# generated by SuperSlicer 2.4 on 2023-02-15 at 02:16:55 UTC

[print:_Ellis_Decorative_45_Degree_11mm3-SOVOL]
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonicgapfill
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 85%
bridge_internal_acceleration = 3000
bridge_overlap = 50%
bridge_overlap_min = 50%
bridge_speed = 140
bridge_speed_internal = 100%
bridge_type = nozzle
bridged_infill_margin = 300%
brim_acceleration = 1000
brim_ears = 0
brim_ears_detection_length = 1
brim_ears_max_angle = 120
brim_ears_pattern = concentric
brim_inside_holes = 0
brim_separation = 0
brim_speed = 50%
brim_width = 0
brim_width_interior = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
complete_objects_one_brim = 0
complete_objects_one_skirt = 0
complete_objects_sort = object
curve_smoothing_angle_concave = 0
curve_smoothing_angle_convex = 0
curve_smoothing_cutoff_dist = 2
curve_smoothing_precision = 0
default_acceleration = 3500
default_speed = 100
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
enforce_full_fill_volume = 1
enforce_retract_first_layer = 0
ensure_vertical_shell_thickness = 0
exact_last_layer_height = 0
external_infill_margin = 4
external_perimeter_acceleration = 750
external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing = 
external_perimeter_extrusion_width = 0
external_perimeter_overlap = 100%
external_perimeter_speed = 80
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
external_perimeters_vase = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
extra_perimeters_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_spacing = 
extrusion_width = 115%
fill_angle = 0
fill_angle_increment = 0
fill_density = 10%
fill_pattern = monotonic
fill_smooth_distribution = 10%
fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_spacing = 
first_layer_extrusion_width = 125%
first_layer_flow_ratio = 100%
first_layer_height = 0.25
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
first_layer_size_compensation_layers = 3
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200%
fuzzy_skin_thickness = 150%
gap_fill_acceleration = 1000
gap_fill_enabled = 1
gap_fill_flow_match_perimeter = 0%
gap_fill_last = 1
gap_fill_min_area = 50%
gap_fill_overlap = 100%
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions = 
hole_size_compensation = 0.1
hole_size_threshold = 100
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_connection = connected
infill_connection_bottom = notconnected
infill_connection_solid = notconnected
infill_connection_top = notconnected
infill_dense = 0
infill_dense_algo = autoenlarged
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_spacing = 
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 300
inherits = 
interface_shells = 0
ironing = 0
ironing_acceleration = 1000
ironing_angle = -1
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 200
max_volumetric_speed = 11
milling_after_z = 200%
milling_extra_size = 150%
milling_post_process = 0
milling_speed = 30
min_skirt_length = 20
min_width_top_surface = 200%
mmu_segmented_region_max_width = 0
model_precision = 0.0001
no_perimeter_unsupported_algo = none
notes = 
only_one_perimeter_first_layer = 0
only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
over_bridge_flow_ratio = 100%
overhangs_acceleration = 1000
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
overhangs_speed = 100%
overhangs_width = 75%
overhangs_width_speed = 0
perimeter_acceleration = 1000
perimeter_bonding = 0%
perimeter_extruder = 1
perimeter_extrusion_spacing = 
perimeter_extrusion_width = 0
perimeter_loop = 0
perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 150
perimeters = 3
post_process = 
print_custom_variables = wall_thickness_lines = 0
print_extrusion_multiplier = 100%
print_retract_length = -1
print_retract_lift = -1
print_settings_id = Ellis - Decorative 45 Degree (11mm3/s)
print_temperature = 0
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
resolution_internal = 0.1
seam_angle_cost = 100%
seam_position = rear
seam_travel_cost = 0%
single_extruder_multi_material_priming = 1
skirt_brim = 0
skirt_distance = 3
skirt_distance_from_brim = 1
skirt_extrusion_width = 0
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_max_length = 20
small_perimeter_min_length = 6
small_perimeter_speed = 30
solid_fill_pattern = monotonic
solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_spacing = 
solid_infill_extrusion_width = 140%
solid_infill_overlap = 100%
solid_infill_speed = 200
solid_over_perimeters = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_acceleration = 3500
support_material_angle = 45
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_contact_distance_type = filament
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_acceleration = 3500
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
thin_perimeters = 80%
thin_perimeters_all = 20%
thin_walls = 1
thin_walls_acceleration = 750
thin_walls_merge = 1
thin_walls_min_width = 33%
thin_walls_overlap = 50%
thin_walls_speed = 80
threads = 16
top_fill_pattern = monotonicgapfill
top_infill_extrusion_spacing = 
top_infill_extrusion_width = 100%
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 3500
travel_deceleration_use_target = 1
travel_speed = 200
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_inner_size_compensation = 0
xy_size_compensation = 0

