From 3de5f5cf714cd2a8c31e82cc8b21e8b3f61e2741 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Wed, 13 Sep 2023 23:04:01 -0400
Subject: [PATCH 1/2] Disable KAMP.

---
 cfgs/misc-macros.cfg | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/cfgs/misc-macros.cfg b/cfgs/misc-macros.cfg
index 8eb32bc..8635f38 100644
--- a/cfgs/misc-macros.cfg
+++ b/cfgs/misc-macros.cfg
@@ -29,7 +29,7 @@ gcode:
 variable_filament_sensor_enabled: 1 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
 variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
 variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
-variable_kamp_enable: 1 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
+variable_kamp_enable: 0 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
 variable_pre_purge_prime_length: 1.40
 gcode:
     # Don't delete this section
@@ -323,4 +323,4 @@ gcode:
         G4 P{dur}
         SET_PIN PIN=beeper VALUE=0
         G4 P{dur}
-    {% endfor %}
\ No newline at end of file
+    {% endfor %}

From 4a5511b6f518bd411dfa6fa623bf3c4c5a56612e Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Wed, 13 Sep 2023 23:51:15 -0400
Subject: [PATCH 2/2] Adjust max_extrude_cross_section.

---
 printer.cfg | 1 +
 1 file changed, 1 insertion(+)

diff --git a/printer.cfg b/printer.cfg
index c1ea93b..06f8364 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -106,6 +106,7 @@ sensor_pin: PC5
 min_temp: 0
 max_temp: 300
 max_extrude_only_distance: 150.0
+max_extrude_cross_section: 5 # NOTE Uncomment this line if you intend on using KAMP purge
 pressure_advance: 0.0435 # 0.0465 # 0.044
 
 [tmc2209 extruder]