mirror of
https://github.com/bassamanator/Sovol-SV06-firmware.git
synced 2025-11-08 21:41:15 +00:00
4df5ef2db3
This adds a configuration supporting two ADXL345 sensors at the same time though a Raspberry Pi pico. Resonance measurements for both the head and the bed can be done without having to change the sensors.
43 lines
1.4 KiB
INI
43 lines
1.4 KiB
INI
#####################################################################
|
|
# Config that supports a print head and a bed sensor at the same time
|
|
# This requires a Raspberry Pi Pico. Instructions:
|
|
# https://klipper.discourse.group/t/raspberry-pi-pico-adxl345-portable-resonance-measurement/1757/9
|
|
#
|
|
# Recommended mounts:
|
|
# https://www.printables.com/model/385334-sovol-sv06-adxl345-mount-printhead-and-bed
|
|
#
|
|
# ADXL345 related Settings
|
|
# https://www.klipper3d.org/Measuring_Resonances.html#adxl345
|
|
#####################################################################
|
|
|
|
[mcu RP2040]
|
|
baud: 115200
|
|
restart_method: command
|
|
# Obtain definition by "ls -l /dev/serial/by-id/"
|
|
serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
|
|
|
|
[adxl345 head]
|
|
cs_pin: RP2040:gpio1
|
|
spi_bus: spi0a
|
|
# update axes_map if your sensor is oriented differently. Note the print on your sensor.
|
|
# -y, -z, x means that
|
|
# - the x axis of your printer corresponds to the sensor's negative y axis
|
|
# - the y axis of your printer corresponds to the sensor's negative z axis
|
|
# - the z axis of your printer corresponds to the sensor's x axis
|
|
axes_map: -y, -z, x
|
|
|
|
[adxl345 bed]
|
|
cs_pin: RP2040:gpio9
|
|
spi_bus: spi1a
|
|
|
|
[resonance_tester]
|
|
probe_points: 111.5, 116.5, 30
|
|
accel_chip_x: adxl345 head
|
|
accel_chip_y: adxl345 bed
|
|
|
|
[gcode_macro ADX]
|
|
description: Shortcut to ACCELEROMETER_QUERY for both sensors
|
|
gcode:
|
|
ACCELEROMETER_QUERY CHIP=head
|
|
ACCELEROMETER_QUERY CHIP=bed
|