[print:_Ellis_Decorative_Standard_11mm3-SOVOL]
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonicgapfill
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 85%
bridge_internal_acceleration = 3000
bridge_overlap = 50%
bridge_overlap_min = 50%
bridge_speed = 140
bridge_speed_internal = 100%
bridge_type = nozzle
bridged_infill_margin = 300%
brim_acceleration = 1000
brim_ears = 0
brim_ears_detection_length = 1
brim_ears_max_angle = 120
brim_ears_pattern = concentric
brim_inside_holes = 0
brim_separation = 0
brim_speed = 50%
brim_width = 0
brim_width_interior = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
complete_objects_one_brim = 0
complete_objects_one_skirt = 0
complete_objects_sort = object
curve_smoothing_angle_concave = 0
curve_smoothing_angle_convex = 0
curve_smoothing_cutoff_dist = 2
curve_smoothing_precision = 0
default_acceleration = 3500
default_speed = 100
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
enforce_full_fill_volume = 1
enforce_retract_first_layer = 0
ensure_vertical_shell_thickness = 0
exact_last_layer_height = 0
external_infill_margin = 4
external_perimeter_acceleration = 750
external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing = 
external_perimeter_extrusion_width = 0
external_perimeter_overlap = 100%
external_perimeter_speed = 80
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
external_perimeters_vase = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
extra_perimeters_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_spacing = 
extrusion_width = 115%
fill_angle = 45
fill_angle_increment = 0
fill_density = 10%
fill_pattern = monotonic
fill_smooth_distribution = 10%
fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_spacing = 
first_layer_extrusion_width = 125%
first_layer_flow_ratio = 100%
first_layer_height = 0.25
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
first_layer_size_compensation_layers = 3
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200%
fuzzy_skin_thickness = 150%
gap_fill_acceleration = 1000
gap_fill_enabled = 1
gap_fill_flow_match_perimeter = 0%
gap_fill_last = 1
gap_fill_min_area = 50%
gap_fill_overlap = 100%
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions = 
hole_size_compensation = 0.1
hole_size_threshold = 100
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_connection = connected
infill_connection_bottom = notconnected
infill_connection_solid = notconnected
infill_connection_top = notconnected
infill_dense = 0
infill_dense_algo = autoenlarged
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_spacing = 
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 300
inherits = 
interface_shells = 0
ironing = 0
ironing_acceleration = 1000
ironing_angle = -1
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 200
max_volumetric_speed = 11
milling_after_z = 200%
milling_extra_size = 150%
milling_post_process = 0
milling_speed = 30
min_skirt_length = 20
min_width_top_surface = 200%
mmu_segmented_region_max_width = 0
model_precision = 0.0001
no_perimeter_unsupported_algo = none
notes = 
only_one_perimeter_first_layer = 0
only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
over_bridge_flow_ratio = 100%
overhangs_acceleration = 1000
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
overhangs_speed = 100%
overhangs_width = 75%
overhangs_width_speed = 0
perimeter_acceleration = 1000
perimeter_bonding = 0%
perimeter_extruder = 1
perimeter_extrusion_spacing = 
perimeter_extrusion_width = 0
perimeter_loop = 0
perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 150
perimeters = 3
post_process = 
print_custom_variables = wall_thickness_lines = 0
print_extrusion_multiplier = 100%
print_retract_length = -1
print_retract_lift = -1
print_settings_id = Ellis - Decorative Standard (11mm3/s)
print_temperature = 0
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
resolution_internal = 0.1
seam_angle_cost = 100%
seam_position = cost
seam_travel_cost = 0%
single_extruder_multi_material_priming = 1
skirt_brim = 0
skirt_distance = 3
skirt_distance_from_brim = 1
skirt_extrusion_width = 0
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_max_length = 20
small_perimeter_min_length = 6
small_perimeter_speed = 30
solid_fill_pattern = monotonic
solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_spacing = 
solid_infill_extrusion_width = 140%
solid_infill_overlap = 100%
solid_infill_speed = 200
solid_over_perimeters = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_acceleration = 3500
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_contact_distance_type = filament
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_acceleration = 3500
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
thin_perimeters = 80%
thin_perimeters_all = 20%
thin_walls = 1
thin_walls_acceleration = 750
thin_walls_merge = 1
thin_walls_min_width = 33%
thin_walls_overlap = 50%
thin_walls_speed = 80
threads = 16
top_fill_pattern = monotonicgapfill
top_infill_extrusion_spacing = 
top_infill_extrusion_width = 100%
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 3500
travel_deceleration_use_target = 1
travel_speed = 200
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_inner_size_compensation = 0
xy_size_compensation = 0

