Fix moonraker issues.

.vscode/settings.json

@@ -20,6 +20,7 @@
 		"Klipper",
 		"Klipperized",
 		"lrwxrwxrwx",
+		"microsteps",
 		"moonraker",
 		"normalsize",
 		"octahedroflake",

differences.md

@@ -0,0 +1,6 @@
+# Differences
+
+| Property                  | Marlin | OSS Klipper Config |
+| ------------------------- | ------ | ------------------ |
+| `stepper_z` `run_current` | 0.800  | 0.900              |
+| `microsteps`              | 16     | 128                |

moonraker.conf

@@ -5,20 +5,11 @@ klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
 
 [authorization]
 trusted_clients:
-    10.0.0.0/16
+# Enter your client IP here or range here
-    10.0.0.0/8
+ 192.168.1.0/24
-    127.0.0.0/8
+ 10.0.0.0/24
-    169.254.0.0/16
-    172.16.0.0/12
-    192.168.0.0/16
-    FE80::/10
-    ::1/128
 cors_domains:
-    http://*.lan
+# Allow CORS requests for Fluidd
-    http://*.local
-    https://my.mainsail.xyz
-    http://my.mainsail.xyz
-    https://app.fluidd.xyz
  http://app.fluidd.xyz
 
 [octoprint_compat]
@@ -41,20 +32,20 @@ path: ~/mainsail
 enable_object_processing: True
 
 # Crowsnest update_manager entry
-[update_manager crowsnest]
+# [update_manager crowsnest]
-type: git_repo
+# type: git_repo
-path: ~/crowsnest
+# path: ~/crowsnest
-origin: https://github.com/mainsail-crew/crowsnest.git
+# origin: https://github.com/mainsail-crew/crowsnest.git
-managed_services: crowsnest
+# managed_services: crowsnest
-install_script: tools/pkglist.sh
+# install_script: tools/pkglist.sh
 
-[update_manager timelapse]
+# [update_manager timelapse]
-type: git_repo
+# type: git_repo
-primary_branch: main
+# primary_branch: main
-path: ~/moonraker-timelapse
+# path: ~/moonraker-timelapse
-origin: https://github.com/mainsail-crew/moonraker-timelapse.git
+# origin: https://github.com/mainsail-crew/moonraker-timelapse.git
-managed_services: klipper moonraker
+# managed_services: klipper moonraker
 
-[timelapse]
+# [timelapse]
-output_path: ~/printer_data/timelapse/
+# output_path: ~/printer_data/timelapse/
-frame_path: /tmp/timelapse/printer
+# frame_path: /tmp/timelapse/printer

printer.cfg

@@ -39,7 +39,7 @@ homing_retract_dist: 0
 
 [tmc2209 stepper_x]
 uart_pin: PC1
-run_current: 0.900
+run_current: 0.900 # 0.860 marlin & master
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
@@ -82,7 +82,7 @@ homing_speed: 5
 
 [tmc2209 stepper_z]
 uart_pin: PA15
-run_current: 0.900
+run_current: 0.800 # 0.900 prev personal # 0.800 marlin # 1.000 master
 stealthchop_threshold: 0
 interpolate: False
 sense_resistor: 0.150
@@ -108,7 +108,7 @@ min_temp: 0
 max_temp: 300
 max_extrude_only_distance: 150.0
 max_extrude_cross_section: 5 # NOTE Needed for KAMP purge
-pressure_advance: 0.031 # 0.0435 # 0.0465 # 0.044
+pressure_advance: 0.026 # 0.031 # 0.0435 # 0.0465 # 0.044
 
 [tmc2209 extruder]
 uart_pin: PC14
@@ -184,10 +184,11 @@ encoder_pins: ^PB14, ^PB10
 click_pin: ^!PB2
 
 [input_shaper]
-shaper_freq_x: 50.4 # 55.8 # 55.2 # 53.4 # 56.0 # 56.6 # 55.0 ; recommend accel <7500; 9200
+# try X: mzv 54.6 
-shaper_type_x: mzv
+shaper_type_x = 2hump_ei # mzv
-shaper_freq_y: 41.4 # 42.4 # 43.2 # 45.4 # 48.4 ; recommend accel < 5000;5300
+shaper_freq_x = 76.2     # 50.4
-shaper_type_y: mzv
+shaper_type_y = mzv      # mzv
+shaper_freq_y = 40.4     # 41.4
 
 [bed_screws]
 screw1_name: front left