PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust PS config bundle.

Browse Source
This commit is contained in:
Bassam Husain
2023-08-23 15:41:31 -04:00
parent 3b8a598332
commit e38a647ade
1 changed files with 56 additions and 408 deletions
Download Patch File Download Diff File Expand all files Collapse all files

464
misc/PrusaSlicer_config_bundle-SV06.ini
View File

@@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 04:27:23 UTC
# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 19:39:14 UTC
[print:0.20mm QUALITY SV06 Ellis]
avoid_crossing_curled_overhangs = 0
@@ -149,7 +149,7 @@ support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
thin_walls = 1
threads = 4
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 1000
@@ -176,187 +176,11 @@ wipe_tower_x = 170
wipe_tower_y = 125
xy_size_compensation = 0
[print:Ellis_Decorative_45_Degree_15mm3]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 0.85
bridge_speed = 140
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 750
external_perimeter_extrusion_width = 0
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 115%
fill_angle = 0
fill_density = 10%
fill_pattern = gyroid
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 125%
first_layer_height = 0.3
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200
fuzzy_skin_thickness = 150
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_overlap = 25%
infill_speed = 300
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 3
post_process =
print_settings_id = Ellis - Decorative 45 Degree (15mm3/s)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = rear
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 30
solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 140%
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 45
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
thin_walls = 1
threads = 4
top_fill_pattern = monotonic
top_infill_extrusion_width = 101%
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 3500
travel_speed = 300
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:Ellis_Decorative_Standard_15mm3]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 3000
@@ -375,26 +199,26 @@ draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 750
external_perimeter_extrusion_width = 0
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 0
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 115%
extrusion_width = 0.46
fill_angle = 45
fill_density = 10%
fill_pattern = gyroid
fill_pattern = rectilinear
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 125%
first_layer_height = 0.3
first_layer_extrusion_width = 0.5
first_layer_height = 0.26
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200
fuzzy_skin_thickness = 150
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
@@ -403,10 +227,10 @@ gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_anchor_max = 400%
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_extrusion_width = 0.46
infill_first = 0
infill_overlap = 25%
infill_speed = 300
@@ -430,19 +254,19 @@ notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
overhang_speed_0 = 75%
overhang_speed_1 = 80%
overhang_speed_2 = 90%
overhang_speed_3 = 100%
overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_extrusion_width = 0.46
perimeter_generator = classic
perimeter_speed = 150
perimeters = 3
post_process =
print_settings_id = Ellis - Decorative Standard (15mm3/s)
print_settings_id = Ellis - Decorative Standard (15mm³)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
@@ -461,7 +285,7 @@ solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 140%
solid_infill_extrusion_width = 0.56
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
@@ -471,7 +295,7 @@ support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
@@ -486,7 +310,7 @@ support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
@@ -498,188 +322,12 @@ support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 1
threads = 4
top_fill_pattern = monotonic
top_infill_extrusion_width = 101%
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 3500
travel_speed = 300
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:Ellis_PIF_45_Degree_15mm3]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 5
bottom_solid_min_thickness = 1
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 0.85
bridge_speed = 140
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 750
external_perimeter_extrusion_width = 101%
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 115%
fill_angle = 0
fill_density = 40%
fill_pattern = grid
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 125%
first_layer_height = 0.3
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200
fuzzy_skin_thickness = 150
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 160%
infill_first = 0
infill_overlap = 25%
infill_speed = 300
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 4
post_process =
print_settings_id = Ellis - PIF 45 Degree (15mm3/s)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = rear
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 30
solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 140%
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 45
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
thin_walls = 1
threads = 4
top_fill_pattern = monotonic
top_infill_extrusion_width = 101%
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
@@ -708,7 +356,7 @@ xy_size_compensation = 0
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 5
bottom_solid_min_thickness = 1
bridge_acceleration = 3000
@@ -727,26 +375,26 @@ draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 750
external_perimeter_extrusion_width = 101%
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 0
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 115%
extrusion_width = 0.46
fill_angle = 45
fill_density = 40%
fill_pattern = grid
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 125%
first_layer_height = 0.3
first_layer_extrusion_width = 0.5
first_layer_height = 0.25
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 200
fuzzy_skin_thickness = 150
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
@@ -755,10 +403,10 @@ gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 3500
infill_anchor = 600%
infill_anchor_max = 0
infill_anchor_max = 400%
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 160%
infill_extrusion_width = 0.64
infill_first = 0
infill_overlap = 25%
infill_speed = 300
@@ -782,19 +430,19 @@ notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
overhang_speed_0 = 75%
overhang_speed_1 = 80%
overhang_speed_2 = 90%
overhang_speed_3 = 100%
overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 150
perimeters = 4
post_process =
print_settings_id = Ellis - PIF Standard (15mm3/s)
print_settings_id = Ellis - PIF Standard (15mm³)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
@@ -813,7 +461,7 @@ solid_infill_acceleration = 3000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 140%
solid_infill_extrusion_width = 0.56
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
@@ -823,7 +471,7 @@ support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
@@ -838,7 +486,7 @@ support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = grid
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
@@ -850,12 +498,12 @@ support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 1
threads = 4
top_fill_pattern = monotonic
top_infill_extrusion_width = 101%
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 5
@@ -2499,7 +2147,7 @@ z_offset = 0
[physical_printer:Sv06]
host_type = octoprint
preset_name = Sovol Sv06
preset_name =
preset_names = "Sovol Sv06"
print_host = http://10.0.0.51/
printer_technology = FFF
@@ -2512,9 +2160,9 @@ printhost_ssl_ignore_revoke = 0
printhost_user =
[presets]
print = Ellis_PIF_Standard_15mm3
print = Ellis_Decorative_Standard_15mm3
sla_print =
sla_material =
printer = Sovol Sv06
filament = Eryone PETG - Blue
filament = eSun PLA+ Blue
physical_printer = Sv06