PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into skr-mini-e3-v3

Browse Source
This commit is contained in:
Bassam Husain
2023-07-01 01:42:20 -04:00
parent d3713903a3 bb90be25cc
commit d343f37e15
3 changed files with 49 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

43
cfgs/CALIBRATION.cfg Normal file
View File

@@ -0,0 +1,43 @@
[gcode_macro PID_TEST_BED]
gcode:
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
G28
G90
G1 X{max_x/2} Y{max_y/2} Z40 F6000
PID_CALIBRATE HEATER=heater_bed TARGET=70
[gcode_macro PID_TEST_HOTEND]
gcode:
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
G28
G90
G1 X{max_x/2} Y{max_y/2} Z10 F6000
M106 S64
PID_CALIBRATE HEATER=extruder TARGET=245
# TODO test this
[gcode_macro PID_TEST_ALL]
gcode:
PID_TEST_BED
PID_TEST_HOTEND
SAVE_CONFIG
[gcode_macro DO_PROBE_CALIBRATE]
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
G28
PROBE_CALIBRATE
[gcode_macro DO_CREATE_MESH]
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
G28
BED_MESH_CALIBRATE

8
cfgs/misc-macros.cfg
View File

@@ -32,6 +32,7 @@ variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere ex
variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
variable_pre_purge_prime_length: 1.40
gcode:
# DELETEME This section is unnecessary
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
@@ -88,10 +89,7 @@ gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# Get Boundaries
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
# Misc variables
{% set extrudeAmount = 26.6 %}
{% set movementLength = 100.0 %}
{% set movementSpeed = 15 * 60 %}
@@ -109,7 +107,7 @@ gcode:
M83 ; Relative extrusion mode
G1 E{PRE_PURGE_PRIME_LENGTH} F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed} ; intro line 1
#G1 E-.5 F2100 # Retract
G92 E0.0 ; reset extruder
M82 ; Absolute extrusion mode
G1 Z5.0 ; move nozzle to prevent scratch