Install crowsnest.

crowsnest.conf

@@ -0,0 +1,60 @@
+#### crowsnest.conf
+#### This is a typical default config.
+#### Also used as default in mainsail / MainsailOS
+#### See:
+#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
+#### for details to configure to your needs.
+
+
+#####################################################################
+####                                                            #####
+####      Information about ports and according URL's           #####
+####                                                            #####
+#####################################################################
+####                                                            #####
+####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
+####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
+####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
+####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
+####                                                            #####
+#####################################################################
+####    RTSP Stream URL: ( if enabled and supported )           #####
+####    rtsp://<ip>:<rtsp_port>/stream.h264                     #####
+#####################################################################
+
+
+[crowsnest]
+log_path: /home/pi/printer_data/logs/crowsnest.log
+log_level: verbose                      # Valid Options are quiet/verbose/debug
+delete_log: false                       # Deletes log on every restart, if set to true
+no_proxy: false
+
+[cam 1]
+mode: ustreamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
+                                        # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
+enable_rtsp: false                      # If camera-streamer is used, this enables also usage of an rtsp server
+rtsp_port: 8554                         # Set different ports for each device!
+port: 8080                              # HTTP/MJPG Stream/Snapshot Port
+device: /dev/video0                     # See Log for available ...
+# resolution: 640x480 # 4:3
+# resolution: 800x600 # 4:3
+# resolution: 960x720 # 4:3
+# resolution: 1024x768 # 4:3
+# resolution: 1152x864 # 4:3
+# resolution: 1280x960 # 4:3
+# resolution: 1400x1050 # 4:3
+# resolution: 1440x1080 # 4:3
+# resolution: 1600x1200 # 4:3
+# resolution: 1856x1392 # 4:3
+# resolution: 1920x1440 # 4:3
+# resolution: 640x360 	# 16:9 nHD
+# resolution: 854x480 	# 16:9 FWVGA
+# resolution: 960x540 	# 16:9 qHD
+# resolution: 1024x576 	# 16:9 WSVGA
+resolution: 1280x720 	# 16:9 HD
+# resolution: 1366x768 	# 16:9 FWXGA
+# resolution: 1600x900 	# 16:9 HD+
+# resolution: 1920x1080 # 16:9 Full HD
+max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
+#custom_flags:                          # You can run the Stream Services with custom flags.
+#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.