { + print "\n$version_details. Version $version_num\n"; + exit; + } + elsif (/^-verbose$/) { $silent = 0; } + elsif (/^-view=default$/) { $view = "default";} + elsif (/^-view=dvi$/) { $view = "dvi";} + elsif (/^-view=none$/) { $view = "none";} + elsif (/^-view=ps$/) { $view = "ps";} + elsif (/^-view=pdf$/) { $view = "pdf"; } + elsif (/^-lualatex$/) { + $pdf_mode = 4; + $dvi_mode = $postscript_mode = 0; + } + elsif (/^-xelatex$/) { + $pdf_mode = 5; + $dvi_mode = $postscript_mode = 0; + } + elsif (/^-e$/) { + if ( $#ARGV < 0 ) { + &exit_help( "No code to execute specified after -e switch"); + } + execute_code_string( $ARGV[0] ); + shift; + } + elsif (/^-r$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No RC file specified after -r switch"); + } + if ( -e $ARGV[0] ) { + process_rc_file( $ARGV[0] ); + } + else { + die "$My_name: RC file [$ARGV[0]] does not exist\n"; + } + shift; + } + elsif (/^-bm$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No message specified after -bm switch"); + } + $banner = 1; $banner_message = $ARGV[0]; + shift; + } + elsif (/^-bi$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No intensity specified after -bi switch"); + } + $banner_intensity = $ARGV[0]; + shift; + } + elsif (/^-bs$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No scale specified after -bs switch"); + } + $banner_scale = $ARGV[0]; + shift; + } + elsif (/^-dF$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No dvi filter specified after -dF switch"); + } + $dvi_filter = $ARGV[0]; + shift; + } + elsif (/^-pF$/) { + if ( $ARGV[0] eq '' ) { + &exit_help( "No ps filter specified after -pF switch"); + } + $ps_filter = $ARGV[0]; + shift; + } + elsif ( ( exists( $allowed_latex_options{$_} ) ) + || ( /^(-.+)=/ && exists( $allowed_latex_options_with_arg{$1} ) ) + ) + { + push @extra_latex_options, $original; + push @extra_pdflatex_options, $original; + push @extra_lualatex_options, $original; + push @extra_xelatex_options, $original; + } + elsif (/^-/) { + warn "$My_name: $_ bad option\n"; + $bad_options++; + } + else { + push @command_line_file_list, $_ ; + } +} + +if ( $bad_options > 0 ) { + &exit_help( "Bad options specified" ); +} + +warn "$My_name: This is $version_details, version: $version_num.\n", + unless $silent; + +if ( ($out_dir ne '') && ($aux_dir eq '') ){ + $aux_dir = $out_dir; +} + +# Versions terminating in directory/path separator +$out_dir1 = $out_dir; +$aux_dir1 = $aux_dir; +foreach ( $aux_dir1, $out_dir1 ) { + if ( ($_ ne '') && ! m([\\/\:]$) ) { + $_ .= '/'; + } +} + +# At least one widely package (revtex4-1) generates a bib file +# (which is used in revtex4-1 for putting footnotes in the reference +# list), and bibtex must be run to use it. But latexmk needs to +# determine the existence of the bib file by use of kpsewhich, otherwise +# there is an error. So cope with this situation (and any analogous +# cases by adding the aux_dir to the relevant path search environment +# variables. BIBINPUTS seems to be the only one currently affected. +foreach ( 'BIBINPUTS' ) { + if ( exists $ENV{$_} ) { + $ENV{$_} = $aux_dir.$search_path_separator.$ENV{$_}; + } + else { + $ENV{$_} = $aux_dir.$search_path_separator; + } +} + + +if ($bibtex_use > 1) { + push @generated_exts, 'bbl'; +} + +# For backward compatibility, convert $texfile_search to @default_files +# Since $texfile_search is initialized to "", a nonzero value indicates +# that an initialization file has set it. +if ( $texfile_search ne "" ) { + @default_files = split /\s+/, "*.tex $texfile_search"; +} + +#Glob the filenames command line if the script was not invoked under a +# UNIX-like environment. +# Cases: (1) MS/MSwin native Glob +# (OS detected as MSWin32) +# (2) MS/MSwin cygwin Glob [because we do not know whether +# the cmd interpreter is UNIXy (and does glob) or is +# native MS-Win (and does not glob).] +# (OS detected as cygwin) +# (3) UNIX Don't glob (cmd interpreter does it) +# (Currently, I assume this is everything else) +if ( ($^O eq "MSWin32") || ($^O eq "cygwin") ) { + # Preserve ordering of files + @file_list = glob_list1(@command_line_file_list); +#print "A1:File list:\n"; +#for ($i = 0; $i <= $#file_list; $i++ ) { print "$i: '$file_list[$i]'\n"; } +} +else { + @file_list = @command_line_file_list; +} +@file_list = uniq1( @file_list ); + + +# Check we haven't selected mutually exclusive modes. +# Note that -c overrides all other options, but doesn't cause +# an error if they are selected. +if (($printout_mode && ( $preview_mode || $preview_continuous_mode )) + || ( $preview_mode && $preview_continuous_mode )) +{ + # Each of the options -p, -pv, -pvc turns the other off. + # So the only reason to arrive here is an incorrect inititalization + # file, or a bug. + &exit_help( "Conflicting options (print, preview, preview_continuous) selected"); +} + +if ( @command_line_file_list ) { + # At least one file specified on command line (before possible globbing). + if ( !@file_list ) { + &exit_help( "Wildcards in file names didn't match any files"); + } +} +else { + # No files specified on command line, try and find some + # Evaluate in order specified. The user may have some special + # for wanting processing in a particular order, especially + # if there are no wild cards. + # Preserve ordering of files + my @file_list1 = uniq1( glob_list1(@default_files) ); + my @excluded_file_list = uniq1( glob_list1(@default_excluded_files) ); + # Make hash of excluded files, for easy checking: + my %excl = (); + foreach my $file (@excluded_file_list) { + $excl{$file} = ''; + } + foreach my $file (@file_list1) { + push( @file_list, $file) unless ( exists $excl{$file} ); + } + if ( !@file_list ) { + &exit_help( "No file name specified, and I couldn't find any"); + } +} + +$num_files = $#file_list + 1; +$num_specified = $#command_line_file_list + 1; + +#print "Command line file list:\n"; +#for ($i = 0; $i <= $#command_line_file_list; $i++ ) { print "$i: '$command_line_file_list[$i]'\n"; } +#print "File list:\n"; +#for ($i = 0; $i <= $#file_list; $i++ ) { print "$i: '$file_list[$i]'\n"; } + + +# If selected a preview-continuous mode, make sure exactly one filename was specified +if ($preview_continuous_mode && ($num_files != 1) ) { + if ($num_specified > 1) { + &exit_help( + "Need to specify exactly one filename for ". + "preview-continuous mode\n". + " but $num_specified were specified" + ); + } + elsif ($num_specified == 1) { + &exit_help( + "Need to specify exactly one filename for ". + "preview-continuous mode\n". + " but wildcarding produced $num_files files" + ); + } + else { + &exit_help( + "Need to specify exactly one filename for ". + "preview-continuous mode.\n". + " Since none were specified on the command line, I looked for \n". + " files in '@default_files'.