[print:_Ellis_PIF_45_Degree_11mm3-SOVOL]
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonicgapfill
bottom_solid_layers = 5
bottom_solid_min_thickness = 1
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 85%
bridge_internal_acceleration = 3000
bridge_overlap = 50%
bridge_overlap_min = 50%
bridge_speed = 140
bridge_speed_internal = 100%
bridge_type = nozzle
bridged_infill_margin = 300%
brim_acceleration = 1000
brim_ears = 0
brim_ears_detection_length = 1
brim_ears_max_angle = 120
brim_ears_pattern = concentric
brim_inside_holes = 0
brim_separation = 0
brim_speed = 50%
brim_width = 0
brim_width_interior = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
complete_objects_one_brim = 0
complete_objects_one_skirt = 0
complete_objects_sort = object
curve_smoothing_angle_concave = 0
curve_smoothing_angle_convex = 0
curve_smoothing_cutoff_dist = 2
curve_smoothing_precision = 0
default_acceleration = 3500
default_speed = 100
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
enforce_full_fill_volume = 1
enforce_retract_first_layer = 0
ensure_vertical_shell_thickness = 0
exact_last_layer_height = 0
external_infill_margin = 4
external_perimeter_acceleration = 750
external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing = 
external_perimeter_extrusion_width = 100%
external_perimeter_overlap = 100%
external_perimeter_speed = 80
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
external_perimeters_vase = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
extra_perimeters_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_spacing = 
extrusion_width = 115%
fill_angle = 0
fill_angle_increment = 0
fill_density = 40%
fill_pattern = grid
fill_smooth_distribution = 10%
fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_spacing = 
first_layer_extrusion_width = 125%
first_layer_flow_ratio = 100%
first_layer_height = 0.25
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
first_layer_size_compensation_layers = 3
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200%
fuzzy_skin_thickness = 150%
gap_fill_acceleration = 1000
gap_fill_enabled = 1
gap_fill_flow_match_perimeter = 0%
gap_fill_last = 1
gap_fill_min_area = 50%
gap_fill_overlap = 100%
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions = 
hole_size_compensation = 0.1
hole_size_threshold = 100
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_connection = connected
infill_connection_bottom = notconnected
infill_connection_solid = notconnected
infill_connection_top = notconnected
infill_dense = 0
infill_dense_algo = autoenlarged
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_spacing = 
