From 7908b3d0528d47b8420a788ba6cc2062639fd8c2 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Sat, 1 Jul 2023 02:12:14 -0400
Subject: [PATCH] Adjusted calibration.cfg to accept target temp.

---
 cfgs/CALIBRATION.cfg | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/cfgs/CALIBRATION.cfg b/cfgs/CALIBRATION.cfg
index 73895c7..468c704 100644
--- a/cfgs/CALIBRATION.cfg
+++ b/cfgs/CALIBRATION.cfg
@@ -1,21 +1,27 @@
 [gcode_macro PID_TEST_BED]
 gcode:
+    # Parameters
+    {% set TARGETTEMP = params.TEMP|default(70)|int %}
+    
     {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
     {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
     G28
     G90
     G1 X{max_x/2} Y{max_y/2} Z40 F6000
-    PID_CALIBRATE HEATER=heater_bed TARGET=70
+    PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}
 
 [gcode_macro PID_TEST_HOTEND]
 gcode:
+    # Parameters
+    {% set TARGETTEMP = params.TEMP|default(245)|int %}
+    
     {% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
     {% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
     G28
     G90
     G1 X{max_x/2} Y{max_y/2} Z10 F6000
     M106 S64
-    PID_CALIBRATE HEATER=extruder TARGET=245
+    PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}
 
 # TODO test this
 [gcode_macro PID_TEST_ALL]