\n". + " But I found $num_files files, not 1." + ); + } +} + +# If selected jobname, can only apply that to one file: +if ( ($jobname ne '') && ($num_files > 1) ) { + &exit_help( + "Need to specify at most one filename if ". + "jobname specified, \n". + " but $num_files were found (after defaults and wildcarding)." + ); +} + + +# Normalize the commands, to have place-holders for source, dest etc: +&fix_cmds; + +# Add common options +add_option( $latex_default_switches, \$latex ); +add_option( $pdflatex_default_switches, \$pdflatex ); +add_option( $lualatex_default_switches, \$lualatex ); +add_option( $xelatex_default_switches, \$xelatex ); + +foreach (@extra_latex_options) { add_option( $_, \$latex ); } +foreach (@extra_pdflatex_options) { add_option( $_, \$pdflatex ); } +foreach (@extra_lualatex_options) { add_option( $_, \$lualatex ); } +foreach (@extra_xelatex_options) { add_option( $_, \$xelatex ); } + + +# If landscape mode, change dvips processor, and the previewers: +if ( $landscape_mode ) +{ + $dvips = $dvips_landscape; + $dvi_previewer = $dvi_previewer_landscape; + $ps_previewer = $ps_previewer_landscape; +} + +if ( $silent ) { + add_option( "$latex_silent_switch", \$latex ); + add_option( "$pdflatex_silent_switch", \$pdflatex ); + add_option( "$lualatex_silent_switch", \$lualatex ); + add_option( "$xelatex_silent_switch", \$xelatex ); + add_option( "$biber_silent_switch", \$biber ); + add_option( "$bibtex_silent_switch", \$bibtex ); + add_option( "$makeindex_silent_switch", \$makeindex ); + add_option( "$dvipdf_silent_switch", \$dvipdf ); + add_option( "$dvips_silent_switch", \$dvips ); + add_option( "$xdvipdfmx_silent_switch", \$xdvipdfmx ); +} + +if ( $recorder ) { + add_option( "-recorder", \$latex, \$pdflatex, \$lualatex, \$xelatex ); +} + +# If the output and/or aux directories are specified, fix the (pdf)latex +# commands to use them. +# N.B. We'll ensure that the directories actually exist only after a +# possible cd to the document directory, since the directories can be +# relative to the document. + +if ( $out_dir ) { + add_option( "-output-directory=\"$out_dir\"", + \$latex, \$pdflatex, \$lualatex, \$xelatex ); +} +if ( $aux_dir && ($aux_dir ne $out_dir) ) { + # N.B. If $aux_dir and $out_dir are the same, then the -output-directory + # option is sufficient, especially because the -aux-directory exists + # only in MiKTeX, not in TeXLive. + add_option( "-aux-directory=\"$aux_dir\"", + \$latex, \$pdflatex, \$lualatex, \$xelatex ); +} + +if ( $jobname ne '' ) { + $jobstring = "--jobname=\"$jobname\""; + add_option( "$jobstring", \$latex, \$lualatex, \$pdflatex, \$xelatex ); +} + +# Which kind of file do we preview? +if ( $view eq "default" ) { + # If default viewer requested, use "highest" of dvi, ps and pdf + # that was requested by user. + # No explicit request means view dvi. + $view = "dvi"; + if ( $postscript_mode ) { $view = "ps"; } + if ( $pdf_mode ) { $view = "pdf"; } +} + +# Make sure we make the kind of file we want to view: +if ($view eq 'dvi') { $dvi_mode = 1; } +if ($view eq 'ps') { $postscript_mode = 1; } +if ( ($view eq 'pdf') && ($pdf_mode == 0) ) { + $pdf_mode = 1; +} + +# Make sure that we make something if all requests are turned off +if ( ! ( $dvi_mode || $pdf_mode || $postscript_mode || $printout_mode) ) { + print "No specific requests made, so default to dvi by latex\n"; + $dvi_mode = 1; +} + +# Set new-style requested rules: +if ( $dvi_mode ) { $requested_filerules{'latex'} = 1; } +if ( $pdf_mode == 1 ) { $requested_filerules{'pdflatex'} = 1; } +elsif ( $pdf_mode == 2 ) { + $requested_filerules{'latex'} = 1; + $requested_filerules{'dvips'} = 1; + $requested_filerules{'ps2pdf'} = 1; +} +elsif ( $pdf_mode == 3 ) { + $requested_filerules{'latex'} = 1; + $requested_filerules{'dvipdf'} = 1; +} +elsif ( $pdf_mode == 4 ) { + $requested_filerules{'lualatex'} = 1; +} +elsif ( $pdf_mode == 5 ) { + $requested_filerules{'xelatex'} = 1; + $requested_filerules{'xdvipdfmx'} = 1; +} +if ( $postscript_mode ) { + $requested_filerules{'latex'} = 1; + $requested_filerules{'dvips'} = 1; +} +if ($print_type eq 'auto') { + if ( $postscript_mode ) { $print_type = 'ps'; } + elsif ( $pdf_mode ) { $print_type = 'pdf'; } + elsif ( $dvi_mode ) { $print_type = 'dvi'; } + else { $print_type = 'none'; } +} +if ( $printout_mode ) { + $one_time{'print'} = 1; + if ($print_type eq 'none'){ + warn "$My_name: You have requested printout, but \$print_type is set to 'none'\n"; + } +} +if ( $preview_continuous_mode || $preview_mode ) { $one_time{'view'} = 1; } +if ( length($dvi_filter) != 0 ) { $requested_filerules{'dvi_filter'} = 1; } +if ( length($ps_filter) != 0 ) { $requested_filerules{'ps_filter'} = 1; } +if ( $banner ) { $requested_filerules{'dvips'} = 1; } + + +if ( $pdf_mode == 2 ) { + # We generate pdf from ps. Make sure we have the correct kind of ps. + add_option( "$dvips_pdf_switch", \$dvips ); +} + +# Note sleep has granularity of 1 second. +# Sleep periods 0 < $sleep_time < 1 give zero delay, +# which is probably not what the user intended. +# Sleep periods less than zero give infinite delay +if ( $sleep_time < 0 ) { + warn "$My_name: Correcting negative sleep_time to 1 sec.\n"; + $sleep_time = 1; +} +elsif ( ($sleep_time < 1) && ( $sleep_time != 0 ) ) { + warn "$My_name: Correcting nonzero sleep_time of less than 1 sec to 1 sec.\n"; + $sleep_time = 1; +} +elsif ( $sleep_time == 0 ) { + warn "$My_name: sleep_time was configured to zero.\n", + " Do you really want to do this? It will give 100% CPU usage.\n"; +} + +# Make convenient forms for lookup. +# Extensions always have period. + +# Convert @generated_exts to a hash for ease of look up and deletion +# Keep extension without period! +%generated_exts_all = (); +foreach (@generated_exts ) { + $generated_exts_all{$_} = 1; +} + +if ($aux_dir) { + # Ensure $aux_dir is in TEXINPUTS search path. + # This is used by dvips for files generated by mpost. + if ( ! exists $ENV{TEXINPUTS} ) { + # Note the trailing ":" which ensures that the last item + # in the list of paths is the empty path, which actually + # means the default path, i.e., the following means that + # the TEXINPUTS search path is $aux_dir and the standard + # value. + $ENV{TEXINPUTS} = $aux_dir.$search_path_separator; + } + elsif ( $ENV{TEXINPUTS} !~ /$aux_dir$search_path_separator/ ) { + $ENV{TEXINPUTS} = $aux_dir.$search_path_separator.$ENV{TEXINPUTS}; + } +} + +$quell_uptodate_msgs = $silent; + # Whether to quell informational messages when files are uptodate + # Will turn off in -pvc mode + +$failure_count = 0; +@failed_primaries = (); + +if ($deps_file eq '' ) { + # Standardize name used for stdout + $deps_file = '-'; +} + +# In non-pvc mode, the dependency list is global to all processed TeX files, +# so we open a single file here, and add items to it after processing each file +# But in -pvc mode, the dependency list should be written after round of +# processing the single TeX file (as if each round were a separate run of +# latexmk). There's undoubtedly some non-optimal structuring here! +if ( $dependents_list && ! $preview_continuous_mode ) { + $deps_handle = new FileHandle "> $deps_file"; + if (! defined $deps_handle ) { + die "Cannot open '$deps_file' for output of dependency information\n"; + } +} + +# Remove leading and trailing space in the following space-separated lists, +# and collapse multiple spaces to one, +# to avoid getting incorrect blank items when they are split. +foreach ($clean_ext, $clean_full_ext) { s/^\s+//; s/\s+$//; s/\s+/ /g; } + + +FILE: +foreach $filename ( @file_list ) +{ + # Global variables for making of current file: + $updated = 0; + $failure = 0; # Set nonzero to indicate failure at