infill_extrusion_width = 160%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 300
inherits = 
interface_shells = 0
ironing = 0
ironing_acceleration = 1000
ironing_angle = -1
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 200
max_volumetric_speed = 11
milling_after_z = 200%
milling_extra_size = 150%
milling_post_process = 0
milling_speed = 30
min_skirt_length = 20
min_width_top_surface = 200%
mmu_segmented_region_max_width = 0
model_precision = 0.0001
no_perimeter_unsupported_algo = none
notes = 
only_one_perimeter_first_layer = 0
only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
over_bridge_flow_ratio = 100%
overhangs_acceleration = 1000
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
overhangs_speed = 100%
overhangs_width = 75%
overhangs_width_speed = 0
perimeter_acceleration = 1000
perimeter_bonding = 0%
perimeter_extruder = 1
perimeter_extrusion_spacing = 
perimeter_extrusion_width = 0
perimeter_loop = 0
perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 150
perimeters = 4
post_process = 
print_custom_variables = wall_thickness_lines = 0
print_extrusion_multiplier = 100%
print_retract_length = -1
print_retract_lift = -1
print_settings_id = Ellis - PIF 45 Degree (11mm3/s)
print_temperature = 0
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
resolution_internal = 0.1
seam_angle_cost = 100%
seam_position = rear
seam_travel_cost = 0%
single_extruder_multi_material_priming = 1
skirt_brim = 0
skirt_distance = 3
skirt_distance_from_brim = 1
skirt_extrusion_width = 0
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_max_length = 20
small_perimeter_min_length = 6
small_perimeter_speed = 30
solid_fill_pattern = monotonic
solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_spacing = 
solid_infill_extrusion_width = 140%
solid_infill_overlap = 100%
solid_infill_speed = 200
solid_over_perimeters = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_acceleration = 3500
support_material_angle = 45
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_contact_distance_type = filament
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_acceleration = 3500
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
thin_perimeters = 80%
thin_perimeters_all = 20%
thin_walls = 1
thin_walls_acceleration = 750
thin_walls_merge = 1
thin_walls_min_width = 33%
thin_walls_overlap = 50%
thin_walls_speed = 80
threads = 16
top_fill_pattern = monotonicgapfill
top_infill_extrusion_spacing = 
top_infill_extrusion_width = 100%
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 3500
travel_deceleration_use_target = 1
travel_speed = 200
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_inner_size_compensation = 0
xy_size_compensation = 0

