PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-09 14:01:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjusted outline.

Browse Source
This commit is contained in:
Bassam Husain
2023-07-01 01:54:32 -04:00
parent d343f37e15
commit f65c0e6e7f
2 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
.vscode/settings.json vendored
View File

@@ -25,6 +25,7 @@
"PARKFRONT", "PARKFRONT",
"PARKFRONTLOW", "PARKFRONTLOW",
"PARKREAR", "PARKREAR",
"pico",
"Prusa", "Prusa",
"runout", "runout",
"Sovol" "Sovol"

18
README.md
View File

@@ -18,12 +18,12 @@ I am creating these files for my personal use and cannot be held responsible for
- [Features](#features) - [Features](#features)
- [Stay Up-to-Date](#stay-up-to-date) - [Stay Up-to-Date](#stay-up-to-date)
- [Preface](#preface) - [Preface](#preface)
- [Installation Steps](#installation-steps) - [Before You Begin](#before-you-begin)
- [Before You Begin](#before-you-begin) - [Electronic Wiring](#electronic-wiring)
- [Electronic Wiring](#electronic-wiring)
- [⚠️ Important Note About Stepper Motor Current](#important-note-about-stepper-motor-current) - [⚠️ Important Note About Stepper Motor Current](#important-note-about-stepper-motor-current)
- [Klipper Installation](#klipper-installation)
- [Flash Firmware](#flash-firmware) - [Flash Firmware](#flash-firmware)
- [Download Klipper Configuration](#download-klipper-configuration) - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
- [Initial Steps](#initial-steps) - [Initial Steps](#initial-steps)
1. [Adjust Configuration with MCU Path](#adjust-configuration-with-mcu-path) 1. [Adjust Configuration with MCU Path](#adjust-configuration-with-mcu-path)
2. [Configure Your Printer](#configure-your-printer) 2. [Configure Your Printer](#configure-your-printer)
@@ -59,9 +59,7 @@ Watch for releases and updates.
Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience. Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience.
## Installation Steps ## Before You Begin
### Before You Begin
- Read this documentation _fully!_ - Read this documentation _fully!_
- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned. - Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned.
@@ -75,7 +73,7 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
- Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section. - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
- I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration. - I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration.
### Electronic Wiring ## Electronic Wiring
Wire cables according to the following diagram: Wire cables according to the following diagram:
<img src="./misc/skr-mini/skr-mini-e3-v3.0-v1678580296384.png" alt='skr-mini-e3-v3.0 installation instructions'/> <img src="./misc/skr-mini/skr-mini-e3-v3.0-v1678580296384.png" alt='skr-mini-e3-v3.0 installation instructions'/>
@@ -86,6 +84,8 @@ For the SKR-Mini-E3-V3.0, the `run_current` for x, y, z stepper motors has been
💡 Although stepper motors can withstand upwards of 125C, they should at the most get hot to the touch (~55C), not _very hot_. 💡 Although stepper motors can withstand upwards of 125C, they should at the most get hot to the touch (~55C), not _very hot_.
## Klipper Installation
### Flash Firmware ### Flash Firmware
💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._ 💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._
@@ -123,7 +123,7 @@ Find instructions on how to build the firmware yourself [here](https://github.co
5. Turn on the printer and wait a minute (usually takes 10 seconds). 5. Turn on the printer and wait a minute (usually takes 10 seconds).
6. Turn off the printer and remove the microSD. 6. Turn off the printer and remove the microSD.
### Download Klipper Configuration ### Download OSS Klipper Configuration
You can choose _either_ of the 2 following methods. You can choose _either_ of the 2 following methods.