some point of + # a make. Use value as exit code if I exit. + $failure_msg = ''; # Indicate reason for failure + + if ( $do_cd ) { + ($filename, $path) = fileparse( $filename ); + warn "$My_name: Changing directory to '$path'\n"; + pushd( $path ); + } + else { + $path = ''; + } + + # Ensure the output/auxiliary directories exist, if need be + if ( $out_dir ) { + if ( ! -e $out_dir ) { + warn "$My_name: making output directory '$out_dir'\n" + if ! $silent; + make_path $out_dir; + } + elsif ( ! -d $out_dir ) { + warn "$My_name: you requested output directory '$out_dir',\n", + " but an ordinary file of the same name exists, which will\n", + " probably give an error later\n"; + } + } + + if ( $aux_dir && ($aux_dir ne $out_dir) ) { + # N.B. If $aux_dir and $out_dir are the same, then the -output-directory + # option is sufficient, especially because the -aux-directory exists + # only in MiKTeX, not in TeXLive. + if ( ! -e $aux_dir ) { + warn "$My_name: making auxiliary directory '$aux_dir'\n" + if ! $silent; + make_path $aux_dir; + } + elsif ( ! -d $aux_dir ) { + warn "$My_name: you requested aux directory '$aux_dir',\n", + " but an ordinary file of the same name exists, which will\n", + " probably give an error later\n"; + } + } + + ## remove extension from filename if was given. + if ( find_basename($filename, $root_filename, $texfile_name) ) + { + if ( $force_mode ) { + warn "$My_name: Could not find file [$texfile_name]\n"; + } + else { + &ifcd_popd; + &exit_msg1( "Could not find file [$texfile_name]", + 11); + } + } + if ($jobname ne '' ) { + $root_filename = $jobname; + } + + $aux_main = "$aux_dir1$root_filename.aux"; + $log_name = "$aux_dir1$root_filename.log"; + $fdb_name = "$aux_dir1$root_filename.$fdb_ext"; + + # Initialize basic dependency information: + + # For use under error conditions: + @default_includes = ($texfile_name, $aux_main); + + # Initialize rule database. + # ?? Should I also initialize file database? + %rule_list = (); + &rdb_make_rule_list; + &rdb_set_rules( \%rule_list, \%extra_rule_spec ); + + if ( $cleanup_mode > 0 ) { +# ?? MAY NEED TO FIX THE FOLLOWING IF $aux_dir or $out_dir IS SET. + my %other_generated = (); + my @index_bibtex_generated = (); + my @aux_files = (); + $have_fdb = 0; + if ( -e $fdb_name ) { + print "$My_name: Examining fdb file '$fdb_name' for rules ...\n" + if $diagnostics; + $have_fdb = ( 0 == rdb_read( $fdb_name ) ); + } + if ( $have_fdb ) { + rdb_for_all( + sub { # Find generated files at rule level + my ($base, $path, $ext) = fileparseA( $$Psource ); + $base = $path.$base; + if ( $rule =~ /^makeindex/ ) { + push @index_bibtex_generated, $$Psource, $$Pdest, "$base.ilg"; + } + elsif ( $rule =~ /^(bibtex|biber)/ ) { + push @index_bibtex_generated, $$Pdest, "$base.blg"; + push @aux_files, $$Psource; + } + elsif ( exists $other_generated{$$Psource} ) { + $other_generated{$$Pdest}; + } + }, + sub { # Find generated files at source file level + if ( $file =~ /\.aux$/ ) { push @aux_files, $file; } + } + ); + } + elsif ( -e $log_name ) { + # No fdb file, but log file exists, so do inferior job by parse_log + print "$My_name: Examining log file '$log_name' for generated files...\n" + if $diagnostics; + # Variables set by parse_log. Can I remove them? + local %generated_log = (); + local %dependents = (); # Maps files to status. Not used here. + local @bbl_files = (); # Not used here. + local %idx_files = (); # Maps idx_file to (ind_file, base). Not used here. + local %conversions = (); # (pdf)latex-performed conversions. Not used here. + # Maps output file created and read by (pdf)latex + # to source file of conversion. + local $primary_out = ''; # Actual output file (dvi or pdf). Not used here. + local $fls_file_analyzed = 0; + &parse_log; + %other_generated = %generated_log; + } + else { + print "$My_name: No fdb or log file, so clean up default set of files ...\n" + if $diagnostics; + } + + if ( ($go_mode == 2) && !$silent ) { + warn "$My_name: Removing all generated files\n" unless $silent; + } + if ($bibtex_use < 2) { + delete $generated_exts_all{'bbl'}; + } + # Convert two arrays to hashes: + my %index_bibtex_generated = (); + my %aux_files = (); + foreach (@index_bibtex_generated) { + $index_bibtex_generated{$_} = 1 + unless ( /\.bbl$/ && ($bibtex_use < 2) ); + delete( $other_generated{$_} ); + } + foreach (@aux_files) { + $aux_files{$_} = 1; + delete( $other_generated{$_} ); + } + if ($diagnostics) { + show_array( "For deletion, the following were determined from fdb file or log file:\n" + ." Generated (from makeindex and bibtex):", + keys %index_bibtex_generated ); + show_array( " Aux files:", keys %aux_files ); + show_array( " Other generated files:\n" + ." (only deleted if \$cleanup_includes_generated is set): ", + keys %other_generated ); + show_array( " Yet other generated files:\n", + keys %generated_exts_all ); + } + &cleanup1( $aux_dir1, $fdb_ext, 'blg', 'ilg', 'log', 'aux.bak', 'idx.bak', + split('\s+',$clean_ext), + keys %generated_exts_all + ); + unlink_or_move( 'texput.log', "texput.aux", "missfont.log", + keys %index_bibtex_generated, + keys %aux_files ); + if ( $dependents_list && ( $deps_file ne '-' ) ) { + unlink_or_move( $deps_file ); + } + if ($cleanup_includes_generated) { + unlink_or_move( keys %other_generated ); + } + if ( $cleanup_includes_cusdep_generated) { + &cleanup_cusdep_generated; + } + if ( $cleanup_mode == 1 ) { + &cleanup1( $out_dir1, 'dvi', 'dviF', 'ps', 'psF', 'pdf', + 'synctex.gz', 'xdv', + split('\s+', $clean_full_ext) + ); + } + } + if ($cleanup_fdb) { + unlink_or_move( $fdb_name ); + # If the fdb file exists, it will have been read, and therefore changed + # rule database. But deleting the fdb file implies we also want + # a virgin rule database, so we must reset it: + rdb_set_rules( \%rule_list ); + } + if ($cleanup_only) { next FILE; } + + +#??? The following are not needed if use rdb_make. +# ?? They may be set too early? +# Arrays and hashes for picking out accessible rules. +# Distinguish rules for making files and others + @accessible_all = sort ( &rdb_accessible( keys %requested_filerules, keys %one_time )); + %accessible_filerules = (); + foreach (@accessible_all) { + unless ( /view/ || /print/ ) { $accessible_filerules{$_} = 1; } + } + @accessible_filerules = sort keys %accessible_filerules; + +# show_array ( "=======All rules used", @accessible_all ); +# show_array ( "=======Requested file rules", sort keys %requested_filerules ); +# show_array ( "=======Rules for files", @accessible_filerules ); + + if ( $diagnostics ) { + print "$My_name: Rules after start up for '$texfile_name'\n"; + rdb_show(); + } + + %primaries = (); + foreach (@accessible_all) { + if ( ($_ eq 'latex') || ($_ eq 'pdflatex') || ($_ eq 'lualatex') + || ($_ eq 'xelatex') ) + { $primaries{$_} = 1; } + } + + $have_fdb = 0; + if (! -e $aux_main ) { + # No aux file => set up trivial aux file + # and corresponding fdb_file. Arrange them to provoke one run + # as minimum, but no more if actual aux file is trivial. + # (Useful on big files without cross references.) + # If aux file doesn't exist, then any fdb file is surely + # wrong. + # Previously, I had condition for this as being both aux and + # fdb files failing to exist. But it's not obvious what to + # do if aux exists and fdb doesn't. So I won't do anything. + &set_trivial_aux_fdb; + } + + if ( -e $fdb_name ) { + $rdb_errors = rdb_read( $fdb_name ); + $have_fdb = ($rdb_errors == 0); + } + if (!