[print:_Ellis_PIF_Standard_11mm3-SOVOL]
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonicgapfill
bottom_solid_layers = 5
bottom_solid_min_thickness = 1
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 85%
bridge_internal_acceleration = 3000
bridge_overlap = 50%
bridge_overlap_min = 50%
bridge_speed = 140
bridge_speed_internal = 100%
bridge_type = nozzle
bridged_infill_margin = 300%
brim_acceleration = 1000
brim_ears = 0
brim_ears_detection_length = 1
brim_ears_max_angle = 120
brim_ears_pattern = concentric
brim_inside_holes = 0
brim_separation = 0
brim_speed = 50%
brim_width = 0
brim_width_interior = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
complete_objects_one_brim = 0
complete_objects_one_skirt = 0
complete_objects_sort = object
curve_smoothing_angle_concave = 0
curve_smoothing_angle_convex = 0
curve_smoothing_cutoff_dist = 2
curve_smoothing_precision = 0
default_acceleration = 3500
default_speed = 100
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
enforce_full_fill_volume = 1
enforce_retract_first_layer = 0
ensure_vertical_shell_thickness = 0
exact_last_layer_height = 0
external_infill_margin = 4
external_perimeter_acceleration = 750
external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing = 
external_perimeter_extrusion_width = 100%
external_perimeter_overlap = 100%
external_perimeter_speed = 80
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
external_perimeters_vase = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
extra_perimeters_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_spacing = 
extrusion_width = 115%
fill_angle = 45
fill_angle_increment = 0
fill_density = 40%
fill_pattern = grid
fill_smooth_distribution = 10%
fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_spacing = 
first_layer_extrusion_width = 125%
first_layer_flow_ratio = 100%
first_layer_height = 0.25
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
first_layer_size_compensation_layers = 3
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200%
fuzzy_skin_thickness = 150%
gap_fill_acceleration = 1000
gap_fill_enabled = 1
gap_fill_flow_match_perimeter = 0%
gap_fill_last = 1
gap_fill_min_area = 50%
gap_fill_overlap = 100%
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions = 
hole_size_compensation = 0.1
hole_size_threshold = 100
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_connection = connected
infill_connection_bottom = notconnected
infill_connection_solid = notconnected
infill_connection_top = notconnected
infill_dense = 0
infill_dense_algo = autoenlarged
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_spacing = 
infill_extrusion_width = 160%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 300
inherits = 
interface_shells = 0
ironing = 0
ironing_acceleration = 1000
ironing_angle = -1
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 200
max_volumetric_speed = 11
milling_after_z = 200%
milling_extra_size = 150%
milling_post_process = 0
milling_speed = 30
min_skirt_length = 20
min_width_top_surface = 200%
mmu_segmented_region_max_width = 0
model_precision = 0.0001
no_perimeter_unsupported_algo = none
notes = 
only_one_perimeter_first_layer = 0
only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
over_bridge_flow_ratio = 100%
overhangs_acceleration = 1000
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
overhangs_speed = 100%
overhangs_width = 75%
overhangs_width_speed = 0
perimeter_acceleration = 1000
perimeter_bonding = 0%
perimeter_extruder = 1
perimeter_extrusion_spacing = 
perimeter_extrusion_width = 0
perimeter_loop = 0
perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 150
perimeters = 4
post_process = 
print_custom_variables = wall_thickness_lines = 0
print_extrusion_multiplier = 100%
print_retract_length = -1
print_retract_lift = -1
print_settings_id = Ellis - PIF Standard (11mm3/s)
print_temperature = 0
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
resolution_internal = 0.1
seam_angle_cost = 100%
seam_position = cost
seam_travel_cost = 0%
single_extruder_multi_material_priming = 1
skirt_brim = 0
skirt_distance = 3
skirt_distance_from_brim = 1
skirt_extrusion_width = 0
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_max_length = 20
small_perimeter_min_length = 6
small_perimeter_speed = 30
solid_fill_pattern = monotonic
solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_spacing = 
solid_infill_extrusion_width = 140%
solid_infill_overlap = 100%
solid_infill_speed = 200
solid_over_perimeters = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_acceleration = 3500
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_contact_distance_type = filament
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_acceleration = 3500
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
thin_perimeters = 80%
thin_perimeters_all = 20%
thin_walls = 1
thin_walls_acceleration = 750
thin_walls_merge = 1
thin_walls_min_width = 33%
thin_walls_overlap = 50%
thin_walls_speed = 80
threads = 16
top_fill_pattern = monotonicgapfill
top_infill_extrusion_spacing = 
top_infill_extrusion_width = 100%
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 3500
travel_deceleration_use_target = 1
travel_speed = 200
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_inner_size_compensation = 0
xy_size_compensation = 0

