From 5b5c58fa059f69790560d3917c4162f3268c3dc1 Mon Sep 17 00:00:00 2001 From: Bassam Husain Date: Sat, 26 Aug 2023 15:49:26 -0400 Subject: [PATCH 1/2] Adjust readme.md: add note about disabling usb 5v pin. --- .vscode/settings.json | 1 + README.md | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/.vscode/settings.json b/.vscode/settings.json index b5a1281..7ba8623 100644 --- a/.vscode/settings.json +++ b/.vscode/settings.json @@ -8,6 +8,7 @@ "cSpell.words": [ "ADXL", "blanchas", + "Buildplate", "cfgs", "Fluidd", "Fluiddpi", diff --git a/README.md b/README.md index f6634d0..6399eed 100644 --- a/README.md +++ b/README.md @@ -66,8 +66,9 @@ Although I've made switching over to Klipper as easy as is possible, it can stil - Follow the steps in order. - If an error was reported at a step, do no proceed to the next step. - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking. +- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/parts/README.md#put-tape-on-the-5v-pin) the USB cable's 5V pin. - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`. -- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh). +- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh). - Robert Redford's performance in _Spy Game (2001)_ was superb! - It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you. - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section. From c0ed25bb3a2b84457d1074cd6868b280efc72997 Mon Sep 17 00:00:00 2001 From: Bassam Husain Date: Sat, 26 Aug 2023 16:52:14 -0400 Subject: [PATCH 2/2] Adjust readme.md: many sections. --- README.md | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/README.md b/README.md index 6399eed..7586acd 100644 --- a/README.md +++ b/README.md @@ -36,7 +36,8 @@ I am creating these files for my personal use and cannot be held responsible for - 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥 - Filament runout sensor usage implemented. - Minimum configuration settings for Mainsail/Fluiddpi to work. -- SuperSlicer config bundle that contains the printer configuration, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)). Find the differences between the different print setting profiles [here](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles/tree/master/SuperSlicer). But basically, the 45 degree profile places the seam at the back. +- A SuperSlicer config bundle that contains the printer configurations for the SV06/Plus, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)). +- `NEW` A PrusaSlicer config bundle based on Ellis' SuperSlicer Profiles. - Bed model and texture to use in SuperSlicer/PrusaSlicer. - Macros - **Improved** mechanical gantry calibration/`G34` macro that provides the user audio feedback, and time to check the calibration. @@ -44,8 +45,8 @@ I am creating these files for my personal use and cannot be held responsible for - Parking macros (parks the printhead at various locations): `PARKFRONT`, `PARKFRONTLOW`, `PARKREAR`, `PARKCENTER`, `PARKBED`. - Load/unload filament macros. - `PURGE_LINE` macro. - - `NEW` `TEST_SPEED` macro. Find instructions [here](#how-do-i-use-the-test_speed-macro). -- `NEW` Klipper Adaptive Meshing & Purging (KAMP) added (disabled by default)! Read about it [here](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging). + - `NEW` `TEST_SPEED` macro. Find instructions [here](#how-do-i-use-the-test_speed-macro). +- `NEW` Klipper Adaptive Meshing & Purging (KAMP) added (disabled by default)! Read about it [here](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging). ## Stay Up-to-Date @@ -57,16 +58,16 @@ Watch for releases and updates. ## Preface -Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience. +Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and _fully read all the documentation on this page_. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience. ## Before You Begin - Read this documentation _fully!_ -- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned. +- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Beginner's would be wise to go through the steps mentioned [here](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md). Consider yourself warned. - Follow the steps in order. - If an error was reported at a step, do no proceed to the next step. - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking. -- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/parts/README.md#put-tape-on-the-5v-pin) the USB cable's 5V pin. +- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#put-tape-on-the-5v-pin) the USB cable's 5V pin. - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`. - Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh). - Robert Redford's performance in _Spy Game (2001)_ was superb! @@ -249,7 +250,7 @@ If you found my work useful, consider buying me a [