From d405db4922a4c6511312c2b78c858ace962c6f5d Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Wed, 21 Jun 2023 18:18:21 -0400
Subject: [PATCH] Adjusted mcu section.

---
 cfgs/CALIBRATION.cfg | 48 ++++++++++++++++++++++----------------------
 printer.cfg          |  4 ++--
 2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/cfgs/CALIBRATION.cfg b/cfgs/CALIBRATION.cfg
index ddae194..006e30b 100644
--- a/cfgs/CALIBRATION.cfg
+++ b/cfgs/CALIBRATION.cfg
@@ -1,39 +1,39 @@
 [gcode_macro PID_TEST_BED]
 gcode:
-  G28
-  G90
-  G1 X111 Y111 Z40 F6000
-  PID_CALIBRATE HEATER=heater_bed TARGET=70
+    G28
+    G90
+    G1 X111 Y111 Z40 F6000
+    PID_CALIBRATE HEATER=heater_bed TARGET=70
 
 [gcode_macro PID_TEST_HOTEND]
 gcode:
-  G28
-  G90
-  G1 X111 Y111 Z10 F6000
-  M106 S64
-  PID_CALIBRATE HEATER=extruder TARGET=245
+    G28
+    G90
+    G1 X111 Y111 Z10 F6000
+    M106 S64
+    PID_CALIBRATE HEATER=extruder TARGET=245
 
 # TODO test this
 [gcode_macro PID_TEST_ALL]
 gcode:
-  PID_TEST_BED
-  PID_TEST_HOTEND
-  SAVE_CONFIG
+    PID_TEST_BED
+    PID_TEST_HOTEND
+    SAVE_CONFIG
 
 [gcode_macro DO_PROBE_CALIBRATE]
 gcode:
-  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
-  SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
-  TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
-  TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
-  G28
-  PROBE_CALIBRATE
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
+    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
+    TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
+    G28
+    PROBE_CALIBRATE
 
 [gcode_macro DO_CREATE_MESH]
 gcode:
-  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
-  SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
-  TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
-  TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
-  G28
-  BED_MESH_CALIBRATE
\ No newline at end of file
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
+    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
+    TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
+    G28
+    BED_MESH_CALIBRATE
\ No newline at end of file
diff --git a/printer.cfg b/printer.cfg
index bd391d2..f7462d9 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -15,8 +15,8 @@
 # [include ./cfgs/adxl-direct.cfg]
 
 [mcu]
-# NOTE Obtain definition by "ls -l /dev/serial/by-id/"
-serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+# NOTE Obtain definition by "ls -l /dev/serial/by-path/" or "ls -l /dev/serial/by-id/"
+serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2:1.0-port0
 restart_method: command
 
 [printer]