[filament:D3D PLA+ Cyanblue]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 0
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #4BC1DB
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_cooling_zone_pause = 0
filament_cost = 30.5
filament_custom_variables = ""
filament_density = 1.23
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = "ABS - KVP"
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 210
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
support_material_interface_fan_speed = -1
temperature = 210
top_fan_speed = -1

[filament:D3D PLA+ Marble]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 0
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
external_perimeter_fan_speed = -1
extrusion_multiplier = 0.97
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #0097B8
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_cooling_zone_pause = 0
filament_cost = 30.5
filament_custom_variables = ""
filament_density = 1.23
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = "ABS - KVP"
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 235
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
support_material_interface_fan_speed = -1
temperature = 235
top_fan_speed = -1

[filament:D3d PETG - Blue]
bed_temperature = 70
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1.02
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #8FA094
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 20
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 80
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 70
first_layer_temperature = 250
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 250
top_fan_speed = -1

[filament:D3d PETG - Purple]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1.02
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #8FA094
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 20
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 80
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = 0.6
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 250
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 250
top_fan_speed = -1

[filament:D3d PETG - Red]
bed_temperature = 70
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF0002
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 20
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 100
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = 0.8
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 70
first_layer_temperature = 250
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 240
top_fan_speed = -1

[filament:D3d PETG - Silver]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #8FA094
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 20
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 100
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = 0.8
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 250
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 250
top_fan_speed = -1

[filament:Eryone PETG - Blue]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #2400FF
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 20
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 120
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 250
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 240
top_fan_speed = -1

[filament:Eryone PETG - Galaxy Blue]
bed_temperature = 70
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #331EB0
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 30
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 70
first_layer_temperature = 245
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 45
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 235
top_fan_speed = -1

[filament:Eryone PETG - Galaxy Red]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 30
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 2
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #571B0D
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 30
filament_custom_variables = ""
filament_density = 1.45
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 245
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 235
top_fan_speed = -1

[filament:Nuolei TPU - Light Blue]
bed_temperature = 70
bridge_fan_speed = 80
bridge_internal_fan_speed = -1
chamber_temperature = 0
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #6FF2EC
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 18.07
filament_custom_variables = ""
filament_density = 1.22
filament_deretract_speed = 30
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 60
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.3
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 30
filament_seam_gap = nil
filament_settings_id = "Generic FLEX"
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 500
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = FLEX
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = Generic
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 70
first_layer_temperature = 235
full_fan_speed_layer = 0
inherits = 
max_fan_speed = 90
max_speed_reduction = 90%
min_fan_speed = 70
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "M900 K0"
support_material_interface_fan_speed = -1
temperature = 235
top_fan_speed = -1

[filament:Sparta3D ABS @VORON - Sky Blue, Sparkle]
bed_temperature = 100
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 50
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 3
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 0.98
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #4BC1DB
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 35
filament_custom_variables = ""
filament_density = 1.04
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ";max fan speed changed from 0 to 100"
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = ABS
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 100
first_layer_temperature = 250
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 25
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 240
top_fan_speed = -1

[filament:eSun ABS @VORON - Black]
bed_temperature = 100
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 50
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 3
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 0.98
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #000000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 30
filament_custom_variables = ""
filament_density = 1.04
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ";max fan speed changed from 0 to 100"
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = ABS
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 100
first_layer_temperature = 260
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 245
top_fan_speed = -1

[filament:eSun ABS @VORON - Green]
bed_temperature = 90
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 50
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 3
end_filament_gcode = ""
external_perimeter_fan_speed = -1
extrusion_multiplier = 0.98
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #73E350
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 30
filament_custom_variables = ""
filament_density = 1.04
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 12
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ";max fan speed changed from 0 to 100"
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = ""
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = ABS
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 100
first_layer_temperature = 260
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = ""
support_material_interface_fan_speed = -1
temperature = 245
top_fan_speed = -1

[filament:eSun PLA+ Blue]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 0
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
external_perimeter_fan_speed = -1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #0E5FED
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_cooling_zone_pause = 0
filament_cost = 19.35
filament_custom_variables = ""
filament_density = 1.23
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ";Full spool weight: 1280g"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = "ABS - KVP"
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 210
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
support_material_interface_fan_speed = -1
temperature = 210
top_fan_speed = -1