$have_fdb) { + # We didn't get a valid set of data on files used in + # previous run. So use filetime criterion for make + # instead of change from previous run, until we have + # done our own make. + rdb_recurse( [keys %possible_primaries], + sub{ if ( $$Ptest_kind == 1 ) { $$Ptest_kind = 3;} } + ); + if ( -e $log_name ) { + rdb_for_some( [keys %possible_primaries], \&rdb_set_latex_deps ); + } + } + foreach $rule ( rdb_accessible( uniq1( keys %requested_filerules ) ) ){ + # For all source files of all accessible rules, + # if the file data are not already set (e.g., from fdb_latexmk + # file, set them from disk. + rdb_one_rule ($rule, undef, + sub{ if ( $$Ptime == 0) { &rdb_update1; } } + ); + } + + if ($go_mode) { + # Force everything to be remade. + rdb_recurse( [keys %requested_filerules], sub{$$Pout_of_date=1;} ); + } + + + if ( $diagnostics ) { + print "$My_name: Rules after initialization\n"; + rdb_show(); + } + + #************************************************************ + + if ( $preview_continuous_mode ) { + &make_preview_continuous; + next FILE; + } + + +## Handling of failures: +## Variable $failure is set to indicate a failure, with information +## put in $failure_msg. +## These variables should be set to 0 and '' at any point at which it +## should be assumed that no failures have occurred. +## When after a routine is called it is found that $failure is set, then +## processing should normally be aborted, e.g., by return. +## Then there is a cascade of returns back to the outermost level whose +## responsibility is to handle the error. +## Exception: An outer level routine may reset $failure and $failure_msg +## after initial processing, when the error condition may get +## ameliorated later. + #Initialize failure flags now. + $failure = 0; + $failure_msg = ''; + $failure = rdb_make( keys %requested_filerules ); + if ( ( $failure <= 0 ) || $force_mode ) { + rdb_for_some( [keys %one_time], \&rdb_run1 ); + } + if ($failure > 0) { next FILE; } +} # end FILE +continue { + if ($deps_handle) { deps_list($deps_handle); } + # If requested, print the list of rules. But don't do this in -pvc + # mode, since the rules list has already been printed. + if ($rules_list && ! $preview_continuous_mode) { rdb_list(); } + # Handle any errors + $error_message_count = rdb_show_rule_errors(); + if ( ($error_message_count == 0) || ($failure > 0) ) { + if ( $failure_msg ) { + #Remove trailing space + $failure_msg =~ s/\s*$//; + warn "$My_name: Did not finish processing file '$filename':\n", + " $failure_msg\n"; + $failure = 1; + } + } + if ( ($failure > 0) || ($error_message_count > 0) ) { + $failure_count ++; + push @failed_primaries, $filename; + } + &ifcd_popd; +} +close($deps_handle) if ( $deps_handle ); + +if ($show_time) { show_timing();} + +sub show_timing { + my $processing_time = processing_time() - $processing_time1; + print @timings, "Accumulated processing time = $processing_time\n"; + @timings = (); + $processing_time1 = processing_time(); +} + +# If we get here without going through the continue section: +if ( $do_cd && ($#dir_stack > -1) ) { + # Just in case we did an abnormal exit from the loop + warn "$My_name: Potential bug: dir_stack not yet unwound, undoing all directory changes now\n"; + &finish_dir_stack; +} + +if ($failure_count > 0) { + if ( $#file_list > 0 ) { + # Error occured, but multiple files were processed, so + # user may not have seen all the error messages + warn "\n------------\n"; + show_array( + "$My_name: Some operations failed, for the following tex file(s)", + @failed_primaries); + } + if ( !$force_mode ) { + warn "$My_name: Use the -f option to force complete processing,\n", + " unless error was exceeding maximum runs of latex/pdflatex.\n"; + } + exit 12; +} + + + +# end MAIN PROGRAM +############################################################# + +sub fix_cmds { + # If commands do not have placeholders for %S etc, put them in + foreach ($latex, $pdflatex, $lpr, $lpr_dvi, $lpr_pdf, + $pdf_previewer, $ps_previewer, $ps_previewer_landscape, + $dvi_previewer, $dvi_previewer_landscape, + $kpsewhich + ) { + # Source only + if ( $_ && ! /%/ ) { $_ .= " %O %S"; } + } + foreach ($pdf_previewer, $ps_previewer, $ps_previewer_landscape, + $dvi_previewer, $dvi_previewer_landscape, + ) { + # Run previewers detached + if ( $_ && ! /^(nostart|NONE|internal) / ) { + $_ = "start $_"; + } + } + foreach ($biber, $bibtex) { + # Base only + if ( $_ && ! /%/ ) { $_ .= " %O %B"; } + } + foreach ($dvipdf, $ps2pdf) { + # Source and dest without flag for destination + if ( $_ && ! /%/ ) { $_ .= " %O %S %D"; } + } + foreach ($dvips, $makeindex) { + # Source and dest with -o dest before source + if ( $_ && ! /%/ ) { $_ .= " %O -o %D %S"; } + } + foreach ($dvi_filter, $ps_filter) { + # Source and dest, but as filters + if ( $_ && ! /%/ ) { $_ .= " %O <%S >%D"; } + } +} #END fix_cmds + +############################################################# + +sub add_option { + # Call add_option( $opt, \$cmd ... ) + # Add option to one or more commands + my $option = shift; + while (@_) { + if ( ${$_[0]} !~ /%/ ) { &fix_cmds; } + ${$_[0]} =~ s/%O/$option %O/; + shift; + } +} #END add_option + +############################################################# + +sub rdb_make_rule_list { +# Set up specifications for standard rules, adjusted to current conditions +# Substitutions: %S = source, %D = dest, %B = this rule's base +# %T = texfile, %R = root = base for latex. +# %Y for $aux_dir1, %Z for $out_dir1 + + # Defaults for dvi, ps, and pdf files + # Use local, not my, so these variables can be referenced + local $dvi_final = "%Z%R.dvi"; + local $ps_final = "%Z%R.ps"; + local $pdf_final = "%Z%R.pdf"; + local $xdv_final = "%Z%R.xdv"; + if ( length($dvi_filter) > 0) { + $dvi_final = "%Z%R.dviF"; + } + if ( length($ps_filter) > 0) { + $ps_final = "%Z%R.psF"; + } + + my $print_file = ''; + my $print_cmd = 'NONE'; + if ( $print_type eq 'dvi' ) { + $print_file = $dvi_final; + $print_cmd = $lpr_dvi; + } + elsif ( $print_type eq 'pdf' ) { + $print_file = $pdf_final; + $print_cmd = $lpr_pdf; + } + elsif ( $print_type eq 'ps' ) { + $print_file = $ps_final; + $print_cmd = $lpr; + } + elsif ( $print_type eq 'none' ) { + $print_cmd = 'NONE echo NO PRINTING CONFIGURED'; + } + + my $view_file = ''; + my $viewer = ''; + my $viewer_update_method = 0; + my $viewer_update_signal = undef; + my $viewer_update_command = undef; + + if ( ($view eq 'dvi') || ($view eq 'pdf') || ($view eq 'ps') ) { + $view_file = ${$view.'_final'}; + $viewer = ${$view.'_previewer'}; + $viewer_update_method = ${$view.'_update_method'}; + $viewer_update_signal = ${$view.'_update_signal'}; + if (defined ${$view.'_update_command'}) { + $viewer_update_command = ${$view.'