From fc459699d84726159571417dc20f19ec59a95b03 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Tue, 14 Feb 2023 20:28:37 -0500
Subject: [PATCH] Added M503 output.

---
 misc/M503-output.yml | 63 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 misc/M503-output.yml

diff --git a/misc/M503-output.yml b/misc/M503-output.yml
new file mode 100644
index 0000000..e40e282
--- /dev/null
+++ b/misc/M503-output.yml
@@ -0,0 +1,63 @@
+Recv: echo:; Linear Units:
+Recv: echo:  G21 ; (mm)
+Recv: echo:; Temperature Units:
+Recv: echo:  M149 C ; Units in Celsius
+Recv: echo:; Filament settings (Disabled):
+Recv: echo:  M200 S0 D1.75
+Recv: echo:; Steps per unit:
+Recv: echo:  M92 X80.00 Y80.00 Z800.00 E691.50
+Recv: echo:; Max feedrates (units/s):
+Recv: echo:  M203 X200.00 Y200.00 Z12.00 E120.00
+Recv: echo:; Max Acceleration (units/s2):
+Recv: echo:  M201 X1000.00 Y1000.00 Z200.00 E5000.00
+Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
+Recv: echo:  M204 P1000.00 R1250.00 T1500.00
+Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
+Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.01
+Recv: echo:; Home offset:
+Recv: echo:  M206 X0.00 Y0.00 Z0.00
+Recv: echo:; Unified Bed Leveling:
+Recv: echo:  M420 S1 Z10.00 ; Leveling ON
+Recv: Unified Bed Leveling System v1.01 active
+Recv: echo:Active Mesh Slot 0
+Recv: echo:EEPROM can hold 2 meshes.
+Recv: echo:; X-Twist Correction:
+Recv:   M423 A0.00 I110.00
+Recv:   M423 X0 Z0.00
+Recv:   M423 X1 Z0.00
+Recv:   M423 X2 Z0.00
+Recv: echo:; Material heatup parameters:
+Recv: echo:  M145 S0 H200.00 B60.00 F0
+Recv: echo:  M145 S1 H240.00 B70.00 F0
+Recv: echo:  M145 S2 H205.00 B45.00 F0
+Recv: echo:  M145 S3 H260.00 B70.00 F0
+Recv: echo:; Hotend PID:
+Recv: echo:  M301 P23.48 I2.99 D46.09
+Recv: echo:; Bed PID:
+Recv: echo:  M304 P163.96 I28.03 D639.32
+Recv: echo:; User thermistors:
+Recv: echo:  M305 P0 R4700.0 T94162.0 B4160.0 C0.000000000 ; HOTEND 0
+Recv: echo:; Power-loss recovery:
+Recv: echo:  M413 S0 ; OFF
+Recv: echo:; Z-Probe Offset:
+Recv: echo:  M851 X28.00 Y-20.00 Z-2.02 ; (mm)
+Recv: echo:; Stepper driver current:
+Recv: echo:  M906 X860 Y900 Z1000
+Recv: echo:  M906 T0 E550
+Recv: echo:; Hybrid Threshold:
+Recv: echo:  M913 X183 Y183 Z41
+Recv: echo:  M913 T0 E60
+Recv: echo:; StallGuard threshold:
+Recv: echo:  M914 X65 Y68
+Recv: echo:; Driver stepping mode:
+Recv: echo:  M569 S1 X Y Z
+Recv: echo:  M569 S1 T0 E
+Recv: echo:; Input Shaping:
+Recv: echo:  M593 X F40.00 D0.15
+Recv: echo:  M593 Y F40.00 D0.15
+Recv: echo:; Linear Advance:
+Recv: echo:  M900 K0.05
+Recv: echo:; Filament load/unload:
+Recv: echo:  M603 L0.00 U50.00 ; (mm)
+Recv: echo:; Filament runout sensor:
+Recv: echo:  M412 S0 ; Sensor OFF
\ No newline at end of file