[filament:eSun PLA+ Magenta]
bed_temperature = 60
bridge_fan_speed = 100
bridge_internal_fan_speed = -1
chamber_temperature = 0
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
external_perimeter_fan_speed = -1
extrusion_multiplier = 0.97
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #707070
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_cooling_zone_pause = 0
filament_cost = 30
filament_custom_variables = ""
filament_density = 1.23
filament_deretract_speed = nil
filament_diameter = 1.75
filament_dip_extraction_speed = 70
filament_dip_insertion_speed = 33
filament_enable_toolchange_part_fan = 0
filament_enable_toolchange_temp = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_overlap = 100%
filament_max_speed = 0
filament_max_volumetric_speed = 0
filament_max_wipe_tower_speed = 0
filament_melt_zone_pause = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_seam_gap = nil
filament_settings_id = "ABS - KVP"
filament_shrink = 100%
filament_skinnydip_distance = 31
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_use_fast_skinnydip = 0
filament_use_skinnydip = 0
filament_vendor = (Unknown)
filament_wipe = nil
filament_wipe_advanced_pigment = 0.5
filament_wipe_extra_perimeter = nil
filament_wipe_inside_depth = nil
filament_wipe_inside_end = nil
filament_wipe_inside_start = nil
filament_wipe_only_crossing = nil
filament_wipe_speed = nil
first_layer_bed_temperature = 60
first_layer_temperature = 210
full_fan_speed_layer = 4
inherits = 
max_fan_speed = 100
max_speed_reduction = 90%
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
support_material_interface_fan_speed = -1
temperature = 210
top_fan_speed = -1

[printer:Sovol Sv06]
bed_custom_model = /home/bassam/3dprinter/voron01-related/Ellis-SuperSlicer-Profiles/misc/SV06BuildPlate.stl
bed_custom_texture = /home/bassam/3dprinter/voron01-related/Ellis-SuperSlicer-Profiles/misc/Texture_SV06.svg
bed_shape = 0x0,223x0,223x223,0x223
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Prusament PLA"
default_print_profile = 0.15mm QUALITY @MK3
deretract_speed = 60
end_gcode = PRINT_END
extra_loading_move = -2
extruder_colour = #FFE3CA
extruder_fan_offset = 0%
extruder_offset = 0x0
extruder_temperature_offset = 0
fan_kickstart = 0
fan_percentage = 0
fan_speedup_overhangs = 1
fan_speedup_time = 0
feature_gcode = 
gcode_filename_illegal_char = [<>:"/\\\\|?*]
gcode_flavor = klipper
gcode_precision_e = 5
gcode_precision_xyz = 3
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
init_z_rotate = 0
layer_gcode = 
lift_min = 0
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_gcode_per_second = 1500
max_layer_height = 75%
max_print_height = 255
milling_diameter = 
milling_toolchange_end_gcode = 
milling_toolchange_start_gcode = 
milling_z_lift = 
min_layer_height = 0.04
min_length = 0.035
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = PAUSE
print_host = 
printer_custom_variables = 
printer_model = 
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
printer_settings_id = Sovol Sv06
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
printhost_port = 
remaining_times = 1
remaining_times_type = m73
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.3
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0.2
retract_lift_below = 250
retract_lift_first_layer = 0
retract_lift_top = "All surfaces"
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
seam_gap = 15%
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n
start_gcode_manual = 0
template_custom_gcode = 
thumbnails = 32x32,400x300
thumbnails_color = #00FF00
thumbnails_custom_color = 1
thumbnails_end_file = 0
thumbnails_format = PNG
thumbnails_with_bed = 1
time_cost = 0
time_estimation_compensation = 100%
time_start_gcode = 20
time_toolchange = 30
tool_name = ""
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
wipe_advanced = 0
wipe_advanced_algo = linear
wipe_advanced_multiplier = 60
wipe_advanced_nozzle_melted_volume = 120
wipe_extra_perimeter = 0
wipe_inside_depth = 50%
wipe_inside_end = 1
wipe_inside_start = 0
wipe_only_crossing = 1
wipe_speed = 0
z_offset = 0
z_step = 0.005

[presets]
print = _Ellis_PIF_45_Degree_11mm3-SOVOL
sla_print = 
sla_material = 
printer = Sovol Sv06
filament = eSun PLA+ Blue