_update_command'}; + } + } + # Specification of internal command for viewer update: + my $PA_update = ['do_update_view', $viewer_update_method, $viewer_update_signal, 0, 1]; + +# For test_kind: Use file contents for latex and friends, but file time for the others. +# This is because, especially for dvi file, the contents of the file may contain +# a pointer to a file to be included, not the contents of the file! + %rule_list = ( + 'latex' => [ 'primary', "$latex", '', "%T", "%Z%B.dvi", "%R", 1, ["%Y%R.log"] ], + 'pdflatex' => [ 'primary', "$pdflatex", '', "%T", "%Z%B.pdf", "%R", 1, ["%Y%R.log"] ], + 'lualatex' => [ 'primary', "$lualatex", '', "%T", "%Z%B.pdf", "%R", 1, ["%Y%R.log"] ], + 'xelatex' => [ 'primary', "$xelatex", '', "%T", "%Z%B.xdv", "%R", 1, ["%Y%R.log"] ], + 'dvipdf' => [ 'external', "$dvipdf", 'do_viewfile', $dvi_final, "%B.pdf", "%Z%R", 2 ], + 'xdvipdfmx' => [ 'external', "$xdvipdfmx", 'do_viewfile', $xdv_final, "%B.pdf", "%Z%R", 2 ], + 'dvips' => [ 'external', "$dvips", 'do_viewfile', $dvi_final, "%B.ps", "%Z%R", 2 ], + 'dvifilter'=> [ 'external', $dvi_filter, 'do_viewfile', "%B.dvi", "%B.dviF", "%Z%R", 2 ], + 'ps2pdf' => [ 'external', "$ps2pdf", 'do_viewfile', $ps_final, "%B.pdf", "%Z%R", 2 ], + 'psfilter' => [ 'external', $ps_filter, 'do_viewfile', "%B.ps", "%B.psF", "%Z%R", 2 ], + 'print' => [ 'external', "$print_cmd", 'if_source', $print_file, "", "", 2 ], + 'update_view' => [ 'external', $viewer_update_command, $PA_update, + $view_file, "", "", 2 ], + 'view' => [ 'external', "$viewer", 'if_source', $view_file, "", "", 2 ], + ); + +# Ensure we only have one way to make pdf file, and that it is appropriate: + if ($pdf_mode == 2) { delete $rule_list{'dvipdf'}; delete $rule_list{'pdflatex'}; delete $rule_list{'lualatex'}; delete $rule_list{'xelatex'}; } + elsif ($pdf_mode == 3) { delete $rule_list{'pdflatex'}; delete $rule_list{'ps2pdf'}; delete $rule_list{'lualatex'}; delete $rule_list{'xelatex'}; } + elsif ($pdf_mode == 4) { delete $rule_list{'pdflatex'}; delete $rule_list{'ps2pdf'}; delete $rule_list{'dvipdf'}; delete $rule_list{'xelatex'}; } + elsif ($pdf_mode == 5) { delete $rule_list{'pdflatex'}; delete $rule_list{'ps2pdf'}; delete $rule_list{'dvipdf'}; delete $rule_list{'lualatex'}; } + else { # Default is to leave pdflatex + delete $rule_list{'dvipdf'}; delete $rule_list{'ps2pdf'}; delete $rule_list{'lualatex'}; delete $rule_list{'xelatex'}; + } + +} # END rdb_make_rule_list + +#************************************************************ + +sub rdb_set_rules { + # Call rdb_set_rules( \%rule_list, ...) + # Set up rule database from definitions + + # Map of files to rules that MAKE them: + %rule_db = (); + + foreach my $Prule_list (@_) { + foreach my $rule ( keys %$Prule_list) { + my ( $cmd_type, $ext_cmd, $int_cmd, $source, $dest, $base, $test_kind, $PA_extra_gen ) = @{$$Prule_list{$rule}}; + if ( ! $PA_extra_gen ) { $PA_extra_gen = []; } + my $needs_making = 0; + # Substitute in the filename variables, since we will use + # those for determining filenames. But delay expanding $cmd + # until run time, in case of changes. + foreach ($base, $source, $dest, @$PA_extra_gen ) { + s/%R/$root_filename/; + s/%Y/$aux_dir1/; + s/%Z/$out_dir1/; + } + foreach ($source, $dest ) { + s/%B/$base/; + s/%T/$texfile_name/; + } + # print "$rule: $cmd_type, EC='$ext_cmd', IC='$int_cmd', $test_kind,\n", + # " S='$source', D='$dest', B='$base' $needs_making\n"; + rdb_create_rule( $rule, $cmd_type, $ext_cmd, $int_cmd, $test_kind, + $source, $dest, $base, + $needs_making, undef, undef, 1, $PA_extra_gen ); +# !! ?? Last line was +# $needs_making, undef, ($test_kind==1) ); + } + } # End arguments of subroutine + &rdb_make_links; +} # END rdb_set_rules + +#************************************************************ + +sub rdb_make_links { +# ?? Problem if there are multiple rules for getting a file. Notably pdf. +# Which one to choose? + # Create $from_rule if there's a suitable rule. + # Map files to rules: + local %from_rules = (); + rdb_for_all( sub{ if($$Pdest){$from_rules{$$Pdest} = $rule;} } ); +#?? foreach (sort keys %from_rules) {print "D='$_' F='$from_rules{$_}\n";} + rdb_for_all( + 0, + sub{ + # Set from_rule, but only if it isn't set or is invalid. + # Don't forget the biber v. bibtex issue + if ( exists $from_rules{$file} + && ( (!$$Pfrom_rule) || (! exists $rule_db{$$Pfrom_rule} ) ) + ) + { $$Pfrom_rule = $from_rules{$file}; + } + } + ); + rdb_for_all( + 0, + sub{ + if ( exists $from_rules{$file} ) { + $$Pfrom_rule = $from_rules{$file}; + } + if ( $$Pfrom_rule && (! rdb_rule_exists( $$Pfrom_rule ) ) ) { + $$Pfrom_rule = ''; + } +#?? print "$rule: $file, $$Pfrom_rule\n"; + } + ); +} # END rdb_make_links + +#************************************************************ + +sub set_trivial_aux_fdb { + # 1. Write aux file EXACTLY as would be written if the tex file + # had no cross references, etc. I.e., a minimal .aux file. + # 2. Write a corresponding fdb file + # 3. Provoke a run of (pdf)latex (actually of all primaries). + + local *aux_file; + open( aux_file, '>', $aux_main ) + or die "Cannot write file '$aux_main'\n"; + print aux_file "\\relax \n"; + close(aux_file); + + foreach my $rule (keys %primaries ) { + rdb_ensure_file( $rule, $texfile_name ); + rdb_ensure_file( $rule, $aux_main ); + rdb_one_rule( $rule, + sub{ $$Pout_of_date = 1; } + ); + } + &rdb_write( $fdb_name ); +} #END set_trivial_aux_fdb + +#************************************************************ +#### Particular actions +#************************************************************ +#************************************************************ + +sub do_cusdep { + # Unconditional application of custom-dependency + # except that rule is not applied if the source file source + # does not exist, and an error is returned if the dest is not made. + # + # Assumes rule context for the custom-dependency, and that my first + # argument is the name of the subroutine to apply + my $func_name = $_[0]; + my $return = 0; + if ( !-e $$Psource ) { + # Source does not exist. Users of this rule will need to turn + # it off when custom dependencies are reset + if ( !$silent ) { +## ??? Was commented out. 1 Sep. 2008 restored, for cusdep no-file-exists issue + warn "$My_name: In trying to apply custom-dependency rule\n", + " to make '$$Pdest' from '$$Psource'\n", + " the source file has disappeared since the last run\n"; + } + # Treat as successful + } + elsif ( !$func_name ) { + warn "$My_name: Possible misconfiguration or bug:\n", + " In trying to apply custom-dependency rule\n", + " to make '$$Pdest' from '$$Psource'\n", + " the function name is blank.\n"; + } + elsif ( ! defined &$func_name ) { + warn "$My_name: Misconfiguration or bug,", + " in trying to apply custom-dependency rule\n", + " to make '$$Pdest' from '$$Psource'\n", + " function name '$func_name' does not exists.\n"; + } + else { + my $cusdep_ret = &$func_name( $$Pbase ); + if ( defined $cusdep_ret && ($cusdep_ret != 0) ) { + $return = $cusdep_ret; + if ($return) { + warn "Rule '$rule', function '$func_name'\n", + " failed with return code = $return\n"; + } + } + elsif ( !-e $$Pdest ) { + # Destination non-existent, but routine failed to give an error + warn "$My_name: In running custom-dependency rule\n", + " to make '$$Pdest' from '$$Psource'\n", + " function '$func_name' did not make the destination.\n"; + $return = -1; + } + } + return $return; +} # END do_cusdep + +#************************************************************ + +sub do_viewfile { + # Unconditionally make file for viewing, going through temporary file if + # Assumes rule context + + my $return = 0; + my ($base, $path, $ext) = fileparseA( $$Pdest ); + if ( &view_file_via_temporary ) { + if ( $$Pext_cmd =~ /%D/ ) { + my $tmpfile = tempfile1( "${root_filename}_tmp", $ext ); + warn "$My_name: Making '$$Pdest' via temporary '$tmpfile'...\n"; + $return = &Run_subst( undef, undef, undef, undef, $tmpfile ); + move( $tmpfile, $$Pdest ); + } + else { + warn "$My_name is configured to make '$$Pdest' via a temporary file\n", + " but the command template '$$Pext_cmd' does not have a slot\n", + " to set the destination file, so I won't use a temporary file\n"; + $return = &Run_subst(); + } + } + else { + $return = &Run_subst(); + } + return $return; +} #END do_viewfile + +#************************************************************ + +sub do_update_view { + # Update viewer + # Assumes rule context + # Arguments: (method, signal, viewer_process) + + my $return = 0; + + # Although the process is passed as an argument, we'll need to update it. + # So (FUDGE??) bypass the standard interface for the process. + # We might as well do this for all the arguments. + my $viewer_update_method = ${$PAint_cmd}[1]; + my $viewer_update_signal = ${$PAint_cmd}[2]; + my $Pviewer_process = \${$PAint_cmd}[3]; + my $Pneed_to_get_viewer_process = \${$PAint_cmd}[4]; + + if ($viewer_update_method == 2) { + if ($$Pneed_to_get_viewer_process) { + $$Pviewer_process = &find_process_id( $$Psource ); + if ($$Pviewer_process != 0) { + $$Pneed_to_get_viewer_process = 0; + } + } + if ($$Pviewer_process == 0) { + print "$My_name: need to signal viewer for file '$$Psource', but didn't get \n", + " process ID for some reason, e.g., no viewer, bad configuration, bug\n" + if $diagnostics ; + } + elsif ( defined $viewer_update_signal) { + print "$My_name: signalling viewer, process ID $$Pviewer_process ", + "with signal $viewer_update_signal\n" + if $diagnostics ; + kill $viewer_update_signal, $$Pviewer_process; + } + else { + warn "$My_name: viewer is supposed to be sent a signal\n", + " but no signal is defined. Misconfiguration or bug?\n"; + $return = 1; + } + } + elsif ($viewer_update_method == 4) { + if (defined $$Pext_cmd) { + $return = &Run_subst(); + } + else { + warn "$My_name: viewer is supposed to be updated by running a command,\n", + " but no command is defined. Misconfiguration or bug?\n"; + } + } + return $return; +} #END do_update_view + +#************************************************************ + +sub if_source { + # Unconditionally apply rule if source file exists. + # Assumes rule context + if ( -e $$Psource ) { + return &Run_subst(); + } + else { + warn "Needed source file '$$Psource' does not exist.\n"; + return -1; + } +} #END if_source + +#************************************************************ +#### Subroutines +#************************************************************ +#************************************************************ + +sub find_basename { + # Finds the basename of the root file + # Arguments: + # 1 - Filename to breakdown + # 2 - Where to place base file + # 3 - Where to place tex file + # Returns non-zero if tex file does not exist + # + # The rules for determining this depend on the implementation of TeX. + # The variable $extension_treatment determines which rules are used. + + # !!!!!!!! I still need to implement use of kpsewhich to match behavior + # of (pdf)latex correctly. + + local($given_name, $base_name, $ext, $path, $tex_name); + $given_name = $_[0]; + if ( "$extension_treatment" eq "miktex_old" ) { + # Miktex v. 1.20d: + # 1. If the filename has an extension, then use it. + # 2. Else append ".tex". + # 3. The basename is obtained from the filename by + # removing the path component, and the extension, if it + # exists. If a filename has a multiple extension, then + # all parts of the extension are removed. + # 4. The names of generated files (log, aux) are obtained by + # appending .log, .aux, etc to the basename. Note that + # these are all in the CURRENT directory, and the drive/path + # part of the originally given filename is ignored. + # + # Thus when the given filename is "\tmp\a.b.c", the tex + # filename is the same, and the basename is "a". + + ($base_name, $path, $ext) = fileparse( $given_name, '\..*' ); + if ( "$ext" eq "") { $tex_name = "$given_name.tex"; } + else { $tex_name = $given_name; } + $_[1] = $base_name; + $_[2] = $tex_name; + } + elsif ( "$extension_treatment" eq "unix" ) { + # unix (at least TeXLive 2016) => + # A. Finding of tex file: + # 1. If filename.tex exists, use it, + # 2. else if kpsewhich finds filename.tex, use it + # 3. else if filename exists, use it, + # 4. else if kpsewhich finds filename, use it. + # (Probably can unify the above by + # 1'. If kpsewhich finds filename.tex, use result. + # 2'. else if kpsewhich finds filename, use result. + # 3'. else report file not found. + # B. The base filename is obtained by deleting the path + # component and, if an extension exists, the last + # component of the extension, even if the extension is + # null. (A name ending in "." has a null extension.) + # C. The names of generated files (log, aux) are obtained by + # appending .log, .aux, etc to the basename. Note that + # these are all in the CURRENT directory, and the drive/path + # part of the originally given filename is ignored. + # + # Thus when the given filename is "/tmp/a.b.c", there are two + # cases: + # a. /tmp/a.b.c.tex exists. Then this is the tex file, + # and the basename is "a.b.c". + # b. /tmp/a.b.c.tex does not exist. Then the tex file is + # "/tmp/a.b.c", and the basename is "a.b". + # But there are also modifications of this when a file can be + # found by kpsewhich. + + if ( -f "$given_name.tex" ) { + $tex_name = "$given_name.tex"; + } + else { + $tex_name = "$given_name"; + } + ($base_name, $path, $ext) = fileparse( $tex_name, '\.[^\.]*' ); + $_[1] = $base_name; + $_[2] = $tex_name; + } + else { + die "$My_name: Incorrect configuration gives \$extension_treatment=", + "'$extension_treatment'\n"; + } + if ($diagnostics) { + print "Given='$given_name', tex='$tex_name', base='$base_name'\n"; + } + return ! -e $tex_name; +} #END find_basename + +#************************************************************ + +sub make_preview_continuous { + local @changed = (); + local @disappeared = (); + local @no_dest = (); # Non-existent destination files + local @rules_never_run = (); + local @rules_to_apply = (); + + local $failure = 0; + local %rules_applied = (); + local $updated = 0; + + # What to make? + my @targets = keys %requested_filerules; + + $quell_uptodate_msgs = 1; + + local $view_file = ''; + rdb_one_rule( 'view', sub{ $view_file = $$Psource; } ); + + if ( ($view eq 'dvi') || ($view eq 'pdf') || ($view eq 'ps') ) { + warn "Viewing $view\n"; + } + elsif ( $view eq 'none' ) { + warn "Not using a previewer\n"; + $view_file = ''; + } + else { + warn "$My_name: BUG: Invalid preview method '$view'\n"; + exit 20; + } + + my $viewer_running = 0; # No viewer known to be running yet + # Get information from update_view rule + local $viewer_update_method = 0; + # Pointers so we can update the following: + local $Pviewer_process = undef; + local $Pneed_to_get_viewer_process = undef; + rdb_one_rule( 'update_view', + sub{ $viewer_update_method = $$PAint_cmd[1]; + $Pviewer_process = \$$PAint_cmd[3]; + $Pneed_to_get_viewer_process = \$$PAint_cmd[4]; + } + ); + # Note that we don't get the previewer process number from the program + # that starts it; that might only be a script to get things set up and the + # actual previewer could be (and sometimes IS) another process. + + if ( ($view_file ne '') && (-e $view_file) && !$new_viewer_always ) { + # Is a viewer already running? + # (We'll save starting up another viewer.) + $$Pviewer_process = &find_process_id( $view_file ); + if ( $$Pviewer_process ) { + warn "$My_name: Previewer is already running\n" + if !$silent; + $viewer_running = 1; + $$Pneed_to_get_viewer_process = 0; + } + } + + # Loop forever, rebuilding .dvi and .ps as necessary. + # Set $first_time to flag first run (to save unnecessary diagnostics) +CHANGE: + for (my $first_time = 1; 1; $first_time = 0 ) { + my %rules_to_watch = %requested_filerules; + $updated = 0; + $failure = 0; + $failure_msg = ''; + if ( $MSWin_fudge_break && ($^O eq "MSWin32") ) { + # Fudge under MSWin32 ONLY, to stop perl/latexmk from + # catching ctrl/C and ctrl/break, and let it only reach + # downstream programs. See comments at first definition of + # $MSWin_fudge_break. + $SIG{BREAK} = $SIG{INT} = 'IGNORE'; + } + if ($compiling_cmd) { + Run_subst( $compiling_cmd ); + } + $failure = rdb_make( @targets ); + +## warn "=========Viewer PID = $$Pviewer_process; updated=$updated\n"; + + if ( $MSWin_fudge_break && ($^O eq "MSWin32") ) { + $SIG{BREAK} = $SIG{INT} = 'DEFAULT'; + } + # Start viewer if needed. + if ( ($failure > 0) && (! $force_mode) ) { + # No viewer yet + } + elsif ( ($view_file ne '') && (-e $view_file) && $updated && $viewer_running ) { + # A viewer is running. Explicitly get it to update screen if we have to do it: + rdb_one_rule( 'update_view', \&rdb_run1 ); + } + elsif ( ($view_file ne '') && (-e $view_file) && !$viewer_running ) { + # Start the viewer + if ( !$silent ) { + if ($new_viewer_always) { + warn "$My_name: starting previewer for '$view_file'\n", + "------------\n"; + } + else { + warn "$My_name: I have not found a previewer that ", + "is already running. \n", + " So I will start it for '$view_file'\n", + "------------\n"; + } + } + local $retcode = 0; + rdb_one_rule( 'view', sub { $retcode = &rdb_run1;} ); + if ( $retcode != 0 ) { + if ($force_mode) { + warn "$My_name: I could not run previewer\n"; + } + else { + &exit_msg1( "I could not run previewer", $retcode); + } + } + else { + $viewer_running = 1; + $$Pneed_to_get_viewer_process = 1; + } # end analyze result of trying to run viewer + } # end start viewer + if ( $failure > 0 ) { + if ( !$failure_msg ) { + $failure_msg = 'Failure to make the files correctly'; + } + @pre_primary = (); # Array of rules + @post_primary = (); # Array of rules + @unusual_one_time = (); # Array of rules + &rdb_classify_rules( \%possible_primaries, keys %requested_filerules ); + # There will be files changed during the run that are irrelevant. + # We need to wait for the user to change the files. + + # So set the GENERATED files from (pdf)latex as up-to-date: + rdb_for_some( [keys %current_primaries], \&rdb_update_gen_files ); + + # And don't watch for changes for post_primary rules (ps and pdf + # from dvi, etc haven't been run after an error in (pdf)latex, so + # are out-of-date by filetime criterion, but they should not be run + # until after another (pdf)latex run: + foreach (@post_primary) { delete $rules_to_watch{$_}; } + + $failure_msg =~ s/\s*$//; #Remove trailing space + warn "$My_name: $failure_msg\n", + " ==> You will need to change a source file before I do another run <==\n"; + if ($failure_cmd) { + Run_subst( $failure_cmd ); + } + } + else { + if ($success_cmd) { + Run_subst( $success_cmd ); + } + } + rdb_show_rule_errors(); + if ($rules_list) { rdb_list(); } + if ($show_time && ! $first_time) { show_timing(); } + if ( $dependents_list && ($updated || $failure) ) { + my $deps_handle = new FileHandle "> $deps_file"; + if ( defined $deps_handle ) { + deps_list($deps_handle); + close($deps_handle); + } + else { + warn "Cannot open '$deps_file' for output of dependency information\n"; + } + } + if ( $first_time || $updated || $failure ) { + print "\n=== Watching for updated files. Use ctrl/C to stop ...\n"; + } + $waiting = 1; if ($diagnostics) { warn "WAITING\n"; } +# During waiting for file changes, handle ctrl/C and ctrl/break here, rather than letting +# system handle them by terminating script (and any script that calls it). This allows, +# for example, the clean up code in the following command line to work: +# latexmk -pvc foo; cleanup; + &catch_break; + $have_break = 0; + WAIT: while (1) { + sleep( $sleep_time ); + if ($have_break) { last WAIT; } + if ( rdb_new_changes(keys %rules_to_watch) ) { + if (!$silent) { + warn "$My_name: Need to remake files.\n"; + &rdb_diagnose_changes( ' ' ); + } + last WAIT; + } + # Don't count waiting time in processing: + $processing_time1 = processing_time(); + # Does this do this job???? + local $new_files = 0; + rdb_for_some( [keys %current_primaries], sub{ $new_files += &rdb_find_new_files } ); + if ($new_files > 0) { + warn "$My_name: New file(s) found.\n"; + last WAIT; + } + if ($have_break) { last WAIT; } + } # end WAIT: + &default_break; + if ($have_break) { + print "$My_name: User typed ctrl/C or ctrl/break. I'll finish.\n"; + return; + } + $waiting = 0; if ($diagnostics) { warn "NOT WAITING\n"; } + } #end infinite_loop CHANGE: +} #END sub make_preview_continuous + +#************************************************************ + +sub process_rc_file { + # Usage process_rc_file( filename ) + # NEW VERSION + # Run rc_file whose name is given in first argument + # Exit with code 0 on success + # Exit with code 1 if file cannot be read or does not exist. + # Stop if there is a syntax error or other problem. + # PREVIOUSLY: + # Exit with code 2 if is a syntax error or other problem. + my $rc_file = $_[0]; + my $ret_code = 0; + warn "$My_name: Executing Perl code in file '$rc_file'...\n" + if $diagnostics; + # I could use the do command of perl, but the preceeding -r test + # to get good diagnostics gets the wrong result under cygwin + # (e.g., on /cygdrive/c/latexmk/LatexMk) + my $RCH = new FileHandle; + if ( !-e $rc_file ) { + warn "$My_name: The rc-file '$rc_file' does not exist\n"; + return 1; + } + elsif ( -d $rc_file ) { + warn "$My_name: The supposed rc-file '$rc_file' is a directory; but it\n", + " should be a normal text file\n"; + return 1; + } + elsif ( open $RCH, "<$rc_file" ) { + { local $/; eval <$RCH>; } + close $RCH; + } + else { + warn "$My_name: I cannot read the rc-file '$rc_file'\n"; + return 1; + } + # PREVIOUS VERSION +# if ( ! -r $rc_file ) { +# warn "$My_name: I cannot read the rc-file '$rc_file'\n", +# " or at least that's what Perl (for $^O) reports\n"; +# return 1; +# } +# do( $rc_file ); + if ( $@ ) { + # Indent each line of possibly multiline message: + my $message = prefix( $@, " " ); + warn "$My_name: Initialization file '$rc_file' gave an error:\n", + "$message\n"; + die "$My_name: Stopping because of problem with rc file\n"; + # Use the following if want non-fatal error. + return 2; + } + return 0; +} #END process_rc_file + +#************************************************************ + +sub execute_code_string { + # Usage execute_code_string( string_of_code ) + # Run the perl code contained in first argument + # Halt if there is a syntax error or other problem. + # ???Should I leave the exiting to the caller (perhaps as an option)? + # But I can always catch it with an eval if necessary. + # That confuses ctrl/C and ctrl/break handling. + my $code = $_[0]; + warn "$My_name: Executing initialization code specified by -e:\n", + " '$code'...\n" + if $diagnostics; + eval $code; + # The return value from the eval is not useful, since it is the value of + # the last expression evaluated, which could be anything. + # The correct test of errors is on the value of $@. + + if ( $@ ) { + # Indent each line of possibly multiline message: + my $message = prefix( $@, " " ); + die "$My_name: ", + "Stopping because executing following code from command line\n", + " $code\n", + "gave an error:\n", + "$message\n"; + } +} #END execute_code_string + +#************************************************************ + +sub cleanup1 { + # Usage: cleanup1( directory, exts_without_period, ... ) + # + # The directory and the root file name are fixed names, so I must escape + # any glob metacharacters in them: + my $dir = fix_pattern( shift ); + my $root_fixed = fix_pattern( $root_filename ); + foreach (@_) { + (my $name = /%R/ ? $_ : "%R.$_") =~ s/%R/$dir$root_fixed/; + unlink_or_move( glob( "$name" ) ); + } +} #END cleanup1 + +#************************************************************ + +sub cleanup_cusdep_generated { + # Remove files generated by custom dependencies + rdb_for_all( \&cleanup_one_cusdep_generated ); +} #END cleanup_cusdep_generated + +#************************************************************ + +sub cleanup_one_cusdep_generated { + # Remove destination file generated by one custom dependency + # Assume rule context, but not that the rule is a custom dependency. + # Only delete destination file if source file exists (so destination + # file can be recreated) + if ( $$Pcmd_type ne 'cusdep' ) { + # NOT cusdep + return; + } + if ( (-e $$Pdest) && (-e $$Psource) ) { + unlink_or_move( $$Pdest ); + } + elsif ( (-e $$Pdest) && (!-e $$Psource) ) { + warn "$My_name: For custom dependency '$rule',\n", + " I won't delete destination file '$$Pdest'\n", + " because the source file '$$Psource' doesn't exist,\n", + " so the destination file may not be able to be recreated\n"; + } +} #END cleanup_one_cusdep_generated + +#************************************************************ +#************************************************************ +#************************************************************ + +# Error handling routines, warning routines, help + +#************************************************************ + +sub die_trace { + # Call: die_trace( message ); + &traceback; # argument(s) passed unchanged + die "\n"; +} #END die_trace + +#************************************************************ + +sub traceback { + # Call: &traceback + # or traceback( message, ) + my $msg = shift; + if ($msg) { warn "$msg\n"; } + warn "Traceback:\n"; + my $i=0; # Start with immediate caller + while ( my ($pack, $file, $line, $func) = caller($i++) ) { + if ($func eq 'die_trace') { next; } + warn " $func called from line $line\n"; + } +} #END traceback + +#************************************************************ + +sub exit_msg1 +{ + # exit_msg1( error_message, retcode [, action]) + # 1. display error message + # 2. if action set, then restore aux file + # 3. exit with retcode + warn "\n------------\n"; + warn "$My_name: $_[0].\n"; + warn "-- Use the -f option to force complete processing.\n"; + + my $retcode = $_[1]; + if ($retcode >= 256) { + # Retcode is the kind returned by system from an external command + # which is 256 * command's_retcode + $retcode /= 256; + } + exit $retcode; +} #END exit_msg1 + +#************************************************************ + +sub warn_running { + # Message about running program: + if ( $silent ) { + warn "$My_name: @_\n"; + } + else { + warn "------------\n@_\n------------\n"; + } +} #END warn_running + +#************************************************************ + +sub exit_help +# Exit giving diagnostic from arguments and how to get help. +{ + warn "\n$My_name: @_\n", + "Use\n", + " $my_name -help\nto get usage information\n"; + exit 10; +} #END exit_help + + +#************************************************************ + +sub print_help +{ + print + "$My_name $version_num: Automatic LaTeX document generation routine\n\n", + "Usage: $my_name [latexmk_options] [filename ...]\n\n", + " Latexmk_options:\n", + " -aux-directory=dir or -auxdir=dir \n", + " - set name of directory for auxiliary files (aux, log)\n", + " - Currently this only works with MiKTeX\n", + " -bibtex - use bibtex when needed (default)\n", + " -bibtex- - never use bibtex\n", + " -bibtex-cond - use bibtex when needed, but only if the bib files exist\n", + " -bm - Print message across the page when converting to postscript\n", + " -bi - Set contrast or intensity of banner\n", + " -bs - Set scale for banner\n", + " -commands - list commands used by $my_name for processing files\n", + " -c - clean up (remove) all nonessential files, except\n", + " dvi, ps and pdf files.\n", + " This and the other clean-ups are instead of a regular make.\n", + " -C - clean up (remove) all nonessential files\n", + " including aux, dep, dvi, postscript and pdf files\n", + " and file of database of file information\n", + " -CA - clean up (remove) all nonessential files.\n", + " Equivalent to -C option.\n", + " -CF - Remove file of database of file information before doing \n", + " other actions\n", + " -cd - Change to directory of source file when processing it\n", + " -cd- - Do NOT change to directory of source file when processing it\n", + " -dependents or -deps - Show list of dependent files after processing\n", + " -dependents- or -deps- - Do not show list of dependent files\n", + " -deps-out=file - Set name of output file for dependency list,\n", + " and turn on showing of dependency list\n", + " -dF - Filter to apply to dvi file\n", + " -dvi - generate dvi\n", + " -dvi- - turn off required dvi\n", + " -e - Execute specified Perl code (as part of latexmk start-up\n", + " code)\n", + " -f - force continued processing past errors\n", + " -f- - turn off forced continuing processing past errors\n", + " -gg - Super go mode: clean out generated files (-CA), and then\n", + " process files regardless of file timestamps\n", + " -g - process regardless of file timestamps\n", + " -g- - Turn off -g\n", + " -h - print help\n", + " -help - print help\n", + " -jobname=STRING - set basename of output file(s) to STRING.\n", + " (Like --jobname=STRING on command line for many current\n", + " implementations of latex/pdflatex.)\n", + " -l - force landscape mode\n", + " -l- - turn off -l\n", + " -latex= - set program used for latex.\n", + " (replace '' by the program name)\n", + " -latexoption=